I bought a gigabit NAS to replace my existing 100Mb NAS. After copying the data and users from the old box to the new (during which both NAS boxes worked fine) I renamed the old one to BACKUP and gave the new one the name of the old, FILE_SERVER.
View 16 RepliesMy laptop simply decided to stop connecting to my wireless network.I'm at a loss as to why and what to do. All other devices in my house are getting a perfect signal from the network but my computer either can't find it, or only has 1 green bar and says it cannot connect. I've tried a system restore, I've tried to troubleshoot on my computer and can't figure it out. The weird thing is it is picking up other wireless signals fine (like my neighbors, ect) but just not my home one. Again, it was working one minute, then simply stopped working and hasn't been able to connect at all.
View 14 Replies View RelatedMy Wireless network suddenly dropped out and now wont pick up any wireless devices.
When I go into Manage hardware it comes up saying that the Drivers are not installed for my network Controller. Searching does not find any to install and due to just relocating I cant find my original Disks that came with the laptop.
So I am reduced to sitting next to the router and being hard wired for the internet.
I have a vista laptop connected to internet and a desktop running window XP. I want to make the laptop share its internet connection to the XP desktop but I haven't succeeded. The desktop has 3 Ethernet ports with one showing 3 computer connected together(same on the laptop except has 2 ports). I've tried connecting on all the ports but nothing happened. I googled a lot but the results I found always involved the XP having Internet but not the laptop. The computers cannnot even ping each other.
I did this before but both computer ran Windows XP, so I think it has to do with Vista.
My first PC (XP) is attached to a wireless router via an Ethernet cable and my second PC (Vista) is connected to the same router via wireless. I have shared the files on both PC'S and can access the files of the Vista PC from the XP PC but when i try to access the files of the XP PC from the Vista PC i get the following error :
"\Studyoot (C) is not accessible. you might not have permission"
No Network provider accepted the given Network Path.
I have a family member that is having trouble sharing their printer through the network. He has three computers on the network, two Vista laptops and a XP desktop. The printer is connected to the desktop and works fine on the desktop. The desktop is connected to the modem through a router. The problem is with the Vista laptop. He can not see the printer or even access the desktop at all. Both are part of the same work group. I have file and printer sharing allowed through the firewall. I have tried running the network setup wizard and that did not work. I installed the driver for the printer manually on the laptop and did not work. Everything that I know of related to sharing is turned on.What I find strange is Vista can not access XP but XP can access Vista.
View 7 Replies View Related0ave a WRT110 that provides the hub between an xp, vista and a windows 7 machine but I can't seem to find a way to share files between them.Mapping a network drive, making sure all permissions are set on all machines Es there something like a service that isn't started that isn't started? and is it not started on all systems. I'm going nuts trying to prepare for the up coming school season so that all my kids can get what they need from their individual bedrooms (no cheating that way).
View 1 Replies View RelatedI have my Windows 7 computer and my daughters computer with Windows Vista networked over a wired home LAN. For the most part, everything seems to work fine. I can access files on her computer, and she can access files from mine (photos, music, video, etc.). I set up a shortcut icons on her desktop for easy access to specific folders I am sharing on my computer. Unfortunately, when I share a folder on my computer, she is unable to view any files added after I initially shared it. So I routinely have to go in and share the folder again. It's not a huge issue, but it is annoying. The limitation seems to be one way, as I can access newly added files on her computer, without resharing.
View 2 Replies View RelatedMy system mwill not allow me to turn on the media sharing in the Network and sharing center. I followed the instructions, but It won't allow me to activate it. I tried through the control panel and by right clicking the internet icon.
View 1 Replies View RelatedXP desktop hard wired to router. XP and Vista laptops wireless. Vista has SP1 and both XPs are SP3. All computers can see each other. Vista can access the XP drives. The 2 XP computers can access each other. The 2 XP computers cannot access the VISTA. Access is denied. Firewalls are off on all computers. I have tried permissions on both sharing and security tabs with no luck.
