When I try to log-in to my D-Link DIR-835 Router using IE9, I get an 'Authentication Failed' error. FireFox & Chrome work just fine. what I need to change or fix in IE9 so it will also log-in to my router?
View 13 Replies
I have have a XPS L502X. I decided to make a clean installation based on Windows 7 Ultimate.My problem is when I instal the driver for the "Dell Wireless HSPA 5540" it fails with then warning:
"Authentication failed. The .... driver cannot be installed on this computer...."
How to install driver for this ?
I'm trying to set up my DIR-835. I keep getting "Authentication failed".
View 4 Replies View Relatedfirst one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying Code:
View 6 Replies View RelatedI upgraded the firmware per one suggestion, but no difference.I am going thru the setup wizard with ethernet cable attached. I want to use them wirelessly so I clicked wireless setup, and entered my network info. At that point I get an error message saying it failed to save settings. I know the ID and password are correct.I have tried exiting the setup wizard and accessing the camera thru the web interface. All wireless settings are correct. The camera works FINE on web browser, myDlink, and even my iPhone app as long as the ethernet cable is attached.Other wireless devices have no trouble connecting to my router. Is there some setting on the router that can be preventing the connection? I've done some trial-and-error changes, like different ports and enabling/disabling UpNp on both camera and router.Oh and almost forgot to mention.I did call tech support, which was a joke. Some foreign lady was reading off a script that told me to reset, unplug, reboot everything. Then she gave me a case# and said upgrade the firmware.
View 11 Replies View RelatedI just got a Samsung Galaxy S4. As I have always done with all of my devices that connect wirelessly, I went into the D-Link software and added my phone's MAC address to the network filter list. The security settings are WPA/WPA2. When I try to connect, the phone is able to see my Wi-Fi network, and it asks for my password, which I enter. It keeps trying to connect, but then it says an "authentication error occurred." I have checked and triple-checked the password, and it is correct. I have also checked and triple-checked the MAC address, and it is correct. I have rebooted the router and the phone several times each.
View 1 Replies View RelatedI am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
View 4 Replies View RelatedI've just purchased a second hand laptop for my Hubby and trying to gain access to the internet through my SKY wifi router. It keeps saying its within range but this error of Wireless authentication failed because of timeout!
View 5 Replies View Relatedpicking up on old thread, but same issue: authentification failed because of a timeout
*previously*! i was able to auto connect fine on this home network via wifi.the line and box recently changed, same provider, and now i'm the only one who can't connect.the SSID changed, but i've done all the usual routines, deleting and re-adding manually, etc. but nothing so far...
i *don't* think this is a case of changing gear, but i don't know enough about internet/connection/configuration to fix this. yet!
NB: when i perform the reset on the box as instructed, using the provider's setup software - i am not the account holder - for the wifi, it shows connected very briefly in the animation, and then goes off again; this is the authentification/verification failing, i conclude.
so: with what is said above, i'm wondering if my antivir is to blame, or the windows firewall settings.or malwarebytes.i'm going to study the info i've got off my system, and looking at the router via the http routine, offline, as i now have to get off the internet(...); i'll get the infos together so i can post something useful.
I realize there are a few other threads on this subject. Ive followed some of the advice and I still can not connect. I am currently connected via Ethernet cable but I cannot connect to wireless. I have removed all the stored networks. My event log states: [code]....
View 5 Replies View RelatedI got a report from a branch office which is getting trouble to authenticate users to the WLAN this is a stand alone AP which has a configuration script that we use for all our branch offices but in this case is not working. It seems to be an issue with RADIUS but if it was the case the whole company would be experiencing problems since it is a central RADIUS server.
Here is a log from the AP By the way I modified the radius server timeout to 90 sec
APIMMEXP01#
Sep 1 17:01:47.240: %DOT11-7-AUTH_FAILED: Station 0021.5c7f.1739 Authentication
failed
Sep 1 17:01:53.503: %DOT11-7-AUTH_FAILED: Station 0026.c64b.c3d6 Authentication
failed
Sep 1 17:01:58.739: %DOT11-7-AUTH_FAILED: Station 001e.65cf.9ca8 Authentication
failed
[code]....
I have a guest network and lately I have been experiencing troubles with some users.The symptom, as I create a username and password and type'em in a laptop the authentication fields in the web authentication page don't keep the data as if I didn't type anything
WLC 4402-50
Version 7.0.98.210
I'm trying to connect to ISP with PPPoE method using Cisco 861 equip. On the other side Cisco 3845 BRAS.Session fails at authentication phase. Authentication protocol chosen by routers is ms-chap-v2. Chap supported also. [code]
View 2 Replies View RelatedI have already set up a lab comprising of 1x2950-24 switch, 2x3750-24T in stack mode and 2x MS Domain Controller with AD 2008 Servers and NPS enabled (Domain level 2008). I use NPS as a Radius Server. I am trying to test the 802.1x framework in two scenarios.
