DHCP Get Identifying Network Forever
Apr 20, 2011
Out of all the computers in my house there is one computer that does not seem to be able to get an internet connection. Usally I would fire up the computer, then unplug and put back in the wireless device and it would start working but just recently no matter what I try it will not work. When I set the computer up to connect with a static ip, i get a local connection only (or at least thats what networking centre says) and when i rely on dhcp i get 'identifying network' forever. No network settings have been changed and I have tried an ethernet connection as well which also didn't work. I have tested the wireless device on another computer and it works fine.
View 14 Replies
ADVERTISEMENT
Nov 8, 2011
I have a Dell Latitude D620 and my wireless isn't working. It worked before but then I had a malware/spyware on my computer that blocked my wifi and when I managed to get the program off, my wifi still wouldn't connect. It's not the wireless card because I bought an external one and it did the same thing. It's not my router because my other computer connects to the internet.
View 1 Replies
View Related
Jul 24, 2012
My work wireless network is stuck on identifying. It works for ALL other computers in the office. It works when I am wired to the router. I've tried most things that forums tell me to do. Below is the IP config. It is only this network and one other. Both are provided by verizon if that makes any difference.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersShaun>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
[code]....
View 4 Replies
View Related
Jul 25, 2012
I've recently been on a kick of acquiring a small collection of the old school stackable Linksys equipment, and in one of my searches I came across a picture of one I'd never seen before.
View 4 Replies
View Related
Jan 21, 2012
i have tried many things i have tried to reset my router with the cmd prompt i have checked my drivers i have tried the simple things and at this point.
View 1 Replies
View Related
Feb 19, 2012
It all happened pretty suddenly, from 1 day to the other, suddenly i was unable to connect to my home network. I started to troubleshoot, search forums etc. But no luck. I triedand look for the problem myself and found that thenetwork was enabled but it stayed on "identifying network". By clicking buttons from here and there on thecontrol panel i found something like a network recognition or something like that and a yellow little prompt appeared on the top of the explorer saying something like the network idetification was disabled, so i clicked and selected enable but it prompted again, so i just entered to the advanced network recognition center and noticed that on the public and private tabs netowrk recognition was disabled, so i clicked enable on both and saved changes, but the changes dont save, its like if i wasn't on a administrator account (but i had no error messages, it just wont enable).
View 19 Replies
View Related
Jan 19, 2012
Where I tried to conect to my home wifi or the school's wifi and it just says "identifying" on the network connections and on the list of wifi networks around in the notification area it says "No internet acces" and can't connect to the internet. I stoped trying to look for a solution but I don't have internet at home
[code]....
View 5 Replies
View Related
Nov 22, 2011
So here's a fresh spin (and not in a good way) on the seemingly common port-flapping issue, where a windows vista/7 machine's ethernet port vacillates between "enabling, identifying,network cable unplugged." I've tried the fixes I've seen around, like forcing the speed to 10 or 100Mb duplex,etc. But I think the problem goes deeper than that -or drivers or faulty NICs. Its acting like it's in the cabling. . . but not. Any advice would be welcome.Just switched from one DSL provider (Bell) to another (Teksavvy). Connected via a dry loop. When the Bell tech first set it up a year ago, he did it like this: Patch cord frome the Bell 2Wire modem/router combo to a female coupler. Female coupler attached to cat5 cable running about 25/30 feet along baseboards around the corner to another female coupler. Patch cord from female coupler to NIC in the back of my box. This worked fine. New set up with Tek savvy is as follows: DSL modem via patch cord to (wireless) D-Link router. D-link router connected to computer by same aforementioned setup. This results in the port-flapping named in the title of this message, on the hard line only. Any change in my computer was ruled out by connecting a brand new, never been connected laptop and the same terminal as my computer. Results in port flapping. The same laptop connected to the router by just the patch cord results in a perfect connection. I've tried moving the patch cords around, it doesn't change the results, so they're fine. I have no way of testing this long stretch of installed cable in the middle, with the couplers on it, since I don't have an equal length cable to try out anywhere, but I'd be surprised if that just died after a year's use exactly when I connected new hardware to the other end of it. Running windows 7 with a RealTek NIC on my box. D-Link router (will check the model later, at work at the moment), and TP-Link DSL modem. The system delivers wireless internet flawlessly.
