Cisco Routers :: RV042 LAN Connected Devices IP Addresses
Mar 28, 2013
On the System Summary screen in the Port Statistics table when you click on one of the Connected links the pop open window does not show the IP address of the connected device when using IPv4. Where can I find this?
If the devices are using static IP addresses and not getting them from the DHCP server they do not show in the Client Table under DHCP Status.
If they are know MAC addreses because they have been assigned to static IPs on the DHCP setup screen they will not show up in the Uknown MAC Addresses pop up window.
In setup for old RV042 (V1), when updating / adding Mac addresses, the table is always sorted by IP addresses. But in the new oneRV042 (V3) I have, even with latest firmware 4.2.1.02 the list is random, thereby increasing the chance of user entering DUPLICATE IP addr with diff Mac addr. That will result in conflict.If the firmware sorts the DHCP entries by ip addresses, user would be able to catch duplicate ip errors even if the system does not flag the errors. All Cisco smart engineers can you all get the dhcp entries SORT by ip addresses.
I've installed RV042 for a client of mine. For next two months everything worked without any problems. The issue I've been experiencing lately is when I assign a static IP address to the PC it won't have internet access. Once I allow it to have a dynamically assigned IP then it works fine. The IP I assign isn't part of the DHCP range.
if possible with the RV042.Primary External IP address uses port forwards for some ports, all okay.I would like to have other external ip addresses assigned to machines on my lan.Basic host multiple web servers, on different IP addresses, using port 80. [code]
From what i am reading, it looks like the RV042 can do this, but I am not real clear what my rules should look like.
I would think my high priority rule for each external IP address would be to deny all traffic first for each machine on the lan.Then create one entry with source 202.x.x.2 port 80 -> 192.168.168.2 ?
How should I set my rules to do this, and what settings should I have on the Nic of the second machine?
I have a Belkin Play N600 HD router. Does it have the capability to let me assign fixed IP addresses to devices like printers, NAS drives, and cameras so I know where they are?
I keep getting an error when trying to use the Microsoft Link layer Topology discovery. It claims there the is either network delays or an incompatible router on the network.
Actual error:
"Responses from other devices on the network are delayed or there is an incompatible router on the network"
I have 2 RV042 routers, one for each of our network connections. So I am assuming this is the source of the error.
my RV042 is not able to propperly update my ddns. If you try to resolve my dyndns subnet kitus-network.dyndns.org you will get 192.168.0.2. How can I make the router update my ddns with the real public ip rather than the private ip it "sees" on the WAN interface?
I purchased the Belkin N600DB, but I can't seem to find a way to reserve IP addresses for my connected devices. I need to run a server through the router, but (naturally) it keeps changing my local IP address. I cannot find the reservation utility.
I have N600 HD Wireless dual band N Router. have successfully installed the router on wireless mode, however I have the following problem in accessing the storage devices connected to the Router.I can see the storage devices connected to the Router in the "Belkin USB Print and Storage center", but when I double click to browse the devices, it does not open up.
I have two WAP4410N devices on my network.When I try to connect with a wireless device (iPad, Smartphone, etc...) it does not connect.However, if I assing that device a static IP, it connects.Here is the setup:
-2 WAP4410Ns that have static IP's assigned to them. They plug into my 3560's -Three Cisco Catylist 3560, one of which is my Default Gateway. -Windows 2008 Server R2 (Domain Controller, DHCP, DNS)
I have a cisco router 881 with advipservices running ios Version 15.2(4)M1 this router is a device that the user will connect company equipement with antivirus and such.is there a way I can force the ports like fe0 fe1 2 3 to accept only devices with specific mac addresses?if not, is there a way for me to apply an acl to vlanX to block everything that's not from these specific addresses?
I have recently purchased an SG-300-52 Managed Switch. (This is the first managed switch I have used, so I am trying to figure out what I can do with it and how it works.)
I would like to know how to find out the IP address of each computer connected to each port of the switch. Is this possible and if so how can I do this from the browser interface?
I am studying for my CCENT and have two Cisco switches and three Cisco routers. I have 'configured' the switches and routers but how to obtain valid IP addresses to assign to my devices and how I can connect these devices to the internet via my wireless home hub.
Haveing issue with DHCP server handing out IP addresses to client connected to VLAN5 interface.ISP Router>Firewall -(WatchGuard Drop-in mode) I have several 3750 switches and one acting as a L3 switch. The L3 is configured as follow: [code]
If I connect a laptop to int fa1/0/10 I DO NOT get an IP address from the 10.100.0.8 scope. If I connect to another interface within the VLAN 1, I get an address from the 10.100.0.0 range.
1)i have problem in LMS 4.2 , he shows most devices not connected to topology sitting lonly even though the have cdp enable , how to force these to join the topology
2)why some devices are shown unreachable , even though i can ping them from lms server and gets reply, also they have community and cdp configured
I've got an RV042 router at home and am connected from my office via the QuickVPN client ver 1.4.1.1.2. I can ping the RV042 and log into the administration page and make changes. However, I can not see other computers on the remote network. I can not ping them. When I open my Network page, I still see the computers on my local network.
All machines are running Windows 7 Ultimate. ISP is Comcast at both locations. WAN IP's are dynamic, but have not changed in over a year. Local IP's on the remote (home) network are static..[url]....
I have configured 2 RV042 VPN with different ISP. Tunnel connected successfully and i can ping each other router but i can't access clients which are connected to router. I have added rules also in firewall.
