D-Link DIR-655 - Can Router Map URL To Local IP

Mar 17, 2012

I'm setting up a facility with many different computers where I don't have access to their hosts files. How would I map test.com to a local server without using the hosts file? Can this be done using a simple home router?

I'd like to be able to tell guests: "If you're on our wifi, you can just go to test.com to view our local website."I'd prefer to keep answers hardware-agnostic, I'm using a D-link DIR-655.

How can I map a domain name to an IP address and port?

View 2 Replies


ADVERTISEMENT

TP-Link WR740N Router / Local Access Only When WPA Is On?

Jun 16, 2012

I got a new TP-Link WR740N router and I'm having a problem with it. Everytime I enable security (WEP, WPA etc.) the signal on all notebooks will go "local access only" immediately, even if I use the right password. Router signal is always there, but Internet access will only be available if security is set to "unprotected" on the router setup. Funny thing is that my old router (Linksys WRT54) had WPA2 on and everything was ok.

View 4 Replies View Related

D-Link DIR-655 :: Local Domain Name Settings On Router

Nov 21, 2012

I have the DIR-655 (H/w Ver B1, F/W Ver 2.05NA) set up as router on my network (TWC/RR - modem is Motorola SURFBoard 6121 - modem only, no router or other services provided). I have configured the router sufficiently to allow all computers on the local network to access the Internet, and have configured the DHCP server on the router to provide IP addresses to the local network. I have configured the router to provide the DNS addresses for my local DNS resolvers (so that I can provide DNS resolution for an "internal" domain). Configuration specifics available on request, but everything mentioned so far is working satisfactorily, at least so far.

So, my question: The "Local Domain Name" setting on the router, as indicated in the documentation, provides a connection-specific domain name when DHCP supplies an IP address to the local system. This setting, however, is overridden if the ISP provides a domain name when it assigns an IP to the WAN connection. I have verified by experiment that this is true (no matter what I put in the Local Domain Name field - whether a valid domain, or blank - the local machines receive the domain name supplied by the ISP.I wish to modify this behavior. I wish to have the router provide the domain name specified in the Local Domain Name field *regardless* of what the ISP provides.

View 6 Replies View Related

D-Link DIR-615 :: Router Won't Transmit Wireless When Local Wired Connection Is In Use

Aug 9, 2012

the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gs / Setup Local DNS Server To Manage Small Office Local-only Domain Names?

Apr 22, 2012

i'm trying to setup a local DNS server to manage small office local-only domain names for our servers. i have the DNS working properly (resolving local machines and using the ISP dns if it can't). so i put the DNS server ip into the "Static DNS 1" field of the router settings. the other 2 static dns fields are empty.the problem is that the router is still using the ISP dns server as the primary and my local dns server as the secondary. i verify this in two places. first, if i go to the "status" tab, DNS 1 shows the ISP server while DNS 2 shows my local DNS server. secondly, if i connect to the wireless device with a linux-based machine, the /etc/resolv.conf file shows the nameserver ips in the same incorrect order.

View 1 Replies View Related

Linksys Wireless Router :: EA2700 Unable To Access DHCP Reservations Link Under Connectivity / Local Network

Sep 7, 2012

I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?

View 8 Replies View Related

D-Link DIR-601 :: Route Website Name To Local IP?

Oct 7, 2011

I'm trying to have a website name:  remote.test.com  route to a local IP address but can't seem to get it working with this router.  I don't want to use the windows hosts file as there are different Operating Systems that will connect and so routing though this D-Link is the only option.  I have my wireless router connected to a separate network switch though it's WAN port where other computers sit as well as the target machine.  I can use the internet as normal like this so things are working fine.

[code]...

View 7 Replies View Related

D-Link DIR-655 :: Set Up Wireshark To Monitor Local IP?

Mar 19, 2012

How do I set up Wireshark to monitor a local IP? 192.168.0.186 I guess I have to do some kind of settings in the DIR-655?

View 1 Replies View Related

D Link DSL 2780 :: Says Local Or Limited Connectivity

Oct 13, 2011

I have an Acer Aspire 5315 running windows vista home basic, version 6002.For some time i have not been able to join wireless networks, but used a long ethernet cable to my room in shared house. yesterday we got a new router and have had to use it wirelessly. it is a talk talk D-Link DSL 2780, and al other housemates are on wirelessly. mine links up (sometimes) but says local only or limited connectivity - both of which mean i cannot connect to the net wirelessly.

