I received Apple TV and a Kobo E-Reader over the holidays, and when I try to connect them to my wireless network, they fail in connecting; even with entering the correct password. Is there something that I need to do in terms of updating, being it should connect having the correct password.
View 1 RepliesI am trying to connect to a D-Link DIR655 using a Apple G4 PowerBook equipped with an Apple Original Airport Card (802.11b) to detect WIFi signals. Trying to connect to an unsecured signal at a local Library, the computer states that there is an error connecting to the network. The Library IT checked the settings on the router and it strates the 802.11b is enabled, still there is no connection. Is there a complatibility issue witth the Orinal Airport card and the D-Link Router?
View 5 Replies View RelatedI had trouble with my roku connecting but by going to wpa2 I believe. I tried the same exact password I use to sign in with Netflix and it never connects....changed the ereader to wpa2 there to. I don't know if the firewall changes here all causing the problem.
View 5 Replies View RelatedI am having issues figuring out how i can make AppleTV,Airprint, Airplay, etc show up on Ipads that are connected to the wireless network. The controller is at a main site which is seperated by 2800 series routers at the remote sites over 100Mbs links. Ipads connect and tunnell back to the main site. I've tried enabling FlexConnect but the devices still get the main site's addressing so i'm guessing they are still tunneling unless the AP loses connectivity to the controller. I have two SSIDs (staff and students). I have tested with just setting the staff to FlexConnect. Do I need to set both SSIDs to FlexConnect to make them dump data locally? AppleTVs are connected wired to the local networks and get addressing associated with that building.
View 8 Replies View RelatedI can't get my Nook reader to connect. It is not a password issue. I entered all the info and the NOOK recognizes the DIR-601 connection, but it won't stay connected. There is a lock symbol showing and states that the dlink is "remembered, secured with WPA/WPA2 PSK" but when I try to connect it makes the attempt and then disconnects immediately. I have spent a couple of hours in the support section of the dlink site and can't figure this out
View 1 Replies View RelatedI've got an Apple TV 2, and I currently connect it (wired, that standard being the future of wireless) to one of two routers:
1) my normal router (for UK Netflix);
2) my DD-WRT router with my VPN details (for US Netflix).
Currently, I switch between the two manually, by unplugging one cable and plugging in another. This is fine, but what I'd really like is a way to do this without constantly having to kneel down on the floor and fiddle with the increasingly Medusan tangle of cables I have somehow amassed (they breed, you know).As such, my question is: is there a cable/device that can do this for me? I envisage some sort of box with a hard switch that I could flick to change the connection from one router to another. I have scoured the Internet, but don't seem to be able to find one.
I am trying to connect my laptop running windows 7 to an airport express so I can stream music to my hi-fi.I've tried a number of different things, none of which have been successful.I've tried resetting the device before each attempt to connect it and I've also ensured that the driver for my computer's Wi-Fi (Intel (R) Wi-Fi link 5100 AGN) and the firmware for my router (Linksys E2000) are up to date. The apple airport utility program is also up to date. I also saw this webpage:Sharing my Win 7 PC with Apple Airport Extreme and wireless network. - Microsoft Answers And, all these settings were correct already.I also took the device back to the shop where it was tested and found to be working correctly.
Just plugging in my airport express - Opening the airport utility program, my airport express is recognized straight away. It is highlighted in the left-hand pane and I click on continue. I then get a message asking if I want to switch networks and it says that this is required in order to set it up. I click OK to continue. After a window appears saying that it is detecting apple wireless devices, I get error message number 4 saying that an error occurred while trying to access the network. It then asks me to check to make sure my network is valid.Using ‘configure other under the file tab - The airport express is still recognized in the left-hand pane but I click on configure other. A window appears asking for the I.P. address and a password. I enter the default I.P. address (10.0.1.1) and the default password (public) for the airport express. I then get error 6753 (an error occurred while trying to access the apple wireless device. Make sure your network connection is valid and try again)however, my computer still recognizes the airport express in the list of available wireless networks. I therefore click on it and connect to it. I then try to enter the details (under configure other again). I then get through to the configure apple wireless device screen in which I can input the details of my network details, etc. I enter the details and make sure that they match my routers settings (I have even tried this with no security settings on my router). I then click on update. The computer automatically reverts back to my network and it seems like everything is working. The green light even appears on my airport express. However, I then get a message stating: Airport utility was unable to find your wireless Airport device after restarting.Switching off the wireless network and connecting the Airport express to the computer with an Ethernet cable - The device is also recognized here and I can enter all the details. Before updating I turn on my wireless network so it can make a connection. The green light shows on the airport express but i again get the message that: Airport utility was unable to find your wireless Airport device after restarting.
