Wireless Internet Connection Stuck At Identifying?

Oct 1, 2011

Yesterday I got one my computer and was on my internet then i closed my browser and 10 minutes later got back on but then it wouldnt let me so I went to my networking and sharing center and its stuck at Identifying..

View 11 Replies


ADVERTISEMENT

Stuck On Identifying: Wireless Internet

Aug 11, 2011

I've been having this problem on my computer for about a month. I've seriously done everything everyone has suggested after searching every inch of every tech forum. The above did not work for me.

View 2 Replies View Related

Wireless Network Is Stuck On Identifying?

Jul 24, 2012

My work wireless network is stuck on identifying. It works for ALL other computers in the office. It works when I am wired to the router. I've tried most things that forums tell me to do. Below is the IP config. It is only this network and one other. Both are provided by verizon if that makes any difference.

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:UsersShaun>ipconfig
Windows IP Configuration
Ethernet adapter Local Area Connection 2:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :

[code]....

View 4 Replies View Related

Laptop Is Stuck On Identifying?

Mar 22, 2011

I'm at my girlfriend's house and every laptop in the house works beside hers! I tried mine and it connects flawlessly also my itouch and my eee-pc also connect without any trouble but her laptop is stuck on Identifying i tried the whole netsh reset thing and sadly we cannot have access to her router as her dad hates it when we play in his Linux based stuff anyways any simple fix would be welcome, i hope no one will suggest changing routers/reinstalling the whole OS[CODE]

View 5 Replies View Related

Can't Connect To Wired Network - Stuck On Identifying

Feb 19, 2012

It all happened pretty suddenly, from 1 day to the other, suddenly i was unable to connect to my home network. I started to troubleshoot, search forums etc. But no luck. I triedand look for the problem myself and found that thenetwork was enabled but it stayed on "identifying network". By clicking buttons from here and there on thecontrol panel i found something like a network recognition or something like that and a yellow little prompt appeared on the top of the explorer saying something like the network idetification was disabled, so i clicked and selected enable but it prompted again, so i just entered to the advanced network recognition center and noticed that on the public and private tabs netowrk recognition was disabled, so i clicked enable on both and saved changes, but the changes dont save, its like if i wasn't on a administrator account (but i had no error messages, it just wont enable).

View 19 Replies View Related

Cabling / Cards :: Wireless Connection Stuck Acquiring Internet Address?

Dec 27, 2011

i have a dell inspiron mini 10 and i put windows xp pro sp2 on it and got all the neccesary drivers for it the problem with it is that it detects my router and everything but when it tries to connect it gets "stuck" on aquiring network adress i tried the winsock fix and everything but nothing seems to work

View 1 Replies View Related

Internet Gateway Connection Stuck On Connecting?

Oct 3, 2012

I can browse web pages and such, but i can't watch any videos or download bigger files. The videos usually play for about 4 seconds and files download about 3 MB before it just loads forever. I go to control panel and look at the network connections, and while the LAN is connected, the internet gateway just says "connecting".

View 1 Replies View Related

Internet Keeps Dropping And Identifying?

Sep 24, 2011

ok so the problem is our old modem/router combo finally died after 6 years of doing good. After that we bought a new router and used an old modem, that seemed to work for about 2 weeks problem free. But after that the internet would just drop when someone would play a online game, stream a big video, or after a random amount of time would drop on its own. The connection icon would loose its globe and have two screens with each screen flashing say identifying. after that we got a new modem and still have the same problem. We have two laptops connected to it and they can connect to the router but not the internet as-well.

View 3 Replies View Related

Linksys Wireless Router :: E1200 Stuck At 1mb/s - Have To Reset Connection

Jul 29, 2012

since last nite my router E1200 has been having speed up and down problems.first it goes to 150mb/s then back down to 1 for a few minutes, usualy its stuck at 72mb/s which is a far cry from its rated 300mbps but qi'd rahter have that than 1-2mbps.i'd be happy with 150mbps but that only lasts 5mins then goes down to 1-2mbps and i have to reset my connection.

View 9 Replies View Related

Toshiba With Windows 7 Identifying Network But No Internet Access

Feb 10, 2012

why I have perfect internet access on my Desktop and other lap top but on my Toshiba Windows 7 I get the "Identifying...""No Internet Access" every time. Ive tried deleting the bonjour service.

