Servers :: LAN Proxy Does Not Support Ftp Upload
Jan 26, 2012I tried to use a different proxy but couldn't access internet at all. it seems all the LAN traffic is forced to go through the LAN proxy.
View 2 RepliesI tried to use a different proxy but couldn't access internet at all. it seems all the LAN traffic is forced to go through the LAN proxy.
View 2 Replieshow to trace IP when proxy is used.someone I know is playing a prank that might cause my marriage to break.That person uses proxy with many different IP and also a loopback. does anyone know how to trace the IP even with the above is used.
View 2 Replies View RelatedI have an issue here, I need to connect to various anonymus proxy servers, the ip's of which can be freely found on the web. I've tried doing this from a broadband connected computer and it's ok, but the thing is that when I try doing this from a computer that is tied to o router, it doesn't work at all.
View 3 Replies View RelatedI have a linux(fedora) which i use as a proxy. the proxy then connect to the router. the proxy also serves as my mail server (i use postfix). Problem is, since yesterday i discovered thta i cannot access the internet for any machine connected via the proxy (and any dhcp-assigned machines). As a result, even the webmail is not accessible from any machine.When i tried, i changed some computers so that they connect directly to the router -and they work fine for the internet. Problem is, I am still not able to access webmail.What could be the problem with the proxy.?(NB Postfix is running and http too is running).
View 6 Replies View Relatedi m accessing ftp using vpn. there also have proxy server but i want to know how to configure proxy ip in my system.
View 1 Replies View Relatedhow to make a proxy server in o.s server 2003
View 1 Replies View RelatedMy son is constantly on social networking sites whilst he ought to be revising for his exams. I have tried blocking his websites from the router but this blocks everyones access to the sites. How can I prevent just him from accessing these sites through the router without interfering with my elder kids acess to the sites? Also i would like to know how to block all proxy servers as he is always using these to bypass my restrictions.
View 5 Replies View RelatedWhen i access a url with http, it works fine. But with https it dosen't work, and get the message on the firefox as "The proxy server is refusing connections Firefox is configured to use a proxy server that is refusing connections. Check the proxy settings to make sure that they are correct. Contact your network administrator to make sure the proxy server is working.
View 1 Replies View RelatedIs the OVA available for download on Cisco's website compatible with anything outside VMWare? For example, Red Hat Virtualization for Servers.
View 1 Replies View RelatedI would like to connect devices to my network so that their traffic passes through a proxy running on my computer. I figured the best way to do this is by setting the proxy on my router to the one I am running, but then I would need to have another connection to the computer running the proxy or else there would be an infinite loop ?? something like that. so:
Internet -> router (1) -> my proxy on comp A -> router (2) -> computer B
I access the internet from my company�s LAN, which has a restrictive firewall, so I cannot request the admin to open any ports manually for me. Hence I use a software called your-freedom. This proxy software supports both http as well as socks 4 and 5 proxy (by entering the proxy IP 127.0.0.1 (localhost) and Port 8080 for http proxy OR 1080 for Socks Proxy), and I have successfully been using web browsers and some other softwares that support proxy/ allow proxy info to be entered to login/ connect to the internet. Your-Freedom also supports port forwarding.However, the softwares I intend to use do not have any options to enter proxy methods or proxy ports (as far as I have noticed). I have tried to proxify these 2 softwares using softwares such as SocksCap and Free Cap, but either they don�t work, or my settings in proxifying are not correct. I believe I will have to do port forwarding or proxify the softwares, but have been unable to do so in the correct manner.
Following is the info on the 2 softwares:
1.NOW Trading terminal:[FONT=Times New Roman]Normally when I start the NOW or Zerodha software, the software starts and I get a login screen, but under firewall conditions, I get the initial Splash screen but then the software stops with the error: [b][u]NOW Initialisation failed for Interactive Engine << os error>>.
2.PowerIndia Bulls:The software is written in Java and starts with a batch file (PowerIndiabulls.bat) located in C:UsersDEFAULT_USERNAMEAppD..... I converted this batch file to .exe (with battoexe software) and then ran it through a proxifying software. The .exe start properly without proxifying software but not under proxifying environment. Basically the software needs to connect to the internet using Port 443. I am also expected to keep ports 443, 41599 and 59598 open. software's requirement is available at Indiabulls Securities: Indiabulls Securities is a leading capital market company offering securities broking and advisory services, depository services, equity research services to its clients in India. (item no. 5).To confirm, while the software is unable to connect through port 443, you will get an error message: "Connection to Login Server could not be established" when you try to login with any random Username and Password.To know that the software is able to connect properly, you will get an error: "This User ID is not enabled to be used with this product".
Anyone know the differnce between these two on a MLS? Seems that proxy arp as I know it works with or without the 'local' version.
