Edimax 11n USB Wireless LAN - No Internet Access / DNS Connection Error
Dec 29, 2012
I use an Edimax 11n usb wireless lan utility to connect to my router. It gets 60% signal strength and 100% link quality. Either i get disconnected, limited access or no internet access statuses every other hour or not at all. Its intermittent which makes it impossible to explain to the internet provider. The main error that comes up when windows diagnoses is "DNS connection error". Now the internet provider has shown me how to manually set the router to use specific DNS's and that still did nothing.
View 9 Replies
ADVERTISEMENT
May 17, 2011
I need some brilliant mind regarding my Edimax router. After I install my edimax router my win7 pc connects to the internet however my 2nd computer which is running winxpSP3 is not able to connect. I interchange the utp cable but problem still persist. When my winxp pc is connected directly to the modem internet connection is absolutely good.
View 1 Replies
View Related
Apr 18, 2012
Tried to connect a second Edimax AP to my home network configured as repeater. Keep getting random errors. Each of them have a different IP address
View 11 Replies
View Related
Feb 12, 2011
Internet cable connects to modem; modem connects to TP-Link router; router connects to XP Desktop. I have three laptops (2 w/ seven & 1 w/ XP) needing connection to router. One of the OS-7 laptops connects fine to WPA2-PSK router. My main concern is the XP laptop which has an Edimax wireless cardbus that I can't seem to configure it correctly. And I have all the information that I think I need, i.e., SSID, Network Key, Physical Address Value, IP Address, Subnet Mask, Default Gateway, DHCP Server Value, DNS Server Value, and more credentials.
View 1 Replies
View Related
May 15, 2012
I just built this desktop and everything seems to be working well accept the connection I want saved on my computer. Every time I turn my computer on I have to select the conection manually and enter the WEP key.
-I am using Windows 7
-My wifi card is a USB EDIMAX
View 4 Replies
View Related
Dec 16, 2012
I got an EDIMAX Nano BRN-6258n Router to replace my glitchy Belkin Wireless-G router about a month ago. My typical network setup involves a desktop computer wired to a router and a laptop connected wirelessly.
Anywhere from once a week to twice a day, the internet connection starts (selectively) dropping off. While I cannot browse the web, some of my browser add-ons and Skype/Dropbox are working fine, and Windows almost always indicates a perfectly working connection.
If I am streaming through YouTube or other sites, the stream continues to play after the connection loss.
For AV, I use a combo of Malwarebytes and AVG Internet Security.
View 2 Replies
View Related
Jan 22, 2012
I upgraded my old Linksys wrt54g to the E1500. All the XP os are connected via cable and wireless connection, but the Vista laptop i get local access only connection error. This laptop used to connect on the older router using wep but with E1500 wpa-2 it cannot connect. I am unable to ping the router from the laptop wireless. Connecting ethernet cable it works fine and logging in as a guest works does too.
View 1 Replies
View Related
Aug 25, 2012
I have internet over LAN with Motorola SB5102 broadband modem. Is it possible to share this internet on Edimax EW-7416APn V2 access point?
View 1 Replies
View Related
Nov 11, 2011
I have Comcast cable internet and a wireless router. It has been working fine for months. Today, I can connect to the network but it says "No Internet connection." I have tried restarting the modem, router, and my computer. The strange thing is that the connection lights on the modem and router are lit as usual. Right now the router "internet" light is showing some kind of activity.
View 9 Replies
View Related
Apr 21, 2011
what should i do i have no internet connection at all but just under time warner cable, im running a laptop with windows 7 .i had try everything but no luck im thinking it maybe incompatibility with the modem/router
View 3 Replies
View Related
Feb 19, 2011
I am able to connect to firefox internet but when I try to log in to my Yahoo Messenger or iTunes store it tells me that my internet connection timed out. I try to connect to Internet Explorer and it will not connect to the web there. I have went into the tools box in Internet Explorer and clicked on internet option and than connection and I was going to try to change the proxy server LAN and when I would go into it to change that I would be able to find the address to put in but can not figure out what the port section is. I am using a wireless connection and it shows that i have connection even when I try the troubleshooting section that checks the connection and it tells me that there is no problem with it. I also tried restarting my wireless router and than restarting my computer which did not work.
