I bought myself a new Edimax Modem/router that generates a WiFi network. I installed it successfully but not all of my house is covered well by the network, I even have some 'blank spots', where there's no WiFi at all. What can I do to improve the coverage? I have no problem to buy additional equipment, as long as my entire house would be fully WiFi-covered.
View 1 RepliesI have a TP-Link TL-WN723 USB WiFi adapter attached to my laptop, which runs WinXP Service Pack 3. It successfully detdcts the WiFi provided by my Edimax BR62-04Wg router, but when I try to connect, it cannot obtain an IP address and cannot connect to the network.
- The very same WiFi adapter can connect to other routers without any problem
- Any other device can connect to the very same network provided by my router without any problem
- Using the WiFi adapter with other computers does not work
Thus, it seems that the problem is somewhere between this specific router and WiFi adapter. Here is an interesting detail though:If I try connecting to my WiFi while a LAN cable from the router is plugged into my computer, the wireless connection establishes too. Even if I later unplug the LAN cable, the wireless connection continues to work. But it won't establish the connection without the cable plugged in.Here's what I've already know/tried:
- Rebooting the PC
- Re-installing the WiFi adapter's drivers
- All drivers and firmwares are the newest available
- Re-starting and reconfiguring the router
- Using the Windows client for wireless networking and the client included on the WiFi adapter's CD
- Changing the router's connection type to any available option: Access Point, Station Ad-hoc, AP Bridge WDS
None of these had any effect except for one:
- When I changed the router's connection type to Station Ad-hoc, I could connect wirelessly even without the LAN cable plugged in, and I had Internet access. However, in this case, other devices, such as smartphones could not detect the WiFi connection.
I have internet over LAN with Motorola SB5102 broadband modem. Is it possible to share this internet on Edimax EW-7416APn V2 access point?
View 1 Replies View RelatedCannot setup NAT on edimax router
[URL]
It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.
I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router
So I have recently bought a modem which has Wi-Fi in it..I use every holidays! When I bought the modem, I set the modem correctly by putting its CD in my PC & following it..But the last week when I opened the internet, the internet was telling that DNS server failed to look-up.. or something like that in my Google Chrome.So I put the disk in my PC.. And again I set the modem correctly by following CD's instructions..Then the internet started to work again..Now today also when I opened the internet the same manner it shows a message.. set the modem again..So my question is why is this happening ??And yea also the Wi-Fi's password setting has been also changing from WPA to Open..Is there a way to set this modem correctly.. without being setting the modem everytime.
View 1 Replies View RelatedI need some brilliant mind regarding my Edimax router. After I install my edimax router my win7 pc connects to the internet however my 2nd computer which is running winxpSP3 is not able to connect. I interchange the utp cable but problem still persist. When my winxp pc is connected directly to the modem internet connection is absolutely good.
View 1 Replies View RelatedAm facing problem with dhcp.Edimax router is not leasing ip to windows xp and its showing as 169.x.x.x ip..i was actually using straight through cable and it worked for 1 day..after that i tried changing to cross over cable.so after that it worked for 2 weeks..then again its not getting ip from router?
View 2 Replies View Relatedi have edimax AR-7084gA router, wired to computer and printer and, working wireless to laptop.I want to connect, wireless, to other devices. but cannot remember password.
View 2 Replies View RelatedI'm having a problem with my aforementioned Edimax, I just can't seem to login to my router homepage, this happened after I reset it, the leds are indicating that the internet is being received etc it just won't let my PCs connect to it because I have to login to the config to reset it.
View 2 Replies View RelatedI have an Edimax BR-6228nS and I set it up as an access point a while ago. I also changed a lot of settings on there and even turned off the DHCP. I need to use it as a router now so I am trying to get into the configure page. After resetting the router, the IP address is still the not the default one. I still can't access it. When I type in ipconfig in the command prompt all it shows is the ip address that connects to my modem. This is what it shows when i type in ipconfig /all. 192.168.15.3 only directs me to my modem's set up page. This is confusing me, is the router not being recognized?
Windows IP Configuration
Host Name . . . . . . . . . . . . : --------
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Mixed
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
[code].....