View 7 Replies View RelatedI just upgraded my cable modem from the Motorola Sufboard 5120 to the DOCSIS 3.0 capable 6120. Provisioned it with Comcast and their "Blast" service (supposedly it caps at 16 down, 2 up).
I had, in the past, used my desktop via N-format wireless (DWA-525 N-format PCI adapter and DIR-655 N-format router) to do a speedtest.net test. I was getting 16 down and 2 up (as advertised). When I switched to the 6120, I did a speedtest.net test again to see what kind of gains, if any, I was getting. Turns out, I was getting 20+ down (nice improvement) and 1/2 Mbps up (a fourth of what I used to be getting?). Called Comcast. They "sent signals" (don't they always?) and claimed that it fixed it. My download speeds increased a smidge (about 22), but my upload speeds were still .5. Called Motorola, they had me do a few things and now I get 1 Mbps up and 27 - 30 down via wireless.
My download speeds are great. I'm content with that. If I hardwire from the cable modem directly to a ****py old laptop, a speedtest.net shows 4 Mbps up. So why do I get such a high upload speed when hardwired (4 Mbps), but a fraction of it (1/4th) when wireless? I'm not using any other devices to sap bandwidth (some are connected -- i.e. another desktop, my Droid phone, etc., but aren't actively pulling packets). And why would it go from 2 up (on my desktop via wireless in the past) to only 1 up (via wireless now) when the setup is the same across the board (as best I recall) other than upgrading my cable modem.
Since I get 4 up when hardwired straight off the cable modem, I assume my DIR-655 is slowing me down somehow. How to pick up the pace a bit? I've already tried the standard "power cycling", etc.
Oh, and the reason I go wireless -- my cable modem and wireless router are in my game room in the basement for my PS3. My desktop computer (and the wife's desktop computer) are two floors directly above it in our "office". Signal strength is "excellent" ... always has been. And again, pretty much everything is the same.
[URL]
We are planning to split the Private servers from the DMZ Servers and configure an additional Interface and segment for this purpose.
Private Servers Segment: 192.168.4.0/24 (there is no DHCP all servers' IPs are statically configured)
DMZ Segment: 192.168.3.0/24 (This is a future deployment)
LAN Segment: 172.17.0.0/16
Both, Private Servers and DMZ Servers are in a collocation as well as the ASA5520. There are multiple Branch offices that uses subnets within the 172.17.0.0/16 Network and they are connected to the ASA5520 via Metro-E.
I do not know if this is possible but what I want to do is this:
In order to avoid the change of internal DNS records I want to mask the DMZ servers with a Private Server IP when a Private server or LAN host wants to access it like this:
The FTP server in the DMZ has the IP address: 192.168.3.100. But when a PC from the LAN wants to reach the FTP server it should points to its old IP: 192.168.4.100. This way the PC sends a packet to the ftp.corporate.net (192.168.4.100) the ASA recieves the packet and translate it to the (192.168.3.100) and send it out through the DMZ Interface.
Also if the Private Servers wants to reach the same FTP the ASA will act like a proxy-ARP and send the paquet to the DMZ by means of the translation of the IP.
i'm trying to connect 5 servers together to create a private network.Each server has a network of it's own and i'm trying to make all 5 servers communicate with each other to share and search data simultaneously..
View 16 Replies View RelatedI Have exented vlan 120,121 from DC-1 to DC-2,the DC-1 and DC-2 are connected using L2 Trunk over fiber terminated on Cisco 6513 on both site ,the distance around 40 Km ,on the DC-2 i just assigned server-1 TO VLAN 120 while server-2 in vlan 121 ,but these servers unable to communicate neither with DC-1 Servers or betwen them locally on DC-2 ,pls note that the servers at dc-2 rely on DC-1 for routing.
View 7 Replies View RelatedI recently switched from wireless connection to a normal one because i had speed issues with my internet but since then i can download just fine, even faster than before, but my computer seems to be unable to upload any data on the internet. I mean i go on skype and talk to my friends but when i have to upload a .jpg or i want to send somebody a message with bigger content than 5 KB it just keeps uploading but does nothing. I searched for virus and even disabled my firewall but it doesn't seem to work.
View 5 Replies View Relatedcan wireless router support up to 100 user including support network printer
View 1 Replies View RelatedI have 50GB storage on box.com and DropBox.So i just want to back up my files there.Web interface just sucks and offers no customization.Their desktop programs are only to sync, and dont do much to just upload.I dont wanna sync folders, i just want to upload files!
View 13 Replies View RelatedI'm just wondering how I would get a faster upload rate. Is it my modem? Is it my internet connection? At the moment my upload rate is
View 4 Replies View RelatedI was uploading a big 2gb file to my FTP server, it was all going good and I managed to upload the whole thing hassle free. After I finish I log out, and return about 3 hours later and try to log back in, to no avail.WinSCP gives me the following error:
[code]....