Than I tried disconnecting and reconnecting to internet and still nothing. When I would login to my Yahoo Messenger and pushed the troubleshooter bottom it says, "We are not able to make a connection to the Internet. One of the following may be true: You're not connection to the Internet. Check cables, modems, routers, etc; Your Windows Internet options including the Windows Firewall settings are incorrect.; There is a problem with your Windows network settings, for example, the DNS settings in your Internet Protocol (IP) settings are incorrect or the DNS server is specified incorrectly or is not responding.; For more information, check the Windows online help and search for terms like "DNS" or "Firewall."
Checking virtual IP servers...
[VIP Raw] Resolving host name 944.452.2.1... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12007' ***
[VIP Raw] Resolving host name 944.452.2.1... [FAILED]
*** 'COMPONENT_TYPE_WININET' value: '12007' ***
[code]....
View 4 Replies
View Related
Aug 7, 2012
I use my phone as a modem with PdaNet for my computer to have an internet connection. I play Xbox Live with it all the time, but recently when I try to share the connection, it says Error 765 : Cannot Enable Shared Access".
View 2 Replies
View Related
Apr 22, 2013
I am currently on Time Warner Cable 10 mbps packge, and am using their wireless DOCIS3 modem/router. It is connected in my bedroom to the main computer. That computer stays connected. However, throughout the rest of the house (we have a two story townhome) it will drop completely or give limited connection...constantly. Sometimes I can have my laptop next to me and it will go out or give limited connection. The connection speed never drops, it just goes completely to no connection. Not for sure what is going on, if its on my end or time warner. Has been doing this for quite some time, the cable company comes out and changes the modem, but that's it, couple days later, goes back to doing it again.
View 8 Replies
View Related
Mar 14, 2011
I m facing Internet sharing problem in windows 7, when I m creating wireless adhoc network, so that on other(wi-fi enabled) system, I can use internet, At that time error like' Windows could not setup internet connection sharing' appears...
& after pressing ok... when I m doing it mannually( By going to the Properties of local area network-> then in Sharing tab option ] when I m selecting checkbox for internet sharing at that time error comes like' An error comes while internet connection sharing was being enabled The dep[endency service/group failed to start '
View 2 Replies
View Related
Oct 4, 2011
For some odd reason, my playstation portable system will not allow me to access the wifi signal anywhere there is one available. The problem seems to be that the dns code is not correct. I need a COMPLETE & relatively EASY "walk-through" to fix this problem.
View 3 Replies
View Related
May 26, 2012
I am getting this message on my laptop for cable modem hookup as well as for my wireless saying unidentified network no internet?
View 15 Replies
View Related
Jul 27, 2012
I've had my DIR 615 router for quite some time. The hardware version is C1, firmware 3.01 originally. It's been fine for the most part (asides from connection issues now and then with the internet - which we rectified by unplugging modem and/or router). A couple nights ago we had a storm and the next morning the router would not connect to the internet. I tried unplugging the router and modem a number of times but could never establish a connection. The internet globe LED was originally orange but after I cut off the power, it never came back on. I tried a number of different cables between the modem and router and could not fix the issue. I bypassed the router totally and the internet works fine. After a lot of failed attempts, I decided to reset the router and reinstall it with the disc. I followed the instructions and kept getting error 322 that the router could not be found. I tried 3 different computers and 5 different wires to fix the problem but to no avail. I kept encountering the same error on each computer. Since the router can't be seen, I must bypass it totally to get any internet access so trying the online setup doesn't work because I can't connect to the router and then to the modem since there is no internet access. So now I'm stuck. I'm not sure if my router is damaged from the storm. All other lights work (LAN and wireless icon) but I can't get any internet access through the router. I'm not sure if I should just go buy another router or not. The installation checks out fine until connecting power to the router and then it can't be found.
