Computer Cannot Obtain IP
Sep 19, 2012
In my home Ive got ADSL wifi router. Me and my brother have 2 computers ( 1 MSI , 1 DELL )There is a problem with obtaining IP addresses.When I connect to WIFI, it works with no problems ... I get IP 192.168.1.x ... But when my brother wants to join WIFI, he gets address 169....But sometimes it is working for him and somtimes not.We solve this problem with turn off and turn on wifi router. But there is still same problem, now my brother gets IP address 192.... and I get 169... so it looks like wifi can give only 1 IP but dhcp is configured for more IP ... We also have 1 desktop computer which is connected with ethernet cable and there is no problem with connection... only wireless problem.
View 1 Replies
ADVERTISEMENT
Jan 23, 2011
I have forgotten my security key in order for my new computer to connect to the internet wirelessly. What is the easiest way to find that security key?
View 1 Replies
View Related
Jan 12, 2011
I've recently reinstalled Windows 7 64 bit on a machine and it was working fantastic. I installed new parts including RAM, hard disk, disk drive, power supply. I rebooted the machine and everything was working perfectly. A few days later I booted and it no longer connects, regardless of being directly connected to the modem, the router, or using a wireless USB dongle purchased from a retail store. The NIC is set up to obtain IP's automatically but an ipconfig /renew gives an error and the built in troubleshooter just states that it can't obtain an IP.
View 2 Replies
View Related
Mar 30, 2011
This is not a problem with the computer it is a modem problem. It will not let me obtain an ip address from websites or connect to steam. It is a linksy's modem if your wondering.
View 3 Replies
View Related
Jun 19, 2011
Type: Error
EventID: 1054
Description: Windows cannot obtain the domain controller name for your computer network. The specified domain either does not exist or could not be contacted. Group Policy processing aborted.
Dad's work laptop (XP) will no longer connect to any wifi at all. I removed the Intel PRO/set wireless utility so it would default to windows, enabled the Wireless Zero Config. It will acknowledge the network, attempt to get an IP address from the network for 1 minute, then it rotates down to the next network SSID in queue (I have 3 SSID's in our house). When it reaches the end, it just goes back to the "Windows is not connected to any wireless networks" message.
View 2 Replies
View Related
Mar 12, 2012
Currently i have multiple computers that are connect via lan with ip addresses(static) that are connected to a cisco router. My question to you, how do you assign more ip addresses to computers on the lan.
View 2 Replies
View Related
Sep 9, 2011
I am having a hard time to set up my basic configuration for the internet access. I have an external ADSL-modem for my connection to my ISP and I am using PPPOE. I get the 881 to obtain an external IP (so I guess dialin parameters are ok), but I don't get any internet access (f.e. ping), nor do I recieve any packets. [code]
View 2 Replies
View Related
May 11, 2011
I coulden't visit any websites and it gave me an "error 105" something. So i tried connecting my other comp to the internet cabel with the same result. So i tried to find a solution on the web (wierless internet still worked) and stumbeld upon a similar problem were the answer was to manually fill in an adress in the "internet protocol version 4" properties in the "local area connection" properties. I then noticed that i dident have the "Obtain DNS server address" set to automatically and that the other manual boxes were empty. I then turned the auto on an i had access to internet. Is this safe? Cause i read somewere that DNS server addresess were provided by the company that provide you your internet service, and that you can be redericted to a fake website that can get a hold of your account information on it
View 1 Replies
View Related
Jul 24, 2012
how do i find my password or key for wireless router
View 1 Replies
View Related
Oct 25, 2011
How do i secure my online and obtain a password?
View 2 Replies
View Related
Oct 19, 2011
Anyway, I have an hp desktop pc, running windows 7, with high speed cable connection.. Im attempting to obtain a new ip address.. but when I go to command prompt, and type in ipconfig/release, I get an error telling me that "No operation can be performed on Local Area Connection 2 while it has its media disconnected"
View 1 Replies
View Related
Feb 7, 2011
I have a netgear wireless router, not sure on the model but can find out if required. My xbox360 is hard wired to the router and my Laptop is connected wirelessly to the router using the internal wireless connection on the laptop. The other half has a laptop too, for some reason her will not connect wirelessly, just gets stuck on a constant loop of ''aquiring ip address'' and does not get past this point. Laptop works if hard wired to the router. how do i get ip address to assign.
