Compaq C700 Notebook running Windows Vista Home Premium SP2.Currently using DSL network and switching to cable modem with Linksys E1000 wireless router.When connecting to the router, it comes up as unidentified network and public. I can customize to change to private, but does not allow to change name.If I delete my current DSL Network, on start up I get a windows defender alert of whether it is a trusted, standard or public network. Then I get another pop up asking to call it Home, Work or Public.With the cable router and wireless modem, I don't get any thing from windows defender or network and sharing center.
I've been searching the Internet all day for drivers for this Notebook and have found most of them, but need two more. I can't get online.
It's a Windows XP Professional OS but I cannot get online without an Ethernet Controller driver, which I still haven't been able to find. I also need a Multimedia Audio Controller.
It's an old notebook but has hardly been used. The specs are as follows:
Intel[R] Pentium[R] M processor 1.73Ghz 795 MHz,0.99 GB of RAM Physical Address Extension
I still have the original Windows XP Professional disk find these two drivers? I've searched every HP Compaq driver site I could find to not avail.
i got a compaq mini cq10 400sa given to me by my friend for the mean time as my laptop has stopped working. it runs on windows 7. it is not detecting any wireless network whatsoever.
I have an ancient Compaq V2410 notebook which has started to drop my home Wifi connection recently (started about a week ago). At first, I thought it was the install of Firefox 8 as it froze and crashed but it happens with Chrome, IE and even when not running a browser.
My ISP is O2 in the UK and I have a DSL2+ service with the O2 Wireless Box II. I have gone through a power down cycle on the router and it continues to work with my ethernet-connected desktop PC. I have changed the Wireless Card in the notebook but fault is still intermittent. The notebook was also set to OpenDNS servers but that has been set back to Automatic DNS servers.
The notebook has the latest free versions of Avast Anti-virus & Comodo Firewall and the main issue is that the notebook has 640Mb system RAM which means that various Windows services have been Disabled or set to Manual.
I can sometimes recover the Wifi signal by switching the wireless on/off but it is sporadic. I have attached the Xirrus WiFi screenshots at startup, at fault state and at recovery state together with the ipconfig.txt output.
My modem CAN connect to the Internet but my router CANNOT. I've called my ISP (Brighthouse) and went through a whole process of bypassing the router, restarting the modem for 2 minutes, and restarting the router for 30 seconds. Then I even got assistance from the router's maker (Linksys) by switching the IP address of the router, they said this could be the issue if my modem had the same IP address. I switched it to 192.168.2.1, but still no luck. I do not know what to do now. The new router is a Linksys E1000. I haven't got the specs of my modem yet.
I own a E1000 router that I use with several wireless machines. Unfortunately, I cannot connect to the configuration of the router by typing url...in a browser, be it wireless or weirdly. For example, Firefox displays "Connection has been reinitialized". Furthermore, when I launch Cisco Connect, it only shows the error "Unable to connect to router". I tried to switch my router off and on, but that doesn't work. Totally resetting the router solves the problem, but not definitely.Is there a solution that does not require resetting my router?
When I connect my modem directly to my computer (modem > computer) it works just fine, internet connects and everything through the direct ethernet connection.But when I connect the modem to the router and then try to connect wireless with any other computer (modem > router > wireless) nothing works. Not even when I have it connected directly from the router to the ethernet on the main computer. (Which has ALWAYS worked until now.
However, my 13" Macbook (running Lion) sometimes finds if hard to connect after I turn it on. I will have to continously turn off and on the wifi of the macbook to have it force to look at wifi networks. It will not be able to see also other wifi networks which are present in my neighbors which my windows 7 and other machines can see. After playing around with it I found that the macbook will connect to wifi only after I connect it momentarily via cable. I do this everytime I turn on my macbook.I just upgraded to a Macbook Pro running on Lion and the same thing happened. I tried the same solution of connecting first via cable but to my disappointment, would not see any wifi network including my neighbor's which again the other machines can see. So I am stuck with using cable for now.