I am running windows 7 and vista on different computers and laptops and used setup 4.1.7141.2
View 1 Replies
View Related
Mar 16, 2012
I cannot connect to the internet. After running troubleshooting i receive and error message."Local area connection 2" doesn't have a valid ip configuration.
[code]...
View 4 Replies
View Related
Jan 16, 2012
wireless internet connection connected no bit it says no internet access what is the problem
View 1 Replies
View Related
Nov 1, 2011
When I connect to my home network, I get 'No Internet access.' I am running windows 7 on a Toshiba Satellite laptop. I should also mention that my Xbox 360 won't connect either, but both of my friend's laptops as well as my phone do connect to our internet. Also, using my phone as a wifi hotspot works intermittently.
When I do ipconfig /release it says the following:
An error occurred while releasing interface Wireless Network Connection : An address has not yet been associated with the network endpoint.
No operation can be performed on Local Area Connection while it has its media disconnected.When I do ipconfig /renew I get:
An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out. No operation can be performed on Local Area Connection while it has its media disconnected.
Ipconfig /all gives me:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Siggy-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
View 1 Replies
View Related
Nov 24, 2011
My windows 7 computer was connected to my home's wireless network yesterday perfectly normally. I drove last night to my mother's house and proceeded to connect to her own wifi router wirelessly. Although my sister's computer that's on windows 7 connects ably, and both our iPhones connect, my computer will not. My computer finds the network( it is unsecured without a password if that makes a difference ) connects, receives an ipv4 address in ipconfig, yet does not obtain Internet access. It labels the network as an "unidentified network".
View 2 Replies
View Related
Jul 29, 2012
I recently bought an RVS4000, and unfortunately forget the "if it ain't broke, don't fix it" rule, and flashed it to the latest firmware (2.0.2.7). Subsequent to doing that, it has been inconveniently dropping the connection to my ISP and completely locking itself up to a point where a manual reboot is required, usually about 4 hours after any outgoing activity (which usually means 11pm!).
Goggling my way round seems to suggest that this could be a firmware problem. The accepted wisdom is that I need to use the RVS4000 Upgrade Utility to get back to a lower version, so I have downloaded and installed V1.3 from the RVS4000 support area. However, though I think I followed the instructions (including trying setting the host PC to a fixed IP address, which was not supposed to be necessary), but I am consistently getting a "Broadcast Error" message, which I am guessing means that the utility and the RVS4000 aren't talking.
View 3 Replies
View Related
Sep 22, 2012
I rebooted my modem and now I have not internet access on my wireless connection. The internet works fine on my 3 computers I have connected to cables and my wireless devises have a good wifi signal, but no internet access.
View 3 Replies
View Related
Oct 16, 2011
laptop with window vista/home edition.Cannot access wireless internet connection (WIFI) from laptop. Installed Netgear G-router onto desktop.
View 19 Replies
View Related
Nov 14, 2012
I have an Asus Windows 7 laptop with an Atheros AR9285 Wireless Network Adapter. I am trying to access a student communal network (IT support is sadly none-existent) which means I cannot perform tests on the router, but can confirm that my girlfriend can connect with a Macbook in the same room as me, and that other Windows users can too in other areas. I can connect via ethernet into the wall (although not 100% sure this is the exactly the same network) and I can connect to other unrelated wireless networks with no problem. Up until a couple of days ago I was able to connect, but have not done any windows updates that might have changed my settings. When attempting to connect my computer tells me (often, not always) I have "Internet access" under "IPv4 Connectivity", but the browser does nothing (or, sometimes, will struggle and load one webpage, only to fade into uselessness again immediately afterwards - very much a tease of a connection).
