D-Link DIR-655 :: Keeps Crashing Once A Day
Mar 20, 2011
I just registered the DIR-655. I saw it was on sale on Newegg for around $50 w/ a $15 promotional code. I decided to purchase that, and I have had it for the past 4 days. Firmware is Version 1.32NA. Hardware version A4.Unfortunately, it has been crashing once a day (I noticed it usually crashes between a window of 4:30pm and 6:30pm if that makes any difference). What happens is that it starts to slow down my entire net. That lasts for about 5-10 minutes before my entire net crashes to the point that I can't even access my router. I have to restart the router and cable modem afterwards..
Today, after the crash, I decided to connect my own primary computer straight to the cable modem. Internet started to work while connected straight to cable modem, but it was pretty slow. I did not run a speed-test so I don't know the exact speeds it was getting.Here's how my network is setup. Before I get to it, I want to say that it is a bit messy. I am removing one of the routers (the Ativa one). Goes like this:
Motorola SB5101 Cable Modem from Comcast in the basement
View 14 Replies
ADVERTISEMENT
Nov 10, 2011
We purchased this router 6 months ago. It has been working perfectly fine with no issues whatsoever up until two days ago when suddenly our wireless network disappeared from the available networks. We have all the updated firmware. Originally we tried setting up a new network, that worked for about 20 hours before the network crashed again. Once it had crashed that time, I was just planning to wait it out until my husband got home so he could assist me with it but before he arrived him the network mysteriously reappeared. That night it once again disappeared. The following morning it was still lost, so I reset the router to the factory settings using the button on the back, and once my computer detected it router again I once again set up a new network. That worked and my connection was fine for about 12 hours this time before it once again crashed. I brought my laptop to connect it to the internet via the cable, and after when I disconnected it to leave the room the wireless was back up again.
View 1 Replies
View Related
Feb 11, 2012
I just acquired a Kindle Fire for my wife. Joined my Dir-655 network just fine. I have never done a firmware update (using 1.10) and have lived by the "if it ain't broke. " axiom. Dell laptops, Mac laptops and desktops, Wii, X-box, LG Cinema TV, Roku, iPad, multiple iPhones and iPods all connect and work fine (with the occasional (once a month) reboot of the router necessary). Using cable modem (bridge mode), no historic issues. Suddenly when the Kindle Fire is utilizing the network at the same time as one or two other devices, the network crashes, and a power down reboot is necessary. A Google search reveals a fair number of complaints about this across router brands.
View 1 Replies
View Related
Jan 20, 2013
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP :
I have a problem with this router TL-WR1043ND (i have the latest firmware version), when i try to download torrents on wireless the wireless signal crashes after a few minutes.. in order for the wireless to work again the rooter needs a reboot.The other PC, that is connected via the cable
View 10 Replies
View Related
Jul 27, 2012
I got myself TimeWarner Cable, rated at around 15/1 mbps. The guy came and just connected the line from my place, ran it all around my room and plugged it into a Motorola SB5100 Modem. My AV is ESETNOD32 version 5.
My problem is as follows: Before yesterday, I had DSL (1mbps) and it never crashed on me. No matter what website I went to, the connection was stable. The DSL modem had wireless and it was 100% stable too. Here I have a (new?) cable modem that gives me a connection 15x faster but it crashes so often! When the guy set it up, he told me to get speedtests, so I ran on speedtest.net and speakeasy to get them. The sites loaded and my internet was fine. But today, whenever I try to get to those sites, my internet crashes immediately. Not only that, but I notice that when streaming HD on Youtube or elsewhere, the connection tends to crash sometime afterwards. Additionally, the connection may sometimes just crash randomly while I do just about anything.
[code]....
View 8 Replies
View Related
Dec 12, 2011
my internet keeps crashing and is unsecured. How do i secure it to stop others using it.
View 1 Replies
View Related
Jun 20, 2012
My router keeps crashing like it is restarting. it turns off then all the lights are beginning to turn un again after some time it repeats again and again....Last thing they did was turning down the internet speed for our Network. It worked in some time but then it begun crashing again...Then they said it was the cable in the road that could not take all the data stream... And something about and Bit error?I just dont belive the cable in the road thing because our neighbour are running 10 M/bits without a single error anytime... I am not an expert but i've found out that we are running a Sagembox or something like that. The hardware version (if that is important) is: 3DK04-02 Everybody in the house is running Win7 SP.1. If you need any more information then i will try to find them.
