D-Link DIR-615 :: Ports Are Opened But MySQL / Apache2 And SSH Inaccessible
Feb 3, 2013
Basically, I have a LAMP server for a small landing page for myself.It was all working fine until I got my new router.Now, I can only access my sites on a LAN.All the ports (3306, 80, 22) are opened and multiple port checkers online says so.I followed some of the basic steps mentioned in this forum such as firewall settings such as:
"Port and Address Restriced"
disabled QoS
Enabled Multicast Stream
enabled DNS Relay
set DHCP range to avoid any IP conflicts
Ive even temporarily removed all firewalls completely to make sure that is not the problem.
I have a customer who is going to host a VOICE services like providing SIP services to its customers. What specific ports required to be opened up for this on ASA 5515X. I would rate it ASAP.
Have had an issue with a previous Belkin router and having similar issues with current DIR 825. Internet is dropped when opening up the Mac Book (Using N or G). Sometimes the internet connection still works with i Pad and iPhone, sometimes it doesn't. As well, sometimes I can turn WiFi off on the Mac Book and then turn it back on, and it will work for about the time it takes to load one webpage and then it will cut out again.
Every time this happens I can unplug the power from the router and plug it back in which has fixed the issue in every case. HW ver is B1 FW ver is 2.05 ISP is Cable Modem is standalone.
Up to this point, all the computers on the network accessed the e-mail server via the Windows name of the PC running the e-mail server. However, one of the PCs will need to access e-mail from the WAN soon as opposed to the LAN, so I switched the server name in Thunderbird (e-mail client) to the actually fully qualified domain name of the server (registered at NO-IP, which redirects to the e-mail server at home).
The problem I am running into is that all the requests sent for IMAP or SMTP are being blocked by the router. That's even though I added port forwarding rules for them. The logs show messages similar to the following:
"Blocked incoming TCP connection request from 216.168.101.68:51291 to 216.168.101.68:143"
It doesn't make a difference if I change the endpoint filtering to "Endpoint Independent" either. Any thoughts of what else I can try? DMZ is not an option.
I've got the DIR-825 2.02. I had an issue where if you did change the IP adress default 192.168.0.xxx to something like 192.168.yyy.xxx, the configuration page was becoming inaccessible. It was super slow, was displaying the wrong pages with missing images and wrong page formating. I had to reset the router to default and then it was working fine.That seems to have been fixed since 2.05. Now you can change the default ip adress to anything you want and the configuration or setup still work fine.When I am on LAN, the setup page are displayed almost instantly. By remote, it's super slow.
Region : UnitedKingdom Model : TL-WR841N Hardware Version : V7 Firmware Version : 3.13.9 Build 120201 Rel.54965n ISP : Linpop
I have had my WR841N for about a year, supplied to me by my WISP. I like the router in terms of facilities but it seems to have one really annoying problem.
The router becomes inaccessible via the webpage after a random period of several days. I have at times associated the issue with occasional loss of radio broadband service but it is not always so. To try and further localise the problem I set the router up to send emails of the log to me every two hours from 17/04/2013 but today for the second time the emails stopped arriving after the 02:29 message and the router is inaccessible again. The router previously locked up with loss of broadband service on 26/04/2013 sometime after emailing a log at 02:41 on that day but had been running without issue from a cold restart at 12:25 as soon as I noticed loss of service. Today I have not lost broadband service and so even though I am no longer receiving an emailed log or able to access the router via its webpage I am leaving well alone for the present. Some months ago when I originally noticed the web access issue I downloaded and installed the latest firmware TL-WR841N-v7-120201 and I note that there have been no further firmware releases for the v7 model.
My broadband service is delivered via radio link from a local transmitter mast and is reliable with typical download speed of 20-30Mbps and 30-40Mbps upload, seldom if ever affected by weather so I now feel the problem is inherent in the router rather then being the result of some issue affecting broadband service which has been solid since 26/04/2013
Without the log I have no way of knowing what was happening when the router became inaccessible but I attach the last 24 hours of received log below.
May 5 00:59:42 DHCP NOTICE DHCPC Send REQUEST to server d91650b2 with request ip c3cecc76 May 5 02:29:44 OTHER INFO Mail successfully.
I am running ubuntu 12.04, with apache2.My router configuration is set to forward port 80 to my local IP.The problem is I can only access the server as local host. Else it times out (from devices using the same network). I do not have sfw firewall enabled, neither shore firewall.
One of techs accidentally connected two access ports from different switches together. Since then, LMS is alerting them as being Link ports down. I tried to default the config and set them to access ports without any success. what I should do in LMS to recognize them as access ports?
I have been a loyal customer of a hosting company for over 10 years. The main reason I have a dedicated server is to eliminate those shared-hosting issues.For the past 4 years the service has been getting crappier. In fact; this week alone the ftp stopped working, mysql stopped working, and email.It is now to the point I have to move all my domains, mssql databases, mysql databases, email servers and countless files.I have been contemplating to set up my own dedicated server (Mac) and hook it up to my ISP. Most of the websites I host are local - only one or two are national/international.
I have a home network with 3 machines. In switch mode "residential gateway" I can connect to MySql on local network, but not remotely (internet). In "cable modem" I can connect to local both network and Internet, with the MySQL server, but I can only use one machine on the network.
I have opened port 3306 in Windows Firewall and the moden-router and redirected to the IP of the machine that has MySql Server. I have dynamic IP, but my ISP gives you the same IP by sector, so I can do testing.
