Massive Upload Volume - Analog X Net-stat Shows 0
Oct 30, 2011
For 10 days, I have had massive upload volumes (2 - 7 GB) per day on my home network, not sure why. I am not downloading streaming video or any videos. We have several computers on our network, and I am not sure which one is diong all of this uploading. So, I installed AnalogX Netstat version 2.15 to monitor the stats on my computer, and it shows all totals for incoming and outgoing are "0kb", which I know isn't true.Why isn't it measuring my transmission? I am running Windows 7.
It shows local machine IP x.x.x.x, device All TCP/IP devices, and "remote" worked - I was able to ping url..successfully. But no stats are being measured at all. Not even CPU usage.
View 1 Replies
ADVERTISEMENT
Jun 4, 2013
I've enabled RDP on a laptop, but I can't connect to it. Pinging the laptop works. nmap shows ports open, but not RDP. netstat on the laptop shows nothing listening on 3389. I've also tried rebooting. [code]
View 1 Replies
View Related
Aug 29, 2011
Can I get a modem that calls using analog and once it reaches my ISP it converts to 64K?
View 1 Replies
View Related
Feb 20, 2011
I have two cisco 2821 routers (12.4(3a)) doing IPSec and I would like to graph (using SNMP) some counters which are shown using "show crypto engine accel stat", however, I have not been able to find which MIB resp. OID I need to acces.
View 9 Replies
View Related
Nov 22, 2012
Is there anyway to limit a user's traffic volume on ASA8.4? if there is, how?
View 3 Replies
View Related
Jan 23, 2012
I took my tv off of the cable, and am watching the Analog channels. Is there a way I can freely watch like USA HD, and such? Also, I have comcast I was going to watch stuff over the internet is there a way around minus switching to business class from comcast to not count toward bandwith?
View 4 Replies
View Related
Mar 14, 2013
Is it possible to connect an analog phone to an FXS port on a CME router and a VoIP phone to a switch connected to said router and have voice connectivity between the phones? Also, is it possible to connect an FXO port on that same CME to a RJ-11 wall jack to connect to the PSTN and be able to call that VoIP phone as well as the analog phone from my cellphone? I'm trying to tie as I read the CCNA Voice OCG.
View 5 Replies
View Related
Sep 30, 2012
i got the echolife HG520b with this weird problem that's bugging me a lot nowadays which is disconnection. The internet light bulb always go off and the internet cuts every 5-10 minutes. I've tried to reboot with factory settings but it didn't work.
View 6 Replies
View Related
Mar 1, 2012
One of the file servers in your office is running out of space on the D: volume. There is unallocated space available on the same disk as the D: volume, as well as on other disks.What option should you choose to reduce administrative effort and minimize the chance of volume failure?
View 3 Replies
View Related
Jan 29, 2013
Yesterday I had BT Infinity fitted and my main PC (Wired) shows download speed of 70 megs but my laptop only gets around 4 megs download yet 5-6 megs upload.
View 1 Replies
View Related
Jul 10, 2012
I have a 1941 Cisco router with WIC-!AM-V2 card that is uning pots( regural phone ) line for data traffic.the problem I am having is the line is establishing connection but it intermittently dropos.The router is configured to dial to Centraal office and I have more that 100 other locations with the same setup that are working fine. The only differene on htis one is it is going thru a PBX line.
View 1 Replies
View Related
Feb 19, 2012
For a customer of mine I've installed 8 WAP 200 access points with an SF302 switch. The Access point are powered with POE. All seems to function properly: the clients are simple Android device and the connection appears solid.. We've a good roaming between access points (not seamless of course but is ok) and no particalur problems, also because the network is used to drive very LOW data (no internet): the clients opens a tcp connection to the server and sends only a keep alive packets over this connection.. Then sometime the server send a very small amount of data (some byte) to activate the display of the device and show a question.. the clients reply with some other byte of data and so on.. During an event of 3/4 hour we can do this 12/14 times, so the network load is nearly 0....
Last night the system suddenly stopped working: ALL clients (300) lost connection from their access points at the same time! How this can happens? The only reason that I can imagine is a power loss on the switch...
View 1 Replies
View Related
Dec 21, 2012
Is there a more detailed log or information from the router?I'm still having massive network variations, even with everything wire connected.
View 1 Replies
View Related
Oct 15, 2012
I Have asa 5520 with the code 8.0, the mem shows 94% and the CPU shows 85%
View 5 Replies
View Related
Jan 24, 2012
I plan on starting a high speed LAN for my Gaming LAN party's. We send 100's of GB of data over our LAN networking when we do this, so i need a good switch that can handle the stress of the massive data transfers. It needs to be a gigabit switch and at least 8 RJ45 ports.or is there a different one i should get all together? i cant spend a butt load. url...