View 1 Replies
View Related
Aug 17, 2011
how do i start my computer from when it was purchased. it keeps crashing and it keeps showing that i am not connected even though i pay 24-99 each month
View 1 Replies
View Related
Dec 7, 2012
I have a Dell Inspiron 1720, that uses a 1300 wireless lan, that keeps crashing. Is there a fix for this, can I replace it with another wireless lan card? Whenever I first start the computer, I would get the error message saying your wireless card had stopped working.
View 4 Replies
View Related
Mar 15, 2012
I am on the internet, let's say browsing youtube, or play multiplayer games, sometimes my internet will crash and disconnect me, leaving that familiar yellow triangle with an exclamation mark. and that will stay there for about 1-5 minutes and then will reconnect me in. but sometimes it will just keep doing that repeatedly.I've tried to work it out myself, power cycling and everything but nothing seem to work.
This issue is on my laptop, and I am using wireless connectivity
-My isp is AOL (as long as I know) I live in Quebec and my broadband is from bell, well I think it's DSL or Cable, it uses the phone cable..
-My router is a linksys WRT54G and Modem is Speedstream 4200 ethernet/usb ASDL modem.
-I use AVG9, Malwarebytes. I am intending to switch anti-virus software but do not know which one is the best.
[code]...
View 19 Replies
View Related
Sep 4, 2012
We are in an organization of 80 users with 5 Sx300 series switches with the latest firmware (1.2.7.76). The network is mostly flat with all switches feeding into a Cisco ASA5505 acing as the primary gateway for Internet Access. Only our two 48 port POE switches have an additional vlan configured for the VoIP phones. We have one SG300-10MP that is powering 5 Cisco Aironet 1024N's that keeps crashing. A couple weeks ago it went down twice in one day. I updated the firmware and it did not have any hiccups unitl today. This issue has been consistent since we installed the switch in April. Originally the issue seemed to be caused by too much bonjour traffic causing a buffer overflow (we have over 100 Apple products). Since I updated the switch I have not seen any bonjour buffer overflow errors. Instead I get the following error when it crashes:
2147424534 2012-Sep-05 15:12:28 Emergency %SYSLOG-F-OSFATAL: FATAL ERROR: tExcTask: ABORT DATA exception ***** FATAL ERROR ***** SW Version : 1.2.7.76 Version Date: 19-Jul-2012 Version Time: 17:54:43 Instruction 0x18 Exception vector 0x10 Program state register 0x80000092 %SNMP-I-CDBITEMSNUM: Number of startup configur ation items loaded: 133 %LINK-W-Down: gi1 %LINK-W-Down: gi2 %LINK-W-Down: gi3 %LINK-W-Down: gi4 %LINK-W-Down: gi5 %LINK-W-Down: gi6 %LINK-W-Down: gi7 %LINK-W-Down: gi8 %LINK-W-Down: gi9 %LINK-W-Down: gi10 %LINK-I-Up: gi9 %LINK-I-Up: Vlan 1 %LINK-I-Up: gi1 %STP-W-PORTSTATUS: gi9: STP status Fo
The CPU and PoE supply are far from being overloaded.
View 15 Replies
View Related
Nov 6, 2012
I have an ISR 1921. Every now and then, it crashes saying "Possible software fault". The system LED flashes amber and only a hard reset (power on/off) will reload the ISR.
View 2 Replies
View Related
Feb 13, 2012
I have 2 x 5510's in active/standby mode, things look fine until the active one needs to be failed over and I realize the standby one is dead. I never notice as the lights on the ASA look good, I only nice as I can't telnet or console onto it, how can I debug this issue?
View 1 Replies
View Related
Oct 13, 2012
As of around a week ago, I've been experiencing a strange thing with my internet connection. I live in apartments that provide internet to everyone that lives there, and had been living here for a few months before this started happening.I now constantly have my internet crashing in the middle of browsing/gaming. I will either open up my laptop to the internet not working already, or it will work, but crash randomly while I am using it.
Trying to load a page on google chrome, it will show a message saying DNS Lookup Failed, and an icon will pop up in the right corner of my screen with a yellow (!) triangle. If I hover over it, it will say no internet access.I've followed the few steps they had on there, but none of them worked. I've never had a problem like this before, and haven't made any modifications to anything on my computer lately, so I am pretty confused as to why this is happening. I know it is something on my end, because my roommate's internet is just fine, and even used my ethernet cord on her computer, and no problems at all.
View 3 Replies
View Related
Mar 14, 2013
How do I stop the rv220w from continuously rebooting?
I have been keeping track of when it crashes and reboots and here is what has happened today:
14/03/2013 00:26 crashes and reboots
14/03/2013 07:28 crashes and reboots
14/03/2013 11:14 crashes and reboots
[Code]....