View 14 Replies View RelatedMy Vista can not open/view XP files, though XP can open/view Vista's.My Vista can ping my XP. My XP can ping my Vista.My XP can open/view files on my Vista. But when using my Vista, and I click on the XP computer showing in my Nwtwork to open my XP wireless laptop (Averatec) files, I get the error message (many have seen before): [code] I turned off all firewalls and all anti-virus software.All computers have the identical Workgroup name. NetBIOS over Tcpip is enabled in the Vista.In "Services" I made sure these items were "Started": [code] I even tried changing the Registry key:HKEY_LOCAL-MACHINESYSTEM CurrentControlSetControlLsa "restrictanonymous REG_DWORD to 00000000, but regedit wouldn't allow the change.
View 19 Replies View RelatedI changed recently my wireless router (and my ISP) and since then the Network and sharing center lists two networks, both with Local and Internet access.One has the SSID assigned to the router and the other is name "unidentified".All seems to be working fine but i'd like to clean up the mess and remove this undefined thing.I have a vista home premium. The wired NIC is disabled, The wireless is set to dhcp with ipV6 disabled. Am attaching below the ipconfig /all.
Windows IP Configuration
Host Name . . . . . . . . . . . . : pavi
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
I cannot download or view ASPX files. What do i need to do. My other computers work.
View 1 Replies View RelatedSuddenly Can't access shared folders but others can . Laptop with Vista. Had many Mapped [COLOR=blue !important][COLOR=blue ! important]Network [COLOR=blue ! important]Drive[/COLOR][/COLOR][/COLOR] issues about 2 months ago. Finally all resolved. Laptop was gone from our shop for about 2 weeks. Now it cannot see the Shared Folders (except for Public and Printers), and could not re-connect the Mapped Drives. Accesses Internet, can Ping the other PCs(all running Win7). Connect thru Wireless.
Why SUDDENLY, there are no shared folders visible on a Laptop?
Notes: This is the 2nd time this has happened. I changed alot of settings the first time. I re-checked all the settings this time.
Update: Magically works today 12-3-12. But what caused it? Why does Vista loose the ability to map network drives, when nothing
changes...I still want to know why for the next time this happens.
I've created a workgroup on windows 7 Laptop to connect with 2 other system, one is PC with win7 and another is laptop with win vista, I've a wirless wi-fi switch. Problem to share file with Windows Vista only, PC with Windows 7 is working well, But Windows vista laptop can't connect with any of two systems...
View 1 Replies View RelatedWe have three desktops...2 Macs and a windows vista...my brother has a windows vista laptop, my mum has a Macbook laptop and for Christmas I got a windows 7 laptop! But that's not all that relevant because all I am really interested in is setting up file sharing between my old vista desktop and my new windows 7 laptop, so I can transfer my music, etc across. (I know that I could easily do this by other methods but I want filesharing set up for the future).Both computers are wirelessly connected to a Netgear router.Initially i tried fiddling around with various network settings and I've managed to get the two computers to recognise each other...and they can access the 'public' folder. I tried fiddling with advanced sharing to let them access other folders which appear as shared folders, but when i tried to access them from the other computer i was denied access.
View 1 Replies View RelatedOn my desk in my basement I have two computers, one HP Pavilion running Windows 7, and a Dell Precision running Windows Vista. Now I was wondering if it is possible to share the internet received on the HP to the Dell by the ethernet connections?
View 1 Replies View RelatedI need to access my employer's website to make changes from home. At work, I use a Mac and can use the built-in tools in Finder to quickly type in the ftp and log in. However, if I try to go in through Filezilla on a PC, the server never connects. I have tried using SFTP and CyberDuck as a web dev with no luck.
View 1 Replies View RelatedI cant access my IP-8186 router, setup my router? i cant ping my router.
View 1 Replies View RelatedThere are some configuration of my Cisco 6506-E, the IOS version is (s72033_rp-ADVENTERPRISEK9_WAN-M), Version 12.2(18)SXF17b
C6506E#show run | b r b
router bgp 64517
template peer-policy Route-Opt
route-map Route-Opt in
route-map BROADCAST_LOCAL out
exit-peer-policy
[code]...
