I am using URL Snooper to copy URLs from slide share into my hard drive. Although my internet connection is working fine i am getting the message"ERROR:failed to find a suitable network driver". I cannot understand what the problem is" Please assit me in this issu
View 1 RepliesI have an Inspiron 1545 and I reinstalled Vista 32-bit, but I having problems with the comms driver (Conexant D400, External USB 56k Modem Rev : a05) and having the following message appear when I install the driver?
where to show MODEM?
I am having Cisco 3845 series router with c3900-universalk9-mz.SPA.151-4.M2.bin IOS . I want to install new Licence on it for DATA. When i am trying to install licence on it i am facing the error "% Error: License installation failed with error: XML parsing failed".
View 4 Replies View Relatedhow can we find the network controller driver of Toshiba satellite
View 1 Replies View RelatedThis printer is connected to our schools network...in the lab I'm in, we have different subnet and my tech computer and the lab pcs gets dhcp from router connected to same new network switch as printer. I can ping the printer and pull up menu in browser but cannot print.
View 1 Replies View RelatedWhere i find network driver for Packard bell pav80?
View 3 Replies View RelatedWell one day i went onto my gaming PC and started playing, it randomly restarted and did some random windows check while starting. Then when i finally logged on i had no internet connection, my computer didnt sense there being a cable plugged in (Wired connection. The orange light wasn't on) So i figured i should just reinstall windows anyway (Blue screens, ect) After i reinstall i have the same issues. I have moved it to a different room and still the same thing. If i can't fix it then i plan to just buy a USB wireless but i would like to see what others think what i should do before i go making hasty decisions.
The computer say "Windows could not find a driver for your network adapter" I have tried many things i have found on this forum and nothing. So maybe a link to a driver? my Router is a Linksys WRT54GL and has always worked.
By default, 802/11a/n is set for backhaul communication.Does that mean that if most of my clients are on 5ghz, Mesh network is not a preferred design to go? Reason being:- client communication on a/n radio might disturb the traffic of the whole cell and of all the MAPs that connect to the network through that MAP.
View 6 Replies View RelatedI have a Asus EeePC 701sd and upgraded to Win 7 Ultimate but I couldn't find any driver for the wireless network adapter
View 1 Replies View RelatedWhen I try to log-in to my D-Link DIR-835 Router using IE9, I get an 'Authentication Failed' error. FireFox & Chrome work just fine. what I need to change or fix in IE9 so it will also log-in to my router?
View 13 Replies View RelatedWhenever I try to goto a webpage within any browser,despite me being connected to my network(though 1 received packet to every 20 or so sent packet ratio) it tells me that DNS lookup failed. I had a similar issue on my other pc that I use more often,though connecting through WIFI momentarily resolved the issue,before I returning to wired,where everything has been fine. My other pc however has no wifi adapter. So ive been stuck.
View 12 Replies View Related In my head office we have Cisco 3845 router.in the router we put the show log command the below error is came..
What is the error??why the error came??
25024684: Feb 29 10:33:13.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024685: Feb 29 10:33:33.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024686: Feb 29 10:33:53.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
25024687: Feb 29 10:34:13.759 India: %FAN-3-FAN_FAILED: Fan 1 had a rotation error reported.
I have have a XPS L502X. I decided to make a clean installation based on Windows 7 Ultimate.My problem is when I instal the driver for the "Dell Wireless HSPA 5540" it fails with then warning:
"Authentication failed. The .... driver cannot be installed on this computer...."
How to install driver for this ?
I am unable to connect to the internet on my desktop computer. The error message I receive is" Download failed(12007) The sever name or address could not be resolved" I am running windows 7. Hooked up to att uverse. My laptop is working as you can see by sending this message. I have been trying to fix this problem for the last 2 days to no avail. I uninstalled norton hoping it was a firewall problem. On the local area connection it shows IPV4 connedtivety: No Network access.