I have netgear router WNR 1000 v2. I'm not able to connect to Apple ipod. The password is not been accepted.
View 2 Replies View Relatedi have issue for Remote App to connect to the Apple TV using the Wireless network setup in my 180W.My wired Mac is able to connect to wireless connected Apple TV but my i phone (4, 4S and i Pad) are not able to connect to apple TV.
Do I have to enable some setting for this to work. It used to work in my very old Buffalo router with tomato firmware.
If I connect the Apple TV to wired network it works fine. Instantly it shows up in i Phone Remote app, but not if its on wireless network.
A customer of ours has the following access points and wireless lan controllers on site. They want to use the Apple Bonjour service with Apple TV's and iPads. I have enabled multicast feature of the 5508 globally and one the SSID.The Apple TV has an ethernet connection and the iPads connect over the wifi. The Apple tv is on the same subnet as the iPad's - the Bonjour features do work for approx 5/10 minutes then it stops working for some reason. The Access Points plug into a Cisco 2960 Layer 2 switch, the 5508 controllers plug are in LAG mode and plug into a Nortel Layer 3 stack which I have enabled IGMP snooping.I've read that the Apple Bonjour service isnt designed to work on a multi subnet network - but both the Apple TV and iPad are connected on the same subnet. Sounds like some kind of timeout but not too sure.
View 5 Replies View Relatedhow to setup the wireless interface to forward multicast packets? Basically I cant get the ipads etc.. to see the AppleTV to control it. I connected an AP and it works fine so its got to be something with the way the router handles the packets from teh integrated wireless interface. I've been searching the forum for about 1hr and haven't founf anything other than a breif mention of broadcast forwarding and multicast setup.
View 1 Replies View RelatedI had a Linksys BEFSR41 router with AppleTV 1stGen with 0 problems.Now I have a DIR-655 Vb1 2.00NA firmware and itunes now cannot find the AppleTV as a device. I have tried resetting the AppleTV to factory defaults re-installing latest firmware and reinstalling itunes, powering down all devices etc., and no way can itunes find the appleTV although the appleTV is on the net and seen by the router.I have gone to a wired connection to the router too because the router kept dropping the wireless connection to the router too. Of course I got the DIR-655 for wireless
View 15 Replies View RelatedI've purchased and am trying to use a Dir-655 rev. B, running firmware 2.00NA. I have two hard-drive style Apple Tv's. They can see my wireless network, and after putting in the passcode, can connect. They at this point are visible to iTunes and can play any/all of my content. However after a period of non-use, they go into standby mode, and upon waking, can no longer connect to my network. I have to re-do the wireless each and every time
View 5 Replies View RelatedI have a iMac with 2 AppleTVs all connected to a D-Link DIR-655. I used to run iTunes on Windows 7 and everything worked fine (before I got the iMac). Here's the problem - since moving over to the Mac, when the AppleTVs are wire connected to the network, the iTunes library on the iMac will not show up in the AppleTVs. The AppleTVs work fine otherwise (they can both connect to the Internet with no problem). I also cannot see the iMac's iTunes library or the AppleTVs in the iPad's remote app. When I then disconnect the ethernet wire from the AppleTVs (so they hook up wirelessly to the DIR-655), it works fine (iTunes library on the AppleTVs, and everything is showing up in the iPad remote application). After the wireless connection is established, if I plug the ethernet wire back into the AppleTVs (to take them off wireless and force them back onto the network wired), it works fine as well, until I reboot the iMac, then back to square one with the same problem.
As mentioned, it works fine with the Windows 7 PC, but if the iMac is turned on on the same network router, same problem with the Windows 7 PC (library will not show up in the AppleTVs). As soon as I turn off the iMac, the Windows 7 iTunes libraries show up in the AppleTVs (no need to wirelessly connect). There's clearly some conflict being created with the iMac with the DIR-655 that's causing this. I've tried enabling Multicasting and port forwarding TCP 3689, and this didn't fix it either.
I have a brand new DIR-655 Rev B, Firmware 2.0NA.I just realized that none of my Apple device can discover each other using Bonjour, which is very essential for local connectivity for gaming and remote control and iTunes music streaming.