Cannot setup NAT on edimax router I ve got this setup: [URL] It works well - I can connect from TESTPC and LAPTOP (bottom left corner) to SERVERS A/B/C (bottom right corner) without any problem. Everything seems to be routed perfectly, however from SERVERS A/B/C I cannot ping TESTPC and LAPTOP, and I can't even establish an RDP connection.I was told to setup static routes or NAT, but I am at a loss on how to do it. I am using an EDIMAX BR-6424NL wireless router ?
View 1 Replies View RelatedWireless network is fine - both my laptops get on without a problem.The Edimax PCI-E adapter:
a) can't connect, or
b) has limited connectivity, or
c) has full connectivity but no web pages work, and the router can't be pinged, or
d) works (for a short while)
The above options are seen pretty much evenly, except for the last one which achieves disproportionately low representation.Have attempted to uninstall/reinstall drivers. Have attempted to delete all profiles. Have seriously considered ripping out the PCI-E and throwing it into the next-door neighbours garden, but fear this may damage the motherboard.
I have a new HP lap top which I have connected to the net thro my edimax 7266 routerI also have another lap top and desktop connected via this router. This other lap top I can connect either wired or wireless so the router seems to be working perfectlyThe problem is when I enable the HP laptop wireless adaptor and try to connect to the net . As soon as I do this the orange light on the router goes solid from blinking and I cannot then access the net from any of the computers either wired or wireless. I have to disable the HP wireless adaptor and reboot the router to get a connection on the computers.
View 1 Replies View RelatedI got an EDIMAX Nano BRN-6258n Router to replace my glitchy Belkin Wireless-G router about a month ago. My typical network setup involves a desktop computer wired to a router and a laptop connected wirelessly.
Anywhere from once a week to twice a day, the internet connection starts (selectively) dropping off. While I cannot browse the web, some of my browser add-ons and Skype/Dropbox are working fine, and Windows almost always indicates a perfectly working connection.
If I am streaming through YouTube or other sites, the stream continues to play after the connection loss.
For AV, I use a combo of Malwarebytes and AVG Internet Security.
I am trying to connect a wireless router (EDIMAX br-6228nc) with a ADSL router (NETGEAR). i assigned the LAN IP of the ADSL modem to 192.168.1.1, subnet mask 255.255.255.0, and enable DHCP server.then i connected a LAN port from ADSL router to the WAN port of the wireless router. i assigned IP of the WAN port of wireless router to 192.168.1.10, subnet mask to 255.255.255.0 and default gateway to 192.168.1.1 now on the LAN side of the wireless router i assigned IP 192.168.0.1 and subnet mask 255.255.255.0 enabling DHCP server.on the client pc i selected the setting of automatically assign IP setting (which it got 192.168.0.100, default gateway 192.168.0.1) but my client pc is not able to access the internet.
View 2 Replies View RelatedI want to connect my tata photon device to my bsnl wifi modem via a usb portavailable on the bsnl modem. This is to provide a wifi network that i can use to surf the net on my phone.
View 4 Replies View RelatedHow can i change my modem into a wifi router?
View 1 Replies View RelatedI have a problem connecting wifi router(airlive wt-2000r) to my ADSL modem(webstar epc2203ed2.0) using utp patch cable. When my PC is connected straight to the ADSL modem everything works like charm. But when I connect modem with wan port on the router and router with my PC I get no internet access. The network shows as unidentified network and win7 troubleshooter says: Default gateway not available. Connecting them two devices seems pretty simple and I dont think I am doing anything wrong so what could be the problem?
View 1 Replies View RelatedMy DSL modem/wireless router wont broadcast the wifi signal i need to know if it is just defective or a setting that can be turned off, It was working just fine and just recently stopped broadcasting, it works just fine for a direct connection. (It is a regular windstream wireless modem/router.
View 2 Replies View RelatedIs it "possible to create a WiFi" or make my desktop using hardware connection, a hotspot? (Without buying a wireless router/modem/card) I mean, is there a tweak or program I can download to configure my desktop running on Windows 7 to create wi-fi? The reason why I'm interested in this it's because, for Bluetooth, it's possible. Just wondering if they have the same nature with WiFi (In terms of configuration and tweaks)^,
View 7 Replies View Relatedi have lost my code from the tenda wifi router modem which we can use to put security.without it how to secure wifi?
