Is there any sort of "hardening-guide" re: preventing people from hacking the DIR-825? I've done the obvious (to me) things, but I'm wondering what the risk is.I'm also interested in how good the DIR-825 is, security-wise, compared with Linksys equivalent routers.Seeming limitations on the admin password has me concerned url...
View 2 Replies
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
I can view numerous other PDF files from other websites, and even PDF files from TP-LINK, but, the User Guide for the TL-WDR3600 or the 3500 error out when opening in a web browser. If I right click and download them, they will download but then error out on opening.
I've been fighting with getting VPN connections working properly with my Dlink router. I set up virtual servers for PPTP and L2TP and could usually get the first attempt to work. Subsequent client connections would always fail.The logs display the following-Dropped GRE packet from 192.168.0.10 to 64.232.xxx.xxx as unable handle packet header. Blocked incoming GRE packet from 64.232.xxx.xxx to 76.105.xxx.xxx.What seemed to fix it was going to Firewall Settings and setting UDP Endpoint Filtering to Endpoint Independent and TCP Endpoint Filtering to Address Restricted.
View 1 Replies View RelatedWe currently have 1 PC and my laptop connected to the internet with 0 hassle. My father brought in his work computer last night and asked me if I could set it up. Only problem is I cannot for the life of me have it connect to the internet.
He has a PC with Win7, and when I search for a network it says there's no connections available. The PC is inches away from the modem. Also, our other two computers had no problem picking out the connection after a quick scan.
I started to lose hope when I ran an ethernet cable into the PC to see if I could get it to recognize the connection.
No luck. This is not a brand new computer, it's his work computer that before the move was operating just fine.
I have a 2 wire modem and when I log on to the 2 wire homepage I see the "time since last boot" is not the time I last was on the system.Also when I check the "Enable Router behind Router alert" it is sometimes unchecked when I log back onto the 2 wire homepage.
View 1 Replies View RelatedI have bought 2 white single ariel recievers for wireless xbox live and red light stays on both so cant be them so what am i doing wrong , i have had it working on a cable but not wireless
View 1 Replies View Relatedhow can we see who are connected to our wireless network and as in some types wireless key can be see or hacked, how can we stop or prevent this.
View 1 Replies View RelatedI am currently finalising my project in Uni and in the project planning section is asks if there are any ethical considerations to be made in my project. I am conducting penetration testing on a VIRTUAL network simulator (GNS3) using Metasploit toolkit. I am guessing I will need permission to download these tools onto the university network, would that count as an ethical consideration? If not, what would I say in this section? note, all of the data I am using in the project was created by myself, and there is no other human participation.
View 3 Replies View RelatedDoes the Cisco 2500 or 5500 have some sort of built in captive portal.
View 5 Replies View Relatedhow to disable certain ports - 25,53,25,138, & 445 - except internet to prevent hacking (can u explain in a way as a novice like me can understand pls)
View 1 Replies View RelatedI am creating a migration plan for our organization, Im wondering, how many domain controllers people have, how many member servers and what there used for?
View 3 Replies View RelatedIs there a guide to setup a VPN connection using this router? I've follow the setup guide provided by cisco but I'm having issues. When attempting to connect using the quick vpn client, I get error messages.
View 1 Replies View RelatedTrying to setup Three networks all with different IP ranges.I assume I can create a new VLAN and associate that VLAN with one of the four available ports.
Port 1 can have 192.168.1.1 - 254, Port 2 can have 192.168.2.1 - 254 and Port 3 can have 10.0.1.1 - 254.
But the Admin guide I just downloaded is NOT for 10.0.4.10. It shows Networking > LAN > VLAN Configuration.My screens show Networking > LAN > VLAN Membership.
So I am not sure how to make Port 2 associate with VLAN98 ( I created VLAN98 and 99 for the other two networks). There is a membership table that you can Tag or untag for each of the four ports - is that it ?
how do i stop people from picking up my netgear and using there internet free off me
View 1 Replies View Relatedif someane has a good guide for 802.1X with ACS 5.2 with Active Directory.
View 1 Replies View RelatedI am trying to configure a Cisco 1841 to allow the users to access the internet. This is my first step with ppp. All the rest of the configuration is ok but I don't know how to setup the interfaces Dialer0 and ATM0/0/0.
Need very basic configuration that I can analyze and use on my device?
the VWIC2-2MFT-T1/E1 hardware installation guide?