My e1000 was working fine until it was accidentally unplugged. Now it doesn't work. I downloaded the set up program from the site and tried to run it, but it does not recognize an internet connection when I have the modem connected to the router and the router connected to the PC. The internet works when I connect the modem directly to the PC. I have unplugged everything and restarted the PC several times and tried running the software again, but no dice.
Just got the new Linksys E1000, and follow the Cisco Connect to setup. No IP received from the service provider (which is Fibre-to-the-building, no modem is required). Goto the setup page and confirmed that the connection type is "DHCP".Once i unplug the cable from E1000 (internet port) and plug into my old wireless router, everything work nicely. The internet connection & cable itself seems fine. Switch the cable into notebook, and get the IP as well, it seems the service provider didn't lock the mac address of the devices (routuer nor PC). Cloned the mac address but nothing improved.Tried release the IP before unplug from the old router, switch off old router, and wait 10mins before connected to E1000 but still no luck.
when i go on my iphone and click on the wirless network i just set up, it does not ask me for a password. instead i get a screen titled "IP Address" with three buttons below (dhcp, bootp, and static) with a list of blanks for ip address, subnet mask, router, dns, etc. below that.
I have a new Linksys E1000, and I would like to connect my HP 2035 Laserjet to the router, avoiding connecting it directly to my desktop (wired to the router) or my laptop (wireless). When I connect the Ethernet cable to the printer and the router?Both PCs are running XP, and the printer was connected to the laptop before I got the wireless router.
I just installed my Linksys E1000 and it seemed really easy. I allows the Guest Option, named the Network and put in a network Password. When I try to connect the phone, I don't get the screen on the phone that asks for the PW. I can connect as a guest, but it does connect with out even asking the guest password.
I currently have an E1000 connected to my cable modem in my living room. It provides wireless access to my whole household.
I have a set of computers I want to have set up as a lab on their own router and have a WRT54GS available for me to modify.
The WRT is in the dining room (office) and the cable modem/E1000 are about 45 feet away.
I want to set up the wireless environment on the E1000 as 192.168.1.1-24 and the wired network as 192.168.2.1-24 with the wired network being able to wirelessly connect to the wired so all the machines in the house can see my server and other machines.
I own an E1000. It is hooked up to a Motorola cable modem via Comcast. I have a personal website sohebvahora.com (still under construction) where I use cpanel to administer it. I somehow lost all connectivity to my website midday and have not been able to connect back to it in a few days. Every other site I have gone to works except mine. It doesn't make sense.Also, I tried connecting my laptop directly to the Motorola modem and my personal site loads, so it has to be the router. I have tried different devices connected to the router as well, like my ipad, iphone, and other laptops, but the website doesnt load on them either
E1000. Setup Acer laptop with router and it is working fine. However I do not have Cisco Connect on the computer. I would like to use it to connect other devices etc.
I have a Cisco E1000 wireless N router. It is working fine. I have just completed wiping my HD and reinstalling WinXP and other software. But I also need Cisco Connect. It appears the only way to get it installed is to run the Cisco Setup program. But since the router is working fine, I don't want to mess with the setup. Is there any way to get Cisco Connect by download? Or get it off my install CD without running the setup program?
I recently bought a new router but I'm having issues with it. We have 2 Laptops in our house and 1 (windows 7) can connect to the router and get internet access but the other (windows vista) can't it says that the Cisco router is not connected to the internet but it is. I've tried everything, resetting, reprogramming, etc. I recently found that the windows 7 one had the software installed and the windows vista didn't. What I need is to get that software but I need to know which version to get. How do I know which version of the software goes with my computer?
The printer seems to recognize the wifi but won't connect, even tho I am following instructions to hold down the WPS key before clicking "OK" on the printer.
I've got a problem with my Linksys E1000 router. When I bought it, it worked without trouble. Setup was easy and straight forward and I was able to connect all my wireless devices (2 latops, a mobile) without any problem. Then, after two months or so, I noticed the laptops were losing internet connection (or not finding the wireless network on start up). Rebooting the router seemed to work the first couple of times to restore the wireless connections, but after a few more days, the wireless network either shows up and the devices are unable to connect to it OR the wireless network does not appear in the network list. However, the wired connection to my desktop PC via ethernet cable has no issues at all. My conclusion is that these wireless routers (E1000) have a defect in the radio card.