View 1 Replies
View Related
Aug 28, 2012
I have a Lexmark Professional X7675 that will not connect to my wireless network saying "unable to obtain IP address". This printer was previously connected to the wireless network with no issues. I did a reinstall on my computer and a reset of the printer network settings but still it will not connect to the wireless. The SSID and the WPA are both correct.
View 1 Replies
View Related
Oct 6, 2012
I have simple set-up in my network with 2 routers connected to each other, 2nd router is just kind of wireless access point and switch to extend cable sockets upstairs.I have DHCP reservation on the first router and it works perfectly. Second router has DHCP server disabled, and I have configured DHCP reservation same as the first router, but it gives random IP addressess instead of reserved. how can I configure second router to obtain MAC DHCP RESERVATION TABLE from the 1st router?
View 7 Replies
View Related
Sep 14, 2011
I cant to obtain DHCP-address on WAN interface. All over hardware can (windows-based systems and Asus RT-N10), but not Cisco 881 Also i cant to obtain ip even from Asus RT-N10 with this configuration:! version 15.1 service config no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot-end-marker ! ! ! no aaa new-model memory-size iomem 10 ip source-route ! ! ip cef no ipv6 cef ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO881-K9 sn FCZ1523C3RR ! ! username admin privilege 15 secret 5 $1$0H8v$xx/HtPJIllcFvEWFjzI5t/ ! ! ! ! ! ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface FastEthernet4 ip address dhcp ip broadcast-address 0.0.0.0 duplex auto speed auto ! interface Vlan1 ip address 192.168.4.1 255.255.255.0 ip broadcast-address 0.0.0.0 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! logging esm config ! ! ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 logging synchronous login local no modem enable line aux 0 line vty 0 4 exec-timeout 0 0 logging synchronous login local transport input all ! end After thousands experiments next configuration started to obtain ip from Asus RT-N10 , but not from ISP ! ! Last configuration change at 12:22:25 UTC Tue Sep 13 2011 by admin ! version 15.1 no service pad service timestamps debug datetime msec service timestamps log datetime msec no service password-encryption ! hostname Router ! boot-start-marker boot system flash c880data-universalk9-mz.151-3.T.bin boot-end-marker ! ! ! no aaa new-model memory-size iomem 10 ip source-route ! ! ! ip dhcp relay information trust-all ip dhcp compatibility suboption link-selection standard ! ! ip cef no ip dhcp-client broadcast-flag no ipv6 cef ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO881-K9 sn FCZ1523C3RR ! ! username admin privilege 15 secret 5 $1$3bFL$y/cxqQLd.8cixPrtETEJ4. ! ! ! ! ! ! interface FastEthernet0 ! interface FastEthernet1 ! interface FastEthernet2 ! interface FastEthernet3 ! interface FastEthernet4 ip dhcp relay information trusted ip dhcp relay information check-reply none no ip dhcp client request tftp-server-address no ip dhcp client request netbios-nameserver no ip dhcp client request vendor-specific no ip dhcp client request static-route ip address dhcp ip broadcast-address 0.0.0.0 duplex auto speed auto ! interface Vlan1 no ip address ip broadcast-address 0.0.0.0 ! ip forward-protocol nd no ip http server no ip http secure-server ! ! logging esm config ! ! ! ! ! control-plane ! ! line con 0 exec-timeout 0 0 logging synchronous login local no modem enable line aux 0 line vty 0 4 exec-timeout 0 0 logging synchronous login local transport input all ! end ISP's hardware based on Juniper.What else must I switch of/on to start DHCP-client?!
View 5 Replies
View Related
Sep 22, 2011
I just got the motorola droid 3, my first android device. I'm trying to figure out how to get my device to connect to my network as it won't obtain the IP address.I have a Motorola Surfboard SBV5120 Modem and a Microsoft MN-700 router. I just switched from the Palm Pre Plus which connected perfectly to this network, the network is unsecured and has 2 pc's and a 360 running on it. I was able to connect to my friend's wireless network fine at his house.
View 9 Replies
View Related
Sep 10, 2012
My Fujitsu Siemens AMILO XI-1554 RTL8169/8110 ethernet will not obtain IP address on any other LAN, except my home network. The adapter is set to obtain IP address automatically. I have updated the drivers using the Update Driver option on Windows 7 Ultimate 32-bit.