1. I use as client a domain laptop with Windows XP SP3 with the embedded 802.1x MS supplicant. As authenticator use the 2950 switch and as authentication servers I use the two NPS integrated in MS DCs. Everything is working fine as I expected with basic configuration guidelines from Cisco & Microsoft.
2. I use as client a domain laptop with Windows XP SP3 with the embedded 802.1x MS supplicant (the same as before). As authenticator I use the 3750 Stack switch and as authentication servers I use the two NPS integrated in MS DCs (the same as before). I have configured the supplicant for both machine or user authentication in both scenarios. However the client never pass the authentication in the second one. I disconnect and connect the same supplicant in the 2950 switch and the authentication is completed successfully. Getting back to the 3750 stack the authentication failed and the laptop gains network access in the configured Auth-Failed Vlan. I have tried several configuration changes without success. I cannot understand why does this happen. I have made some debugs and I am sending them a long with a partial basic configuration of 3750 stack switch.
We have a C4948E switch which is generating the following logs every ten minutes:
May 28 12:44:13 UTC: %SEC_LOGIN-4-LOGIN_FAILED: Login failed [user: Username: -40.0] [Source: 0.0.0.0] [localport: 0] [Reason: Login Authentication Failed] at 12:44:13 UTC Tue May 28 2013
May 28 12:44:59 UTC: %SEC_LOGIN-4-LOGIN_FAILED: Login failed [user: ] [Source: 0.0.0.0] [localport: 0] [Reason: Login Authentication Failed] at 12:44:59 UTC Tue May 28 2013
We have a terminal server (C2901) set up with reverse ssh to all the devices including the above C4948E. Can this be the one to initiate the logins?
The IOS of both devices is as below:
C4948E - cat4500e-entservicesk9-mz.151-1.SG.bin
C2901 - c2900-universalk9-mz.SPA.152-3.T.bin
I am unable to identify what is triggering the above logs to be created.
My 7 inch netbook authenticates to a wifi network with short network key but cannot authenticate to one with a very long key. I am using Win CE 6. The encryption method is AES, the authentication method is WPA-PSK. The short password key is 9 digits consisting only of numbers and letters. The long key consists of 35 digits, with spaces, capital letters, numbers and an exclamation mark.
View 2 Replies View RelatedWe have ASA 5520 as SSL VPN concentrator so users can access internal web from outside. Our internal web also has several internet URL. What we want is when user click internet URL in our internal web, ASA forward those request to internal proxy server. I already config proxy using port 8080 and username "companyuser" and password, but always have authentication failed on ssl vpn browser. We uses forefront TMG as proxy. Username and password have right to access Internet.
View 2 Replies View Relatedwe have a ACS server V4 installed on W2003 server ,when we make a telnet to an equipement on the wan the authentication pass on the first connexion ,but when we telent to a switch on the lan the first connxion fails and we need to retry to login .when i check the field attempt log on the ACS i dont find the field attempt.i find this issue in ALL switch on the LAN ,from the switch i can ping the the ACS server .this problem appear frequently?
View 1 Replies View RelatedI have a little problem with my ASA 5510 version 8.2(1) with a IAS server RADIUS for strong authentication.
I have configured a double authentication for my client to access SSL portal:
First authentication: AD serverSecondary authentication: IAS for my token SAFENET ALADDIN The server IAS is declared on a W2K3 and it's standard.
The problem I have is that after more than 24hours of unutilization, when i try to log in, my authentication failed the first time and then the other tries work fine as long as I use it in a period of 24hours.
I first thought about the timeout so i tried to put a "timeout" of 15seconds for AD and IAS servers and a "retry intervall" of 3 seconds, it doesn't change much.
Is there a tool/option in the ASA to check connectivity with the radius every 1h for example.
Having an issue where a user will plug a PC into a switch. The switch does a MAB authenticaiton and the MAC is not located in the ACS server. It logs the failed attempt, but when the PC is removed from the switch, the failed attempts keep getting logged until the port is bounced. Any way to keep the attemps from happening after the PC is removed? If not, any way to make it stop without bouncing the port?
running ACS version 5.2.0.26
switch port config:
interface GigabitEthernet1/0/2
sw access vlan 2 sw mode access
authentication control-direction in
authenticaion host-mode multi-auth
authentication port-control auto
mab
spanning-tree portfast
I have configured Radius authentication on Windows 2008 server (NPS) The following configuration is working perfectly on Cisco Switch 3560. [code]But, the same configuration is not working on Cisco Catlyst Switch 6509 (C3560-IPBASEK9-M), Version 12.2(46)SE, RELEASE SOFTWARE (fc2)/
View 2 Replies View RelatedWhile the home PC and my brother's laptop can connect to the wireless internet, my sister's laptop has never been able to. The antivirus software installed is Avast! and there is also a Windows Defender. It can connect no problem using an ethernet cable.