Why the next-hop 202.99.1.30 is inaccessible?
Up to this point, all the computers on the network accessed the e-mail server via the Windows name of the PC running the e-mail server. However, one of the PCs will need to access e-mail from the WAN soon as opposed to the LAN, so I switched the server name in Thunderbird (e-mail client) to the actually fully qualified domain name of the server (registered at NO-IP, which redirects to the e-mail server at home).
The problem I am running into is that all the requests sent for IMAP or SMTP are being blocked by the router. That's even though I added port forwarding rules for them. The logs show messages similar to the following:
"Blocked incoming TCP connection request from 216.168.101.68:51291 to 216.168.101.68:143"
It doesn't make a difference if I change the endpoint filtering to "Endpoint Independent" either. Any thoughts of what else I can try? DMZ is not an option.
I've got the DIR-825 2.02. I had an issue where if you did change the IP adress default 192.168.0.xxx to something like 192.168.yyy.xxx, the configuration page was becoming inaccessible. It was super slow, was displaying the wrong pages with missing images and wrong page formating. I had to reset the router to default and then it was working fine.That seems to have been fixed since 2.05. Now you can change the default ip adress to anything you want and the configuration or setup still work fine.When I am on LAN, the setup page are displayed almost instantly. By remote, it's super slow.
View 1 Replies View RelatedWe have recently purchased a Cisco Small Business Pro SRP 527W router, all seems good and it is running smoothly, no disconnections or sync issues like our last router. However, after a certain amount of time the web management interface is unavailable through the browser (accessing it via 192.168.1.254 or the alternative we set-up 1.1.1.1) It is totally unavailable and timeouts in the browser yet there is still internet access and network is still alive. The web management interface was accessible before though and the only solution I have been able to do to access it again is to reboot this router.Could it be possible that because port 80 is forwarded to a different IP it interferes with the Web management interface? And how wcould the interface port access be changed?
View 2 Replies View RelatedThis is my current config:
Offsite Central Office
-------- ----------------- --------------- ------------------------------ ----------------- ---------- -------
| PC | | 3560-EMI | | ASA501 | | Comcast Business | | ASA5520 | | 6509 | | PC |
-------- ----------------- --------------- ------------------------------ ----------------- ---------- -------
I've got a VPN L2L tunnel between my offsite and my central office. Everything seems to work most of the time, but every now and then i loose connectivity to random devices.for example, right now I cannot ping the interface on the 3560-EMI, however i can ping the PC on the other end of it. A few minutes from now, the 3560 will be pingable and i will probably notice another device that is no longer accessible.It almost seems as if the ARP table is corrupt or inconsistant. Another example would be 2 separate PCs on the Offsite side, I can ping one but not the other. If i telnet into the 3560 i can ping both PCs without issue, but once i get to the other side of the ASA5520 I no longer can see both devices...A few minutes later the second PC will be visible again from the Central Office.
Experiencing a strange issue with v3 hardware. After a short period of time, I cannot log into the web administration - either locally through standard port or remote through non-standard port get login prompt, enter correct username & password, page refreshes with blank background and first page (status?) never shows.power cycling the router restores access to the web administration page, for an uncertain period of time before it barfs again.
I was running older firmware, updated to newest 4.2.1.02 (?) and same problem. Only thing that is better is the internet didn't completely lock up when I tried to access the administration page, like it did on the older firmware.
t's been 4 days in a row now that I can't access wireless Internet on my laptop at a public library that I visit regularly. I have no trouble accessing wireless Internet anywhere else. For several months I have been using wireless Internet at the same library on the same laptop without any problem.Windows troubleshooting message: Windows can't communicate with the device or resource primary DNS serverThe wireless network at the library has no Authentication, it is while accessing a Web-site that it it automatically goes to a page where members have to login, however this hasn't been happening for the last 4 days. I'm able to connect to the network, but with no Internet access. I guess because the DNS won't respond. Here is what I already tried: Disable the firewall and see if that works properly Boot in Safe Mode with Networking and see if it works that way TCP/IP stack repair options for use with Vista or Windows 7 I installed Mozilla firefox.... still no luck[CODE]
View 13 Replies View RelatedWithin a workgroup environment we have four large drives, statically assigned and all accessbile via VPN. Our FW is a Cisco ASA-5505. Where within the ASA-5505 GUI can one of these drives be made inaccessible via VPN ?
