I am studying for my CCENT and have two Cisco switches and three Cisco routers. I have 'configured' the switches and routers but how to obtain valid IP addresses to assign to my devices and how I can connect these devices to the internet via my wireless home hub.
View 3 Replies
I have recently bought a Asus Eee PC with Windows 7 starter.It will connect ok to public Wifi (i.e. at the Qantas lounge) but will not connect to my home Wifi network - Netcomm N150 Router. The two other computer at home (running full versions of Windows 7) work fine over this network.When I look at the Station list in the Router's interface the MAC address for the new laptop appears but it has no IP address. [code] Have tried the obvious things like power cycling.
View 13 Replies View RelatedI have a Belkin Play N600 HD router. Does it have the capability to let me assign fixed IP addresses to devices like printers, NAS drives, and cameras so I know where they are?
View 2 Replies View Relatedhow do i assign IP addresses to 10 computers in a network?
View 3 Replies View RelatedI have installed about 2 days ago one Cisco WCS 2504 and 11 APs. Everything is doing well regarding to WEP authentication. But I have a Radius Server that is alson running with some issues on wireless:
- Unless I open network settings and click connect on that config I cannot obtain a valid IP Address;
- Roaming is not working also;
what application/service is sending out net bios broadcasts on a network segment the requests are for machines that no longer are on the network but something is trying to obtain there ip address as they are not in dns any more i am assuming this is why they are resorting to netbios broadcasts i need to some how isolate what application or service is trying to find out.
View 9 Replies View RelatedI have a Compaq Presario 6000. The DHCP server is not getting a valid IP address. How do I troubleshoot?
View 2 Replies View RelatedIs it possible to assign a name to your private network so I dont have to type the ip address and port # each time?
View 5 Replies View Relatedfor network 192.168.7.128/26 what is the first usable host IP address in decimal? What is the last usable host IP address in decimal?
View 1 Replies View RelatedOur ISP hands us an ethernet link. ISP router has one address of (for argument sake) 1.1.1.0/30 net, - let's say they have 1.1.1.1 we have the other usable address of 1.1.1.2/30 assigned to our 3825 router. Is it possible to use hsrp or vrrp if there is not two valid/unique "wan" IPs to assign to our routers? For example, if we had a pair of 3825 routers? are we stuck with basically a manual failover or requesting our isp to provide a larger address wan block?
View 2 Replies View RelatedI imagine I can use the framed-ip-address attribute to assign ip-addresses but there seem to be support for static ip addresses only?A bit of a drag when we're talking 200+ nodes.
View 1 Replies View RelatedI have a Motorola Surfboard Modem connected to a Netgear 24-port switch. I bought the WAP4410N to provide wireless connectivity from the switch.
All my PC's can get perfect connectivity via the switch but none of my wireless devices can connect at all.
Sometimes I can get 1 PC to connect but what's strange is I can view my networked folders and such but cannot access the internet.
I've upgraded the firmware to the latest May-2012. IPv4 and IPv6 are both set to automatic.
I have a Motorola Surfboard Modem connected to a Netgear 24-port switch. I bought the WAP4410N to provide wireless connectivity from the switch. All my PC's can get perfect connectivity via the switch but none of my wireless devices can connect at all. Sometimes I can get 1 PC to connect but what's strange is I can view my networked folders and such but cannot access the internet. I've upgraded the firmware to the latest May-2012. IPv4 and IPv6 are both set to automatic.
View 1 Replies View RelatedI just thought if it's possible to make sure that only approved IP addresses for each of divisions of a company can be used.How can I assign for a port one/more public addresses and be sure that only this port is using it/them. Thing is I have only one 24 bit public Network ID provided to me by ISP. One IP address of the range is used for ISP's gateway. So I have 253 addresses to be distributed among divisions. However to avoid IP address conflicts I have to be sure that only dedicated for a division IP address/es is/are used by the division.
Router is 2821.
Switch is 2950.
I'm currently replacing my ASA 5505 with a 5510. I have a range of public IP addresses, one has been assigned to the outside interface by the setup wizard (e.g. 123.123.123.124 ) and another I would like to NAT to an internal server (e.g 192.168.0.3 > 123.123.123.125). On my asa 5505 this seemed fairly straigh forward, i.e. create an incoming access rule that allowed SMTP to 123.123.123.125 and then create a static nat to translate 192.168.0.3 to 123.123.123.125. Since I've tried to do the same on the 5510 traffic is not passing through so I'm assuming that the use of additional public IP addresses is not handled in the same way as the 5505? I also see that by default on the 5505, 2 VLANs are created, one for the inside and one for the outside, where as this is not the case on the 5510. Is the problem that VLANs or sub-interfaces need to be created first? I'm doing the config via ASDM.