View 2 Replies
View Related
Feb 10, 2012
why I have perfect internet access on my Desktop and other lap top but on my Toshiba Windows 7 I get the "Identifying...""No Internet Access" every time. Ive tried deleting the bonjour service.
View 1 Replies
View Related
Dec 21, 2012
I am having Dell Inpiron 4030. Following are specs
Quote: Quote:
Processor: Intel(R) Core(Tm) i3 CPU M380 @2.53GHz
RAM - 2.00 GB
OS - Windows 7 ultimate 32 but
I am unable to connect to the wired network. We have a 4 port prolink router and there is no error with it. I know because I am using the same cable for my laptop, which I am using for my desktop. I just unplug it from the desktop and plug it to laptop. I am unable to provide any specs from the desktop because there is an error in that computer.
However, I can give ipconfig/all data from my father's computer, which use another port of the same router.
My laptop is working perfectly with the Mobile BroadBand. And this is a dual boot computer with Ubuntu 12.04 LTS and the cable is fine with Ubuntu.
Following is the result of ipconfig/all
Quote:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersyohan>ipconfig/all
[Code].....
View 8 Replies
View Related
Apr 19, 2012
Data collection runs forever (since this morning). Also an reboot of the LMS server didnt work. Checked all processes and ani.log -OK. After reboot, the time stemp for Toplogy changed from 8:00 to "Not Available"
Inventory Collection24019 Apr 2012, 12:15 CEST
IdleScheduleConfig Archive24016 Apr 2012, 16:24 CEST
IdleSchedule
View 1 Replies
View Related
Jan 4, 2011
I read somewhere this is to show that the connection is unstable? My modem works fine, and it works fine being plugged directly into my PC.
But going through the modem, I am noticing some drops in speed and spikes of high latency. This icon - the little earth/internet icon - has never flashed for a long period of time before. I've power cycled it (unplugged for over 5 mins) and it persists.
Does it need a firmware upgrade? Is it something I did? Faulty hardware?
View 4 Replies
View Related
Apr 23, 2013
I was login with my "router password" to my EA4500 yesterday without problem, after I brought another EA4500 today and try to find out my existing EA4500 configuration.I just can't login..I mean it just stay forever on the "Waiting..." screen after I enter the "router password"
-no luck with changing browser, I try ie, firefox, chrome, is still the same
-no luck with other pc, I try login with another notebook or pc, is same..
-no luck with switch off, I try refresh button once, same..and try to turn it off 5 minute and try again..same
View 9 Replies
View Related
Feb 7, 2011
Problem: I bought my wife and I each a Gateway NV54 laptop this past year. While both of our laptops can acquire a network connection, she is able to browse the internet almost immediately, while my computer takes 30 seconds to a minute longer to connect to the same network, and then can take up to 3 minutes before any web browser recognizes the connection. This happens on every connection I make (school, work, home, etc.)Steps I have taken:
-Updated the driver for my wireless adaptor (Atheros AR5B93 Wireless Network Adapter), and nothing changed.
-Windows 7 service pack (6.1)
-Downloaded AVG, Spybot, Advanced System Care, and IObit Security and run scans in all 4 at least 3 times a week.
-Cleaned up hard drive files so that each of my two hard drives is less than 70% full.
-Removed superfluous internet connections and prioritized the important connections I use regularly.
View 1 Replies
View Related
May 12, 2007
I have an Inspiron E1705 and my wireless card/adapter takes about 3 minutes to load each log in. I called Dell, and they couldn't find out what was wrong. We tried things from internet settings, to shutting off all the start ups in MS Config. I've had this problem for a very long time. Windows will start up, and it seems like there is a 3 minute wait period of my computer doing nothing, and then finally, the wireless loads in my System Tray.
View 14 Replies
View Related
Feb 12, 2012
I have a Dell E4300 with a 1510 wireless mini adapter running windows 7 pro with a netgear WNR3500 router running wireless N protocol. I have my laptop setup to sleep when lid is closed. When it awakens the wireless connection will not automatically reconnect and I have to manually select the SSID and connect. It will also reconnect if I use the network troubleshooter. The problem does not happen if I reboot the PC or start from a power off situation. I have the latest Dell driver and I am running the DWLAN utility.
