Am facing problem with dhcp.Edimax router is not leasing ip to windows xp and its showing as 169.x.x.x ip..i was actually using straight through cable and it worked for 1 day..after that i tried changing to cross over cable.so after that it worked for 2 weeks..then again its not getting ip from router?
View 2 RepliesI just built this desktop and everything seems to be working well accept the connection I want saved on my computer. Every time I turn my computer on I have to select the conection manually and enter the WEP key.
-I am using Windows 7
-My wifi card is a USB EDIMAX
Cannot setup NAT on edimax router
[URL]
It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.
I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router
So I have recently bought a modem which has Wi-Fi in it..I use every holidays! When I bought the modem, I set the modem correctly by putting its CD in my PC & following it..But the last week when I opened the internet, the internet was telling that DNS server failed to look-up.. or something like that in my Google Chrome.So I put the disk in my PC.. And again I set the modem correctly by following CD's instructions..Then the internet started to work again..Now today also when I opened the internet the same manner it shows a message.. set the modem again..So my question is why is this happening ??And yea also the Wi-Fi's password setting has been also changing from WPA to Open..Is there a way to set this modem correctly.. without being setting the modem everytime.
View 1 Replies View RelatedI need some brilliant mind regarding my Edimax router. After I install my edimax router my win7 pc connects to the internet however my 2nd computer which is running winxpSP3 is not able to connect. I interchange the utp cable but problem still persist. When my winxp pc is connected directly to the modem internet connection is absolutely good.
View 1 Replies View Relatedi have edimax AR-7084gA router, wired to computer and printer and, working wireless to laptop.I want to connect, wireless, to other devices. but cannot remember password.
View 2 Replies View RelatedI'm having a problem with my aforementioned Edimax, I just can't seem to login to my router homepage, this happened after I reset it, the leds are indicating that the internet is being received etc it just won't let my PCs connect to it because I have to login to the config to reset it.
View 2 Replies View RelatedI have an Edimax BR-6228nS and I set it up as an access point a while ago. I also changed a lot of settings on there and even turned off the DHCP. I need to use it as a router now so I am trying to get into the configure page. After resetting the router, the IP address is still the not the default one. I still can't access it. When I type in ipconfig in the command prompt all it shows is the ip address that connects to my modem. This is what it shows when i type in ipconfig /all. 192.168.15.3 only directs me to my modem's set up page. This is confusing me, is the router not being recognized?
Windows IP Configuration
Host Name . . . . . . . . . . . . : --------
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
Cannot setup NAT on edimax router I ve got this setup: [URL] It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router ?
View 1 Replies View RelatedI bought myself a new Edimax Modem/router that generates a WiFi network. I installed it successfully but not all of my house is covered well by the network, I even have some 'blank spots', where there's no WiFi at all. What can I do to improve the coverage? I have no problem to buy additional equipment, as long as my entire house would be fully WiFi-covered.
View 1 Replies View RelatedWireless network is fine - both my laptops get on without a problem.The Edimax PCI-E adapter:
a) can't connect, or
b) has limited connectivity, or
c) has full connectivity but no web pages work, and the router can't be pinged, or
d) works (for a short while)
The above options are seen pretty much evenly, except for the last one which achieves disproportionately low representation.Have attempted to uninstall/reinstall drivers. Have attempted to delete all profiles. Have seriously considered ripping out the PCI-E and throwing it into the next-door neighbours garden, but fear this may damage the motherboard.
I have a new HP lap top which I have connected to the net thro my edimax 7266 routerI also have another lap top and desktop connected via this router. This other lap top I can connect either wired or wireless so the router seems to be working perfectlyThe problem is when I enable the HP laptop wireless adaptor and try to connect to the net . As soon as I do this the orange light on the router goes solid from blinking and I cannot then access the net from any of the computers either wired or wireless. I have to disable the HP wireless adaptor and reboot the router to get a connection on the computers.
View 1 Replies View RelatedI got an EDIMAX Nano BRN-6258n Router to replace my glitchy Belkin Wireless-G router about a month ago. My typical network setup involves a desktop computer wired to a router and a laptop connected wirelessly.
Anywhere from once a week to twice a day, the internet connection starts (selectively) dropping off. While I cannot browse the web, some of my browser add-ons and Skype/Dropbox are working fine, and Windows almost always indicates a perfectly working connection.
If I am streaming through YouTube or other sites, the stream continues to play after the connection loss.
For AV, I use a combo of Malwarebytes and AVG Internet Security.
