Wireless network is fine - both my laptops get on without a problem.The Edimax PCI-E adapter:
a) can't connect, or
b) has limited connectivity, or
c) has full connectivity but no web pages work, and the router can't be pinged, or
d) works (for a short while)
The above options are seen pretty much evenly, except for the last one which achieves disproportionately low representation.Have attempted to uninstall/reinstall drivers. Have attempted to delete all profiles. Have seriously considered ripping out the PCI-E and throwing it into the next-door neighbours garden, but fear this may damage the motherboard.
I have a new HP lap top which I have connected to the net thro my edimax 7266 routerI also have another lap top and desktop connected via this router. This other lap top I can connect either wired or wireless so the router seems to be working perfectlyThe problem is when I enable the HP laptop wireless adaptor and try to connect to the net . As soon as I do this the orange light on the router goes solid from blinking and I cannot then access the net from any of the computers either wired or wireless. I have to disable the HP wireless adaptor and reboot the router to get a connection on the computers.
I have a TP-Link TL-WN723 USB WiFi adapter attached to my laptop, which runs WinXP Service Pack 3. It successfully detdcts the WiFi provided by my Edimax BR62-04Wg router, but when I try to connect, it cannot obtain an IP address and cannot connect to the network.
- The very same WiFi adapter can connect to other routers without any problem - Any other device can connect to the very same network provided by my router without any problem - Using the WiFi adapter with other computers does not work
Thus, it seems that the problem is somewhere between this specific router and WiFi adapter. Here is an interesting detail though:If I try connecting to my WiFi while a LAN cable from the router is plugged into my computer, the wireless connection establishes too. Even if I later unplug the LAN cable, the wireless connection continues to work. But it won't establish the connection without the cable plugged in.Here's what I've already know/tried:
- Rebooting the PC - Re-installing the WiFi adapter's drivers - All drivers and firmwares are the newest available - Re-starting and reconfiguring the router - Using the Windows client for wireless networking and the client included on the WiFi adapter's CD - Changing the router's connection type to any available option: Access Point, Station Ad-hoc, AP Bridge WDS
None of these had any effect except for one:
- When I changed the router's connection type to Station Ad-hoc, I could connect wirelessly even without the LAN cable plugged in, and I had Internet access. However, in this case, other devices, such as smartphones could not detect the WiFi connection.
Ping goes up when I start playing games, random packet loss however if I move my computer the packets get sent again. Hardware problem or software problem?
I'm trying to set up a personal ssh server on Lubuntu 13.04, but I've been having a few problems.
So far i've accomplished this:
I can connect locally, through my internal IP address, I can ping myself through my external IP address through an external internet source(Mobile phone hotspot + Different computer)I have a free dynDNS running, so that I don't have to type my external IP address.It works (if i connect to that IP locally, it forwards to my router)I set up port forwarding in my router, temporarily disabled my personal and the router's firewall too.
The problem I have is that I cannot connect through ssh from a different computer outside my network: The usual response that I get is "Error.. [etc] No route to Host".
I tried using the 'canyouseeme.org' service, and the response is the same.
I use an Internet Service Provider called iiNet, and apparently they have some per-account port blocking features, which I have also disabled from their site.I am running short on resources. DMZ does not work either, default port (22) does not work, custom port does not work either (9222, 9512 or 12222).
So I'm guessing it's either a router fault, or a fault on the ISP's customer-level firewall.
[code]....
I'm connected using a Edimax 7811-nu adapter (Default driver doesn't work, had to install a fixed one)
I'm using a BoBlite Router and the firmware version is BoBLite1500.