1) Disabled various firewalls/antivirus [Microsoft Security Essentials, Windows Firewall, AVG] (perhaps worth saying I have never had Nortons, McAfee or any other anti-virus installed on this laptop)
2) Reset Network Adaptor using Windows Diagnostics Tool.
3) Updated the driver by searching automatically for drivers in Device Manager.
4) Removed and Renewed the Network in "manage wireless network".
5) In Wireless Connection Properties > Internet Protocol Version 4 (TCP/IPv4) made sure both Ip address and DNS address are set to "obtain automatically" [nb: Internet Protocol Version 6 has the same settings)
6) WIthout remotely understanding what I am doing have typed the following into CMD in this order: ipconfig/release,ipconfig/flushdns, ipconfig/renew [for the latter this message is given "An error occurred while renewing interface Wireless Network Connection: unable to contact your DHCP server. Request has timed out."Beyond that, I'm basically out of ideas. Something is clearly not quite right, and yet I can connect wireless to other networks (my mobile phone on 3g emitting a dodgy wireless signal no less).
Here is the ipconfig/all information [being security conscious and ignorant, I have blanked out the ip, and the final bits of the physical address, as well as the connection specific DNS suffix]
Windows IP Configuration
Host Name . . . . . . . . . . . . : XXX
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code]....
If I ping [URL] it either says [currently unable to recreate this] "Unable to reach destination server" for all attempts, or, as currently "ping request could not find host [URL] I notice that it says in Ipconfig/all that DCHP is not enabled. I am sure this was not the case before, when the problem did not exist. When I connect to other wifi networks DCHP is enabled. I have double-checked wireless properties are set to obtain IP address and DNS address automatically. They are at all times (and I have rebooted) - no change to ipconfig/all.
View 14 Replies
View Related
Apr 20, 2011
Basically both the wireless connection and LAN connection in my house were working fine until a couple of days ago. I got one of those viruses that redirects all the links that you go on to random websites on the main PC. I ran a full scan with McAfee Antivirus Plus and it came up with nothing. My brother suggested i try downloading malwarebytes on my laptop and installing it on the PC to get rid of it. Malwarebytes picked up the virus and got rid of it. I restarted the computer and when i tried to access the internet on the PC the message on the browser says "Could not connect". My wireless is fine, but the wired connection to the PC is not. When i look at it on the PC it says that it is connected but the browsers show no connection.
View 1 Replies
View Related
Jan 2, 2011
I have had my HP laptop for 2.5 years now, originally bought with Vista 64 bit. It now has Windows 7. Up until now, internet access and connectivity have been working fine. But, all of the sudden today, I couldn't get Internet Access despite trying both an ethernet port and a wireless connection (connectivity was working.) I know it's something with the laptop, because my ASUS netbook has no problem accessing the internet. I've tried looking around at some of these tech support sites and haven't really found anything that's worked for me. I've tried using CCleaner to remove any temp files and clean the registry, and resetting internet settings in the command box, but still I get nothing.
View 5 Replies
View Related
Dec 22, 2012
Have completed a Power Cycle.The affected machine is a HP Elite m9150F desktop. The symptoms include the following:
- neither the LAN connection or the wireless connction will access the internet through Internet Explorer
- microsoft email will not send and recieve
- Steam will not connect
- Norton 360 will connect to live update and download
- taskbar icon shows LAN connection is OK
- When I open Network and Sharing, the network map shows this pc is connected to internet through named network.
- Local Area Connection Status show 197,816 bytes sent and 311,088 recieved.
We have 2 laptops connected to the same wireless network working perfectly. There is also another desktop (Dell 8400) with a LAN connection to the router working perfectly. The affected pc (HP m9150f) is also connected to router with a LAN connection. The D-link Dir-615 wireless router is connected to a Shaw Motorolla modem model SB5102. The HP m9150f stopped connecting a few days ago, other than that, it worked fine.how I managed to get 4 computers running on a network in the first place..
