D-Link DWL-2100AP / Access Point Power Led Blinks Constantly?
Feb 22, 2012My Access Point Power Led blinks constantly, Lan led works normally, Wlan led never turns on.
Access Point: D-Link DWL-2100AP
ADVERTISEMENT
D-Link DAP-1522 :: How To Get Ip From Dwl 2100Ap Not By Livebox
Jan 20, 2011I have bought 1 Dlink Dwl 2100 Access Point about 1 week, it working with ( Default Gateaway 192.168.1.1) but I want connect with 2100Ap But I get Ip from my Livebox Orange.Can I get Ip From 2100Ap (Default Gateway 192.168.0.50), not by LiveBox Orange (Default Gateway 192.168.1.1).My brother live upstair (with LiveBox) I Live ground Floor and connect to Cable Utp cat5 form upstair to ground Floor. In my room I have a Switch connect to 2100Ap.
LiveBox Orange Default gateway is 192.168.1.1
Dlink dwL 2100Ap Default Gateway is 192.168.0.50
My os is windows Xp sp2
D-Link DIR-601 :: Internet LED Blinks Orange
Mar 11, 2013I have a D-LINK 601 router which has been working fine. I was told by a friend that it is not password protected. I think that I have set it up now with an adm password. The router and the DSL modem is still connected as before, but the Internet LED blinks orange.
View 1 Replies View RelatedSteps To Setup D-Link Dwl 2100ap Wireless Router?
Jun 10, 2011How to set up D link DWL 2100AP as wireless router?
View 1 Replies View RelatedD-Link DIR-655 :: Internet Status Light Blinks Very Rapidly
May 11, 2013I have an older rev a DIR-655 that has served me well. Today I finally upgraded my ISP to cable (from a slower DLS connection) to get reasonable speed/price All is working very well but unlike my old DSL modem the internet status light on the DIR-655 blinks very rapidly all the time instead of when traffic is passed.The new modem is a Motorola SB6141,I am running the latest firmware 1.35NA I went through a complete re-setup to see if that would calm the light but no dice there. (the settings arrived at were basically the same for the old Sprint modem) ,Is there something I am missing or is it time to retire the old DIR-655 for something more current.
View 5 Replies View RelatedLinksys Access Point :: No Power For WAP54G?
Dec 3, 2011My WAP54G no longer has power -- the power light does not come on. I've unplugged the unit and moved it to a variety of different outlets that I know work.
View 5 Replies View RelatedTP-Link 300Mbps Wireless :: TL-WR940N System Light Blinks All Time
Mar 25, 2013Region : Others
Model : TL-WR940N
Hardware Version : Not Clear
Firmware Version : 3.11.3 Build 100408
ISP : Telekom
the SYS light, keeps blinking is that normal?
Linksys Access Point :: No Connection On Casio DT-X5M10R When Two AP Power On
Oct 12, 2011I have a problem about no connection on casio handy terminal when two access point were power on. The devices were link with Cisco access point. for the other one i use dlink access point for the wifi function. I need to switch off dlink access point to make the connection between the device and the cisco access point.
1st access point :
Dlink DAP-1360
Default IP: 192.168.2.29
Channel:1
SSID Broadcast: Enable
2nd access point :
Cisco Aironet 1240AG
Default IP: 192.168.3.33
Channel:6
SSID Broadcast: Disable
Cisco Wireless :: 2602 -Access Point Getting Power But Not Data
Apr 21, 2013I have a problem, where we are installing a Cisco 2602 access piont, the AP is getting power as the lights are on (changing colors Green, White, Red). In the switch side the LED for the interface is blinking green only when I chosse PoE. Also I cannot see the AP in CDP neighbours.
It seems to be a physical problem but the cable is tested and showing connected for all pairs and parallal (straight) connection.
Access Point was connected directly to the same interface (I mean with a patch cable to the switch) and working
Cisco :: 5508 Losing Access Point Config After Power Loss To AP
Sep 19, 2012I know there were a few post about users losing their access point config after a power loss to the ap. I wanted to share that I can confirm and reproduce this same issue with a number of access points that I have. I opened a tac case and will update this tread as the case progresses.
