How To Setup Dhcp Server Using Windows Xp
Feb 22, 2011i want to setup DHCP using my windows xp
View 1 Replies
ADVERTISEMENT
Windows 2003 Server - Dhcp Server Cannot Ping Client
Sep 29, 2011i am facing the same problem now but am using windows 2003 server
View 1 Replies View RelatedInstall And Setup Dhcp Server?
Oct 30, 2011I've made hotspot ad hoc and then my client try to connect my hotspot but it must setting manually...how to my client connect to my hotspot automatically not manually??? and how to install and setup dhcp server i windows 7...
View 6 Replies View RelatedMSCHAPv2 / Setup Secure VPN Server Using Windows Server 2012 Without Domain?
Jan 10, 2013i've been using a VPN to connect to my home network from elsewhere for a few months. It's set up as follows:
PPTP
Maximum Strength Encryption
EAP-MSCHAP-v2 Authentication
Now I find out that MSCHAPv2 authentication has been broken and is no longer considered secure (even by Microsoft), so I want to change the protocol I'm using to make it secure.
However, I've spent 3 hours now researching this and I cannot for the life of me figure out how to use a better protocol on my Windows Server 2012 home server. I've tried setting up PEAP authentication (still PPTP) a la Microsoft's recommendation document, but it requires a certificate. I've created a self-signed certificate but it seems I can't issue certificates (via this method) without being a member of a domain, so I'm stuck. I can't even get started with L2TP since I can't find the option for it.
My question is this: Is there a way to setup a secure VPN server using Windows Server 2012 without a domain? If so, how do I do this?
Windows XP Can't Connect To DHCP Server
Apr 17, 2012My Windows xp computer can't connect to the DHCP server correctly and thus can't connect to the internet. It is connected through an Ethernet cable to a wireless router. All other computers on the same network connect fine to the router, both wired and wireless.This all started after I left my computer alone for a few hours and came back with it not coming out of idle. After shutting it off and turning it back on, it would not connect to the DHCP server.It assigned me the autoconfig address 169.254.189.73 because it couldn't connect to the DHCP server. I even tried a static IP but even that wouldn't fix it. I have tried the same ethernet cable in another computer and it worked fine so I know that it is because of my computer.I have tried renewing and releasing the connection using ipconfig in the command prompt but that did nothing. The settings are all the same as the other computers running through the same router. I have tried shutting down all the other computers and reconnecting the trouble one but again still nothing.The last thing I'm not sure about is the network adapter driver. I have reinstalled it but I'm not sure if the driver is correct. I have an NVIDEA nforce 10/100 Mbps Ethernet adapter. I attempted to reinstall but I'm not sure I selected the correct generation when I downloaded the driver installer. My computer says nothing about the generation of the adapter so I just chose the newest generation. My adapter is integrated in the motherboard.
View 19 Replies View RelatedStatic IP From ISP On Windows Server With DHCP?
May 7, 2011I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. THE SETUP: As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. Pretty simple.THE QUESTION: How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address. WHAT I'VE TRIED: I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good.
View 2 Replies View RelatedStatic IP From ISP On Windows Server With DHCP
Aug 22, 2011I'm totally new to using Windows Server 2003 (or any windows server edition) but I do have a basic understand of networking. I have a machine with Windows Server 2003 running an Exchange Server in a office with 5 workstations attached. The server is being used for a basic outlook calendar across the various workstations, nothing major. Our current ISP provides us with a Static IP address. The party that installed and configured the server set it up to run the DHCP server on the server PC itself. As in, the machine running windows server is also running a software DHCP server for the entire network. As of right now we have a wall port (internet access) with a cable running to a 8 port unmanaged netgear switch that has cables hooked up to the 5 workstations as well as the server itself. How do I configure the ISP static settings on the DHCP Server portion of the Server PC? We may be getting a new ISP with a dynamic address OR a new static address.
I've tried configuring the IP address on the Server PC the way I would via the NIC adapter settings but it already has a internal IP address from the DHCP Server running on that PC so changing that was no good. I guess what I'm basically looking for is a screen like this (I hope you're familiar with the configuration pages of Linksys Routers) url...
Configure DHCP And DNS On Windows Server 2008 R2?