View 11 Replies View Relatedrecently purchased the Wireless N D-Link Router DIR-615. After a few hiccups the router works with all of our computers, blackberry's, wireless printer and Ipod touch's however my Apple TV 1G will not connect to the network. The Apple TV will just give the error code -6 after the password for the network has been entered. I double checked that the password for the router is only WEP 10 hex digits and that it is correct have tried reseting the Apple TV to the factory settings and using the DHCP Reservation in the network settings of the router and manually configuring the TC/IP settings on the Apple TV (Not quite sure what I am doing with this though so put everything back). I have also tried switching the 802.11
View 4 Replies View RelatedI recently purchased the dir-655 router, and am impressed by it's speed. I had no problems configuring the router to my liking, and have found that all of my wireless devices communicate with it flawlessly.
However, my main reason for purchasing this router was for the USB port. I had hoped to connect my 2TB external drive and have it accessible by all wireless devices in my home. To my understanding, the USB port relies on the use of the Shareport Utility. I've installed the Shareport Utility to my laptop for wireless access to my media files for streaming.
Here's my problem. How can I access my media on my external HDD connected to the dir-655 with Apple TV2? I've read several options for PS3 users... and they all seem to involve leaving the pc/laptop running. I would ultimately like to bypass the necessity of leaving my laptop on... but if that's not a possibility, I can live with it being left on.
Therefore, is it possible to access the external drive connected to the dir-655 with my Apple TV 2 by using the laptop as a bridge? Can I access the content via Apple TV by using Windows SMB just as I currently do to access media stored on my laptop?
To summarize, I want to have access to the media on my external drive connected to the dir-655 via Apple TV2.
About six months ago I replaced my old router (some generic 802.11b/g router I got for free with a rebate years ago and which lasted a few years) with a Dir-601 after the old router started intermittently cutting out. Setup of the Dir-601 was straightforward enough and I have WEP enabled. Both my Macbook and my wife's Macbook can connect fine if we choose the router from the drop-down wireless network list, and the router has been consistently reliable in maintaining a connection as long as the OS is running.
HOWEVER, neither computer will remember the wi-fi network and won't auto-connect when waking up from sleep or after a restart. Our iPhone and Android smartphones remember the network just fine and auto-connect every time, zero issues. I've gone through all the typical Mac troubleshooting steps, deleting saved network connections and re-establishing new ones. Never solves the problem. We always have to go to the wireless network menu and manually select the wifi connection to connect to.
It's not the Macbooks. Firstly, both macbooks have the same issue, and they're each running different MacOS versions, so there's no version-specific issue that can be at play here. Secondly, neither macbook had this issue with any previous wifi router. Thirdly, anywhere else we take our macbooks where we've set up a wifi connection, they remember it and auto-connect without us having to manually select the network. The only network where we have to manually select the network every time is the one set up with the Dir-601. In fact, we're at my inlaws for the holidays and our Macbooks have been auto-connecting to their router each and every time.Is there a setting I'm not seeing on the Dir-601 admin page?
I am stuck in an area that has severly restricted access. I would really like to continue to use my news reader services. However, the guy who set up the nearside router has torrent ports blocked, news group ports blocked, etc.So that people can't bog down the network with downloads.
View 1 Replies View Relatedhave a Dell Inspiron 1525 and when I revived it from years of neglect I have come across a problem that I cannot connect to a wifi connection.I know that in order for the wifi to be found the wireless in my laptop has to be turned on, however the light on the side does not switch on.So far I have installed drivers and even bought a new wireless WLAN card...And still it does not work.The laptop runs fine with wired connection but I want to use wireless?
View 3 Replies View RelatedI cannot get my JE200 reader to connect. I keep getting an error message stating "No networks available". I have been able to connect my e-reader to other wireless networks so I know it works.
View 3 Replies View RelatedIs there a way to load a spare compact flash with a running-config, ASA IOS, & ASDM software via card reader? I need to load another flash card with all of the settings necessary for normal operation. This "spare" card will replace the flash that is currently in use. The reason for the replacement is capacity and because of changes made to the running-config. The "in-use" card is 256MB, the "spare" one is 512MB. Also, the new card will have a few changes made to the running-config, so it will, in essence, be a reload.
I have a card reader for the compact flash cards. If there is a way to load up this new card using the card reader, without monkeying with the firewall, I would prefer that. Like I said in the previous paragraph, this new flash card will replace the other one, once it's ready.
Hardware: ASA 5510
CF: 256MB (wanting to upgrade to the new 512MB card)
ASA IOS: 8.4
I recently discovered the SIM card slot under the battery in my Latitude D630.I placed the SIM card in the slot but nothing happened.
The broadcom utility indicates that there is no device detected.How do I activate this device?does it need a specific driver?
getting the 825 that the NAS device is plugged in?When I connect the NAS 323 it is not recognized and Easy search utility that comes with the 323 cannot find it. Lights on the router for that port do not light up either. Worked fine with my old linksys.