How to get my connection to work well on local network and the Internet, using the mode "residential gateway"?
I have an application behind an ASA 5505 that needs to access a mysql database over the Internet. How do IO configure the ASA to allow this remote mysql connection?
Url is not being opened whenever I want to recharge online the sbi page does not open and says connection problem, though I do not have any such problem.
Whenever I click on "Tools," then "Internet Options" in Internet Explorer I get the following message: "This operation has been cancelled due to restrictions in effect on this computer. Please contact your systems administrator
i got a message from "web protection" that told me my outlook express is being opened from a site. i have the site address and the opening IP address.i was just trying to follow leads for a family tree.
To play one i game i need to open ports 7777 and 7778 , to do that i must access my router.When i connect to standard router ip192.168.1.1 it wont work. To solve my problem i checked the name of router and read the official support.My routers model is Speedtouch 546 v6. and at official faq the adress is given, but it still wont work, then i noticed i have second router i think, its used to connect 2 TV for my internet television, its model is Zyxel ES- 105 a , in official support , their given adress wont work.
I need to access my employer's website to make changes from home. At work, I use a Mac and can use the built-in tools in Finder to quickly type in the ftp and log in. However, if I try to go in through Filezilla on a PC, the server never connects. I have tried using SFTP and CyberDuck as a web dev with no luck.
I uploaded my web page on Internet via File Zilla. My web page consisted of 10~ HTML files . Some of HTML pages cannot be opened by any browser ( The requested URL /scenos.html was not found on this server ), however, when i open my web locally ( from my hard drive) everything works perfectly
I keep getting random moderate Nat sometimes, other times its opened. I have made a static Ip and port forwarded 4 ports that xbox uses. 88 udp..3074 both...53 both...80 tcp... Now when i test my connection on the xbox dashboard a message will come up saying make sure my UpNp is enabled, which it is and it tells me to make sure port 3074 is enabled which it is. I have restarted both my modem and router multiple times to try and fix this.
I have a linksys cisco e4200 and I recently updated its firmware which i thought would possibly fix the problem.I have talked to linksys but no luck.I have talked to my internet Cox Communication but they tell me its the router and i believe it is because when i directly connect my xbox to the modem i never get the moderate Nat. I have also talked to Norton about my virus protection because I thought maybe it was blocking some ports, but they disabled it and I still get the message.
We have a network drive (drive with Rj45 port) and it is shared by many computers. Frequently we are facing a problem while opening a file and we get the error message "The file is opened by another user" and can open only as ready only.
How can I find who has opened the file in the network drive?
How do i closed/stealth port 22. I did try a different model router, it shows port 22 stealth with grc.com online port scan.But the new upgraded firmware router 2wire 5012NV, tested also at grc.com show port 22 opened.
I bought a gigabit NAS to replace my existing 100Mb NAS. After copying the data and users from the old box to the new (during which both NAS boxes worked fine) I renamed the old one to BACKUP and gave the new one the name of the old, FILE_SERVER.
My desktop computer hangs when i use internet linked software like Mozilla and internet explorer. When i got hang i can't do anything but to press the restart on my CPU. But i can access only in Yahoo messenger and skype. It's really weird, I've been using it for a long time but i just only encountered it now. I tried to use my computer in safe mode with networking and it all worked! but why isn't it working in my normal mode. it's so hard
We have recently purchased a Cisco Small Business Pro SRP 527W router, all seems good and it is running smoothly, no disconnections or sync issues like our last router. However, after a certain amount of time the web management interface is unavailable through the browser (accessing it via 192.168.1.254 or the alternative we set-up 1.1.1.1) It is totally unavailable and timeouts in the browser yet there is still internet access and network is still alive. The web management interface was accessible before though and the only solution I have been able to do to access it again is to reboot this router.Could it be possible that because port 80 is forwarded to a different IP it interferes with the Web management interface? And how wcould the interface port access be changed?
Offsite Central Office -------- ----------------- --------------- ------------------------------ ----------------- ---------- ------- | PC | | 3560-EMI | | ASA501 | | Comcast Business | | ASA5520 | | 6509 | | PC | -------- ----------------- --------------- ------------------------------ ----------------- ---------- -------
I've got a VPN L2L tunnel between my offsite and my central office. Everything seems to work most of the time, but every now and then i loose connectivity to random devices.for example, right now I cannot ping the interface on the 3560-EMI, however i can ping the PC on the other end of it. A few minutes from now, the 3560 will be pingable and i will probably notice another device that is no longer accessible.It almost seems as if the ARP table is corrupt or inconsistant. Another example would be 2 separate PCs on the Offsite side, I can ping one but not the other. If i telnet into the 3560 i can ping both PCs without issue, but once i get to the other side of the ASA5520 I no longer can see both devices...A few minutes later the second PC will be visible again from the Central Office.
Experiencing a strange issue with v3 hardware. After a short period of time, I cannot log into the web administration - either locally through standard port or remote through non-standard port get login prompt, enter correct username & password, page refreshes with blank background and first page (status?) never shows.power cycling the router restores access to the web administration page, for an uncertain period of time before it barfs again.
I was running older firmware, updated to newest 4.2.1.02 (?) and same problem. Only thing that is better is the internet didn't completely lock up when I tried to access the administration page, like it did on the older firmware.
