Wireless :: Connect To Dial-up Using Router?
Jan 18, 2011
I have an HP desktop and an Acer Aspire 16" laptop that I have had for 2 years. The laptop has built in WiFi, but luckily has a 56k modem also. Now for the problem....Saturday my husband bought me a wireless Velocity Cruz 7" color Tablet. I has been told in the past that all I had to do was buy a wireless router and plug it into the phone line. But today I called both Radio Shack and Office Max and asked if you could hook up a wireless router to dialup and both places told me absolutely not because dialup was too slow.
View 1 Replies
ADVERTISEMENT
Oct 20, 2011
Can I connect a router to a dial up connection and get wi-fi?
View 2 Replies
View Related
Apr 3, 2012
I have cable broadband internet.My internet modem is a Ubee D3.0.It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via Ethernet.My wifi went down the other day.Devices were connected, but were not getting any internet service.In troubleshooting, I attempted to dial in to the router using url... as well as 192.168.0.1, and I could not get into the router.I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one.I got home and plugged it in, still not working.I can't access it using the above mentioned methods, and the setup software does not detect a router present.I unplugged the router and hooked the computer up directly to the internet modem.Still no luck.The computer does show a network connection in the system tray, but with no internet.I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. even did a system restore to a restore point last week when I know the internet was working..
View 5 Replies
View Related
Apr 3, 2012
I have cable broadband internet. My internet modem is a Ubee D3.0. It is connected to my Netgear N600 Wifi router which have my computer and DirecTV hooked up to it via ethernet. My wifi went down the other day. Devices were connected, but were not getting any internet service. In troubleshooting, I attempted to dial in to the router using www.routerlogin.net as well as 192.168.0.1, and I could not get into the router. I assumed the router must have crashed, and I only purchased it a month ago, so I took it back to the store and exchanged it for a new one. I got home and plugged it in, still not working. I can't access it using the above mentioned methods, and the setup software does not detect a router present. I unplugged the router and hooked the computer up directly to the internet modem. Still no luck. The computer does show a network connection in the system tray, but with no internet. I plugged my laptop in to the internet modem, and I am able to get internet just fine from my laptop. I even did a system restore to a restore point last week when I know the internet was working. No luck.
View 5 Replies
View Related
Feb 15, 2013
I need to purchase an 64K dial up modem or a 64K dial up external adapter
View 1 Replies
View Related
Jun 28, 2011
My wifes Wifi is down. Need to connect to AOL via dial up.How can I get to internet to do so.
View 1 Replies
View Related
Sep 30, 2011
I have two pcs not connected other than keyboard and monitor. Both have identical USB dial up modems. I PC running Windows XP connects every time, the other running Windows 2000 connects only sometimes. Like this morning it connected on the third attempt and I was able to move a lot of files. When I tried again later I got five attempts and then "no answer".
View 3 Replies
View Related
Jun 13, 2011
We are having dialup 15 connections in router 3845 model IOS version 12.4 1A.We are unable to have a connection between dialup branches to headquarter. these are the command
aaa new-model
!
!
aaa authentication login telnet local
aaa authentication login ppp local
aaa authentication ppp ppp local
[code].....
View 7 Replies
View Related
Mar 23, 2011
I just got a dir-655 revb, and it does not connect to the internet. I have DSL, and the old router works fine with PPPoE, when I configure my dir-655b router, it can not connect to the internet. I get the flowing error:
info Mar 23 22:31:11 rp_pppoe =' read pppoe_conn_session error or first time dial
notice Mar 23 22:31:10 pppd 2.4.3 started by root, uid 0
info Mar 23 22:31:10 RP-PPPoE plugin inform wantimer to reset auth, discovery variable
info Mar 23 22:31:10 RP-PPPoE plugin version 3.3 compiled against pppd 2.4.3
info Mar 23 22:31:10 Plugin /lib/pppd/2.4.3/rp-pppoe.so loaded.
info Mar 23 22:31:05 Exit.