View 1 Replies View Related1) How do you manage your inventory of network equipment from the time you receive a product into inventory to the time you decommission it?
2) How do you make aware the people who manage your network monitoring/reporting software that a device has been added/removed from the field?
2a) How do you notify the people who manage your network monitoring/reporting software of what is to be monitored on a new device in the field? Of a new interface that has been added/removed on an existing device?
2b) How quickly do you notify for 2/2a? i.e. minutes, hours, days, etc.
3) What types of interfaces and resources do you monitor on a network device?
What would be the ideal download and upload speed for a server of more than 50 people ?
View 1 Replies View RelatedI have a dlink wbr 2310 router and i keep on getting hit offline on my xbox 360 because my parents set my router on open connection so anyone close enough to pick it up can use it and I'm trying to close the connection so they would have to know my password to use it?
View 1 Replies View RelatedI am a ADSL user and connect to internet using bridge mode that is set in my ADSL modem/router. when I open My Computer in Windows 7 I see a list of other people in my Network section as shown below. Other problem is that when I want to go to my modem web panel by entering 192.168.1.1 in my browser, I see it tries to connect to other modems and if I enter default user/pass I can log into other peoples modem! Is that my ISP fault for misconfiguration?
View 12 Replies View RelatedHow do I change my password to prevent unauthorized access by other people?
View 2 Replies View RelatedI have a laCie hard drive which we use to store all our files. There are 2 of us in the office and we would both like to be able to access the storage at the same time. Currently our laCie can only be seen on our desktop's if only one computer is connected (using either firewall and/or USB connectors).
Lastly, we also back up our files using dropbox, however when you drag and drop the files into dropbox from the desktop, the copying of the files uses the hard drive (HD) memory thereby reducing available HD space. Any way to upload folders (not individual files) onto dropbox without using any HD space?
I'm living in a house with 6 people on 2 floors, and the router isn't handling all the traffic well. I have an extra router that might be able to serve as an wireless access point, but from what I've been told that wouldn't solve anything if the problem was that the first router doesn't have the capacity for that much traffic. It's a 50+ dollar wireless N router though and fairly new (forgot the model number)
View 5 Replies View Relatedany success using the stand on a WAP4410N? I have not been able to get them to snap into place as described in the Quick Start Guide.
Seems to be an extremely crude and very poorly implemented design. They fall off and the WAP frequently falls over. I expected much better from Cisco given the price.
I have Cisco C881W-A-K9 wireless ruter that i want to configure with one SSID hiwever i am not able to achieve this . [code]
View 1 Replies View RelatedWhen I click on the pdf icons or the "User Guide" link on the E4200 product page, Firefox 5.0.1 pops open a new window, but it's blank. I can't see the pdf file. Usually, when I click on a link to a pdf, FF gives me the option of saving or opening the file.
View 1 Replies View RelatedI have a computer named server and it ip is 192.168.0.5 and a live ip xxxxxxxx which is a private ip. on this system my oracle middle wear is running.I just want that people may access my application which is running on 'server' through public ip. Is it possible. If it is. then how.=]
View 1 Replies View Relatedi wanna restrict people from downloading havy files in my office.how can i do that on my router .I use cisco linksys E3000 router.
View 2 Replies View RelatedHave a PC set up with a LINKSYS N2500 router. this is password protected for access to network I would like to monitor what one of my children is doing on the net - but they surf the net using an iPad
View 4 Replies View RelatedAny configuration guide for EHWIC-4ESW card. Also the difference in configuration between EHWIC-4ESWG and HWIC-4ESW if any?
View 1 Replies View RelatedWhere internet connection strength is shown in main screen there is a yellow triangle with a black exclamation Mark in it covering the signal strength icon. I have tried contacting my Internet provider who could not fix. They have sent a new modem but still same issue on pc. I have several games consoles and also have an iPad and iPhone and Internet is working on these however my neighbour tried to use her laptop in my house and has the same issue.
View 1 Replies View Relatedprevent someone from putting their computer on a network with a static ip that is already on the network so it does not cause a conflict. I'll try to do the short version of what happeend (ip numbers wont be accurate) has his laptop with him set to a static ip of 192.168.0.1 and connects it to our network and our file server which is also the dhcp and dns is set to that ip address. So when he connected it it basically brought down our whole network....
View 2 Replies View Related