View 3 Replies View Related

D-Link DIR-615 :: Wireless Is Local Only - LAN Has Internet Access

Dec 22, 2012

This router was just purchased this past week. I have 1 laptop, 1 desktop, and 1 netbook that is connecting to this (along with various smartphones). Set it all up according to the booklet, and ran into some trouble. When connecting through wireless, I only have "Local only" on the older laptop and desktop PC, but full internet access through the smartphones and the netbook. But, when I connect through LAN with the laptop, I have internet connection (only through LAN, not wireless). I suspect this also occurs on the PC, but the two are no where near each other to attempt. I installed the latest firmware version to no avail, and had done a full reset on the router and reinstalled it.

View 1 Replies View Related

D-Link DIR-655 :: Local Names Don't Resolve On New Cascaded

Jul 15, 2011

1. I have a DSL modem + wireless + router
2. I have a Vonage phone that taps into one of the LAN ports
3. I have DIR 655 router that taps into one of the LAN ports
4. I have NAS that taps into one of the DIR 655 LAN ports
5. I have Printer that taps into one of the DIR 655 LAN ports
6. I have a BD Player that connects to DIR 655 through wireless.

All my components that are tied to DIR-655 resolve through IP address. I would like to have the resolution through host name as it works with my first router (DSL Modem / Router). Identifying components with IP address is not only inconvinient in terms of reading / recognizing my components but ther could be other issues. I am not very techie on the networking side but I do have some basic knowledge.

View 6 Replies View Related

D-Link DIR-655 :: Can't Browse Local Area Network

Jan 10, 2011

I am not able to browse my local area network. I get internet fine. I have a vista laptop connecting wirelessly and the dir-655 is connected to a giga switch. The rest of my network is connected to that switch.

View 13 Replies View Related

D-Link DIR-615 :: Internet Crashes On Local And Wireless

Nov 10, 2012

I have an dir-615 h2 with upgraded firmware to 8.03 instead of the default that was 8.02, now it crashes and i cant reach the router on cable or wireless. its dead and i have to restart it to work.. where can i find the h2 8.02 firmware.

View 7 Replies View Related

D-Link DIR-655 :: Refusing Local Connections - No External IP Address

Aug 22, 2011

I couldn't find a section for the 651.

Alright so I have an SSH server running on my network. I can successfully connect to it from a local computer using the server's internal IP address, AND I can connect to it from a remote computer using the server's external IP address (it's properly port forwarded).

However, when I try to connect to the server from a local computer using it's external IP address, I get a connection refused error. Is there something I'm missing?

View 7 Replies View Related

D-Link DAP-1522 :: Devices Local Do Not Show On Network Map

May 17, 2011

This is the configuration I am running:Internet > Cable Modem > Netgear WNDR3700 Router ~~ DAP-1522 > Wired Windows 7 PC + Linux PC + Printer.The Windows 7 and Linus PC's do communicate well to the internet as do any laptops accessing the router wirelessly and any devices wired to the router. That is the good news.

The bad news is that any devices located after the DAP-1522, including the DAP-1522 do not show up on the network map of either the router or any of the wireless laptops. Neither does the Win 7 PC connected through the DAP-1522 show any networked devices, whether through the DAP-1522 or not, even though network discovery is turned on.

Right now the DAP-1522 is set up to function as a bridge and is in "Static IP" mode. I tried changing it to DHCP, but the DAP-1522 will not allow saving that setting, even though it will allow changing it. It just reverts back to "Static IP". The firmware version is 1.31, and the firmware update went well after a workable logon to the admin page was discovered. Also the one-button (WPS) set-up to the router worked as far as allowing an internet connection.

What needs to change to allow all the devices to show up on the network maps and maintain internet access? Ultimately, I would like to stabilize the IP's of the major components of the network to make troubleshooting easier. But to do that the devices need to show up on the network maps, particularly of the router, so they can be added to the IP reservation table by selection.

View 2 Replies View Related

D-Link DIR-655 :: Can't See Hard-Wired Printer On Local Network

Dec 18, 2010

I recently purchased a DIR-655 and everything's working fine -- Internet access, visibility of local shares, etc. -- with the one except accessing to my printer (Brother MFC-7440N) that's hard-wired to a port on the router.After installing the latest PC SharePort Utility on my two Windows 7 desktops, they're both able to connect and use all of the features of the printer (print, scan, etc.). However, I can't say the same for my two Macbook Pro's connected via WiFi (802.11N).  I installed the latest Mac SharePort Utility on both, but neither can "see" the printer.  Caveat:  If I connect the laptops via a LAN cable (ie. hard-wired directly into the router), they're able to see the printer.  how to configure the router (or Mac) to allow them to see the printer? 