View 1 Replies
View Related
Sep 24, 2012
I have a cisco 5508 WLC that I have setup WebAuth on and trying to install the certificate on. I have generated the csr and gotten my cert from Verisign (X.509, server platform=apache). I have followed the instruction via the cisco documentation url...I found an error in uploading and find out how to encrypt mykey: url...
I am also having exactly the same issue with a certificate from Thawte. I followed the unchained guide and have tried both with and without a password in the initial step key generation step, requesting a new cert each time. As with Jeensernchew's issue there are no errors in OpenSSL but when uploading the cert to the WLC get the following error. [code] The WLC is running version 6.0.196.0. I am using OpenSSL 1.0.0 29 Mar 2010.
When I requested the cert from Thawte I was asked to specify the device type, I chose Cisco, but as all the work and conversion is being done by OpenSSL, should I have chosen differently? When I do this I can load the cert in the 5508, but the controller fails and doesn't allow that VLAN or config access to the wireless network. I am at a loss of why I can load and it not work. I have verified my hostname and password and those are good.
View 1 Replies
View Related
Nov 8, 2011
I have a problem with a ASA 5505. He is crashing multiple times during the day. I've setup a syslog server en I'd noticed that the last two log notification were:
2011-11-08 12:28:19 Local4.Debug 10.0.0.254 %ASA-7-711002: Task ran for 27016 msec, Process = Dispatch Unit, PC = 84745ce, Traceback =
2011-11-08 12:28:19 Local4.Debug 10.0.0.254 %ASA-7-711002: Task ran for 27016 msec, Process = Dispatch Unit, PC = 84745ce, Traceback = 0x084745CE 0x08474942 0x08475511 0x08475DB7 0x08475EDA 0x08508D9B 0x0850908A 0x083AB5B8 0x083A1D55 0x080655C1 0x08895A19 0x08895AD0 0x08952194 0x08978450
It's a 5505 with a 10 user inside host license, wich incidentally is more.
View 2 Replies
View Related
Mar 13, 2011
I am using a Belkin Surf wireless modem/router with this computer (Vista) no problems at all.When I boot up my HTPC (Windows 7) all is fine until it tries to connect with the Belkin Surf. Then its Blue Screen of Death and no joy. If I turn off the modem, the HTPC boots up perfectly normally. Turn the modem on and as soon as I try to recognise the home network, it crashes again.
View 2 Replies
View Related
Dec 19, 2012
no changes except switched out old steady wrt45g router cabled to different computer for a new (crazy good price) asus n66 dark knight. stable old system after clean install xpsp3 several years ago. abruptly started crashing and endless rebooting any time wusb54g attached. no antivirus active. never had linksys monitor software installed. xp had handled everything well till now. repeated attempts to re-install drivers (rt25000usb) fail. occasionally xp sees "new hardware" and occasionally it simply immediately crashes. attempted install of ?failing? usb54gv4 onto much newer W7 machine to try to test hardware w/o success. linksys AE1000 usb adapter worked on W7 machine and also installed successfully on the old steady XP machine in question.
View 3 Replies
View Related
Mar 30, 2011
I have a WRT120N router set up with WPA2 security and set to channel 11. Everything is connected via the router (one wired computer, up to a max of 5 laptops but just 2-3 on a regular basis, a wired xbox360, wireless wii and a few cell phones occasionally connect wirelessly). Everything has been working great, been getting at or very close to the 6mbps we are supposed to be getting...until the past 2 weeks. Suddenly the connection drops repeatedly throughout the night. It either shows local only or just "limited connectivity". Normally when this happens my laptop will pick the signal back up when things are normal but I am actually having to disconnect and reconnect for it to work again. It happens again in about 30 min to an hour after that. Also, our connection speeds are showing at .5 - 1.5 instead of 6. I plugged the cable modem (the 660 series sent out by sprint/embarq/century link (or whatever name they are going by today lol) into the computer directly and got 5.7mbps. I have tried power cycles of both pieces of equipment but that doesnt work.
View 3 Replies
View Related
May 1, 2012
I bought a E1200 and have it hooked up to my Comcast internet.. When I have my computer hooked up directly to the modem I get a 30mbps download speed. When I connect it to my router the download speed crashes to about .5-.75mbps.. My upload stays pretty stable at around 6-7mbps.
View 5 Replies
View Related
Dec 27, 2012
We are using Cisco ACS server Version : 5.3.0.40.6. Our tacacs appliances are crashing on AD authentication on a fairly regular basis. I have been searching Cisco.com to see whether we are on the latest version or not however I couldn't find anything lattest than what we are currently using. Are we on the latest version?