Wlc 5508
Ap 1242
7.0.220.0
Cisco Routers :: SRP527W What Has Constantly Flashing Power LED
Jun 21, 2012I have a SRP527W what has a constantly flashing power LED.Is there anything that I can do to attempt to recover this router?
View 2 Replies View RelatedWifi Connection Constantly Drops When Laptop Is Operating On Battery Power?
Jun 14, 2012My computer is a Toshiba Sattelite o/s win 7. My wi fi signal is excellent, yet my signal keeps dropping or saying limited access.I have tried resetting the router and resetting my default windows settings on the computer. All other lap tops and wireless devices in the house do not have an issue.I discovered the other day as long as the laptop ( not the router) is plugged in and not running on batter power that i do not have a problem staying connected.For fun i wondered if it had something to do with the power cord making some kind of connection when plugged into the lap top, (since everything is more compact in them)I tried having the power cord plugged into the lap top but not into a power source but I still lost signal.
View 1 Replies View RelatedConnecting Tp-link Wa901nd Access Point As Repeater Without Access To Router
Oct 21, 2012I have just moved into a new apartment that has a free wifi connection the problem is that my apartment is in the basement at the completly opposite side of the office and i cant get a strong enough signal to connect to the internet and im not very good with computers. the first time i tride setting up the repeater i was able to connect everything and get online but it had changed the ssid and when i tride to change it bacck to its origanil name i lost my internet connection and have not been able to get access the internet again.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Duron(tm) processor, x86 Family 6 Model 8 Stepping 1
Processor Count: 1
RAM: 479 Mb
Graphics Card: S3 Graphics ProSavageDDR (Microsoft Corporation), 32 Mb
Hard Drives: C: Total - 24385 MB, Free - 3678 MB; D: Total - 13776 MB, Free - 13649 MB;
Motherboard: , KM266-8235
Antivirus: None
D-link Dir-615 :: Wifi Access Point - Getting No Browser Internet Access
Apr 22, 2013I've been following those instructions to set a dir-615 as a wifi access point connected to a switch : [URL]. I am now able to connect to the 615 either by wifi or by typing it's ip address with another computer connected to the LAN. Connecting to the 615 by wifi, i can do a ping request to urls or receive and send mail with my e-mail client but i can't access websites using my browser.s it possible to get it working without installing some kind of modified firmware? I tried plugging the Internet ethernet cable in the LAN and Internet ports of the 615, none works.
View 3 Replies View RelatedD-Link DIR-655 :: How To Access Setup Window When Used As Access Point
Jul 3, 2011I have have my Dir-655 set up as an access point for awhile and would like to change the wireless access code. I can't seem to figure out how to access the setup menu while it is an access point to do this. How I access the router when it is set up as an access point?
View 4 Replies View RelatedD-Link DIR-655 :: Using As Access Point From TP-Link TL-R860?
Jan 2, 2013Im trying to use my DIR 655 as an access point from my new router, which is a TP-Link TL-R860. I've read about every post and blog I can find about this and still cant get it to work. Currently I have a cable running from the TP main router to LAN port 1 on the 655. I then plugged my computer in to LAN port 2 to configure the router.
View 14 Replies View RelatedD-Link DIR-655 :: How Can It Be Used As Access Point
Jun 12, 2011I changed the router IP of 192.168.1.1 to 192.168.1.2, and disabled the DHCP. But I cannot access the DIR655 at the above new address by a browser. Note that the existing router's IP is 192.168.1.1 which the DIR655 is going to be cascaded with.
View 6 Replies View RelatedD-Link DIR-655 :: Use Only As An Access Point
Mar 23, 2011Using dir655 model for access point alone? I want to take the routing part out of this device since it is not needed at this point.
View 3 Replies View RelatedCisco Wireless :: 3502p - Access Point Support MESH And Point-to-Point Bridging?
Apr 16, 2013I need to know if 3502p with outdoor antennas supports Point-to-Point Wireless Bridging?