View 9 Replies View Related

D-Link DCS-942L :: How To Exit Fullscreen Via Local Browser

Mar 25, 2013

I'm not sure if it's different when you log in remotely via mydlink, but by using the web based interface localy (by ip address) I can't find a way of exiting full screen option under live view.  I tried the obvious escape button.  Right-clicking does nothing, and double clicking actually makes it truly fullscreen (aspect ratio gets stretched to my monitor 16:9 btw, instead of retaining 4:3.So is there a way to exit?  Using chrome, maybe it's a chrome issue and it works differently in other browsers but I see no mention in the manual of exiting fullscreen.

View 4 Replies View Related

Cisco VPN :: Properly Link 2 Local Vpns RV042

May 22, 2012

The current setup we have contains two seperate networks, each managed by their own Cisco RV042 (10/100 4-Port VPN Router), and each  have their own connection to a Comcast Business Class SMC Modem. (Each has its own static WAN IP provided by Comcast). Both VPN routers have VPN access configured allowing us to connect to our company's corporate intranet and network, and vice versa. Just as a reference point, We will call the first VPN 'GamesNetwork' and the other one 'AdminNetwork'. A problem came up where the computers on AdminNetwork could not access the resources of the GamesNetwork. The problem was resolved by our at-the-time official corporate IT guy but the solution was never explained to me. Recently i got curious and went into the config pages and found that each VPN router was linked to the other the same way corporate links to our VPN's, whch is by using the Internet IP of that vpn... So to me this says we are linking two local vpn networks using their internet connection which is on the same modem.. to me this seems messed up. is this really the way it needs to be done? Now... I have thought of the idea 'make the two networks into 1..' and it could work. but.. i dont have the permission to make this happen.
 
if you have two vpn routers side by side in the same room, is there a more local means of giving 1 vpn access to the resources of the other and vice versa? 

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N And Vista Local Only Access?

May 14, 2013

Region : UnitedKingdom
Model : TL-WR841N
Hardware Version : V8
Firmware Version : 3.13.27 Build 121101 Rel.38183n
ISP : Virgin Media

I have recently purchased and installed a TL-WR841N wireless router to replace an older system. After following all of the quick install guide and the like I got it set up and working correctly both wired and wireless. However one laptop in the household, an Acer Aspire 5315 running Windows Vista 32bit, does not connect. Using an ethernet cable works fine but the wireless signal is seen and appears to connect but does not find the internet and states Local Only Access.When connected wirelessly I also cannot ping the device but when connected with a cable I can and get a good return.The firmware is up to date on the router and the latop is full up to date with drivers and windows updates.

View 2 Replies View Related

TP-Link 150Mbps Wireless :: WR741ND Does Not Route Between Local LAN And The Internet

Dec 1, 2012

Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.13.12
ISP : Triple C

I'm trying to set up my new WR741ND router to replace the old WR541G with excctly the same cabling,ISP account etc.
All seem to be working i.e. I get the PPPoE connection against the ISP and cat ping by name to Internet addresses from THE ROUTER.Also I get DHCP handing out addresses both to my desktop connection by Ethernet cable and to my laptop via Wifi.And the computers may ping the router and also connect its admin GUI.However,the computers stop at the router and can't go further.All they can go is to the router as if it doesn't route between LAN and WAN.With the 541 router everything works and as I said it has the same setup (very basic,no static routes or anything too smart).

View 4 Replies View Related

TP-Link ADSL2+ Wireless :: TD-VG3631 Call To A Sip Local Asterisk Station

Mar 19, 2013

-Region : Spain
-Model : TD-VG3631
-Hardware Version : V1
-Firmware Version : 0.6.0 1.0 v0001.0 Build 130108 Rel.54595n

I have a problem with the VoIP feature of this router:I configure the router as a sip station of a asterisk local PBX (192.168.1.254),To this point everything is fine, I can call with a asterisk sip station to a analog phone (sip station 100) that is conected to the FXE port of the TPLINK,The problem occurs when I want to call with the analog phone to a sip station. I have a dial plan with a 0 prefix to call stations using the sip acount:Profile Name Registrar Address Phone Number Status Remove Edit Prueba192.168.1.254100up.And when I call, I can see in the log the INVITE action.