I am trying to connect a wireless router (EDIMAX br-6228nc) with a ADSL router (NETGEAR). i assigned the LAN IP of the ADSL modem to 192.168.1.1, subnet mask 255.255.255.0, and enable DHCP server.then i connected a LAN port from ADSL router to the WAN port of the wireless router. i assigned IP of the WAN port of wireless router to 192.168.1.10, subnet mask to 255.255.255.0 and default gateway to 192.168.1.1 now on the LAN side of the wireless router i assigned IP 192.168.0.1 and subnet mask 255.255.255.0 enabling DHCP server.on the client pc i selected the setting of automatically assign IP setting (which it got 192.168.0.100, default gateway 192.168.0.1) but my client pc is not able to access the internet.
View 2 Replies View RelatedI have a TP-Link TL-WN723 USB WiFi adapter attached to my laptop, which runs WinXP Service Pack 3. It successfully detdcts the WiFi provided by my Edimax BR62-04Wg router, but when I try to connect, it cannot obtain an IP address and cannot connect to the network.
- The very same WiFi adapter can connect to other routers without any problem
- Any other device can connect to the very same network provided by my router without any problem
- Using the WiFi adapter with other computers does not work
Thus, it seems that the problem is somewhere between this specific router and WiFi adapter. Here is an interesting detail though:If I try connecting to my WiFi while a LAN cable from the router is plugged into my computer, the wireless connection establishes too. Even if I later unplug the LAN cable, the wireless connection continues to work. But it won't establish the connection without the cable plugged in.Here's what I've already know/tried:
- Rebooting the PC
- Re-installing the WiFi adapter's drivers
- All drivers and firmwares are the newest available
- Re-starting and reconfiguring the router
- Using the Windows client for wireless networking and the client included on the WiFi adapter's CD
- Changing the router's connection type to any available option: Access Point, Station Ad-hoc, AP Bridge WDS
None of these had any effect except for one:
- When I changed the router's connection type to Station Ad-hoc, I could connect wirelessly even without the LAN cable plugged in, and I had Internet access. However, in this case, other devices, such as smartphones could not detect the WiFi connection.
I have the e4200 and I am having trouble getting DHCP reservation to work properly with my Windows 7 machines. Perhaps there is a step that I am missing. Basically I go to the DHCP reservation setup page, select my machine and add it to the reservation table. Then I save the changes. As soon as I do this my computer goes offline. If I reboot my machine, it is still offline. I've tried the same procedure to reserve the IP address for my phone and it works fine so I wonder if the problem is with Win7.
View 6 Replies View RelatedPing goes up when I start playing games, random packet loss however if I move my computer the packets get sent again. Hardware problem or software problem?
View 14 Replies View RelatedI have been having issues with my wifi for the past one week, I earlier had a NETGEAR router which was 2 years old and keeps getting disconnected. I thought it could be a router problem and bought myself an edimax couple of days ago. This one is much worse, it keeps getting disconnected very 20 mins. I have an iMac, alienwareX51, think pad Lenovo, iPad, iPhone, ps3 and BB.
View 14 Replies View RelatedInternet cable connects to modem; modem connects to TP-Link router; router connects to XP Desktop. I have three laptops (2 w/ seven & 1 w/ XP) needing connection to router. One of the OS-7 laptops connects fine to WPA2-PSK router. My main concern is the XP laptop which has an Edimax wireless cardbus that I can't seem to configure it correctly. And I have all the information that I think I need, i.e., SSID, Network Key, Physical Address Value, IP Address, Subnet Mask, Default Gateway, DHCP Server Value, DNS Server Value, and more credentials.
View 1 Replies View Relatedi have with my Edimax router. I could not make any progress with Edimax personnel in Taipei.
If i connect my vista box directly w/o the router, i can see that port 21 (Filezilla) is open, using WhatsMyIP.org | Port Scanners/Sniffers
When I insert the Edimax br6215srg router, the port is in timeout as reported by aforementioned site (guess the port scanner gets no synack nor reset back to the syn it sends)
The router is set to "disable firewall" or to "enable firewall and DMZ enabled" with as client's ip the one that is configured in the router's dhcp table for the vista box. The NAT module is set to forward port 21 to the same ip. ipconfig confirms that i do get the ip programmed in the router's dhcp table.
I do not want to believe that this edimax box is unable to forward connections!
i have a Edimax usb adapter Ew 7612HPn which is brand new, & its not scanning any networks though the light flashes fast, i tried on both my & my dad's laptop, & same problem.Also tried different Usb cables still the same, but sometimes it worked, but mostly dosn't work.Kindly note that i am using this on my vaio Cr 354 windows vista 32 bit SP2 home premium.From day1 it was like kind of faulty, i mean it worked but kind of disconnected in between, but now it dosn't work at all just keeps flashing the blue light.
View 1 Replies View RelatedTried to connect a second Edimax AP to my home network configured as repeater. Keep getting random errors. Each of them have a different IP address
View 11 Replies View RelatedI'm trying to set up a personal ssh server on Lubuntu 13.04, but I've been having a few problems.