I am trying to connect a wireless router (EDIMAX br-6228nc) with a ADSL router (NETGEAR). i assigned the LAN IP of the ADSL modem to 192.168.1.1, subnet mask 255.255.255.0, and enable DHCP server.then i connected a LAN port from ADSL router to the WAN port of the wireless router. i assigned IP of the WAN port of wireless router to 192.168.1.10, subnet mask to 255.255.255.0 and default gateway to 192.168.1.1 now on the LAN side of the wireless router i assigned IP 192.168.0.1 and subnet mask 255.255.255.0 enabling DHCP server.on the client pc i selected the setting of automatically assign IP setting (which it got 192.168.0.100, default gateway 192.168.0.1) but my client pc is not able to access the internet.
the problem is that I'm suffering from ping spikes. When I ping my router it looks something like this:
C:UsersNiklas>ping 192.168.1.1 -n 10
Skickar ping-signal till 192.168.1.1 med 32 byte data: Svar från 192.168.1.1: byte=32 tid=991ms TTL=64 Svar från 192.168.1.1: byte=32 tid < 1 ms TTL=64 Svar från 192.168.1.1: byte=32 tid=2944ms TTL=64[code].....
It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.
I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router
So I have recently bought a modem which has Wi-Fi in it..I use every holidays! When I bought the modem, I set the modem correctly by putting its CD in my PC & following it..But the last week when I opened the internet, the internet was telling that DNS server failed to look-up.. or something like that in my Google Chrome.So I put the disk in my PC.. And again I set the modem correctly by following CD's instructions..Then the internet started to work again..Now today also when I opened the internet the same manner it shows a message.. set the modem again..So my question is why is this happening ??And yea also the Wi-Fi's password setting has been also changing from WPA to Open..Is there a way to set this modem correctly.. without being setting the modem everytime.
I need some brilliant mind regarding my Edimax router. After I install my edimax router my win7 pc connects to the internet however my 2nd computer which is running winxpSP3 is not able to connect. I interchange the utp cable but problem still persist. When my winxp pc is connected directly to the modem internet connection is absolutely good.
Am facing problem with dhcp.Edimax router is not leasing ip to windows xp and its showing as 169.x.x.x ip..i was actually using straight through cable and it worked for 1 day..after that i tried changing to cross over cable.so after that it worked for 2 weeks..then again its not getting ip from router?
i have edimax AR-7084gA router, wired to computer and printer and, working wireless to laptop.I want to connect, wireless, to other devices. but cannot remember password.
I'm having a problem with my aforementioned Edimax, I just can't seem to login to my router homepage, this happened after I reset it, the leds are indicating that the internet is being received etc it just won't let my PCs connect to it because I have to login to the config to reset it.
I have an Edimax BR-6228nS and I set it up as an access point a while ago. I also changed a lot of settings on there and even turned off the DHCP. I need to use it as a router now so I am trying to get into the configure page. After resetting the router, the IP address is still the not the default one. I still can't access it. When I type in ipconfig in the command prompt all it shows is the ip address that connects to my modem. This is what it shows when i type in ipconfig /all. 192.168.15.3 only directs me to my modem's set up page. This is confusing me, is the router not being recognized?
Cannot setup NAT on edimax router I ve got this setup: [URL] It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router ?
I bought myself a new Edimax Modem/router that generates a WiFi network. I installed it successfully but not all of my house is covered well by the network, I even have some 'blank spots', where there's no WiFi at all. What can I do to improve the coverage? I have no problem to buy additional equipment, as long as my entire house would be fully WiFi-covered.
I got an EDIMAX Nano BRN-6258n Router to replace my glitchy Belkin Wireless-G router about a month ago. My typical network setup involves a desktop computer wired to a router and a laptop connected wirelessly.
Anywhere from once a week to twice a day, the internet connection starts (selectively) dropping off. While I cannot browse the web, some of my browser add-ons and Skype/Dropbox are working fine, and Windows almost always indicates a perfectly working connection.
If I am streaming through YouTube or other sites, the stream continues to play after the connection loss.
For AV, I use a combo of Malwarebytes and AVG Internet Security.
Internet cable connects to modem; modem connects to TP-Link router; router connects to XP Desktop. I have three laptops (2 w/ seven & 1 w/ XP) needing connection to router. One of the OS-7 laptops connects fine to WPA2-PSK router. My main concern is the XP laptop which has an Edimax wireless cardbus that I can't seem to configure it correctly. And I have all the information that I think I need, i.e., SSID, Network Key, Physical Address Value, IP Address, Subnet Mask, Default Gateway, DHCP Server Value, DNS Server Value, and more credentials.