Everything else seems to OK i.e. access to ASDM via 123.123.123.124, outbound PAT and the site-to-site VPN.
How do i tell my firewall to start listen also on another outside ipadress assigned by my ISP? I have it used on other firewall right now. So my steps would be shutting down ip address assignment off old firewall interface. Assign that ip address to ASA5510 outside interface and configure NAT.
View 13 Replies View RelatedThe 1130ag was the LAP model but I upgraded it to run in autonomous mode. My understanding is that it cannot assign IP addresses but I just want that confirmed. It is not connected to a WLC nor a server that can do DHCP.
View 5 Replies View RelatedMy home network currently consists of the following components...
BT Homehub 3 router - B/G/N
PC running Windows 7 and using a Edimax wireless pci adaptor - B/G/N
XBox 360 with live connection - N
Laptop with inbuilt wifi and no slots for another card except via USB - G
Various phones - G
Everything in the house is running at ~ 26-54 Mb/s at the moment and the two N devices have a very weak signal due to their distance from the router. Unfortunately, moving the router to somewhere that will benefit one device will have a detrimental effect on the other due to their locations.The router has the option to switch on 40mhz (mbit???) which, I gather, is also known as channel bonding and this should boost the range and speed of the N service but I also gather that doing this will stop all the G devices from connecting at all.I still have the Homehub 2 router that I was using before so I was wondering if there is any way I could make use of this (or anything else) to allow me to use all devices in the house at their fastest speeds.
I upgraded my SG500 switch firmware to 1.3.0.59, since there is a new functionality DHCP server v.4 well I must say I came accross the issue I cannot solve. DHCP server assign dynamic address - no hassles. troubles start with static IP hosts.I defined a couple of hosts with static address within the correct subnet. I tried with hardware address and client identifiers. no luck. my switch does not assign the IP address I assigned to the suitable mac address. to define it I use both CLI & Web.
ip dhcp pool host HP-Elliteaddress 10.10.11.7 255.255.255.0 client-identifier 01:d8:d3:85:cf:09:72client-name HP-Ellitedefault-router 10.10.11.1exit
ip dhcp pool host VAIO-Zaddress 10.10.14.108 255.255.255.0 hardware-address 54:53:ed:1c:a1:46
default-router 10.10.14.1exit
I have a PIX 515E that I want to use to as a border between my internet connection and my Cisco AIR1131AG. I have configured the PIX to have the outside interface as a dhcp client which gets its dynamic IP address from the cable modem. the AP is connected to the E1 inside interface. Now I could see the E1 interface from the arp table from the AP but I cannot ping it. From the firewall I don't see the ARP table from the firewall. and i cannot ping the AP. what is wrong with the configuration? side note, i am able to connect to the AIR1131AG from my laptop I was not able to retrieve an IP address.
FW1 - CONFIGURATION
interface Ethernet0 description uplink towards the techsavvy modem speed 100 nameif outside security-level 0 ip address dhcp setroute !interface Ethernet1 description >>> WIFI LAN ACCESS <<< nameif inside security-level 100 ip address 10.0.0.1 255.255.255.0
[Code].....
My ISP recently started offering dual stack IPv6. After changing IPv6 from manual tunnel to automatic, none of my devices get an IPv6 address from the ISP. In the troubleshooting page, IPv6 address is also empty. I tried resetting the router but had no difference. We have another router (ASUS RT-53N) and it works fine.The ISP is using PPPoE for IPv4. In RT-53N I choose "IPv6 with DHCP-PD" and Interface "PPP". There're no such options in EA2700 though.
View 9 Replies View RelatedIs it possible to assign IP addresses to remote site WIFI users from local DHCP server and forward all other traffic to 2504 WLC?
[WIFI Users] >--------<AP (DHCP server) >------ VPN ---------< WLC
I've got a sky router at home with some devices connected wireless and some on cables. I want to be able to disable some devices at night so the kids cant go online with Xbox's and PC's at night.I dont want to just turn off the router as I want to go online at night.