View 1 Replies View Related

TP-Link 300Mbps Wireless :: TL-WR841N - Local File Inclusion Vulnerability

Apr 14, 2013

Apparently there is a vulnerability issue which was just discovered with TP-LINK TL-WR841N wireless router running firmware version: 3.13.9 Build 120201 Rel.54965n and below,as described here: [URL] and here: [URL] there latest firmware 3.13.27 Build 121101 Rel.38183n already addressing this issue or is there any other planned correction expected to address this vulnerability issue ?

View 5 Replies View Related

D-Link DIR-825 :: Pinging Local Computers On Network Brings Back A Foreign Ip Address

May 23, 2012

when I ping another workstation on my local network I should get back it's local IP but instead I am getting an ip address that resolves to somewhere in Germany!  In fact if I ping any bogus name, I mean anything, it returns this same address 62.116.181.25.  If I shut down my cable modem then everything resolves correctly.  And yes I have DNS relay enabled because it seems to be the only way to get the workstations to resolve external sites correctly. 

View 2 Replies View Related

TP-Link ADSL2+ Wireless :: TD-VG3631 Call To A Sip Local Asterisk Station / LAN VoIP?

Mar 19, 2013

Region : Spain
Model : TD-VG3631
Hardware Version : V1
Firmware Version : 0.6.0 1.0 v0001.0 Build 130108 Rel.54595n
ISP :

I have a problem with the VoIP feature of this router:I configure the router as a sip station of a asterisk local PBX (192.168.1.254),To this point everything is fine, I can call with a asterisk sip station to a analog phone (sip station 100) that is conected to the FXE port of the TPLINK,The problem occurs when I want to call with the analog phone to a sip station. I have a dial plan with a 0 prefix to call stations using the sip acount:Profile Name Registrar Address Phone Number Status Remove Edit Prueba192.168.1.254100up And when I call, I can see in the log the INVITE action :

32013-03-19 10:16:33OTHERDebugport 1 cx 0x3, evt/reason 3/0 buf (nil)
42013-03-19 10:16:01OTHERDebugport -1 cx 0x3, evt/reason 1/4 buf 0x4761a8
52013-03-19 10:16:01OTHERDebugthe initial INVITE request for [accIndex(0),callIndex(3) dest(<sip:103@192.168.1.254>)] is sen

But I�am sniffing traffic in the PBX and not received the invitation... Obviously the 103 station never recive the call...I think that maybe the INVITE is going out behind the WAN interface.... bug version?

View 1 Replies View Related

TP-Link Dual-Band Wireless :: TL-WDR4300 / Resolving Local PC Names On Non-windows Devices

Jan 30, 2013

Region : UnitedKingdom
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820
ISP :

Region : UnitedKingdom
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820
ISP : BT Infinity

I am running a Windows Home Server machine called "mserver" that has an IP address supplied via DHCP.There is also a local webserver running on port 8089 that I use to access media from several devices (Android Phone, Blackberry Playbook & HP Touchpad...i.e. not Microsoft).When I had the BT Homehub3 in use I could access the webserver via http://mserver:8089 and it would be loaded on all devices. With the WDR3600 used in place of the Homehub3 it cannot resolve mserver into a local IP address on a non windows device. I can access it via http://192.168.0.xxx:8089 so the route is there.Does the WDR3600 have any local DNS resolution? I repeat the BT HomeHub3 CAN do this, so why can't the TP-LINK?

P.S. I have tried :-

Disabling hardware NAT
Turning off UPNP & Port Forwarding
Restoring to factory default
Disabling all ALG's in security

View 3 Replies View Related

Broadband :: DC++ Local LAN Sharing Using Router?

Sep 5, 2011

i am trying to use ApexDC++ using a wifi router for local LAN sharing.The problem is that when i connect the LAN cable on LAN port of the router i am able to connect to local HUB but at the same time unable to connect to internet. And when i connect the LAN cable on internet port of the router i get connected to the internet but unable to connect to local HUB for LAN sharing.I have tried port forwarding also but of no use.