View 3 Replies
View Related
Jan 25, 2012
can i use a AT&T Router for dial up
View 1 Replies
View Related
Mar 22, 2011
The PPPoE connection can be successfully established only if the PC dials up, but not if the router replaces the PC to do so.Both the PC and the router are identically configured for this purpose, i.e. using the same ADSL dial-up account(usr/passwd pair). As a whole, we can exclude any wrong configuration on the router itself.
View 3 Replies
View Related
Nov 20, 2012
I have a cisco 1941 ISR router and I am trying to configure a router to allow a modem for "Offband or Out of band" access.Below is the configuration on Aux port on Line (n):
line aux 0
login local
modem InOut
transport input all
speed 115200
flowcontrol hardware
I have US Robotics 56k Faxmodem which is connected to aux port of router and I am using USB dialup modem with my laptop to dailin to the router which is connected to a US Robotics Faxmodem. Then I have accessed my USB dialup modem throught HyperTerminal and I can issue all "at" commands and to dialin to the modem I have used the following command atdt914011111111 (atdt followed by country code, area code and landline number)Once I issue the above command it give me message "Connected" and after this I just get a flashing cursor. I cannot do anything nor will it display a username login prompt.
View 1 Replies
View Related
Feb 8, 2011
I moved to a remote area where I cannot get DSL or Broadband. I can however get Dial up, like earthlink and Netzero. Before I signup for one of these services, I would like to know if there is any way to make my dialup a wireless conection for my laptops. I like to move around using the computer, I hate being at a desk having to sit there and not be able to move where I want.I have a modem that I used for my old dsl connection. Will this work?
View 1 Replies
View Related
Oct 28, 2011
I have a dlink DWA130 wireless N adapter connected and working. But AOL Dialup takes over. When disconnecting the phone line for AOL, there is no internet connection. The adapter is connected and has great signal strength. What can I do to make the wireless adapter work independently from AOL dialup?
View 3 Replies
View Related
Nov 9, 2012
I've moved a Cisco 887 router from a site where it was used to dial up on an ADSL line to a new site where we have a EFM circuit which terminates at a Cisco 1841 router managed by our ISP. I therefore need to re-configure our 887 router to work as a conduit from our servers back to the Cisco 1841 as its gateway.
I have asked from our ISP and they told me that i need to configure the 887 to use IP address 176.35.140.65 255.255.255.248 and its gateway should be 176.35.140.70. That's great advice in theory but I don't know how to configure this correctly
Our internal network is using subnet 192.168.42.XX which will need to be retained for local devices.
View 7 Replies
View Related
Jun 1, 2011
I have been trying to share my dial-up connection from my vista to other system in my ad-hoc network but I always get error code 1061 saying:
Cannot enable shared access. Error 1061: The service cannot accept control messages at this time
View 2 Replies
View Related
Jul 27, 2011
i have wireless network with my laptop and have been given another computer which is not a laptop and was on wireless how do i change it to connect to my wireless network i have tried setting up a new connection but it doesnt seem to have wireless connection set up, the computer is about 8 yrs old?
View 2 Replies
View Related
Dec 31, 2011
what or where is the ethernet port
View 1 Replies
View Related
Dec 6, 2012
The servers are calibrated to allow this, however I'm not sure how to connect from my end. I have an assignment where I have to dial into both a Windows server and an Ubuntu server to conduct some tasks (the actual process of dialing into the servers is not part of the assignment). I've been given the username, password, IP address, and protocol for each server. However, I cannot figure out how to use these to "dial into" them.I am running Windows 7 on a wireless connection
View 6 Replies
View Related
Apr 18, 2012
My HP home vista keeps on disconnecting.I use dial up. The IPS service provider said to plug the computer directly into the phone jack without using the splitter which is a plug that has two openings(1 for phone and 1 for the computer in the event that the splitter is bad) I tried this and as soon as a connection is made about a minute later I'm disconnected again. Any ideas as how to resolve this problem? Also I was told that if I have DSL that this wouldn't be a problem
View 9 Replies
View Related
Dec 31, 2011
My computer is Dell Inspiron530 w/32bit vista & 2.00gb. Is this ok for DSL?