View 3 Replies
View Related
Sep 19, 2011
What the problem that whenever I try to connect to the internet it will forever say "identifying" and never get internet access. It is the same problem with both wireless connections and when I have an Ethernet cable plugged in. I'm sure its not the internet that's the problem because I am using the same connection right now but with a different laptop.
View 4 Replies
View Related
Sep 24, 2011
ok so the problem is our old modem/router combo finally died after 6 years of doing good. After that we bought a new router and used an old modem, that seemed to work for about 2 weeks problem free. But after that the internet would just drop when someone would play a online game, stream a big video, or after a random amount of time would drop on its own. The connection icon would loose its globe and have two screens with each screen flashing say identifying. after that we got a new modem and still have the same problem. We have two laptops connected to it and they can connect to the router but not the internet as-well.
View 3 Replies
View Related
Mar 22, 2011
I'm at my girlfriend's house and every laptop in the house works beside hers! I tried mine and it connects flawlessly also my itouch and my eee-pc also connect without any trouble but her laptop is stuck on Identifying i tried the whole netsh reset thing and sadly we cannot have access to her router as her dad hates it when we play in his Linux based stuff anyways any simple fix would be welcome, i hope no one will suggest changing routers/reinstalling the whole OS[CODE]
View 5 Replies
View Related
Apr 21, 2011
I'm a network admin for a medium-sized (500-700 people) multi-site business and I have a simple question. Is there any utility or method I can use to identify the physical path a packet of data takes from a workstation on the LAN to a server on the same LAN?
For example, if I send a tracert command at google.com, I can see every router the packet touches before it gets to Google's router. Is there a method I can use to determine a similar path with switches in my internal network? If I use tracert or pathping, I only get a single hop since the workstations are on the same LAN as the servers even though I know there are two physical switches between them.
Basically, I want to send packets from a group of workstations behind a couple switches to a server and see if the packets are being lost in the switch somewhere to identify if there is a failing switch or something causing network slowdowns. map out the network more accurately so it would be useful to know.
View 1 Replies
View Related
Aug 11, 2011
I've been having this problem on my computer for about a month. I've seriously done everything everyone has suggested after searching every inch of every tech forum. The above did not work for me.
View 2 Replies
View Related
May 7, 2013
Region : Italy
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Vodafone IT
Basically, the 3g port is absolutely not working in both devices.I've tried with 4 usb 3g adapter (all huawei and listed under compatible), THEN i bought a MA180 (yes, the TP-LINK 3g usb stick) and even this is not working.The MR3040 if i connect the MA180 simply will blink the MR3040 3g led ONCE, after that it simply does nothing.if i go under the status page on 192.168.0.1 it basically says:"3g usb: Identifying.." and it still stops there for even an hour.Same on the MR3020.
View 1 Replies
View Related
Sep 2, 2012
A day ago, I was having trouble with my apartment modem, and due to a busy schedule, was only able to do a quick "Unplug and reset" which seemed to work at first, but eventually it stopped working all together. Today, I traveled from my apartment to my "home" home, where the wireless network is set at a "Home" security level. However, my wireless now will not connect at all. It continues to cycle through "Identifying" yet cannot make the connection. It works through a LAN connection however.So far, I've attempted the follow:
- run>ipconfig/all, ipconfig/reset, etc
- winsock reset
- system restore
My computer is a Samsung RC512, running windows 7. Here's the paste from my ipconfig/all:
Windows IP Configuration
Host Name . . . . . . . . . . . . : PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.pa.comcast.net.
Wireless LAN adapter Wireless Network Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : DC-A9-71-93-16-52[code]....
View 1 Replies
View Related
Aug 30, 2011
I cannot connect my laptop to any of the normal wireless networks I use.It says, it's connected with good signal strength but than it never stops "identifying" and doesn't load any pages.
View 4 Replies
View Related
Oct 1, 2011
Yesterday I got one my computer and was on my internet then i closed my browser and 10 minutes later got back on but then it wouldnt let me so I went to my networking and sharing center and its stuck at Identifying..
View 11 Replies
View Related
Mar 16, 2011
My company uses an ASA 5520 to authenticate VPN using the Anyconnect client. We would like to deploy a second authentication method such as Host Scan (CSD.) Our ASA is currently running on a "Plus" license. As I understand CSD will only work with "Premium?" If this is correct are there other options for two part authentication? We're also considering using FOBs and have ruled out using the NAC.