View 6 Replies View RelatedWireless :: How To Link Access Point
Feb 2, 2012Currently have a sbs2003 with 2 nics want to install a wireless access point for the internal network. the wireless router is on the external wan how do i link the access point to this?
View 1 Replies View RelatedD-Link DIR-655 :: Set Router As Access Point?
Apr 24, 2012I want to set D-Link DIR 655 as Access Point. For your information , I'm using D-Link 2750U (modem + router) as primary wireless router. how do I set D-Link DIR 655 as Access Point ?
View 5 Replies View RelatedD-Link DIR-655 :: Set As Access Point Or Bridge?
May 8, 2011I like the ease and price of the 655 as well as the range and speed. I was wondering if you can use them as a bridge to connect another building or just add a second as an access point? It does not seem straightforward from the control panel.
View 14 Replies View RelatedD-Link DIR-601 :: Using It As Access Point For Xbox 360
Jan 7, 2012I've moved into a new apartment with a couple of people who already have wifi set up. They are adament about me not running a ethernet cable across the apartment to my room for my xbox 360. I have a DIR-601 from my last apartment, and I am wondering if there is a way to set up the router as an access point that allows me to connect to the existing wifi network and then wire my xbox 360 in.
View 4 Replies View RelatedD-Link DIR-655 :: Optimizing As Access Point?
Nov 14, 2011I just moved into a new appartment and my buddy next door and I are sharing a connexion using a 2wire router (comes with the internet connexion by the company, with their own firmware).
Now, since the 2wire router signal doesn't perform well, I set up my DIR-655 as an Access point.
Now I would like to know what are the optimal settings for a better signal, and also speed. I rather have stability by wifi g/n mixed (maybe will go n only soon).
Some extra questions;
- Should I deactivate the firewall on my DIR655 to gain speed? I imagine it isn't really usefull since there is already another main router.
- Should I check or uncheck "Short GI", "WMM Enable" and "Extra Wireless Protection"?
- Should I activate or deactivate QoS engine and WISH since it is an acess point to gain speed?
- The firmware on the DIR655 is actualy 1.21, is their a newer and stable firmware I should upgrade to?
D-Link DIR-655 :: Use Old Router As An Access Point?
May 28, 2011I have a D-Link DIR-655 with an usb dongle DWA-140. I used to work with a Sitecom WL-341 router.I want to use the Sitecom WL-341 as an acces point to improve my wireless range at the top floors of my house.
What I want to create:
- The modem connects to the D-Link router;
- The D-Link router makes a wireless connection with the Sitecom router;
- The Sitecom router is now an acces point;
- I connect the Sitecom router with a cable or wireless to my desktop PC.
I don't want a cable in my house that connects the D-Link with the Sitecom. If I do this, not only will people get hurt getting up the stairs because of the cable lying there, it also isn't a pretty sight...
D-Link DIR-615 :: Useable As Access Point?
Nov 18, 2012I want to use my DIR-615 as an access point. But i dont find the button "activate as access point". This button is shown in this Dlink DIR-300 manual url....Is this for spezial hardware only?
View 1 Replies View RelatedD-Link DIR-655 - Set Up Wireless Access Point?
Jun 11, 2011So, in an attempt to improve my signal in my house I relocated my router upstairs from downstairs by running a long cable to the modem downstairs, since I have read that the signal travels more efficiently down than up apparently. That has not been the case. Now, I have two routers. A D-link DIR-655 and a Netgear router provided by Comcast which is a WNR-1000v2.
possible to set one of these routers up as a wireless access point? Have a router upstairs be the access point, and have a router downstairs connected to the modem. This sounds like this may be a solution but let me know if I'm completely wrong. In my mind, what I'm after is more of a range extender or a repeater but at this point I don't know the difference anymore. It's been quite stressful dealing with my old man for the past week because he can't use his iPad.
Cisco Wireless :: Point To Point Access Point 1262 Bridging
Feb 27, 2013How would I bridge a wireless connection with a distance of 400 feet? Would twoAP1262N-A-K9 be able to make this happen? Or is there another wireless bridge that you all can think of?I would be connecting one AP1262 of off a 3750g switch and at the far end (400 ft aproximately) another AP1262N-A-K9.