I ru n the speed test from my desktop and laptop and the download speed are in the same range in both pc's, around 20mb/s. However the upload speed is higher in the laptop (around 4 mb/s) compared the desktop (300 kb/s)My connection is supposed to run at 50 mb/s and 5mb/s?
View 9 Replies View RelatedI was wondering why my upload speed btw the test. and reading this forum post: Sudden slow upload speed?
View 1 Replies View RelatedUploading keeps switching from ridiculously slow to nonexistent. When it's ridiculously slow, it can take 5-10 minutes to upload a 100kb photo. When it's nonexistent, it basically disables my connection, and the only way to get it back is to reboot. It doesn't seem to matter what website I'm on; anything from uploading a photo to Facebook to trying to attach a file to Gmail does not work. It's definitely computer-specific, because I have a second laptop on the same network that uploads just fine.
[code]...
My new computer can't upload any of my files like in facebook and yahoo. I try some speed test, download is okay but upload is not. I turned off my firewall and nothing happens.
here's my ipconfig /all
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
D:WINDOWS>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : jethron
Primary Dns Suffix . . . . . . . :
[code]....
I want to upload flash from a sever, as if I was uploading with flash, instead of a browser. I was told something about rfc..(Flash download request)Anyways, is their any sites, etc, that I can use?
View 2 Replies View RelatedI've not been able to upload anything on this computer now since about July that's more than a few kb. This has been since I reformatted the hard drive.That means:
1. I can't attach anything to an e-mail
2. I can't upload anything to fb
3. I can't upload anything to sendspace etc.
The problem is only on this computer. I've tried the router on another computer and I can upload on that. I have tried the following:
1. Turned off Firewalls.
2. Turned off Norton Antivirus.
Nothing. I am on Vista and there are no additional service packs downloaded.I have also tried the speedtest site. It is unable to do the "upload" test. Downloads are fine.
upload configuration to the Cisco 877? normaly i am using the TFTP server,
View 30 Replies View RelatedAbout 2 months or so ago, my upload speed just pretty much stopped working. Nothing changed with my PC/modem/router, so I don't know what happened. My download speed is FINE, fast like it's always been(over 20 Mbps). I can upload a file maybe 500KB or lower, but it takes several minutes. If I try to upload anything bigger, it doesn't work(errors/gets stuck).
It's not my PC because I have the same problem on my tablet and ipod. It's not the router because I tested it by just hooking up the modem directly to my PC.
At speedtest.net, it just gets stuck on the upload test and never gives me results.
I rent my modem from Comcast. Should I just bring this modem in and get a new one?
I can't upload on file-sharing sites , I have tried to upload on wupload.com , fileserve.com , ****file.com and other sites and I click to upload but the progress don't start only stay in 0% I have waited 3 hours to upload a music with 150 MB and still in 0% progress .
View 5 Replies View RelatedThis is the first PC I have ever built, but I built it with a buddy who is very experienced and everything went okay. The computer is maybe 3-4 weeks old now, everything is running fine, until today when I decided I wanted to try streaming some Diablo 3.This is when I discovered my upload speed was absolute garbage.I have verizon FIOS - I pay for 15/5, the download speed is always at 20+ mbps, I have never had any problems with it., but my upload speed is fluctuating between .34-1.5 mbps, changing every second.I know this is a problem with the computer because I brought in my old laptop, unplugged the ethernet from my new desktop, plugged it into the laptop in order to keep all variables the same, and it was getting 25/5 without any hesitation.When I was downloading the drivers for my mobo I installed something called Windows Firewall with Advanced Security(maybe that was with a windows update, im not sure).
Specs of my PC (if this matters)
-Asus P8Z77-V LK
-8g ddr3 Ripjaws
-i7 2700k
-Corsair H60
-EVGA GTX 670
-Crucial 128g M4 SSD
-Caviar Blue 1TB HDD
-750W OCZ Modular PSU
I bought comcast xfinity internet about a month ago, and I cannot get any upload speed. It's jammed up at about .40, and I'm paying for 3-4 mbs. My plan is 15/3, but the download speed is always over 20 mbs, while the upload is .40.
Comcast has been here twice with two new modems, and ran brand new cable under the house, because they said the signal was weak. Now it's strong, the modem is fine, and there is STILL no upload. I can barely upload pics to photobucket. Comcast basically told me there is nothing wrong on their end, and there is nothing they can do. The signal is strong, the modem is fine, the cabling is fine, and they are providing their service on their end.
[code]...
I uploaded an .avi media file, which filled 2.81GB and it took me 7 hours!I was like holy ***, how is it even possible for it to take so long time for an file that only fills 2.81GB?
View 4 Replies View Related