I use an Edimax 11n usb wireless lan utility to connect to my router. It gets 60% signal strength and 100% link quality. Either i get disconnected, limited access or no internet access statuses every other hour or not at all. Its intermittent which makes it impossible to explain to the internet provider. The main error that comes up when windows diagnoses is "DNS connection error". Now the internet provider has shown me how to manually set the router to use specific DNS's and that still did nothing.
From My Router that connects to Cable modem i am unable to ping website 4.2.2.2I am able to ping all other websites fines.Same website i can ping from my pc and all other switches fine.Router has only 1 ACL thats for NAT.
I have been having issues with my wifi for the past one week, I earlier had a NETGEAR router which was 2 years old and keeps getting disconnected. I thought it could be a router problem and bought myself an edimax couple of days ago. This one is much worse, it keeps getting disconnected very 20 mins. I have an iMac, alienwareX51, think pad Lenovo, iPad, iPhone, ps3 and BB.
i have with my Edimax router. I could not make any progress with Edimax personnel in Taipei.
If i connect my vista box directly w/o the router, i can see that port 21 (Filezilla) is open, using WhatsMyIP.org | Port Scanners/Sniffers
When I insert the Edimax br6215srg router, the port is in timeout as reported by aforementioned site (guess the port scanner gets no synack nor reset back to the syn it sends)
The router is set to "disable firewall" or to "enable firewall and DMZ enabled" with as client's ip the one that is configured in the router's dhcp table for the vista box. The NAT module is set to forward port 21 to the same ip. ipconfig confirms that i do get the ip programmed in the router's dhcp table.
I do not want to believe that this edimax box is unable to forward connections!
i have a Edimax usb adapter Ew 7612HPn which is brand new, & its not scanning any networks though the light flashes fast, i tried on both my & my dad's laptop, & same problem.Also tried different Usb cables still the same, but sometimes it worked, but mostly dosn't work.Kindly note that i am using this on my vaio Cr 354 windows vista 32 bit SP2 home premium.From day1 it was like kind of faulty, i mean it worked but kind of disconnected in between, but now it dosn't work at all just keeps flashing the blue light.
I just built this desktop and everything seems to be working well accept the connection I want saved on my computer. Every time I turn my computer on I have to select the conection manually and enter the WEP key.
I recently moved from an old apartment in Downtown Montreal, to a suburb area, but still close to where I was before (10 km). I am using the same ISP provider, Videotron. The same speed. I was playing this game, Chivalry Medieval warfare, perfectly fine before, but now something is really wrong. Whenever I join a server, my ping skyrockets up to close to 200, sometimes drifting to 130 but never going below... and often rising back up again.Keep in mind that I filter servers by their pings. I only join servers that display a low ping (although often I won't see any, when I refresh.. there they are). I'll see a server with 30 ping, join it, and be at 200.It's entirely unplayable. Not only is it impossible to properly time parries anymore, but I also get a lot of rubberbanding. I've tested the internet here, and the speeds are accurate. 10 mbps down, 1 mbps up. I am connected to a Linksys E1200 router. I've tried everything I can possibly think of.I went into the router setup, disabled the firewall, added myself to a DMZ, tried to forward every port... rebooted the modem, my computer, the router, tried a different Ethernet cable.. nothing is working. It's very depressing. Nothing has changed on my own computer in the move. I also notice there is a delay of a second or so before I start to load a webpage when I click a link.
I noticed some serious random ping spikes in online games and found that the connection between my Laptop and the E4200 is very very unstable. Sometimes it works perfectly fine but at other times my ping will spike each 5 seconds to three or even four digits and back to normal. I never get disconnected but playing is obviously not possible.
I ran several pingtests through pingtest.net and got everything from 15ms ping 3ms jitter to like 400 ping 300 jitter.