View 1 Replies
View Related
Aug 16, 2011
I have a Server 2008 server and a Synology DS1511+ Nas.The goal is to make an iSCSI connection from the Synology to the Server 2008 server. However, I am having an issue. I set this all up two weeks ago. For two weeks it was all running fine. Now, my iSCSI drive is dropping daily. And everytime I go into the iSCSI initiator and click anything, the server still allows me to do some things, but it basically locks up. I can't restart, services stop responding, etc... The only was I can break it out of that is a hard reset. Why iSCSI initiator keeps taking down my entire server to the point of hard restart? Once this is solved, I bet the iSCSI dropping daily will be solved as well. I have already talked with Synology, the log is producing nothing and they are suspicious that it has been running fine the past two weeks. Windows update is off (I manually do it during scheduled maintenance), and there is no av or firewall running, so rule those out.
View 8 Replies
View Related
Apr 12, 2013
Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
View 1 Replies
View Related
Feb 14, 2013
Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast
I just upgraded my DLink DIR655 to WDR4300. My VOIP service has worked for the last 5 years. But with WDR4300, I'm frequently experiencing dropped calls. The call will be cut off every 20 seconds or so. This is really a deal-killer.
View 7 Replies
View Related
Mar 3, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
View 1 Replies
View Related
Feb 26, 2013
when I connect my DIR-655 to the Motorola SB6141 cable modem I notice that the link speed LED on the cable modem never glows blue indicating a gigabit connection, it only glows amber indicating a lower negotiated speed. I am using a Cat6 cable between the two devices and have also tried a Cat5e cable.
When I try and force the WAN port speed to 1000Mpbs in the router interface the cable modem link speed will not light at all with no connectivity. Only resetting to Auto WAN port speed restores functionality albeit at the lower negotiated speed setting.
I'm running the DIR-655 rev B1 at 2.03NA firmware level.
I did connect the modem directly to my PC that uses an Intel Gigabit ethernet card and still had the lower connection indication (Amber) so it seems that the modem might be faulty.
View 4 Replies
View Related
Jan 30, 2013
Region : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
View 2 Replies
View Related
May 13, 2013
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
View 3 Replies
View Related
Feb 16, 2013
Region : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
View 4 Replies
View Related
Dec 27, 2012
We have a customer who has a network consisting of two ISPs, one as a primary and the other as a backup. We are trying to create a configuration that would allow the primary link to fail and the secondary link to automatically pick up traffic and begin routing .how to set something like this up. Both routers are non Cisco routers and there for HSRP is out.
View 14 Replies
View Related
Nov 20, 2011
I have a DIR-655 Rev B, in a typical cascaded config: modem > dir-555 > switches & devices, etc.One of the four dir-655 ports is connected to a cheap-o Belink Wifi router which I use as an access point (I only use this because there's one device that only supports WEP). I was debugging a WiFi issue and I pulled the plug on this Belkin just to get it out of the picture. Well, when I did that, EVERYTHING that was connected through the DIR-655 lost connection. (Well, all the wired stuff anyway- not sure about WiFi devices through the DIR-655). I noticed that the port link light for the powered-off device stayed on on the DIR-655. When I unplugged the cable from the DIR-655, everything went back to normal.
So what I'm trying to figure out now is, is this a DIR-655 issue, or is it something screwy with the Belkin? Or Both? I've got to assume that there's some inherent flaw in the DIR-655 that allows something connected to a port to screw up everything that it's hosting.
View 7 Replies
View Related
Mar 6, 2012
I'm in an issue w/ on of our ISPs. We're using an ADSL line as a secondary light load line ( 16 MBit, /w PBR in place to separate the 80 and 443 from the business-critical applications running via a SDSL link. ).
I am on a 2611 XM with IOS 12.2, mated to a D-Link 321B modem running in transparent mode. After running smoothly for weeks, for a few days now, every night some time between 2 AM and 4 AM the link would die with the dialer showing:
Virtual-Access1 is up, line protocol is down Hardware is Virtual Access interface [code]....
To my knowledge, the only option to bring it up again is to reload the box . Taking into account that the router is our DHCP server and the date gets reset to 1994, interesting effects are the outcome of resetting the box.
Well, the ISP have checked their gear and keep saying that these report a "port error" ( quite unspecific ) and blame me that I have a wrong. config in place - which is here:
interface Dialer2
description ecotel Bridge
ip address negotiated
no ip proxy-arp
[code]...
View 10 Replies
View Related