View 0 Replies View RelatedI have this 3750 stack where all ports are configured as below.The data runs on VLAN 1 and the voice runs on VLAN 100.
interface FastEthernet1/0/1
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,100
switchport mode trunk
Name: Fa1/0/1
Switchport: Enabled
Administrative Mode: trunk
[code]....
The PCs and Polycom VOIP phones are plugged into the switch and they work fine.However, if I plug printer(s) into the ports, they cannot be accessed.I have to end up removing the trunk mode before it can work like below.
Name: Fa2/0/43
Switchport: Enabled
Administrative Mode: dynamic auto
Operational Mode: static access
Administrative Trunking Encapsulation: negotiate
Operational Trunking Encapsulation: native
[code]....
Basically, I have a LAMP server for a small landing page for myself.It was all working fine until I got my new router.Now, I can only access my sites on a LAN.All the ports (3306, 80, 22) are opened and multiple port checkers online says so.I followed some of the basic steps mentioned in this forum such as firewall settings such as:
"Port and Address Restriced"
disabled QoS
Enabled Multicast Stream
enabled DNS Relay
set DHCP range to avoid any IP conflicts
Ive even temporarily removed all firewalls completely to make sure that is not the problem.
Studio 1558 using Windows 7 64-bit with Netgear DGN1000 router
I can access almost every website with no problem however two sites in particular time out unless I connect an ethernet cable between the laptop and the router. Then there is no problem, the site comes up immediately. The sites are skytv.co.nz and asbbank.co.nz.
I have tried different browsers but that does not make any difference. I borrowed a Toshiba laptop and connected to my wireless network and that had no problem connecting to either site wirelessly so there must be something wrong in my Dell laptop. One difference I noticed between the Toshiba and Dell laptops was in Wireless Network Connection Status the Connection Speed for the Dell is 65.0 Mbps whereas the Toshiba was 150.0 Mbps. I'm not sure what this means and whether it is relevant.
I have reduced the wireless MTU to 1400 from 1500 but still no connection on those sites. It is a nuisance to have to use the ethernet cable to visit two websites when the wireless works fine on every other site.
We have a CSS 11503 with the following partial config [code] it is clear that the server at 10.10.10.222 is active. What we cannot understand is why web site is inaccessible thru load balancer using http://10.10.10.1.
View 2 Replies View RelatedI have a brand new SG500-28P sitting on my desk.
The swtich is configured and going to operate in L3 mode. All ports are still assigned to the default VLAN ID 1. I have created several new VLAN's. Once I configure and aplly an IP Interface to a certain VLAN the swtich becomes inaccessable right away. I am pretty sure I am not pulling my own VLAN under my connection. Every port is inaccessable. I have to pull the power plug and restart the swtich with its saved configuration. Even when I add another IP interface to the default VLAN 1, same issue. I have tried lot's of things, but can't get it to work properly. I have just upgraded to the latest firmware.
I have configured dozens of SG300 swtiches which is very easy. This one does not work with me.
I'm adding another router to my home network to extend my WiFi range. (Linksys e2500.) I'm trying to change its IP from the default 192.168.1.1 so that it doesn't conflict with my primary (dhcp) router.
To isolate matters I've reset the router to factory settings, turned off my mac's WiFi and then connected the Mac to a Lan port on the router. Now I can view the router's admin page at 192.168.1.1.
Now I change its local IP to 192.168.1.3 and leave the subnet as 255.255.255.0. The router reboots and after several minutes is inaccessible at any IP I try (still hardwired to the Mac with WiFi off). Ifconfig doesn't show the router and the only way I can get it back is to factory reset it again.