View 1 Replies View RelatedI have been using broadband in my laptop using asus wireless router/modem DSL-N10E for last 2 months but with Ethernet cable plugged in. I have never used its wifi function. I tried today but was unable to connect after entering security passwordWhen look for troubleshoot it says "There might be problem with the drivers for the wireless network connection adapters"
View 4 Replies View RelatedI've got a Livebox router/modem that provides an ethernet connection for our desktop and wifi connections for our smartphones (all-in-one kind of thing) in a SOHO environment. what i'd like to do is access one from the other, that is move files between a smartphone and the desktop without additional wiring or hardware.
View 1 Replies View Relatedi have wimax usb modem and tenda wifi router with rj45 ports.
View 5 Replies View RelatedI am having netgear JNR 1010 wifi router and I use Cablenet. the wire which carries internet is directly connected to my Desktop pc's LAN port without modem.Is there any way to install this router without conecting to modem?
View 3 Replies View RelatedMy mom wants to buy my dad a Kindle Fire for Christmas. Currently they have a desktop computer with a modem plugged into it and use Verizon dsl for their internet. The Kindle needs wi-fi and I don't want to disrupt the way their computer is set up now.Do I simply plug the router into the modem to get the wi-fi signal?
View 9 Replies View RelatedI have an Att combination Netgear modem-router that is painfully slow when accessing wi-fi gear remotely. Everything works great on the lan, but often times out on remote access over the internet.
View 3 Replies View RelatedConnect WAG160Nv2 with another modem / router Wi-Fi?
View 2 Replies View RelatedI am trying to get my parents Kindle Fire to work. They recently purchased a Motorola Modem/Router which is hooked into the desktop and works fine. I want to get their new kindle to work and can not seem to figure it out. Their operating system is Vista which I can upgrade to Windows 7 if that would make it easier. When I click on setup the WiFi part of the installation wizard cd that came with the Motorola it says there is not a network adapter. I know what that is however I do not know why I would need it when the desktop is hooked directly into modem/router and I just need the WiFi for Kindle.
View 12 Replies View Relatedchange password of my wifi modem.model cisco linksys: WRT160nVv3.
View 6 Replies View RelatedI have an ARRIS Docsys3 modem from Comcast which has a built in WiFi router. I also have a DIR-655. The Modem is in my office and I have a 100' Ethernet cable running through my attic to my front room where the dir-655 is located.
I use the DIR for WiFi as well I have it connected to my TV and Xbox.I use the ARRIS Modem for WiFi as well I have it connected to another Xbox and a Desktop computer.I want to have everything on 1 network, Dir-655 uses IP address 192.168.0.1-100 and the ARRIS uses ranges 10.0.0.1-100. I want to be able to connect to the dir-655 and have the IP for that connection join up with the 10.0.0... network so that I will be able to transfer files freely throughout the network.
I want everything on one network. Right now when I connect a laptop to the DIR-655, I can not access the printer that is connected to the Desktop on the ARRIS modem. I have to connect to the ARRIS modems WiFi to then use the printer on the desktop.Likewise, I want to use the media extender on the Xbox connected to the DIR-655 with the Desktop connected the the ARRIS modem, but I can not because of the to different networks.
I have broadband connection on a wired DSL Modem. Now I want to create a wireless networking environment at my home so to work with my laptop and WLAN enabled phone. I do not like to buy a new Wireless router.
Is is possible to deploy my existing modem/router with some extra equipments to build a wifi hotspot?
have received an Cisco Model DPC3925 modem/router from UPC (provider in the Netherlands) and they allow me to have 120Mbit connection, but with my own WIFI Adapter I only received between the 40Mbit/60Mbit speed. My question is the following; Wich WIFI adapter is the best adapter for my Cisco Model DPC3925 modem/router?The distance between the modem/router and my pc is not that much. And when I use an cable the connection is between the 90Mbit/110Mbit. The WIFI adapter that I now use is the: TP-Link TL-WN881ND. I was thinking to buy a Linksys AE1200, but I dont know if that adapter is much better then I already have.
View 6 Replies View Related