Apr 16, 2013I want to set up a domain for a file server and MS SQL 2005 server on my server machine and installed windows server 2008 in it.
Do I need to set up DHCP server and DNS on Windows server 2008R2 or leave them to the router to do the job?
Cisco Wireless :: WLC 5508 - Separate DHCP Server Required To Get Option 43 Setup Properly?
May 7, 2012I am using a WLC 5508 and its internal DHCP server. I cant find anywhere I can setup option 43. However, the access points are connected in just fine. Do I need to worry about setting up a seperate DHCP server to get option 43 setup properly?
View 7 Replies View RelatedServers :: DHCP Server Failed On Diagnostic Test Windows
Jul 29, 2011dhcp server failed while running network diagnostic test for windows xp
View 1 Replies View RelatedCisco Switching/Routing :: 892 Interfere With Windows DHCP Server
Mar 27, 2012I have trouble with a Cisco 892 Router from my Internet service provider.
Last week we switched from a virtual Router to a hardware Router. But after plugging it in our LAN Switch, the Windows DHCP Server stopped leasing IP's. I got many BAD_ADDRESS with MAC like e1:80:10:ac, e2:80:10:ac, e3:80:10:ac, e4:80:10:ac, e5:80:10:ac, ea:80:10:ac, eb:80:10:ac, ec:80:10:ac and so on.
I do not have access to the Router config, so I can not dump the config to you. We have a flat LAN, single SUB-Net(172.16.0.0/16) and no VLAN, no Spanning Tree. A Keep it Simple, Stupid(KISS) System.
A tech guy from service provider, is telling us, the error is not there fault and my switch is not correctly configured. But this is ********. For years we had a another Cisco Router from the precursor ISP and for 2 years the virtual Router from our current ISP. No trouble with my DHCP. But after plugging the new Router in, my DHCP stopped working.On the 892 is no running DHCP, but something interferences with my Windows Server 2008 R2 SP1 DHCP Server.
Cisco VPN :: ASA5510 - AnyConnect Using Windows DHCP Server But Can't Access LAN PCs?
Oct 1, 2012I've got my AnyConnect setup to get an IP from our Windows DHCP server just fine. It grabs the IP, mask, and DNS just fine. But I can't ping any of the lan devices or do any DNS lookups. I need it to work this way since we have a ton of site-to-site's with remote offices and getting them all to adjust their firewalls to allow another subnet is a nightmare.
I have split-tunneling enabled. I'm sure it's a nonat command that I'm missing, but not sure what.
Before connecting to VPN:
Home user-------------------> ASA 5510 --------------> Office Lan
192.168.1.0/24 10.10.1.1/24
After they connect to AnyConnect
Home user-------------------> ASA 5510 --------------> Office Lan
192.168.1.0/24 10.10.1.1/24
10.10.1.45/24
How To Setup NAT In Windows Server 2008
Nov 5, 2011i m having one static ipwant to create the network in computer labhow i do thisi have one cisco router assigned with one ip address
View 1 Replies View RelatedSetup An Apache Server 2.2 For Windows?
Apr 8, 2012I am attempting to setup an Apache Server 2.2 for Windows, everything is set up but the server will not start, I heard it may be caused by my virus protector using Port 80 but I cannot find the httpd.conf file for it in the directories they say it should be in, I even did a tree/f with CMD DOS?
View 5 Replies View RelatedCisco Wireless :: 5508 Controller And Changing Windows Dhcp Server
Dec 5, 2012We have a 5508 controller authenticates with WPA2-enterprise to 3 possible AAA servers. Today I tried migrating our DHCP server from a Windows 2003 machine to Windows 2008 R2. Migration went smoothly and all wired clients could get IP's. Reservations intact, scopes intact, etc.. you name it. I though it was a great success.
Fast forward about an hour when people started coming into work for the day. Calls started coming in about their laptops not able to connect to the network. I double checked with a spare laptop in our IT department and also my iPhone. Same issue. Seems the only thing I changed today was the DHCP server (from 10.1.1.1 to 10.1.1.2).
After racking my head on it for awhile, I re-enabled the "old" dhcp server (10.1.1.1) and disabled it on the new (10.1.1.2). Instantly wireless clients were able to connect.
Am I missing some configuration step in the 5508 controller when moving DHCP servers? I do plan on running 2 DHCP servers (10.1.1.2 and 10.1.1.10) for redundancy once I get the primary one moved over and working correctly.