View 4 Replies View RelatedMy D-Link DAP-1522 wireless bridge is connected through a single cat5 cable from the LAN port on my PC to the 1st LAN port on the D-link unit. At the moment, it is in bridge mode, with the blue power indicator on, the orange wireless connection light flashing, and the 1st LAN port connection periodically wavering indicating that it is communicating with my PC. When I attempt to configure the DAP-1522 via my internet browser, (IP 192.168.0.50) I get an error saying that the requested webpage does not exist.
View 6 Replies View Related I've been testing it out at home where I use another D-Link with no problem. What I'm seeing is that I can connect to the router (wired or wireless) but no internet connection is reported. I believe I have also tried pinging a web site by IP address alone with no luck.
ISP: Version DSL
Router: DIR-615,
Hardware version B2
Firmware version: 2.20
I've tried turning modem and router off, waiting a few minutes, then turning on modem and letting it connect then turning on the router. That doesn't work. As best I can tell the two routers have the same settings. The ISP is using Dynamic IP (DHCP) connection.
I upgraded the firmware everything was fine. This may not be realted to the firmware. I can now connect to the Router but cannot get any Internet or data to transmit wireless. Plug in directly it works fine.
View 14 Replies View Relatedearlier today my modem died so I looked around and found an old modem (D-Link DSL-300T) lying around so I decided to use that one instead of purchasing a new one. It always worked great in the past, but when I tried it today I can only find a connection on this computer (garbage computer), the other 2 computers in my network can't connect to the internet, they can't even connect to the network at all. Oh and the router I'm using is a D-Link DIR-100. This computer is running windows XP, so is another one in the network and the one I want the connection to work on is running windows 7.
View 1 Replies View RelatedI am trying to get neighbour wireless router working. He has a D-Link DIR-615 Wireless N 300 Router. I have gotten the router working by manually putting in his PPPoE settings. Now with a wired XP SP3 computer connected via Ethernet, it can access the internet. We then configured his router for WPA2 with AES encryption. We were able to connect up his phone which can handle a WiFi connection. He was able to surf the web using the WPA2 passphrase. So far, so good. The last bit was the upstairs computer which has a PCI D-Link wireless N card in it. That computer runs XP SP2 and we have not been able to get it to connect to the internet.We have tried both Windows networking, and the D-Link Wireless management software. We were unable to get WPA2 working, so we tried WPA, WEP, and finally no security. In each case, we can get the computer to connect to the router by putting in the passphrase (except when no security), and the status changes to Connected. But then browsers are not able to open any internet site.
I have checked the ipconfig settings, they seem to be correct. DHCP is providing the computer with a valid local IP (192.168.0.102), and the gateway is correctly listing the D-Link router.Subnet mask is 255.255.255.0. The downstairs Ethernet connected computer has an IP of 192.168.0.100, so they are on the same subnet.We have tried turning "Windows Wireless Zero Configuration" service off, and also tried with it on.We have switched between using the D-Link client and allowing Windows to manage wireless settings. It finds the wireless network, and connects with the passphrase with a good strong signal, but internet persists in not working.I do not have MAC Filtering turned on.I have turned off the Windows Firewall on the wireless computer. What else am I missing?
how do you connect the router.
View 1 Replies View RelatedI cannot connect my DIR-655 to the Samsung HDTV with apps so I can watch streaming video with Netflix. The router is 60 feet away from the tv but the DIR 655 is advertised as being for a large home. What can I do to extend the signal or better it? I have even tried using my DLink DWL-G710 but have no better results.
View 1 Replies View RelatedThe problem that I'm having is basically that my router isn't giving right ip addresses to my devices. I've tried to connect a wireless printer (HP for doubts) and the router gave a 169.254.XXX.XXX ip address to it. If I unplug/plug the router, the problem is solved. It can also be fixed by using the "reboot device" tool that the router has at the configuration page. But this only works for some hours, so it isn't
Now, it isn't a printer problem. It has also happened with some notebooks, with around 5 to 6, not all of them. I've tried changing channels, resetting the router, changing password, security password type, changing firmware (present is 3.11NA H/W C2), and nothing can fix it.
My computer is almost always on. My modem and router are always on.Last night I was using the internet, no problems.This morning I woke up to find "No Internet Access".My computer was connecting to the router just fine, but the router was showing a orange Earth symbol on the front (not green).I connected the computer directly to the modem and internet works just fine. After powering off both the modem and router and checking all the connections ... still the router is not "reading" the internet from the modem. And still the internet is there if I connect the modem directly to the computer (that's how I am online and posting this right now).
View 1 Replies View Related