The ip details provided for local LAN sharing is,
LAN IP - 192.168.100.3 - 192.168.100.xxx
Subnet mask - 255.255.255.000
Default gateway - 192.168.100.1

This is the configuration on the LAN port of my wifi router. Where as when i connect the LAN cable on the internet port of router, it takes the ip automatically from server (DHCP) which is not the same as ip detail provided for LAN sharing hence unable to connect to local HUB. If i try to configure the internet port of the router with above configuration i am unable to connect to local HUB as well as internet.I want to connect to local HUB while connected to internet using a wifi router.I don't find any problem while connected directly. I have configured my computer's LAN card manually with the above configuration provided for LAN sharing & able to connect to internet as well through dial up connection.(connected directly without using a router).i am unable to figure out the difference between the two (direct connection & while using a router.

View 2 Replies View Related

Unidentified Local Only New Router Huawei HG533

Oct 25, 2012

I have just installed a new router, a HUAWEI HG533 I am not able to connect wirelessly with my Acer Aspire 5520 (with Vista home premium).I can connect my new router using the ethernet cable, and last time I tried my old router would connect wirelessly.If I hover over the network icon, it says 'Unidentified Acess:local only'My smartphone (and my wifes) will connect (but oly mine to the old router!).I have tried removing the microsoft 6to4 adapters (suggested on another forum) this didn't work. (I then re-installed, no better).I've had a look at other posts on this forum, and Have done a couple of the tests suggested (wireless and mini toolbox, which I will post separately as it exceeds 20000 characters!)I have tried support from my ISP (who also supplied the router) and got a generic email in response, no luck.

View 14 Replies View Related

Routers / Switches :: Only Can Get Local Connection On Router

Jul 27, 2011

When I try to set up my Belkin mondem router I can only get local connection only as soon as i remove the wired setup cable. The routor itself is connect to the internet and other laptops can connect when given the password. I tried to set it up on a different laptop and got the same result. I have reset the factory setting and tried again with the same result I connect to the routor but not the internet. If I reconnect my talktlalk routor there is no problem.

View 5 Replies View Related

Cisco VPN :: Initiate VPN From Router On Local LAN Behind ASA 5540?

Sep 16, 2012

We currently have an ASA with site to site VPN and anyconnect VPN being utilized. We received a third party  cisco router which will  be used to initiate their own site to site VPN from inside our local LAN to their LAN through our ASA.
 
1. Would NAT Traversal be required on our ASA? 5540(config)#crypto isakmp nat-traversal

2. Would the ports listed below interfere with ports for site to site VPN and anyconnect VPN?

SSH
- allow access from xxxxx on TCP Port 22
ICMP
- allow access from xxxxx - protocol 1
ISAKMP
- allow access to xxxxx on UDP Port 500, also add UDP 4500 for NAT-T

[code]....

View 1 Replies View Related

Lost Wired / Local Connection After Brand New Router

Sep 22, 2011

After a brand new Router/Modem combo., there is NO local/wired connection with XP, although other PCs has a good connection with strong signal.

Is it because a spectific folder needed for wired/local connection got lost, .... or Networking card inside got defective?

View 3 Replies View Related

Pinging Local Router But Receive Direct Reply From ISP?

Oct 3, 2012

Lost Internet connectivity at home. connected via dsl line to my isp.when i issued ipconfig /all command i noticed that default gateway IP addr was a global ip addr. (77.36.x.x) instead of the usual private address 192.168.1.1. DHCP server had IP address 58.206.x.x when i issued ping 192.168.1.1 command, i got this output: "reply from 77.36.x.x: destination host unreachable" i couldn't access my router's configuration menu by typing 192.168.1.1 in web browser's address field.it's very interesting, because i had network issues before but could access my router's config menu and ping it. but now, i cannot reach my local router but receive reply from ISP's router.

View 10 Replies View Related

Stop A Local Internet Connection From Using Computer Or Router

Sep 22, 2012

How I can stop a local internet connection from using my computer, or the router? I am using high speed through frontier. I have deleted this local internet connection once before. When they or it connects to my stuff, I cannot get online. It says, Unnamed Network - Unsecured Network.Radio type 802.11g with excellent strength.

View 1 Replies View Related

Linksys Wireless Router :: E1000 Only Local - No Internet?

Jun 30, 2011

my brand new Linksys E1000 wireless router. I am really struggling and cannot figure out what I am doing wrong.
 
I live in The Netherlands, have a modem (DSL I think...) and can connect wired through the modem with no problems.
 
I installed the E1000 with the CD, followed all the steps and my laptop is finding the network. However, it's only local, no internet and I don't understand why. Have tried to connect (wired) my computer to the E1000 and the E1000 to the modem but that doesn't work either.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved