D-Link DIR-655 :: Error On First Time Dial - Cannot Connect To Internet
Mar 23, 2011
I just got a dir-655 revb, and it does not connect to the internet. I have DSL, and the old router works fine with PPPoE, when I configure my dir-655b router, it can not connect to the internet. I get the flowing error:
info Mar 23 22:31:11 rp_pppoe =' read pppoe_conn_session error or first time dial
notice Mar 23 22:31:10 pppd 2.4.3 started by root, uid 0
info Mar 23 22:31:10 RP-PPPoE plugin inform wantimer to reset auth, discovery variable
info Mar 23 22:31:10 RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3
info Mar 23 22:31:10 Plugin /lib/pppd/2.4.3/rp-pppoe.so loaded.
info Mar 23 22:31:05 Exit.
View 3 Replies
ADVERTISEMENT
Dec 28, 2011
It's not on one device, and it doesn't matter if you are connected wirelessly or by cable. It also doesn't matter what internet browser you use. I would guesstimate that every 5-15 mins the dsl broadband just gives and all internet goes down for probably 1-3 mins at a time.I honestly have no idea. I'm using a 2Wire, just what AT&T gave me. I'm guessing it's either the dsl filter, or the actually router itself, i'm just not sure how to go about troubleshooting and figuring out the root of the problem.
View 1 Replies
View Related
Feb 14, 2013
I have another odd issue (I get those alot) I have an asterisk box that moves around between 2 IPs, thus the dial-peers are unpredictable as to their target IP. They work as the dial-peer will eventually (after 1 min) time out and go to the other dial peer, but waiting 1 min sucks, and it's a tiny network, 5-10 sec would be WAY more than enouph. Does anyone know off hand a way to get them to time out faster?
View 5 Replies
View Related
Apr 3, 2012
I have cable broadband internet.My internet modem is a Ubee D3.0.It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via Ethernet.My wifi went down the other day.Devices were connected, but were not getting any internet service.In troubleshooting, I attempted to dial in to the router using url... as well as 192.168.0.1, and I could not get into the router.I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one.I got home and plugged it in, still not working.I can't access it using the above mentioned methods, and the setup software does not detect a router present.I unplugged the router and hooked the computer up directly to the internet modem.Still no luck.The computer does show a network connection in the system tray, but with no internet.I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. even did a system restore to a restore point last week when I know the internet was working..
View 5 Replies
View Related
Apr 3, 2012
I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies
View Related
Aug 17, 2012
I use win7 os and samsung e2652 champ duos mobile. When I connect mobile to pc, the dial-up connection not established and show the error 777: the modem on the remote computer is out of order.
View 1 Replies
View Related
Feb 9, 2013
When i connect the Router 2821 through the Consol get error message at regular interval of time %ENVMON-4-FAN_LOW_RPM: Fan 1 service recommended.
View 2 Replies
View Related
Mar 6, 2012
I'm in an issue w/ on of our ISPs. We're using an ADSL line as a secondary light load line ( 16 MBit, /w PBR in place to separate the 80 and 443 from the business-critical applications running via a SDSL link. ).
I am on a 2611 XM with IOS 12.2, mated to a D-Link 321B modem running in transparent mode. After running smoothly for weeks, for a few days now, every night some time between 2 AM and 4 AM the link would die with the dialer showing:
Virtual-Access1 is up, line protocol is down Hardware is Virtual Access interface [code]....
To my knowledge, the only option to bring it up again is to reload the box . Taking into account that the router is our DHCP server and the date gets reset to 1994, interesting effects are the outcome of resetting the box.
Well, the ISP have checked their gear and keep saying that these report a "port error" ( quite unspecific ) and blame me that I have a wrong. config in place - which is here:
interface Dialer2
description ecotel Bridge
ip address negotiated
no ip proxy-arp
[code]...
View 10 Replies
View Related
Feb 15, 2013
I need to purchase an 64K dial up modem or a 64K dial up external adapter
View 1 Replies
View Related
Jan 19, 2011
Internet cable to dir655 and cat5 to master computer with slave using wireless. Network between them always works fine. But if master connects to internet the slave will lose the internet until the master disconnects. like it won't share the signal.