View 3 Replies
View Related
Mar 4, 2011
I have a ventilation controller that connects using a phone line. I have do not have a second phone line to dial out with my computer. is there a way i could set up dialing via broadband?
View 2 Replies
View Related
Jan 4, 2012
i have one xp machine. i wnd to configure two different dial up connection in one xp machine for band width sharing.
View 1 Replies
View Related
Dec 7, 2012
I believe that the Cisco Unified Communications Manager Express matches the outbound VoIP dial peer digit-by-digit, because:
1. when using the debug command it shows how it works digit-by-digit till it match a pattern
2. It says in the study guide ( If a match is found, the router immediately processes the call - chapter 6) so I understand its not en bloc
View 3 Replies
View Related
May 3, 2011
How i can create dial up connection i don't know to create?
View 1 Replies
View Related
Jan 10, 2013
I had a Sony Viao with Windows Vista for some years and I managed to create a bridge using the Sony Viao laptop and my o2 usb modem. That was some time ago and now I have a new laptop with Windows 7 ?I have to mention that I do not have wireless connections. I have an o2 modem and an ethernet cable. They are the only two connections that show up in my internet connections. The LAN connection has an image of a ethernet cable connection while the o2 connection has an image of a phone.whenever I watch youtube walk throughs it never looks like my set up. Ive tried everything over and over. Turning off UAC, turning on sharing but nothing has worked yet. When I just select the LAN connection and right click there is an option to Bridge. When I right click the o2 connection its not there. When I select both the option isnt there either.
View 2 Replies
View Related
Nov 12, 2011
I am without my connection until repairs are made inthe following week. I am trying to set up netzero with my current equipment, but cannot find the cd for my netgear router WNR1000.
View 1 Replies
View Related
Dec 9, 2011
Basically i need to test to see where the telephone lines are terminated, because when they where built into the walls the used standard cat5e cable to terminate it to an RJ-11 jack but over in the wiring panel it (i assume it is anyways) terminates to an RJ-45 jack but im not sure if this is really the cable for the telephone or something else, so i have a phone connected to the wall jack and a computer on this end and i would like to send a dial tone or any tone in general that the phone can pickup.
View 3 Replies
View Related
Nov 16, 2011
I's studying for my Network+ exam, and I somewhat confused when reading up on internet protocol. Is PPP only used for Dial Up connections, or also with Broadband? And what type of encryption if any does it use?
View 1 Replies
View Related
Sep 24, 2012
Had a question regarding creating dial peers through sip trunks. It will be through verizon fios so it'll be terminated through the fa0/0 port. I know to the provider i'll implement something along the lines of this:dial-peer voice 1 voipsession target ipv4:1.2.4.4sipv2port fa0/0Many of the documentation I came across really only shows pots dial-peers will a voip dial-peer work the same? Something a long of the lines of this:dial-peer voice 2 voipdesination-pattern 91[2-9]..[2-]...... no digit-stripport fa0/0
View 9 Replies
View Related
Feb 14, 2013
I have another odd issue (I get those alot) I have an asterisk box that moves around between 2 IPs, thus the dial-peers are unpredictable as to their target IP. They work as the dial-peer will eventually (after 1 min) time out and go to the other dial peer, but waiting 1 min sucks, and it's a tiny network, 5-10 sec would be WAY more than enouph. Does anyone know off hand a way to get them to time out faster?
View 5 Replies
View Related
Jul 19, 2011
Is it possible to run both LAN connection and dial-up modem for internet on the same system?
View 11 Replies
View Related
Aug 17, 2012
I use win7 os and samsung e2652 champ duos mobile. When I connect mobile to pc, the dial-up connection not established and show the error 777: the modem on the remote computer is out of order.
View 1 Replies
View Related