So far i've accomplished this:
I can connect locally, through my internal IP address, I can ping myself through my external IP address through an external internet source(Mobile phone hotspot + Different computer)I have a free dynDNS running, so that I don't have to type my external IP address.It works (if i connect to that IP locally, it forwards to my router)I set up port forwarding in my router, temporarily disabled my personal and the router's firewall too.
The problem I have is that I cannot connect through ssh from a different computer outside my network: The usual response that I get is "Error.. [etc] No route to Host".
I tried using the 'canyouseeme.org' service, and the response is the same.
I use an Internet Service Provider called iiNet, and apparently they have some per-account port blocking features, which I have also disabled from their site.I am running short on resources. DMZ does not work either, default port (22) does not work, custom port does not work either (9222, 9512 or 12222).
So I'm guessing it's either a router fault, or a fault on the ISP's customer-level firewall.
[code]....
I'm connected using a Edimax 7811-nu adapter (Default driver doesn't work, had to install a fixed one)
I'm using a BoBlite Router and the firmware version is BoBLite1500.
Have a client wanting to hand out public ip addresses to all clients from a PFSense Firewall terminating the internet connection.
How do I allow the Cisco Switches currently in place, configured with private ip addresses in the 10.10.x.x ranges and Vlans, where the main 3550 layer 3 has defined dhcp scopes for each vlan, to relay dhcp requests from all vlans to the PFSense firewall?
I assume I would take off the currently defined dhcp scopes for the vlans and configure each vlan/switch with the ip helper address and specify the PFSense firewall and that Nat would have to be disabled onthe firewall?
I use an Edimax 11n usb wireless lan utility to connect to my router. It gets 60% signal strength and 100% link quality. Either i get disconnected, limited access or no internet access statuses every other hour or not at all. Its intermittent which makes it impossible to explain to the internet provider. The main error that comes up when windows diagnoses is "DNS connection error". Now the internet provider has shown me how to manually set the router to use specific DNS's and that still did nothing.
View 9 Replies View Relatedi want to setup DHCP using my windows xp
View 1 Replies View RelatedMy Windows xp computer can't connect to the DHCP server correctly and thus can't connect to the internet. It is connected through an Ethernet cable to a wireless router. All other computers on the same network connect fine to the router, both wired and wireless.This all started after I left my computer alone for a few hours and came back with it not coming out of idle. After shutting it off and turning it back on, it would not connect to the DHCP server.It assigned me the autoconfig address 169.254.189.73 because it couldn't connect to the DHCP server. I even tried a static IP but even that wouldn't fix it. I have tried the same ethernet cable in another computer and it worked fine so I know that it is because of my computer.I have tried renewing and releasing the connection using ipconfig in the command prompt but that did nothing. The settings are all the same as the other computers running through the same router. I have tried shutting down all the other computers and reconnecting the trouble one but again still nothing.The last thing I'm not sure about is the network adapter driver. I have reinstalled it but I'm not sure if the driver is correct. I have an NVIDEA nforce 10/100 Mbps Ethernet adapter. I attempted to reinstall but I'm not sure I selected the correct generation when I downloaded the driver installer. My computer says nothing about the generation of the adapter so I just chose the newest generation. My adapter is integrated in the motherboard.
View 19 Replies View RelatedI have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. THE SETUP: As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. Pretty simple.THE QUESTION: How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address. WHAT I'VE TRIED: I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good.
View 2 Replies View RelatedI'm totally new to using Windows Server 2003 (or any windows server edition) but I do have a basic understand of networking. I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address.
I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good. I guess what I'm basically looking for is a screen like this (I hope you're familiar with the configuration pages of Linksys Routers) url...
I've just discovered this thing in Windows Event log. The DHCP-Client log is full with this: the client received a NAK from the DHCP Server. Strangely, they still get the desired IP address. (Which are reserved adresses for the MAC adresses.)So I've looked at the logs in the DIR-615 (rev.D, FW: 4.13), and found this:
View 1 Replies View RelatedI have internet over LAN with Motorola SB5102 broadband modem. Is it possible to share this internet on Edimax EW-7416APn V2 access point?
View 1 Replies View RelatedInternet Connection Sharing. On one of my pc's with Win 7 I try to use ICS and it does not work. I have tried forcing the ip address on the LAN connection on the host computer (192.168.0.1 or something) and it will not assign an IP address to any device hooked up to it.On my macbook running Win 7 and all the settings the same, all of the same devices work fine. I tried using a cross-over cable and switch (not at the same time) with no luck. Not using any firewall and I've tried for days.
View 1 Replies View RelatedI want to set up a domain for a file server and MS SQL 2005 server on my server machine and installed windows server 2008 in it.
Do I need to set up DHCP server and DNS on Windows server 2008R2 or leave them to the router to do the job?