View 3 Replies
View Related
Jan 12, 2010
We have several site-to-site IPSec VPN's setup.
All are running on ASA's 8.2(1).
All have a Security Association Lifetime (Time) of 8 hours.
All have a Security Association Lifetime (Traffic Volum) of 4608000 KiloBytes.
We have an issue when we do Oracle logshipping between the sites.
This triggers the Traffic Volume rekey as can be seen by this entry in the logs: -
%ASA-7-702307: IPSEC: An inbound L2L SA (SPI= 0x169FA1C1) between and (user= ) is rekeying due to data rollover.
However it does not appear as if the renegotiation is occurring properly. Within 10 to 15 minutes data stops being transmitted along the link, even though the IPSec tunnel still appears up in the ASDM GUI.
The 'fix' for this is that we are using is to login to the ASDM GUI and bounce the link by going to Monitoring => VPN => VPN Statistics => Sessions => IPSec Site-to-Site. Then select the appropriate VPN tunnel and click on 'Logout'. This forces a link renegotiation which works fine.
I have attached a logfile from the local ASA (there's nothing in the logfile of the remote ASA until we bounce the VPN tunnel).
View 10 Replies
View Related
Jun 30, 2011
I just upgraded my cable modem from the Motorola Sufboard 5120 to the DOCSIS 3.0 capable 6120. Provisioned it with Comcast and their "Blast" service (supposedly it caps at 16 down, 2 up).
I had, in the past, used my desktop via N-format wireless (DWA-525 N-format PCI adapter and DIR-655 N-format router) to do a speedtest.net test. I was getting 16 down and 2 up (as advertised). When I switched to the 6120, I did a speedtest.net test again to see what kind of gains, if any, I was getting. Turns out, I was getting 20+ down (nice improvement) and 1/2 Mbps up (a fourth of what I used to be getting?). Called Comcast. They "sent signals" (don't they always?) and claimed that it fixed it. My download speeds increased a smidge (about 22), but my upload speeds were still .5. Called Motorola, they had me do a few things and now I get 1 Mbps up and 27 - 30 down via wireless.
My download speeds are great. I'm content with that. If I hardwire from the cable modem directly to a ****py old laptop, a speedtest.net shows 4 Mbps up. So why do I get such a high upload speed when hardwired (4 Mbps), but a fraction of it (1/4th) when wireless? I'm not using any other devices to sap bandwidth (some are connected -- i.e. another desktop, my Droid phone, etc., but aren't actively pulling packets). And why would it go from 2 up (on my desktop via wireless in the past) to only 1 up (via wireless now) when the setup is the same across the board (as best I recall) other than upgrading my cable modem.
Since I get 4 up when hardwired straight off the cable modem, I assume my DIR-655 is slowing me down somehow. How to pick up the pace a bit? I've already tried the standard "power cycling", etc.
Oh, and the reason I go wireless -- my cable modem and wireless router are in my game room in the basement for my PS3. My desktop computer (and the wife's desktop computer) are two floors directly above it in our "office". Signal strength is "excellent" ... always has been. And again, pretty much everything is the same.
[URL]
View 12 Replies
View Related
Sep 12, 2012
I recently switched from wireless connection to a normal one because i had speed issues with my internet but since then i can download just fine, even faster than before, but my computer seems to be unable to upload any data on the internet. I mean i go on skype and talk to my friends but when i have to upload a .jpg or i want to send somebody a message with bigger content than 5 KB it just keeps uploading but does nothing. I searched for virus and even disabled my firewall but it doesn't seem to work.
View 5 Replies
View Related
Apr 3, 2013
I have 50GB storage on box.com and DropBox.So i just want to back up my files there.Web interface just sucks and offers no customization.Their desktop programs are only to sync, and dont do much to just upload.I dont wanna sync folders, i just want to upload files!
View 13 Replies
View Related
Dec 11, 2011
I'm just wondering how I would get a faster upload rate. Is it my modem? Is it my internet connection? At the moment my upload rate is
View 4 Replies
View Related
Jun 4, 2011
I was uploading a big 2gb file to my FTP server, it was all going good and I managed to upload the whole thing hassle free. After I finish I log out, and return about 3 hours later and try to log back in, to no avail.WinSCP gives me the following error:
[code]....
View 1 Replies
View Related
Apr 5, 2012
I ru n the speed test from my desktop and laptop and the download speed are in the same range in both pc's, around 20mb/s. However the upload speed is higher in the laptop (around 4 mb/s) compared the desktop (300 kb/s)My connection is supposed to run at 50 mb/s and 5mb/s?
View 9 Replies
View Related
Oct 27, 2011
I was wondering why my upload speed btw the test. and reading this forum post: Sudden slow upload speed?
