I am stuck in an area that has severly restricted access. I would really like to continue to use my news reader services. However, the guy who set up the nearside router has torrent ports blocked, news group ports blocked, etc.So that people can't bog down the network with downloads.
View 1 RepliesOn my home network I have two computers:
PC#1 - my main computer
PC#2 - my laptop
Each of these has Windows 7, Avast! Anti-VirusToday I was working on a website on PC#1. When I attempted to upload the files via FTP, the connection failed repeatedly. When I went onto PC#2 it worked first time.I also tried to launch World of Warcraft on PC#1, this failed. It worked first time on PC#2.Websites work fine, so port 80 appears to be okay.I have reset my router to factory settings. ipconfig /release /renear /flushdns all made no difference.
I have seen several cases where ISP's block traffic on both UDP and TCP ports 135-139 even in core firewalls. Port 135 should be Microsoft EPMAP service and ports 136-139 should be NetBIOS services. However, why do ISP's sometimes block traffic on those ports?
View 4 Replies View RelatedI am currently using OpenVPN with Your Freedom to bypass my school firewall to access the internet (ports for gaming are blocked)
I read the other day that I can connect to my home internet from here and have my computer behind this firewall just use my home internet connection.
As we are unable to control downloads and P2P use in our network, we are thinking to block all ports except 80 and 443 in our router so that they can only browse and use them only for office use. They should also be able to use messengers like skype, YM, MSN and also download any attachments in email.I wonder if we implement this, will it going to work or will there be any problem in accessing normal websites too? I know to control downloads there are many premium hardware and software firewalls out there but we don't want to invest any thing for now.I also know PTP clients can still use 80 and 443 ports to connect but it will need user to change manually port so it's fine with us.
View 1 Replies View RelatedI've been trying to open ports 5800 and 5900 for UltraVNC and checking them with online port checkers, but they are always listed as closed. I've even tried taking town windows firewall, my router firewall (although as soon as I disable and apply, it automatically switches back to enabled again), and also DMZ'ing my router. I wonder if it might have something to do with my new modem, but in the config page for that, the advanced settings are locked out. the modem is an arris TM722G, and the router is a linksys wrt-54G with DDWRT firmware.
I'm running windows 7 x64 and using a static local IP, I want to be able to use DynDNS to connect to UltraVNC.
I have been trying to get port forwarding to work for a week now with no luck. I use Centurylink for Adsl, modem is a zyxel 660r, router wrt54g, running windows 7.I have made my modem a bridge only. I have set my computer to a static ip. I have followed all the instructions for port forwarding on linksys. Still my ports show blocked no matter what check I use on the Internet.
View 3 Replies View RelatedSo I have a docsis 3 modem and I have been running PERFECTLY before i decided to upgrade my 655's fw. silly me right? well i cant tell you what i was running previously but i downloaded the latest from d-links site and now ever since my newgroups downloads speeds have dropped from 3-7MB/s to a steady 400-600kb/s.
I have tried everything using different ports and server ip for newsgroup. I have DMZed my ip i have switch wan ports. QOS off. all traffic shaping off. what kills me is that sometimes through the router itll give me my usual regular amazing speed but most of the time NOT. As soon as i remove the router out of the equation i get my speeds no question asked ( yes direct connect to router not wireless).
I can't get my Nook reader to connect. It is not a password issue. I entered all the info and the NOOK recognizes the DIR-601 connection, but it won't stay connected. There is a lock symbol showing and states that the dlink is "remembered, secured with WPA/WPA2 PSK" but when I try to connect it makes the attempt and then disconnects immediately. I have spent a couple of hours in the support section of the dlink site and can't figure this out
View 1 Replies View RelatedI received Apple TV and a Kobo E-Reader over the holidays, and when I try to connect them to my wireless network, they fail in connecting; even with entering the correct password. Is there something that I need to do in terms of updating, being it should connect having the correct password.
View 1 Replies View Relatedhave a Dell Inspiron 1525 and when I revived it from years of neglect I have come across a problem that I cannot connect to a wifi connection.I know that in order for the wifi to be found the wireless in my laptop has to be turned on, however the light on the side does not switch on.So far I have installed drivers and even bought a new wireless WLAN card...And still it does not work.The laptop runs fine with wired connection but I want to use wireless?
View 3 Replies View RelatedI cannot get my JE200 reader to connect. I keep getting an error message stating "No networks available". I have been able to connect my e-reader to other wireless networks so I know it works.
View 3 Replies View RelatedIs there a way to load a spare compact flash with a running-config, ASA IOS, & ASDM software via card reader? I need to load another flash card with all of the settings necessary for normal operation. This "spare" card will replace the flash that is currently in use. The reason for the replacement is capacity and because of changes made to the running-config. The "in-use" card is 256MB, the "spare" one is 512MB. Also, the new card will have a few changes made to the running-config, so it will, in essence, be a reload.
I have a card reader for the compact flash cards. If there is a way to load up this new card using the card reader, without monkeying with the firewall, I would prefer that. Like I said in the previous paragraph, this new flash card will replace the other one, once it's ready.
Hardware: ASA 5510
CF: 256MB (wanting to upgrade to the new 512MB card)
ASA IOS: 8.4
I recently discovered the SIM card slot under the battery in my Latitude D630.I placed the SIM card in the slot but nothing happened.