View 1 Replies
View Related
Feb 24, 2012
First I tried restricting all computers from accessing the internet from 11:00PM to 6:00 through access control. I enabled it and set up the schedule but it does not cut off the internet. I went through create a new schedule and did that but again it still connects. Then, in access control, I selected always and put in my son's IP address and created a schedule for him but it won't allow him any internet access.
View 2 Replies
View Related
Apr 14, 2013
I set up a DIR-655 router for a friend 4 years ago and it's worked reliably with all of their equipment since. They have wireless printers, iMacs, pc laptops and iPhone 4S's, all connecting without any problems. Recently, they got an iPhone5 and it will not connect to their home wireless automatically, they have to re-enter the password each time. They've tested their iPhone 5 on other networks and they do not have to re-enter the password. Apple and ATT are blaming the router. I do not live near them and I'm going to have to facilitate them remotely. At this point, I believe their router is configured with WPA2, but I can't be sure. Which configuration will work with the iPhone 5, as well as their other, older, devices that have worked for 4 years
View 1 Replies
View Related
Jan 27, 2011
I am trying to set up a d-link router with a modem provided by time warner cable. I've powered down, reset the router, and I've put it on dynamic settings (sorry if that's incorrect terminology... not a comp. buff). I can't get my wireless to connect to internet.
View 1 Replies
View Related
Jun 28, 2011
My wifes Wifi is down. Need to connect to AOL via dial up.How can I get to internet to do so.
View 1 Replies
View Related
Nov 5, 2011
i have a PPPOE type of connection for my modem and just now my router is blinking both lights Orange and blue at the same time....but the internet is still connected..
View 14 Replies
View Related
Jan 10, 2012
AI have a Dir-825 router. The 5GHz is turned off and the wirless is on G/N. I have shawcable for my isp and my firmware is 2.06 and its a Rev B Router. I also have Qos Engine on for allowing me to have 2 xboxes on Open NAT.problem is my wireless signal for some wired reason is VERY weak. A while ago it used to work really far way outside. It was around 150ft distance at 4 bars. Now for some reason I can't even go upstairs without getting a 1 or 2 bar signal.
View 3 Replies
View Related
Sep 1, 2011
i have had my dir-655 one year now, have never had wireless problems with it until now.my notebook's internet gets very slow somedays, i just restart my router and then internet speed works normally.i have:
Hardware Version: A4 - Firmware Version: 1.32EU
View 5 Replies
View Related
Jul 31, 2012
My daughter is on an Army Base in the South Pacific. They have Dial up internet on their home telephone not DSL. They have high speed wireless at the base community center/coffee shop. I will be going there in 9 days to install the dir-615. She has a Dell Desktop with Vista Basic SP1, laptop with XP, IPAD2 and a NOOK Tablet. The dir-615 HVE1 with firmware 5.00na on the bottom sticker. She said she was able to go to web address, login, change the user name and password, started on the wireless configuration and she paniced. My question is basically this. by using a cat5 cable from the desktop to the dir-615 with dialup internet connected can the router be setup using the automatic method as opposed to manual. Our first priority is to be able transfer files to the 2 tablets without being connected to the internet like a switch and secondly If possible go on to the internet from a Tablet or the Laptop. I assume the second option would reuire internet sharing option when setting up the network and performance would be ugly.
Can get I get this router to work this way with just dialup to set it up
View 5 Replies
View Related
Sep 30, 2011
I have two pcs not connected other than keyboard and monitor. Both have identical USB dial up modems. I PC running Windows XP connects every time, the other running Windows 2000 connects only sometimes. Like this morning it connected on the third attempt and I was able to move a lot of files. When I tried again later I got five attempts and then "no answer".
View 3 Replies
View Related
Jan 18, 2011
I have an HP desktop and an Acer Aspire 16" laptop that I have had for 2 years. The laptop has built in WiFi, but luckily has a 56k modem also. Now for the problem....Saturday my husband bought me a wireless Velocity Cruz 7" color Tablet. I has been told in the past that all I had to do was buy a wireless router and plug it into the phone line. But today I called both Radio Shack and Office Max and asked if you could hook up a wireless router to dialup and both places told me absolutely not because dialup was too slow.
View 1 Replies
View Related
Jul 23, 2011
How to connect two or more internet connections at same time to increase internet speed ?
View 1 Replies
View Related
Oct 20, 2011
Can I connect a router to a dial up connection and get wi-fi?