Eventually, I pinged the router (192.168.1.1) and got delays between 2ms and 300ms for both the 2.4 ghz and the 5ghz network. The 2.4ghz channels are fairly crowded but the signal is perfectly fine and stable. The 5ghz band is totally free therefore interference shouldn't be a problem i guess.
I think I've managed to stumble through setting up two E4200s to work together, with only one acting as DHCP server (Benny) and the other in bridge mode (Frida). I can Ping various other devices on my home network, including common items like a NAS drive (wired via ethernet to the server Benny.
Most other devices are wireless so when I Ping, I guess I cannot be sure if each unit is speaking wirelessly to each device I Ping, or if the packets are being passed to the 'nearest' of the two E4200s. I cannot Ping Frida from Benny nor Benny from Frida. I've set Frida up on a static IP at 192.168.1.150 and Benny is 192.168.1.1. They can Ping themselves, but not the other. I can reach the browser utility for each E4200 on its respective IP (and I'm using that utility to do the Pinging).
In the case of Frida Pinging the NAS drive, I think the only way is via Benny. I've tried the Traceroute diagnostic but all I seem to get is results that begin with 1, and then tell me the IP I was aiming for and then repeating that IP. In the case of wireless devices, I interpreted the 1 to mean 1 'hop' (I'm totally trying to decipher the use of English words in networking jargon). I would expect when Frida, the access point, Pings the NAS drive, there ought to have been two hops and I should have seen a trace through 192.168.1.1, but the result reads quite similarly to the other (wireless) devices. My iMac is connected via ethernet through Frida, onto Benny and the internet, and I get good speed and ping results when I check my internet connection. Airport is off, just in case I was circumventing a faulty Frida. But Frida seems to be working in some ways... the browser utility, ethernet.
Oh, in the E4200 manual, it recommends connecting the access point via one the LAN ports back to Benny, rather than through the Internet port. I thought this was weird and things were working when I had it hooked up either way. Right now, it's set up on a LAN port, meaning that Frida has two ethernet LAN ports connected, and nothing else (except wireless).
I have a Sonos sound system 'riding' this network and I can Ping all of the Sonos units from each of Benny and Frida but the Sonos system went down this morning, which is why I started to look into the network itself. Everything worked well, including the Sonos units, before the weekend. Right now, Sonos desktop controller software wants to update itself but cannot seem to see the internet. Is not being able to Ping between server and access point normal?
I'm using Linksys E4200 router. I can't seem to ping the static WAN IP (from internally or externally). All other connectivity seems to be fine. I can ping the routers internal IP, as well as the cable modem and other external IPs. But all port forwarding through the E4200 is failing.Should the default security/firewall setting allow port forwarding? Or do some settings need to change?
why i cannot connection my wirekess G PCI adapter to my wireless N router? Is there compatibility issues between B,G, and N equipment? (router and adapter)I have wireless N router, Netgear and Zonet 802.11g wirelss network adapter.
if it would be possible to use a powerline adapter to connect a to second router? I'm currently hardwired like this, but I'm just wondering if powerline would work the same way, as I'd like to switch which room the wireless is running from.
I recently got a Netgear WNDR3400 Dual Band Wireless Router. When I first installing it everything seemed to run great, download was about 1.5 Mbps and a good ping, 20-70 for gaming. This lasted about a day. While the download does vary due to the service provider, my ping however has suddenly increased to a constant 200-400. This is happening on my Laptop, X-Box 360, and PS3.I have tested both wired and wireless connections from the router and used both the 2.64Ghz and 5Ghz frequency and I still have the same issue. I have then done a wired connection straight into the modem and my ping returns to the 20-70. My Router is less than 3 ft from all systems. I live in a barracks so there are multiple wireless signals floating about. However no one else seems to have any issues with there ping when using a wireless router and there only 1 room above me. I have changed channels on both frequency's, enabled and disabled NAT Filtering, decreased and increased the MTU size within the WAN settings, reset the router to factory defaults, ensured I have the proper firmware, and proper software for my laptop.