View 1 Replies View Related

Acer 5742g-6600 Wifi Randomly Identifying No Internet Access

Jun 27, 2011

I purchased a new Acer 5742G-6600 from Newegg about 2 weeks ago.When using my wireless connection, I am randomly dropped, then reconnected to the internet. This effects gaming (constantly disconnected from WOW after maybe 2 or 3 minutes) and streaming video. I can connect directly to the router or modem by cable and the issue never occurs. My girlfriends laptop is able to connect to the wireless connection with no issue. We also had a friend over on his laptop, and he had no issue with the wireless connection.I have uninstalled and reinstalled the wifi card drivers (Atheros AR5B97 Wireless Network Adapter), disabled the power management features, and updated Win 7 64-bit.

View 9 Replies View Related

Wireless Will Not Connect At All / It Continues To Cycle Through Identifying?

Sep 2, 2012

A day ago, I was having trouble with my apartment modem, and due to a busy schedule, was only able to do a quick "Unplug and reset" which seemed to work at first, but eventually it stopped working all together. Today, I traveled from my apartment to my "home" home, where the wireless network is set at a "Home" security level. However, my wireless now will not connect at all. It continues to cycle through "Identifying" yet cannot make the connection. It works through a LAN connection however.So far, I've attempted the follow:

- run>ipconfig/all, ipconfig/reset, etc

- winsock reset

- system restore

My computer is a Samsung RC512, running windows 7. Here's the paste from my ipconfig/all:

Windows IP Configuration

Host Name . . . . . . . . . . . . : PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : hsd1.pa.comcast.net.

Wireless LAN adapter Wireless Network Connection 2:

Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter
Physical Address. . . . . . . . . : DC-A9-71-93-16-52[code]....

View 1 Replies View Related

Wireless Networks Always Identifying And Does Not Load Pages?

Aug 30, 2011

I cannot connect my laptop to any of the normal wireless networks I use.It says, it's connected with good signal strength but than it never stops "identifying" and doesn't load any pages.

View 4 Replies View Related

Wireless Network Stays As Identifying And Not Connecting

Jan 19, 2012

Where I tried to conect to my home wifi or the school's wifi and it just says "identifying" on the network connections and on the list of wifi networks around in the notification area it says "No internet acces" and can't connect to the internet. I stoped trying to look for a solution but I don't have internet at home

[code]....

View 5 Replies View Related

Connect To Wireless Router (Netgear WNR1000) It Says Identifying?

Aug 10, 2012

For a while now when I try to connect to my wireless router (Netgear WNR1000) It says "Identifying..." for a while, but then it will disconnect . My wireless only works sometimes if I reset the router every once and a while. Even then it will connect properly with my computer for two days tops. The wireless works on the other computers in the house, just not mine. I've checked all of the wireless settings to make sure they match correctly to the network .

View 14 Replies View Related

Stuck On Attempting To Authenticate - Limited Access On Internet

Jul 29, 2012

I can not connect to my wireless network from my pc. My laptop is fine. the internet worked like 5 times.. but it's been dead for two days now and everything I try seems to fail.i can see my router in connections, (sometimes not) And when i see it, it says limited acess and works for like10 mins..The OS is Windows 7 ultimate 64bit and im using a gigabyte GN-WB01GS USB WLAN card#2 network adapter. The signal strength is good. Ran all the windows trouble shooters... nothing, though it works wired. After clicking connect im told that it is attempting to authenticate forever and that is all that happens,I dont get why it works sometimes, then doesn't.when the internet works it have worked like 5 times (for 10 minutes) but now i cant even connect to it..Whenever i tried to download SOMETHING, it stopped working. And the internet i had those 5 times was were slow, not 54 mbit net. [code]

View 14 Replies View Related

Linksys Wireless Router :: EA6500 - Identifying Devices Causing High Usage?

Mar 28, 2013

I'm thinking of purchasing a Cisco Linksys EA6500. I need a router that can one monitor bandwidth used by device. Keep exceeding our ISP's network bandwidth allocation, need to identify the devices that are causing this high usage and be able to do so from the router. Does the EA6500's standard software support this, is their router software one can obtain for the unit that does this or is there another home router option that can perform this function?

View 6 Replies View Related

My Laptop Just Keeps Identifying

Sep 19, 2011

What the problem that whenever I try to connect to the internet it will forever say "identifying" and never get internet access. It is the same problem with both wireless connections and when I have an Ethernet cable plugged in. I'm sure its not the internet that's the problem because I am using the same connection right now but with a different laptop.