View 2 Replies View RelatedI have just gone through hours of tech support with my ISP and still cannot seem to get online. Problem is the same as recent posts by jerguy1928, with message "DNS lookup failed...." coming up in Google Chrome. Both IE and FF just say cannot connect.Running Windows 7 on laptop. I have tried alt DNS settings (Google and others), all the CMD suggestions, disabling firewalls etc, etc! Other computer in house connects just fine.Ping works fine. Really, there appears to be no reason to not be able to connect - since I am actually connected!
View 13 Replies View RelatedDHCP Client and Network Location Awareness aren't working. When I tried to start DHCP Client, I got Windows could not start the DHCP Client service on the Local Computer.Error 5: Access is denied. I checked the dependencies and all of them were on. For Network Location Awareness, I got the error Windows could not start the Network Location Awareness on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service cendor, and refer to service-specific error code -1073741288. One of its dependencies is fine, but I don't know how to check the other two, Ancillary Function Driver for Winsock and NetIO Legacy TDI Support Driver. Also, how do I check the event log?Everything on the list that was said to check is running expect these two the lisie was having problems with. I have not had anything with memory recently and have not been able to successfully go through a system restore. I have tried many of the suggestions and just am not sure what to do anymore. The computer works perfectly fine, minus it cannot get on the internet.
View 1 Replies View RelatedWhen I try to connect to our domain I get the error message:Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "(name of our domain)" The specified domain either does not exist or could not be contacted.The procedure is the same I've used since Hector was a pup and never had a problem. I can't add users to the domain and can't log on directly to the domain.
View 1 Replies View RelatedI am running IOS version 8.0(5) in cisco ASA 5520. This issue i am facing is that when the memory utilzation reaches 49 percent, the web-vpn users are not able to login as they are getting a blank page. The only error which is getting in the output " sh mem webvpn allobjects" is ERROR: Memory allocation failed?
View 2 Replies View RelatedWhile installing ISE 3395 i am getting error failed to start DB!
Database is not available withintimeout of 240 seconds.this could be reason of incorrect network configuration or lack of resources on the appliance or VM, run the folloing CLI to re-prime database 'application reset-config ise'
I had upgraded the MSE to 7.0.202. Release code. The Upgrade along with the 4 database zips went smooth.But the MSE status shows following
View 2 Replies View RelatedGetting this error on the data center 2581 (12.4(24)T) from a GRE/IPSEC tunnel, remote branch is 2811 running 12.4(25d)
%CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac verify failed for connection id=
The tunnel has been up and working okay for months, nothing has changed on the config and the key is correct. Traffic is following but remote users are complaining of performance issues. A wireshark shows checksum errors and lots of packet resends. Remote ISP has checked the circuit and says its clean.The data centre router has quite a few tunnels but only 1 causing this issue. From the head end router -
sh crypto ips sa | b x.x.x.x
current_peer x.x.x.xport 500 PERMIT, flags={origin_is_acl,} #pkts encaps: 15129, #pkts encrypt: 15129, #pkts digest: 15129 #pkts decaps: 13346, #pkts decrypt: 13346, #pkts verify: 13346 #pkts compressed: 0, #pkts decompressed: 0 #pkts not compressed: 0, #pkts compr. failed: 0 #pkts not decompressed: 0, #pkts decompress failed: 0 #send errors 1, #recv errors 1992
Can a VPN module go bad like this? I've tried disabling the branch onboard engine and using software but it doesn't work.
So the other afternoon we had a freak power outage, my PC was on and connected to a surge protector. So once the power came back on, literally like 5 minutes later, I rebooted my PC and have had Wireless issues ever since. My PC is custom built with a Netgear WG311V3 PCI Wireless card in it. When I boot up, it tells me I am connectied to our wireless network, but no websites will load. I check for wireless networks but my PC tells me none are in range. I have had this issue before so I goto Network Connections and Disable Wireless Network Connection 2, my wireless card, and then when I goto Enable it I get this error: Connection Failed.