View 3 Replies View RelatedI use IE7.0
192.168.1.1
user name : admin
password : admin
Error is saying "401 Authorization required" Browser not authentication-capable or authentication failed.
I've been configured my device 6506-9 with TACACS+ server authentication: [code]
but when I tried to access the device only uses authentication local but not uses TACACs (with username/password defined) it can be an error in configuration? in the other devices of network this works properly, only it's wrong in Cat6506-E
I am trying to configure a Cisco 1042 autonomous AP and have ran into some problems. I require 2 broadcasted SSIDs that use WPA v2. When I only have 1 of the SSIDs enabled, I can authenticate with no problems. When I have both SSIDs enabled, I can connect to one of the networks, but not the other. I have verified the PSK multiple times, but the logs still show dot11-7-auth_failed. If I remove the working SSID and make no changes to the SSID for which authentication previously fails, everything works fine. Upon adding the other SSID back, I run into the same authentication issue.
View 3 Replies View Related I replaced an ACS certificate that had been installed as follows:
1. Generate CSR file and private key file, then send CSR to GeoTrust (Key length: 2048 and Digest to sign with SHA1)
2. GeoTrust send me a certificate. Issued by "GeoTrust SSL CA".
3. Install the certificate on the ACS. Restart ACS service.
4. ACS Certification authority setup. Issued by "VeriSign Class 2 Public Primary Certification Authority - G3"
5. Edit certificate trust list and select "VeriSign Class 2 Public Primary Certification Authority - G3" as trusted.
6. Enable EAP-TLS, then restarted the ACS service. The problem is when i try to enable EAP i get the error msg:Failed to initialize PEAP or EAP-TLS authentication protocol because CA certificate is not installed. Install the CA certificate using "ACS Certification Authority Setup" page.I searched on cisco and it said to disable the CSA, but in fact there is no CSA installed on this server.
OS: Win 2003 sp2Cisco ACS: Release 4.2(0) Build 124
Whenever I try to goto a webpage within any browser,despite me being connected to my network(though 1 received packet to every 20 or so sent packet ratio) it tells me that DNS lookup failed. I had a similar issue on my other pc that I use more often,though connecting through WIFI momentarily resolved the issue,before I returning to wired,where everything has been fine. My other pc however has no wifi adapter. So ive been stuck.
View 12 Replies View Related In my head office we have Cisco 3845 router.in the router we put the show log command the below error is came..
What is the error??why the error came??
25024684: Feb 29 10:33:13.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024685: Feb 29 10:33:33.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024686: Feb 29 10:33:53.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024687: Feb 29 10:34:13.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
I am unable to connect to the internet on my desktop computer. The error message I receive is" Download failed(12007) The sever name or address could not be resolved" I am running windows 7. Hooked up to att uverse. My laptop is working as you can see by sending this message. I have been trying to fix this problem for the last 2 days to no avail. I uninstalled norton hoping it was a firewall problem. On the local area connection it shows IPV4 connedtivety: No Network access.
View 2 Replies View RelatedI have just gone through hours of tech support with my ISP and still cannot seem to get online. Problem is the same as recent posts by jerguy1928, with message "DNS lookup failed...." coming up in Google Chrome. Both IE and FF just say cannot connect.Running Windows 7 on laptop. I have tried alt DNS settings (Google and others), all the CMD suggestions, disabling firewalls etc, etc! Other computer in house connects just fine.Ping works fine. Really, there appears to be no reason to not be able to connect - since I am actually connected!
View 13 Replies View RelatedDHCP Client and Network Location Awareness aren't working. When I tried to start DHCP Client, I got Windows could not start the DHCP Client service on the Local Computer.Error 5: Access is denied. I checked the dependencies and all of them were on. For Network Location Awareness, I got the error Windows could not start the Network Location Awareness on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service cendor, and refer to service-specific error code -1073741288. One of its dependencies is fine, but I don't know how to check the other two, Ancillary Function Driver for Winsock and NetIO Legacy TDI Support Driver. Also, how do I check the event log?Everything on the list that was said to check is running expect these two the lisie was having problems with. I have not had anything with memory recently and have not been able to successfully go through a system restore. I have tried many of the suggestions and just am not sure what to do anymore. The computer works perfectly fine, minus it cannot get on the internet.
View 1 Replies View RelatedWhen I try to connect to our domain I get the error message:Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "(name of our domain)" The specified domain either does not exist or could not be contacted.The procedure is the same I've used since Hector was a pup and never had a problem. I can't add users to the domain and can't log on directly to the domain.
View 1 Replies View RelatedI am using URL Snooper to copy URLs from slide share into my hard drive. Although my internet connection is working fine i am getting the message"ERROR:failed to find a suitable network driver". I cannot understand what the problem is" Please assit me in this issu
View 1 Replies View Related