View 1 Replies
View Related
Jun 17, 2011
I have an Avaya IP Phone for work. This has been tested at work and works as expected. After the IP Phone boots it's able to obtain an IP address from work. At home when I plug the IP phone into my DIR-655 router, it's unable to obtain an IP address. Other network devices are able to obtain an IP address, for example any computer or laptop. Also my wireless works with no issues expect for the IP phone. I've already done some searching and found other users with the same issue but I haven't been able to find a solution other than setting a static IP address. I'm curious why this relatively new router won't work with an IP phone. I've played with some of the router settings but it didn't make a difference. Any work around to get the DHCP to work? I'm running the latest firmware for my router: 1.35A Hardware Versions: A4.
View 9 Replies
View Related
May 12, 2012
My new EA4500 (fw ver 2.0.36) won't obtain an IP from a Brighthouse TM502G cable modem. The EA4500 replaced a functioning WRT54G which would obtain an IP from the ISP. I've tried upgrading firmware and have used both straight-through and crossover cables between the EA4500 & TM502G to no avail. The EA4500 would issue IPs to it's clients, but not obtain one from it's TM502G. At the moment, all 3 are daisy-chained together with the old WRT54G in the middle in order to make the EA4500 work. Both WiFi and LAN ports function in this configuration.
View 1 Replies
View Related
Dec 23, 2011
Cisco Rv042 (obtain an ip automatically) problam ?,Firmware Version : v4.1.0.02-tm (Sep 16 2011 18:40:48)
DHCP Server Working, but Cisco Rv042 can't obtain an ip address autimatically on WAN Ports.
View 1 Replies
View Related
Apr 8, 2013
I have installed about 2 days ago one Cisco WCS 2504 and 11 APs. Everything is doing well regarding to WEP authentication. But I have a Radius Server that is alson running with some issues on wireless:
- Unless I open network settings and click connect on that config I cannot obtain a valid IP Address;
- Roaming is not working also;
View 6 Replies
View Related
Dec 20, 2011
what application/service is sending out net bios broadcasts on a network segment the requests are for machines that no longer are on the network but something is trying to obtain there ip address as they are not in dns any more i am assuming this is why they are resorting to netbios broadcasts i need to some how isolate what application or service is trying to find out.
View 9 Replies
View Related
Dec 20, 2012
Small company, under 10 computers, wired and wireless printers, straightforward network. Do not need (nor particularly want) Smart Wi-Fi, Cloud Connect, or or anything other than a simple manually-setup router. Have a new EA6500 I plan to use replacing an E1000 that is playing up (needs to be reset every morning) connecting to Verizon east (former GTE) aDSL. Connected the EA6500 to a laptop via ethernet, changed router password to same as E100, set up the two port forwards I'll need (IPs on the internal network are static in the 192.168.1.0/24 block), changed DHCP server to start at 101 (don't ask), leave Internet Connetion Type setting at "Automatic Configuration - DHCP" (same as E1000), shut down both routers and modem (Westell WireSpeed 890-210015-04). Connect EA6500 to modem, power up modem, power up router, and...Nothing. Does not receive external IP via DHCP.If I switch back to the E1000, it immediately picks up the IP lease.
View 6 Replies
View Related
Jan 23, 2011
I've had the adapter for a while now, successfully running on XP SP3 with the linksys software. I could see networks, connect to them with WPA security and get an IP address. I recently tried uninstalling the software, then connecting the adapter to install only the drivers and let windows manage it. Since then, I haven't been able to acquire an IP address. It can see the SSID and connect to it, but continually tries to acquire an IP address. I've tried this with different SSIDs at work and home...same result. I've tried uninstalling the driver from device manager, but every time I restart and connect the adapter, windows recognizes the adapter. I probably made matters worse by connecting another adapter to it, in an attempt to work around the problem. That is a USB adapter, WUSB600N. Tried the same thing, but continually tries to acquire an IP address.
View 2 Replies
View Related
Feb 6, 2011
I set up an "access control" rule in my DIR-635 and so I have all navigation log from a PC of my LAN. But the URL in log are often truncated.There's a way to obtain a full track for an user navigation?
View 3 Replies
View Related
Aug 8, 2011
I am setting up a dual WAN network in our small business office and I am confussed on the set up of the RV042.