View 1 Replies View RelatedMy internet comes to D-link 655 wireless router from there I have wired connection, one of the connection goes to a switch from this switch I connect wired devices in my office.Another connection from D-link 655 router goes to another wireless router in my living room which is a Linksys router. My few devices and a laptop connects to this router.My problem is I am not able to see the devices connected to my Linksys router from my office devices
View 2 Replies View RelatedMy laptop with Windows 7 64-bit is not being able to connect to the home wireless network. But other devises like iPad and iPhone and Mac laptop can connect to the same wireless network. However I can connect to the network if I connect my laptop directly to the wireless router using a network cable.I have tried upgrading the firmware in my wireless router but no luck. THis laptop had no problem before connecting to the same wireless network. But since I came back from the back home couple of days back I am seeing this problem. But my laptop can still connect to my my-fi devise wireless network. I have tried running the netsock commands listed in a similar thread in this forum but no luck.netsh winsock reset catalog netsh int ipv4 reset reset.log netsh int ipv6 reset reset.log
View 5 Replies View RelatedModem - (MODulator/DEModulator) This converts your xDSL analog signals into a digital format for use on your home network. A modem can also be part of a Router/Modem combination device.This device typically sits at the very edge of your network at your ISP's demarcation point (the point from where their responsibility for equipment ends).
Router - A router serves to 'route' information from network to network. I.e. A router will route information between the network 192.168.1.0 and 172.16.1.0. Generally your home routers will come as a modem/router/wifi access point package. It will basically route packets of information that are generated on your LAN (Local Area Network) to the internet, and in turn, route packets from the Internet to your LAN devices.
Wifi access point - Obviously provides a wireless Ethernet signal so that you can connect wireless devices to your home network. Typically, the wireless access points you will see will come as a combination of router/modem/wifi point. You can buy extra wireless access points (not wifi routers) and place them strategically throughout your home to increase signal coverage.
Switch - Uses hardware addresses to 'switch' packets through the LAN. Normally a domestic router will have 3 or 4 switch ports built into it. However, switches do come as standalone devices and can be used to increase the breadth and scalability of your home network by using the extra ports they provide to patch in more devices.
Host - A host is basically your PC, iPad, smart phone, laptop that is situated on your home network.
NAS Drive - (Network Attached Storage) Contains storage space that can be used as network a share by connecting it your home network.
NIC - (networt interface card) this is the component that allows your PC/Laptop to be hard wired into your router or switch. It will have an RJ45 jack so that you may connect Category5 and onwards patch leads into it from your router or switch. This talks with your computer's main motherboard and operating system to give you network connectivity.
MBs vs Mbps - MB = Mega Bytes (this measures file size) and Mbps = Mega bits per second (this measure network throughput).
Wireless card/receiver - as above but wirelessly.
how do I MANUALLY assign ip address to devices connected to my n300
View 1 Replies View Related2 of my attached wireless devices have the same IP address different MAC address. How can I assign unique address to each of the devices
View 1 Replies View RelatedI have two WAP4410N devices on my network.When I try to connect with a wireless device (iPad, Smartphone, etc...) it does not connect.However, if I assing that device a static IP, it connects.Here is the setup:
-2 WAP4410Ns that have static IP's assigned to them. They plug into my 3560's
-Three Cisco Catylist 3560, one of which is my Default Gateway.
-Windows 2008 Server R2 (Domain Controller, DHCP, DNS)
On the System Summary screen in the Port Statistics table when you click on one of the Connected links the pop open window does not show the IP address of the connected device when using IPv4. Where can I find this?
If the devices are using static IP addresses and not getting them from the DHCP server they do not show in the Client Table under DHCP Status.
If they are know MAC addreses because they have been assigned to static IPs on the DHCP setup screen they will not show up in the Uknown MAC Addresses pop up window.
We have a Cisco 4400 controller and a mix of 1010 and 1131 access points.
We have been running out of IP's on our DHCP server because the apple devices are not releasing there IP's.
I have a cisco router 881 with advipservices running ios Version 15.2(4)M1 this router is a device that the user will connect company equipement with antivirus and such.is there a way I can force the ports like fe0 fe1 2 3 to accept only devices with specific mac addresses?if not, is there a way for me to apply an acl to vlanX to block everything that's not from these specific addresses?
View 4 Replies View RelatedI have recently purchased an SG-300-52 Managed Switch. (This is the first managed switch I have used, so I am trying to figure out what I can do with it and how it works.)
I would like to know how to find out the IP address of each computer connected to each port of the switch. Is this possible and if so how can I do this from the browser interface?