View 12 Replies View RelatedD-Link DIR-601 :: Remote Connect Through Access Point?
Oct 8, 2011I have set up an access point as per the instructions I found on this site. It works perfectly, holds a wireless signal fine. Now, I have the challenge of trying to remote connect to the home computer that is connected to this access point. I have absolutely no clue as to what changes in settings have to be made.
View 4 Replies View RelatedD-Link DIR-655 :: Using Router As Pure Access Point?
Apr 4, 2012I have a DIR 655 which I am trying to use as a pure access point for a network based on a Comcast SMC Modem/Router On the DIR 655 I have the DHCP turned off and on the Internet Connection I have given the DIR 655 a static address of 10.1.10.2 with Gateway and Primary DNs 10.1.10.1 (The SMC is 10.1.10.1) I have the DIR 655 connect to the SMC Lan to Lan. DIR 655 is G only to deal with and IPAD issue....
The wireless devices get an internet connection BUT... I can only contact the DIR 655 wirelessly the SMC does not show the DIR 655 as connected I can not ping the DIR-655 from the SMC. I can " see" the static addresses I have given to two network cameras but they don't not respond to Port Forwarding I have assigned at the SMC (that is more for info as I realize that might be a SMC issue) . How to make the DLIK visable to the wired network.
D-Link DIR-655 :: Configuring It As Secondary Access Point?
Sep 15, 2009I have a DLG-4500 router as my primary router and want to connect a second router (DIR-655) to it as an extention of the LAN to the second floor of my home. I have found instructions on doing this with most other routers, but not DLINK. In fact when doing the initial configuration and trying to disable the WAN link on the second router by using a bogus IP address string (127.0.0.1) The router won't let me save the change? What are the steps for configuring a secondary router cascaded to the primary (both wireless) to extend network coverage.
View 13 Replies View RelatedD-Link DIR-615 :: New Wireless Router / Access Point
Nov 5, 2012A friend of mine has a network with the following setup: D-Link DSL-2500U for ADSL, connected straight into a Telkom DG834GUv5 (locally rebadged Netgear) which has 2 PCs connected via cable, and 2 laptops via Wireless. A cable runs from the Telkom into a standard IPLink switch, which merely extends a cable into a D-Link DIR-615 running DD-WRT that has 2 computers connected, and shares wireless to a couple laptops.
At the moment the network is somewhat unstable, and recently the Telkom router has been giving serious problems, even after resetting to default. I want to try make the network a bit simpler and more stable. Firstly, I want to remove the IPLink switch, which merely extends the cable. Is an Ethernet Coupler what I need? Both cables are definitely under 100m combined (probably under 50m).
Now the big thing is a replacement for the Telkom (rebadged NetGear). Should I get another D-Link DIR-615 or is there a better solution? Their budget is between $40 and $60 US. Is it best to stick to the same brand, considering both devices are D-Link at present?
D-Link DIR-655 :: Access Point With Guest Zone
Mar 23, 2010I recently picked up a 655 with hardware version A2 and flashed to the latest firmware. I have a HotBrick router. I only want to use the 655 as an access point AND especially to use the Guest Access or Guest Zone feature to allow visitors to bring their laptops and not virus up my network. My home network is open among a few computers for things like SageTV, file serving, etc.I can get the 655 to function just fine as a standard access point by following the instructions to turn off UPNP, DHCP, etc. as outlined in the manual. I then enable the Guest Access/Zone feature, and of course give it a different SSID name, make sure it's on 24 hours a day, that it is enabled, etc.
But, none of my computers can access the internet via the Guest Account feature, just the regular wireless portion. They show connecting to the Guest Account name, etc. but no internet. I've disabled every security feature I know of to test this. Again, the "regular" WAP tests great, but no Guest Account, which is really important and one of the main reasons I bought the unit.I'm wondering - does the Guest Account feature only work if the 655 is the main router, has DHCP enabled, etc.? Does it have to be the one and only router? If so, I'm in trouble, because I can't really give up my HotBrick due to failover features, etc.