The broadcom utility indicates that there is no device detected.How do I activate this device?does it need a specific driver?
We have an ASA 5505. 5505 comes with two default vlans 1&2 with each of them marked as inside & outside respectively.My query is , if i do not want to use vlans on 5505 and only want to use the Ethernet ports as pure physical layer 3 ports, is it possible?i.e. i want to assign a layer 3 ip address on eth0/0 and eth0/1 and make them as the inside & outside interfaces rather than vlans. is it possible to do away with vlans in 5505 & will it work otherwise?
View 3 Replies View RelatedIs there a way to associate spare firewall ports with another port that is being used..For example...int gi 0/2 is being used currently for my web dmz. Its ip is 192.168.10.1..Is there a way for me to associate gi 0/3 with the same layer 2 as gi 0/2 ?
In my webdmz I use 2 ACE 4710 proxys in FT mode. I used a layer 2 switch to connect firewall and proxys together.
I would like to eliminate this switch if possible..and connect both 4710's (layer 2) direct to firewall.If I could make gi0/2 - 4 part of the same vlan, then I would be good to go.
How many of the 881 switch interface ports can be used as router ports, have used the 877 etc where i can use 2 but need a low cost router that supports 3 for routing. (needs to be physical ports)
View 2 Replies View RelatedOne of techs accidentally connected two access ports from different switches together. Since then, LMS is alerting them as being Link ports down. I tried to default the config and set them to access ports without any success. what I should do in LMS to recognize them as access ports?
View 2 Replies View RelatedI can get to anywhere I want on the web except one IP, and I can't ping it either. What can cause this? (Security off)...
View 6 Replies View RelatedIt's a newsgroup site that I subscribed to. So far, this is the only website I know of that they blocked.
View 5 Replies View RelatedMy Company Website IP Gets blocked on my Internet Connection and i have to disconnect and Reconnect to the ISP to solve the problem, all other sites work fine only my website address gets blocked, we use emails of our company site and this may be the reason, but i cant fix the issue
View 4 Replies View Relatedsetup a web server at home but just found out yesterday that my ISP is blocking port 80 on my network and they won't open it unless i upgrade my internet service... which i am not sure if there is any other way get this solved. If I port forward my site at my web server to (let say) 85, when someone type [URL] (with 80 by default), will it be somewhat in the cloud or some server to NAT 80 to 85 at my site? In short, can one type [URL] instead of [URL] ?
View 1 Replies View RelatedMy internet provider have blocked a website. I know there is a way to bypass the block and go to the website, without using websites such as Hide My ***! Free Proxy and Privacy Tools - Surf The Web Anonymously.
View 1 Replies View RelatedFor some time, I cannot access some websites. It gives me a 401 the web site is blocked by the administrator. I use a d-link router and my brother is the administrator. He told me he hasn't blocked anything. We tried to reset the router but it still gives me the 401 problem.I think it isn't a router problem. I have tried using my laptop and tried to access some sites. It still gives me the error so i dont think it's a computer related problem. I have tried to ping it. It still doesn't work. I have also tried to erase all the cookies and cache. The problem is still there. How can I fix this? My operating system is Windows XP Professional version 2002 service pack 2.
View 5 Replies View RelatedFor several days, I have not been able to access any Wordpress.com websites and my blog is located on Wordpress. I can access every other website on the internet. I live in Nicaragua and my ISP is Intel. Everyone else can access my blog, however I am blocked from all wordpress.com sites. I can access my blog through a free proxy service, so I know my blog has been blocked. If I change my IP by paying for a proxy service?
View 3 Replies View RelatedI have a brother who frequently blocks my internet access, and he does it while maintaining his own connection so he's not unplugging the router or anything. He also blocks it from his own computer, meaning he doesn't take out my wireless card or anything like that. I was wondering how to counter this and get my internet back whenever he blocks it, or prevent it.
View 1 Replies View Relatedjust tried to log onto my hotmail account and it come up with a notice that its blocked. did all that hotmail said but it still won't recover
View 1 Replies View Relatedmalcious url blocked messages while using a enternet browsing.
View 2 Replies View RelatedI have a home server running CentOS 5 and is accessible over SSH (port 22).When I am at work I am behind a firewall that blocks all ports except the ones needed. So port 22 is blocked to the outside world.Is there a way for me to get an SSH connection to my server? (ie: SSH tunneling or so?)by the way, websites with advanced web based SSH javascript(s) such as serFISH are blocked as well.
View 7 Replies View Relatedhow can i unblocked my port 9339
View 3 Replies View Relatedi've had my netgear wireless router for about a year now.i went to facebook and i recieved a message on a red and black screen t hat said this site has been blocked by netgear fire wall. i've never changed any of my setting since i got this router so i'm not sure why all of a sudden certain sites have been blocked.. i've tried logging into my account to try to change my settings using my default username and password but it keeps saying that i dont have access.
View 5 Replies View RelatedIn my office there is n computing using a Digisol router, and a Broadband connection(BSNL) whose modem is of ZTE. My boss has blocked the internet service to those systems and the error message is "Local Area Network doesn't have a valid IP configuration". how to unblock it as a system parallel to it which is independent from N computing is having internet connection.....
View 2 Replies View RelatedTest a destination port if it blocked or not by my ISP
View 8 Replies View Related