View 19 Replies
View Related
Jan 1, 2013
A few months ago, my family moved to a new apartment, and here we have AT&T U-verse internet connection and the router that AT&T provided; none of our computers have wired connections to it, because that would require stringing the network cables over doorways and/or across the ceiling. However, my parents' computers have had trouble getting internet access until they're warmed up - the system tray icons will indicate they have network connection, but when they try to visit an internet site (even Google), Firefox will say it can't find the server. Once one of their computers has been on for a while (I haven't timed it, but it seems like more than 5 minutes needed, and probably not more than 30), the internet works fine on that computer. I saw this for myself on my mom's computer this morning. I previously set DNS servers to 8.8.8.8 (Google's DNS) and 156.154.70.1 (DNSadvantage), but that apparently hasn't resolved the issue. Dad says he wasn't having trouble with this under Ubuntu, but now that I switched him to Windows 7, it has been happening on his computer as well.
In my room, I've got a desktop PC with a Rosewill RNX-N150HG usb wifi adapter, a Mac Mini (built-in wifi), a 2005 laptop PC (built-in wifi), and several gaming consoles, and haven't seen this issue on any of them.My mom's computer is running Windows XP and has a ECS 945 GCT-M motherboard connected to a Cisco wireless bridge as well as a Rosewill RNX-N150HG usb wifi adapter. My dad's computer was changed from Ubuntu to Windows 7 and has a motherboard that was pulled out of a Gateway GT5676 connected to the same wireless bridge (which we bought because we couldn't get Ubuntu drivers for the usb wifi adapter).I'm hesitant to get a powerline network adapter, because I think the pair I used for a while in our previous apartment was responsible for the death of a router (the router started only acting as a hub, and iirc wasn't accessible when I visited its ip address).
View 4 Replies
View Related
Jun 21, 2011
Wireless network is fine - both my laptops get on without a problem.The Edimax PCI-E adapter:
a) can't connect, or
b) has limited connectivity, or
c) has full connectivity but no web pages work, and the router can't be pinged, or
d) works (for a short while)
The above options are seen pretty much evenly, except for the last one which achieves disproportionately low representation.Have attempted to uninstall/reinstall drivers. Have attempted to delete all profiles. Have seriously considered ripping out the PCI-E and throwing it into the next-door neighbours garden, but fear this may damage the motherboard.
View 3 Replies
View Related
Aug 22, 2012
I am unable to access the internet even though my wireless connection shows as active and strong. I tried the connection hard wired, but still no access. I ran a malware detector and removed two items, still no internet availability. What should I do?The trouble shooting device says "Firewall may be preventing your program from running". I have McAffee security system installed.
View 1 Replies
View Related
Nov 25, 2012
I have a new HP lap top which I have connected to the net thro my edimax 7266 routerI also have another lap top and desktop connected via this router. This other lap top I can connect either wired or wireless so the router seems to be working perfectlyThe problem is when I enable the HP laptop wireless adaptor and try to connect to the net . As soon as I do this the orange light on the router goes solid from blinking and I cannot then access the net from any of the computers either wired or wireless. I have to disable the HP wireless adaptor and reboot the router to get a connection on the computers.
View 1 Replies
View Related
Jan 10, 2012
I am trying to connect a wireless router (EDIMAX br-6228nc) with a ADSL router (NETGEAR). i assigned the LAN IP of the ADSL modem to 192.168.1.1, subnet mask 255.255.255.0, and enable DHCP server.then i connected a LAN port from ADSL router to the WAN port of the wireless router. i assigned IP of the WAN port of wireless router to 192.168.1.10, subnet mask to 255.255.255.0 and default gateway to 192.168.1.1 now on the LAN side of the wireless router i assigned IP 192.168.0.1 and subnet mask 255.255.255.0 enabling DHCP server.on the client pc i selected the setting of automatically assign IP setting (which it got 192.168.0.100, default gateway 192.168.0.1) but my client pc is not able to access the internet.
View 2 Replies
View Related