View 1 Replies
View Related
Apr 18, 2012
Uploading keeps switching from ridiculously slow to nonexistent. When it's ridiculously slow, it can take 5-10 minutes to upload a 100kb photo. When it's nonexistent, it basically disables my connection, and the only way to get it back is to reboot. It doesn't seem to matter what website I'm on; anything from uploading a photo to Facebook to trying to attach a file to Gmail does not work. It's definitely computer-specific, because I have a second laptop on the same network that uploads just fine.
[code]...
View 19 Replies
View Related
Aug 12, 2012
My new computer can't upload any of my files like in facebook and yahoo. I try some speed test, download is okay but upload is not. I turned off my firewall and nothing happens.
here's my ipconfig /all
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
D:WINDOWS>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jethron
Primary Dns Suffix . . . . . . . :
[code]....
View 2 Replies
View Related
Jun 13, 2012
I want to upload flash from a sever, as if I was uploading with flash, instead of a browser. I was told something about rfc..(Flash download request)Anyways, is their any sites, etc, that I can use?
View 2 Replies
View Related
Nov 3, 2011
I've not been able to upload anything on this computer now since about July that's more than a few kb. This has been since I reformatted the hard drive.That means:
1. I can't attach anything to an e-mail
2. I can't upload anything to fb
3. I can't upload anything to sendspace etc.
The problem is only on this computer. I've tried the router on another computer and I can upload on that. I have tried the following:
1. Turned off Firewalls.
2. Turned off Norton Antivirus.
Nothing. I am on Vista and there are no additional service packs downloaded.I have also tried the speedtest site. It is unable to do the "upload" test. Downloads are fine.
View 19 Replies
View Related
Jun 2, 2011
upload configuration to the Cisco 877? normaly i am using the TFTP server,
View 30 Replies
View Related
Jan 26, 2012
I tried to use a different proxy but couldn't access internet at all. it seems all the LAN traffic is forced to go through the LAN proxy.
View 2 Replies
View Related
Dec 9, 2011
About 2 months or so ago, my upload speed just pretty much stopped working. Nothing changed with my PC/modem/router, so I don't know what happened. My download speed is FINE, fast like it's always been(over 20 Mbps). I can upload a file maybe 500KB or lower, but it takes several minutes. If I try to upload anything bigger, it doesn't work(errors/gets stuck).
It's not my PC because I have the same problem on my tablet and ipod. It's not the router because I tested it by just hooking up the modem directly to my PC.
At speedtest.net, it just gets stuck on the upload test and never gives me results.
I rent my modem from Comcast. Should I just bring this modem in and get a new one?
View 7 Replies
View Related
Jun 24, 2011
I can't upload on file-sharing sites , I have tried to upload on wupload.com , fileserve.com , ****file.com and other sites and I click to upload but the progress don't start only stay in 0% I have waited 3 hours to upload a music with 150 MB and still in 0% progress .
View 5 Replies
View Related
Jun 27, 2012
This is the first PC I have ever built, but I built it with a buddy who is very experienced and everything went okay. The computer is maybe 3-4 weeks old now, everything is running fine, until today when I decided I wanted to try streaming some Diablo 3.This is when I discovered my upload speed was absolute garbage.I have verizon FIOS - I pay for 15/5, the download speed is always at 20+ mbps, I have never had any problems with it., but my upload speed is fluctuating between .34-1.5 mbps, changing every second.I know this is a problem with the computer because I brought in my old laptop, unplugged the ethernet from my new desktop, plugged it into the laptop in order to keep all variables the same, and it was getting 25/5 without any hesitation.When I was downloading the drivers for my mobo I installed something called Windows Firewall with Advanced Security(maybe that was with a windows update, im not sure).
Specs of my PC (if this matters)
-Asus P8Z77-V LK
-8g ddr3 Ripjaws
-i7 2700k
-Corsair H60
-EVGA GTX 670
-Crucial 128g M4 SSD
-Caviar Blue 1TB HDD
-750W OCZ Modular PSU
View 5 Replies
View Related
Dec 9, 2012
I bought comcast xfinity internet about a month ago, and I cannot get any upload speed. It's jammed up at about .40, and I'm paying for 3-4 mbs. My plan is 15/3, but the download speed is always over 20 mbs, while the upload is .40.
Comcast has been here twice with two new modems, and ran brand new cable under the house, because they said the signal was weak. Now it's strong, the modem is fine, and there is STILL no upload. I can barely upload pics to photobucket. Comcast basically told me there is nothing wrong on their end, and there is nothing they can do. The signal is strong, the modem is fine, the cabling is fine, and they are providing their service on their end.
[code]...
View 12 Replies
View Related