View 9 Replies View Relatedfirst one had to get rid of because just wouldn't work with a 3CX server, anyway, I have a DIR-655 A4 factory shipped with 1.32NA I am trying to update the firmware to 1.34NA but it will not let me. It keeps saying Code:
View 6 Replies View RelatedI upgraded the firmware per one suggestion, but no difference.I am going thru the setup wizard with ethernet cable attached. I want to use them wirelessly so I clicked wireless setup, and entered my network info. At that point I get an error message saying it failed to save settings. I know the ID and password are correct.I have tried exiting the setup wizard and accessing the camera thru the web interface. All wireless settings are correct. The camera works FINE on web browser, myDlink, and even my iPhone app as long as the ethernet cable is attached.Other wireless devices have no trouble connecting to my router. Is there some setting on the router that can be preventing the connection? I've done some trial-and-error changes, like different ports and enabling/disabling UpNp on both camera and router.Oh and almost forgot to mention.I did call tech support, which was a joke. Some foreign lady was reading off a script that told me to reset, unplug, reboot everything. Then she gave me a case# and said upgrade the firmware.
View 11 Replies View Relatedi recently dual booted to 32bit to run a video game and on my 64 bit i have 2 network drivers working 1 of them which works on my 32 bit is a DW1525 WLAN PCIe Card and that works fine on both systems. now on the 32 bit it says ethernet controller and i try to update it and it says cannot find anything.. is there a way i can just move the driver from 64bit to 32bit.. what should i do?also when on 64bit the ethernet controller name is broadcom netlink gigabit ethernet
View 2 Replies View RelatedCannot find 64 bit driver for linksys wusb54gv2
View 3 Replies View RelatedI can't find the driver and utility, the manufacturer's web page only has the driver but not the utility and the card does not work, where to find the original installation cd for windows XP for me to download.
View 1 Replies View RelatedI've been trying to set up my TP-Link WR740N router but it always give the error "Failed to Verify router settings" on the last step of the set up screen. Broadband: Globe broadband (Wired)Modem: Siemen Gigaset SE260 I'm also confused on the 2nd Set up screen, it gives the option to select Dynamic IP Static IP PPoEI've tried using the Dynamic IP and PPoE but still getting the same error message
View 1 Replies View Related[OK] webvpn
webvpn
[ERROR] anyconnect image disk0:/anyconnect-win-3.0.08057-k9.pkg 2
copying 'disk0:/anyconnect-win-3.0.08057-k9.pkg' to a temporary ramfs file failed
Trying to add the windows anyconnect to the list of usable software for clients and that error happened. What is going wrong? I assume I dont have enough RAM...
We inserted GLC-T modules and on Nexus 5548 they are showing SFP validation Failed , as per Cisco doc GLC-T is support . Since we have 28 such modules and all after inserting showing same error. please see the below details. I also try configuring speed and inserting modules but no result ..let me know whether my GLC-T module is supported on Nexus 5548
INMUMFDS1SWCORE01# show module
Mod Ports Module-Type Model Status
--- ----- -------------------------------- ---------------------- ------------
1 32 O2 32X10GE/Modular Supervisor N5K-C5548P-SUP active *
2 16 O2 16X10GE Ethernet Module N55-M16P ok
3 0 O2 Daughter Card with L3 ASIC N55-D160L3 ok
[code]
Upon checking the logs, I'm seeing a lot of these messages:
*emWeb: Oct 25 14:11:01.345: #LOG-3-Q_IND: spam_lrad.c:10136 Validation of STAT_PAYLOAD failed - AP 00:3a:98:09:4e:d0
Always the same MAC address, which I assume is a Cisco AP trying to join. The output interpreter/message decoder isn't much useful. 5508 Controller running ver 7.3.101.0.
I was trying to configure copp on one of 6500 sup-2T. Is it ok to add customized policies to the default copp "policy-default-autocopp".When I created my own customized policy using policy-map, I get following error
control-plane service-policy input policy-custom
error: failed to install policy map policy-custom
need driver for gigaset567 have no driver cannot find
View 1 Replies View Related