I want to decommision the older 2003 server. Its time to raise the domain functional level.
Setup 2 Network Card Windows Server 2008?
Aug 16, 2011First network card have the static IP address 82.x.x.30 from the ISP.The second network card have 2 IP addresses: 192.x.x.0 and 82.x.x.1 ( first IP is for LAN and second IP is for routing the additional IP class).In other words if i have the computer "Z" with configuration: IP: 82.x.x.100 Sub: 255.255.255.128 and GTW:82.x.x.1 i can access the internet but practically with with the IP from ISP wich is 82.x.x.30
View 1 Replies View RelatedHow To Setup A Windows XP File / Printer Home Server
Jan 21, 2013I would like to set up a home server, that will sit under the stairs so that it can link to out BT home hub (v3). The idea is then to connect the printer to it, so that we can have both a wireless printer and a central file store for pictures/vids etc.Is XP ok for this? if so, what settings do I need to change/add?Is there any software that I need to make it work?How do I make sure that it is secure for external hacking? As it will contain our personal docs/photos etc and I would hate to use them.
View 1 Replies View RelatedCisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2
May 15, 2011I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.I got 2500 WLC with POE switch and 4 aironet AS 1142.
View 16 Replies View RelatedCisco Firewall :: Unable To Setup VPN Between Windows 2008 Server R2 And ASA 5505?
Sep 9, 2012I have assigned a task to configure a vpn between windows 2008 server and cisco asa 5505, what kind of vpn should i go with as the windows 2008 server r2 is on cloud and is it possible to configure site-to-site vpn for this network senario or not.. i have try ikev1/ipsec remote access vpn with l2tp with (CHAP, MS-CHAP v2) and couldn't find any document which will allow me to configure windows 2008 server to behave a client and connect it to asa, well what i did is that i configured a dail-up connnect with l2tp and found the following debug message
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, Oakley proposal is acceptable
Sep 09 20:04:02 [IKEv1 DEBUG]IP = 172.16.32.5, IKE SA Proposal # 1, Transform # 1 acceptable Matches global IKE entry # 1
[Code].....
Cisco Wireless :: WLC 2500 Series Setup With Windows Server 2008 R2
Jun 27, 2012I am planning to implement wireless network in my work place. Plan is to have two networks one for guests and one for employee. I am trying to find a guide for 2500 WLC but couldn't find one.
I've been reading couple of articles about setting up radius server and CA. I want to know what the best way to approach this.
In my environment I got a CA server windows server 2003 and current DC's are windows server 2008 R2.
I got 2500 WLC with POE switch and 4 aironet AS 1142.
Linksys Wireless Router :: Setup EA6500 To Accept FTP Requests To Windows Home Server?
Apr 18, 2013I am looking at buying the EA6500 router. However, before I make the investment into buying this router, I need to know some basic information first.
1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server. Yes or No?
2. Remote access to the EA6500, Yes or No? i am aware of the security risks
3. I need to setup Port forwarding on the EA6500. I assume I can?
4. Manage a Kindle Fire and other wireless devices?
Cisco :: Change LMS 4.0.1 From Server Under Windows 2003 To New Server Under Windows 2008 R2
Jul 5, 2012I planned for my customer to replace his old LMS 4.0.1 server under Windows 2003 by a new server under Windows 2008 R2.Customer wants also to set a new LMS name and IP address for the new server under Windows 2008 R2 and keep both servers on the network.I'm wondering what could be the best procedure to do that migration.Can I used backup / restore procedure in that case ?If yes, what file must I modify to adapt the new LMS configuration to new hostname and IP Address ?
View 2 Replies View RelatedServer 2008 - Share Internet Through DHCP Server
May 6, 2012[code]...
I am able to obtain IP addresses through the DHCP server for my clients and I am able to browse internet on the server 2k8.Server 2008 - Share Internet through DHCP server
Possible To Setup DHCP At 2 Sites
Oct 7, 2012I have 2 sites connected via site to site vpn. Site 1 is the main site with a set dhcp scope. The second site (with its own scope, different to site 1). They are currently 2 domains with a trust. I want to make it just one domain. I want all users at site 2 to logon to the domain through a local server rather than over the vpn. Can I set upthe local server at site 2 with its own DCHP scope, so it can allocate it locally? If so, does it need to be part of the whole domain scope?