My wireless router [Linksys WRT54G] has recently been dropping the connection simultaneously between two desktops. I have one desktop plugged into the router with an enthernet cord, but the other is running a wireless card. I recently got a Windows notice stating that there is an IP address conflict between my two computers. I check my IP addresses using my ipaddress.com and both computers are sharing the same IP address. I also checked the connection with my smartphone and when I am connected to the internet through my wireless; it gives me the same IP address as well. So, every device I'm using through my router is giving the same IP address at my ip address.com. I'm assuming this may be what is occasionally knocking my router offline, causing me to have to reset, but it will knock both computers offline within a few minutes of resetting.
I believe that all 3 devices should have different IP addresses when connecting to the internet, so is this a setting I need to adjust in the router, and if so where do I go, or can I try to assign one of my desktop computers a new IP address? I have no idea why my smartphone would be using the same IP address when connected through the router either. I'm going to guess that the problem is with a setting within my router.
What's happened is that after transferring my old PC's data onto my new one, and putting that one in place of my old one, therefore hooking up my modem to it, my wireless devices have been having trouble connecting to the router. Everything's hooked up fine, and it was working perfectly before, but now my devices such as my laptop and Droid Pro can SEE the router (As in connect to it and say that they are getting excellent signal strength), but when I try to open my browser, it asks as if I'm not connected to anything at all. The PC that's wired to the modem through the router works fine, however.
I have RV042 and E4200 routers . I tried the manual UPnP port forwarding using Rv042 router and was succesful ( by typing 192.168.1.1 in the explorer and logged in using user name and password )
I am using a linux embedded system whose Internal IP ,Internal port are mapped .This system is connected to one of the LAN ports
I want to try auto UPnP port forwarding both for RV042 router and Linksys E4200 routers
After enabling the Upnp option only and logging out ,Can i add a port mapping entry in this router without logging in using a C++ program which runs on linux embedded system .
I was looking for a small business router that has VPN support and dual WAN support for load balancing. Upon reading reviews, I think RV042/RV042G is a good choice. Now am thinking if it supports intervlan/ router-on-a-stick configuration?
I have a copper over ethernet connected to an adtran 908e connected to an ASA 5505 with a port 192.168.150.254 connected to the router on the Gigabitethernet 0/0
I can ping to internal and external ip addresses but when a device is connected through the wireless signal then the device cannot ping anything; what could be stopping the device from pinging any ip addresses internal and external?
I posted my current config for the router and ap:
Router: Current configuration : 2245 bytes ! ! Last configuration change at 16:03:06 UTC Tue Sep 6 2011
I'm trying to configure a 2800 series router. .I'm consoled in and put a basic config on the router (see attached). After putting this basic config on, I plugged it into a small unmanaged switch, changed my laptop's IP and plugged it in the switch also. I can't ping the router from the laptop and vice versa. This is the second switch I've tried this with, so it must be.The first switch, I installed at location, connected a cisco cable to it and a local server, so i could remote in and finish configuration. In that scenario, I had plugged the switch into a managed switch and had the same result as I'm getting now--can't ping IP addresses (can't ping the switch's IP, not can it ping local IPs).
We had a problem where a 4500 would not ping directly connected devices dispite being able to telnet to them and also view them in CDP. It was mostly forwarding packets between devices but some hosts could not connect to others.
It started happening back in around November, my sister and my computer would start freezing occasionally, slurring the audio into a robotic sound, eventually to come to.It gradually got worse, and I assumed it was a graphics card problem since it would freeze ONLY SOMETIMES and say that the graphics driver stopped working and has recovered. It usually didn't say that, though.Lately though, I noticed that when it would freeze sometimes the internet would go out for some connected devices, such as the Xbox 360. The only computer that was NEVER affected by this is the one connected directly by Ethernet to the Netgear router, (every other device is WiFi.)
Sometimes even, my sister and mine would freeze simultaneously. It was a sort of rare occurrence, though.I very lately started to notice that it would freeze when trying to load internet components with larger amounts of data, such as server console logs, Flash videos, and Soundcloud players. What threw me off is that it would sometimes freeze in programs like FL Studio or Windows Media Player... It's possible I guess that the programs were unrelated and what caused the freeze is SOMETHING sending/receiving corrupt packets.
I have a wireless G router and all of my devices that connect to it right now all have wireless adapters. I have several devices in a media closet (about 3 or 4 - Blu ray, DVR, ect) that only have wired ports. Since all these devices are right next to each other, I don't need to buy a wireless adapter for each one because that's just pointless. is there a way to have all 4 of these wired devices connect to a central device, which in turn this device connects to my wireless network? I know there is a way I just haven't been able to figure it out.And then, with this new device, is there some special way it has to be configured?
I have a HTC wildfire S phone and a Motorola Xoom tablet which connects to my wireless network and both work fine. The only problem is that my Windows 7 p.c. can't "see" them. This means that I have to connect them via a USB lead in order to transfer files. When I try the NETWORKADD WIRELESS DEVICE option the computer does a search but doesn't find anything.
I'm using MAC address filtering on my network, and have no problem adding new devices as and when we purchase them. However, a lot of these items such as smart phones with wi-fi, Kindles etc don't seem to have a name that identifies them on the device info page. All of our laptops and desktops are identified, but none of the phones etc. Is it possible to assign names to MAC addresses at all?
I just moved into a new place and the cable company supplied me with a Motorola sbg6580 gateway and I have a netgear wnr3500l router with dd-wrt. because of location I have computers plugged into both devices (htpc and game consoles in the gateway, desktops in the netgear). how would i configure the gateway and router so everything sits on a single network AND the netgear with dd-wrt handling all the heavy lifting (port forwarding mostly)
I've used Netgear & other routers for years; I was able to see the devices connected over ethernet & wifi through the router configuration utility. Cisco's interface looks poor; there is no way to see the connected devices.Many of the devices I have have a 5 Ghz radio and some don't so i need to see at what speeds they are connecting at.Or does Cisco not provide this utility? I am surprised that a high-end product from Cisco does not have this function.