On WAN1 I have a satellite modem connected
On WAN2 I have a cradlepoint CTR35 Router with a verizon aircard
The satellite has lag issues and will drop out during poor weather but has a 17GB dowload limit. The verizon aircard has only 5GB download limit but normally works in poor weather. Code...
Do I select obtain DNS automatically on both WAN1 and 2? Do I set this up as a gateway or a router?
View 3 Replies
View Related
Mar 7, 2012
I have configurate AP1230 as DHCP server. And I have 2 vlan and SSID :
vlan 1: office use
SSID: OFFICE
vlan 11: guest use
SSID: GUEST
Now the user can login with OFFICE's ssid for obtain IP from windows server 192.168.3.4. But GUEST's ssid can't obtain IP after login.
ip subnet-zero
ip dhcp excluded-address 10.0.0.1 10.0.0.20
ip dhcp excluded-address 10.0.0.40 10.0.0.254
[Code].....
View 9 Replies
View Related
Mar 29, 2012
I would like to share one problem with WLC 5508 . we added a new virtual interface on the WLC. One new SSID is associated with this interface.
We created a ACL for this interface to restrict the access via WIFI to certian services. It´s not correct that everything works fine because the change were not applied. [code]
The changes of the ACL are applied on the fly, but for reason we don´t know, the clients don´t get a DHCP IP-Address (after changing the ACL) until the Controller is rebooted.
View 2 Replies
View Related
Sep 2, 2012
I am studying for my CCENT and have two Cisco switches and three Cisco routers. I have 'configured' the switches and routers but how to obtain valid IP addresses to assign to my devices and how I can connect these devices to the internet via my wireless home hub.
View 3 Replies
View Related
Nov 5, 2012
I am trying to connect my WDTV Live to my desktop PC, and I connect to the net through a wireless connection to my router. Because its in the other room, I can't connect my WDTV Live to the router without running cable along the floor. Having said that, its not far away from my desktop PC, so I'm trying to connect them directly via cable. The problem is that my WD keeps telling me that it can't obtain an IP address and I don't know how to fix it or what values to put in.I've tried power cycling, manually setting an IP address (192.168.0.5), using different cables, all with no success[CODE]
View 1 Replies
View Related
Nov 9, 2012
I have recently bought a Asus Eee PC with Windows 7 starter.It will connect ok to public Wifi (i.e. at the Qantas lounge) but will not connect to my home Wifi network - Netcomm N150 Router. The two other computer at home (running full versions of Windows 7) work fine over this network.When I look at the Station list in the Router's interface the MAC address for the new laptop appears but it has no IP address. [code] Have tried the obvious things like power cycling.
View 13 Replies
View Related
Dec 12, 2012
My set up is a 2wire router that connects to the internet, with an ethernet power plug connected to it. Over the other side of the house, I have the other ethernet power plug connected, with a Netgear router in access point mode.The main router is on 192.168.1.1, and the access point is on 192.168.1.3. The DCHP server is enabled on the main router with range 192.168.64 to 192.168.1.253. The access point has the DCHP server turned off. The routers have the same APN and security (WPA2-PSK).Also, the wireless channels don't overlap, channel 1 and 11.Now to my problem:The internet always works fine for a few days when the routers are turned on. But at some point between 1 to 3 days later, every computer can't obtain an IP address while connected to the access point. But all computers can connect to the main router (i.e. when closer to the main router than the access point), and then go near the access point and it keeps the connection. If I reboot the access point, then everything works again for a few days.
View 3 Replies
View Related
Dec 14, 2012
I bought a Linksys WAP610N today, i placed it so i could get a signal where i can't normally.
The thing is i configured it correctly, well at least i think, i can see it on my wireless network, with a good signal, but on my Android tablet (Google Nexus 7), it can't get past the "Obtaining IP address".
I called the technical support, the person there tried to assist me for about 1 hour, we tried different settings, we upgraded firmware from 1.0.01 to 1.0.04, but it didn't worked. Now he said someone will call me tomorrow during the afternoon.
My router isn't Linksys, it's a Netgear, i don't have wireless problem when i connect my tablets or any other wireless device on it, it's just that i bought this WAP610N to have the signal in my bedroom, where i don't get any signal normally.
View 7 Replies
View Related