View 3 Replies
View Related
Aug 10, 2012
For a while now when I try to connect to my wireless router (Netgear WNR1000) It says "Identifying..." for a while, but then it will disconnect . My wireless only works sometimes if I reset the router every once and a while. Even then it will connect properly with my computer for two days tops. The wireless works on the other computers in the house, just not mine. I've checked all of the wireless settings to make sure they match correctly to the network .
View 14 Replies
View Related
Mar 22, 2013
Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : V2
ISP : Reliance netconnect Vendor (ZTE Model AC2736) CDM
Region : India
Just now I bought this router. When I am trying to configure it with default firmware is not identifying the modem itself. So Afyter facing this problem, I updated my Router firmware(TL-MR3220_v_2_120822) and retry the process. But this time, It identified the modem for few seconds, then its changes its trying to connecting, after that its change it state to unplugged.
View 1 Replies
View Related
Oct 2, 2012
So we have multiple ISE Servers with differing personals. I was having an issue with our new ISE setup not identifying AD Group Attributes when using them in Authorization rules. We have 2- 3395 appliances running Admin and Monitoring/Troubleshooting Personas and 2- 3395 appliances running as Policy server personas. We are running v1.1.1.268 with the latest two patches. I was unable to pull Active Directory Group Attributes in any of my Authorization rules. After Resyncing all the boxes with the Primary Administration box I was able to do this. There is no bug listings for this occurrence nor do we have Smartnet to call support for other reasons.
View 3 Replies
View Related
Jun 27, 2011
I purchased a new Acer 5742G-6600 from Newegg about 2 weeks ago.When using my wireless connection, I am randomly dropped, then reconnected to the internet. This effects gaming (constantly disconnected from WOW after maybe 2 or 3 minutes) and streaming video. I can connect directly to the router or modem by cable and the issue never occurs. My girlfriends laptop is able to connect to the wireless connection with no issue. We also had a friend over on his laptop, and he had no issue with the wireless connection.I have uninstalled and reinstalled the wifi card drivers (Atheros AR5B97 Wireless Network Adapter), disabled the power management features, and updated Win 7 64-bit.
View 9 Replies
View Related
Mar 28, 2013
I'm thinking of purchasing a Cisco Linksys EA6500. I need a router that can one monitor bandwidth used by device. Keep exceeding our ISP's network bandwidth allocation, need to identify the devices that are causing this high usage and be able to do so from the router. Does the EA6500's standard software support this, is their router software one can obtain for the unit that does this or is there another home router option that can perform this function?
View 6 Replies
View Related
May 28, 2012
For numerous reasons, I want to bind my DHCP clients to static IP addresses, but can't figure out how to do it in DD-WRT.
I've googled, but every link I click times out (for this specific search- my uplink is otherwise fine).
I know I can do it with hardcoded IPs, I'm just curious how static DHCP is done (and yes I am aware that Static is a contradiction in terms of DHCP. I want a given MAC to always get the same IP) and would like to have some info on this.
(call this reserved DHCP if you prefer... )
View 4 Replies
View Related
Jul 18, 2011
I have a computer on a school network, i recently set up a WDS server to make rebuilding computers allot easier and faster. I created an image for a Inspiron Desktop 560ST but when i tried to redeploy the image back on the exact same computer while connecting to WDS deployment service i get this error.
<Installing windows>WdsClient: An error Occured while obtaining an IP address from the DHCP server. check to ensure that there is an operational DHCP server on this network segment.
[code]....
Our default IP is not a 169.xxx.xxx.xxx it is 172.xxx.xxx.xxx so thats obviously not right, and then I try typing ipconfig /renew and it waits a super long time and then i get Windows IP Configuration:An Error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out.An error occurred while releasing interface LoopBack Pseudo-Interface 1 : The system can not find the file specified. This computer is part of a lab of about 25 computer and every other computer has no problems, even if i take the network cable out of this computer and plug it into the computer right next to it(I'm take it right from one computer to another, i'm not touching the switch end) the computer right next to it is fine. So its not the switch or the cable.
View 2 Replies
View Related