View 2 Replies
View Related
Mar 23, 2012
My son connects his xbox360 to his laptop that uses a wireless access to the router. My husband and i both have a laptop and when we try to log on to the internet it takes forever or doesn't connect at all while son is on his xbox 360. Do I need to change up my router?
View 1 Replies
View Related
Jul 27, 2012
I've had my DIR 615 router for quite some time. The hardware version is C1, firmware 3.01 originally. It's been fine for the most part (asides from connection issues now and then with the internet - which we rectified by unplugging modem and/or router). A couple nights ago we had a storm and the next morning the router would not connect to the internet. I tried unplugging the router and modem a number of times but could never establish a connection. The internet globe LED was originally orange but after I cut off the power, it never came back on. I tried a number of different cables between the modem and router and could not fix the issue. I bypassed the router totally and the internet works fine. After a lot of failed attempts, I decided to reset the router and reinstall it with the disc. I followed the instructions and kept getting error 322 that the router could not be found. I tried 3 different computers and 5 different wires to fix the problem but to no avail. I kept encountering the same error on each computer. Since the router can't be seen, I must bypass it totally to get any internet access so trying the online setup doesn't work because I can't connect to the router and then to the modem since there is no internet access. So now I'm stuck. I'm not sure if my router is damaged from the storm. All other lights work (LAN and wireless icon) but I can't get any internet access through the router. I'm not sure if I should just go buy another router or not. The installation checks out fine until connecting power to the router and then it can't be found.
I am running windows 7 and vista on different computers and laptops and used setup 4.1.7141.2
View 1 Replies
View Related
Jun 13, 2011
We are having dialup 15 connections in router 3845 model IOS version 12.4 1A.We are unable to have a connection between dialup branches to headquarter. these are the command
aaa new-model
!
!
aaa authentication login telnet local
aaa authentication login ppp local
aaa authentication ppp ppp local
[code].....
View 7 Replies
View Related
Jul 19, 2011
Is it possible to run both LAN connection and dial-up modem for internet on the same system?
View 11 Replies
View Related
Sep 12, 2011
How can I share a dial up VPN Broad band internet connection over wifi i want to share this dial up connection at my laptop over wifi what necessary hardware require to share internet wireless at my laptop.
View 4 Replies
View Related
Oct 3, 2011
I have ADSL modem in my workplace that is connected to a switch and other workplace computers are connected to this switch so the ADSL internet is shared in LAN network.(in each of computer I set default Gateway to ip of modem .....) I want to dial my workplace from home and then use of workplace internet or connect to workplace LAN.(such as VPN or Port Forwarding or I don't know...)
View 1 Replies
View Related
Jul 30, 2012
Our ISP provider made our internet connection a dial up. Last time it automatically connects to internet without putting those username and password. So after they changed it only our server pc have internet. Others don't have. The technician from the isp provider keep telling that the switch(but he keeps telling us its a router dunno why) need to be configure but switches dont need to be configure right?
View 3 Replies
View Related
Feb 22, 2012
I use a Dimension 3000 desktop. I cannot dial in to my ISP (Juno). Each time I try, it responds "can't dial in". I checked the connection, that's ok. I checked the phone line and that's ok. A box pops up that says "system service not working go to Help & Support" When I try to go to Help & Support, a box pops up "system service not working".
This all began after I used an AVG PC Tuneup. Since then the bottom line colors changed. For example, where START was green with white letters and the windows colors symbol; it is now WHITE with Black letters only. Where bottom line across was blue, now it too is WHITE.
I can pull up WORD, Games,etc. but am unable to dial in to get to internet.
View 2 Replies
View Related
Mar 15, 2011
Unable to connect to the Internet. Connected from modem to router to computer. Called my ISP and told to connect directly to modem. Still unable to connect to Internet getting 169 error. What else should I try to get online?
View 11 Replies
View Related
May 22, 2011
After setting thru set time command, error message is display on server 'synthetic time issued'.
View 2 Replies
View Related
Jan 18, 2012
I cannot access the internet from my computer. The message says: runtime error program:c/windows/networkdiagnostic/xpnetdiag.exe I did two things today:
1. instal avast anti-virus (which I have since uninstalled)
2. connected my iphone 4 to my computer (perhaps for the first time)
There is no problem with the actual internet connection and there are no other problems with my computer.
View 1 Replies
View Related