View 1 Replies View RelatedCisco Wireless :: Setup DHCP On WLC5508?
Apr 17, 2013Is it possible to setup DHCP on the WLC5508? If i have 2 or 3 VLAN with different Scope and IP range, how can i do?
View 1 Replies View RelatedCan't Connect To Server 2008 Via Server Manager On Windows 7
Feb 11, 2011I have install the administration toolpack on Windows 7 and enabled remote connections on my server 2008 box, When i try and connect with my Windows 7 server manager it does not work.I see stuff on google about enabling a trustedhost with winrm but can't find a way to do this.
View 18 Replies View RelatedITunes Server For Windows Home Server 2011?
Mar 10, 2011Is there an iTunes Server for WHS 2011 available?
View 3 Replies View RelatedLinksys Wired Router :: DHCP Setup On RV042?
Mar 16, 2011We have a Network set up with a RV042 router. Router is hooked up to Cox Cable and ATT DSL. Currently have 20 computers hooked up to the router all using Static IP addresses. Setup has been in place for over 7 years. I want to set up a Wireless Access point on this network. The problem is, I can't seem to get DHCP to work right even WITHOUT the Wireless Access Point. I have taken one of the computers that works great with a static IP and changed it to be DHCP, I have enabled DHCP on the router and set the from and thru parameters for the IP assignment. The computer will connect and get an IP address and it allows me to see all the INTERNAL servers on the network but going to the Internet is REAL FLAKY. I usually have to refresh 5 or 6 times to get a web page and sometimes even that don't work. If I do get a page to come up there is about a 10% chance that it will bring up a subpage of that page without doing a refresh 5 or 6 times. Its like it won't hold the connection to the Internet. I did notice one thing different in the User Manual of the RV042 that is different than all the other Linksys routers I have worked with. It says that when you enable the DHCP on the router, you then make sure ALL computers hooked to it are set for DHCP. All other routers I have worked with do NOT use that word ALL. Am I missing some setting or is this a binding thing where you are either ALL static or ALL DHCP?
View 1 Replies View RelatedCisco Routers :: RV042 - How To Setup DHCP Option 66
Oct 13, 2012I need DHCP Option 66 to be enabled my small business RV042 router, so the IP phones could know where is the TFTP server.
View 1 Replies View RelatedHow To Set Up A DHCP Server
Jul 9, 2012anyways here is my concern, we have a DHCP server in our company (HOTEL) and the Computer wont turn on, the computer is Compact Proliant Intel Inside Pentium Pro Processor OS Windows Server 2003, this Computer is so old. they been using this for 12 yrs and they didn't upgrade... now its dead.
since this Computer wont turn on, all of the computers cannot access in the internet, so for the meantime this is what I did... from the modem to router, I configure the router as a STATIC IP and I enter the IP address provided by our Internet Service Provider after that all of the computers form the hotel have internet connection.
now I'm planning to build a new PC and set up a DHCP server but I don't know how and where to start
4-port Zyxel P334U - Local DHCP Router Setup
Apr 26, 2011I have a 4-port Zyxel P334U with WLAN, and I would want to set it up so that besides normal WAN, each connected computer also has access to the other local computers. I've tried setting it up before, but haven't managed to get it working, so I gave up.I have DHCP set up, beginning at 192.168.1.16. WAN and ISP DHCP works, so each computer has a local IP (192.168.1.x) and a remote IP given by the ISP.
View 6 Replies View RelatedWant To Connect Server With Windows Server 2003
Aug 28, 2012After getting New Workstations, I wanted to connect that to the SERVER but Windows 7 could not log into domain of our server with Windows Server 2003. Besides following the proper process/steps. I am able to use the printer and internet shared through SERVER though.
View 2 Replies View RelatedServer 2008 R2 Windows Server Backup
Dec 14, 2010I've been reading that the Windows Server Backup that is included with Server 08 R2 is pretty good. Is spending $400 on a third party utility worth it?
I'm asking because we're purchasing a new server soon and I want to know if the included backup is going to be good enough. Will be backing up server state as well as data to tape and possibly an off site server (server 2003) if I get my way.