1. I set a router admin password different from WiFi password(passphrase).
2. I run my Cisco Connect app and it asks me to change my router admin password. If I don't change it - I can not use Cisco Connect app. If I provide my WiFi password then it changes my router admin password.
Maybe it was done to have a "simple" solution - 1 password for everything. But maybe its a bug because router admin password should be different from WiFi password fro security reasons.
For two years I had a 2-Wire home portal from AT&T for my DSL line. I also have DirecTV with a DVR that has an ethernet port to download video on demand from the internet. I bought a Linksys WAP54G to use as a pass-thru to the DVR and it has worked perfectly for the entire time. I remember that the setup was a nightmare, so I saved the settings in case I lost them.
when I connected the new E1000 router to a Netopia DSL modem, I decided to reconfigure the WAP to use the new router. I recovered the configuration file and the only thing that I had to change was the MAC address for the new router which I used with the Linksys' web-based setup tool. I used the network discovery and selected the new router. All of the settings including the router name, default gateway, and static address for the WAP54G were the same.But, when I go to the setup page for the DirecTV DVR and perform a network test, I get an OK connect to the local network, but an error22 and fail to connect to the Internet. Of course, going to the help page on the DVR for that error only gives the lame troubleshooting such as, is the router plugged in? Is the ethernet cable connected? etc.
I know that when I had to set it up with the original 2-wire portal, I had a lot of tweaking to do in the advanced wireless settings. I'm trying to setup using the WAP54G as a pass-thru bridge for DirecTV.
Connected my Dell laptop to the E1000 using the enclosed disk, easy install and no problems with wireless connection. Created a USB via the install disk to connect the Dell desktop (XP pro SP3). When running installing received error pop up "installation not compete" contact Linksys support for assistance. Disabled all internet connections and tried a manual installation but failed. Should I just purchase a wireless USB addapter?
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
I need to setup my Aironet 1231 to connect some remote computers to a Cisco home wifi unit wirelessly. Here is what I need:
CiscoLinksys E1000 provides my wireless Internet connection in building A ----> Cisco Airnet 1231 is in building B and cat5 cable cannot be run between the buildings. Building B can see building A's wifi signal but only on one side. I need to provide wifi Internet to the entire B building. ---> Cisco 3550 PoE switch ----> another Areonet 1231 ---> Laptops via wifi.
I just bought a E1000 and connected it to my cable modem. I can connect to the internet with my wired PC and wired Xbox 360 with no problems. For some reason on my wireless laptop I can only connect to the internet by the Guest connection. When I connect to the regular router SSID I get local only access, no internet.
We originally set up Cisco Connect with our E1000 Lynksys Router on a laptop- that has since died. So- I wanted to set up the software on our desktop and so I put in the set-up disk. I keep getting message "We didn't find your router" even though I now have the computer linked directly by ethernet cable. I do have connectivity to internet which I set up using my "Easy set-up key" and have a strong signal. Can't get past the first router step on the set-up disk to install the program- so now do not have Cisco Connect on any computer.
I have a blog and website hosted by X9 Hosting. I am unable to connect to cPanel, the website, the blog, or and X9 sites.This began when saving a WordPress article in the blog. The save hung and then all connectivity through the router was lost.When using the modem (wired) I can visit the above sites. what do I need to do to gain wireless connectivity back?
I just recently got a new wireless modem from Verizon. So far, the connection with that modem is far better. My HP Touchpad, my Sony Vaio laptop, and my custom built desktop are all connected to the network. Unfortunately, that is not the case for my HP Mini1000 notebook. It detects the network connection; but, it cannot connect saying that it is unable to verify the certificate.With all the other devices, all I had to do was put in the WEP key and they were connected to the network. But, the HP Mini does not give me that option. How do I get the notebook to connect to the net?