View 4 Replies View Related

DHCP Get Identifying Network Forever

Apr 20, 2011

Out of all the computers in my house there is one computer that does not seem to be able to get an internet connection. Usally I would fire up the computer, then unplug and put back in the wireless device and it would start working but just recently no matter what I try it will not work. When I set the computer up to connect with a static ip, i get a local connection only (or at least thats what networking centre says) and when i rely on dhcp i get 'identifying network' forever. No network settings have been changed and I have tried an ethernet connection as well which also didn't work. I have tested the wireless device on another computer and it works fine.

View 14 Replies View Related

Identifying Switches / Physical Path On A LAN?

Apr 21, 2011

I'm a network admin for a medium-sized (500-700 people) multi-site business and I have a simple question. Is there any utility or method I can use to identify the physical path a packet of data takes from a workstation on the LAN to a server on the same LAN?

For example, if I send a tracert command at google.com, I can see every router the packet touches before it gets to Google's router. Is there a method I can use to determine a similar path with switches in my internal network? If I use tracert or pathping, I only get a single hop since the workstations are on the same LAN as the servers even though I know there are two physical switches between them.

Basically, I want to send packets from a group of workstations behind a couple switches to a server and see if the packets are being lost in the switch somewhere to identify if there is a failing switch or something causing network slowdowns. map out the network more accurately so it would be useful to know.

View 1 Replies View Related

TP-Link 3G/3.75G Router :: MR3040 Not Identifying 3g Usb?

May 7, 2013

Region : Italy
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Vodafone IT

Basically, the 3g port is absolutely not working in both devices.I've tried with 4 usb 3g adapter (all huawei and listed under compatible), THEN i bought a MA180 (yes, the TP-LINK 3g usb stick) and even this is not working.The MR3040 if i connect the MA180 simply will blink the MR3040 3g led ONCE, after that it simply does nothing.if i go under the status page on 192.168.0.1 it basically says:"3g usb: Identifying.." and it still stops there for even an hour.Same on the MR3020.

View 1 Replies View Related

Home Network :: Identifying Linksys Router?

Jul 25, 2012

I've recently been on a kick of acquiring a small collection of the old school stackable Linksys equipment, and in one of my searches I came across a picture of one I'd never seen before.

View 4 Replies View Related

Laptop Identifying Network But Not Connect Fully

Jan 21, 2012

i have tried many things i have tried to reset my router with the cmd prompt i have checked my drivers i have tried the simple things and at this point.

View 1 Replies View Related

Enabling Identifying Network Cable Unplugged?

Nov 22, 2011

So here's a fresh spin (and not in a good way) on the seemingly common port-flapping issue, where a windows vista/7 machine's ethernet port vacillates between "enabling, identifying,network cable unplugged." I've tried the fixes I've seen around, like forcing the speed to 10 or 100Mb duplex,etc. But I think the problem goes deeper than that -or drivers or faulty NICs. Its acting like it's in the cabling. . . but not. Any advice would be welcome.Just switched from one DSL provider (Bell) to another (Teksavvy). Connected via a dry loop. When the Bell tech first set it up a year ago, he did it like this: Patch cord frome the Bell 2Wire modem/router combo to a female coupler. Female coupler attached to cat5 cable running about 25/30 feet along baseboards around the corner to another female coupler. Patch cord from female coupler to NIC in the back of my box. This worked fine. New set up with Tek savvy is as follows: DSL modem via patch cord to (wireless) D-Link router. D-link router connected to computer by same aforementioned setup. This results in the port-flapping named in the title of this message, on the hard line only. Any change in my computer was ruled out by connecting a brand new, never been connected laptop and the same terminal as my computer. Results in port flapping. The same laptop connected to the router by just the patch cord results in a perfect connection. I've tried moving the patch cords around, it doesn't change the results, so they're fine. I have no way of testing this long stretch of installed cable in the middle, with the couplers on it, since I don't have an equal length cable to try out anywhere, but I'd be surprised if that just died after a year's use exactly when I connected new hardware to the other end of it. Running windows 7 with a RealTek NIC on my box. D-Link router (will check the model later, at work at the moment), and TP-Link DSL modem. The system delivers wireless internet flawlessly.

View 2 Replies View Related

Cisco VPN :: ASA 5520 - CSD - Identifying Corporate Assets?

Mar 16, 2011

My company uses an ASA 5520 to authenticate VPN using the Anyconnect client. We would like to deploy a second authentication method such as Host Scan (CSD.) Our ASA is currently running on a "Plus" license. As I understand CSD will only work with "Premium?" If this is correct are there other options for two part authentication? We're also considering using FOBs and have ruled out using the NAC.

View 3 Replies View Related

Dell Inspiron 4030 Laptop Is Not Identifying The Wired Network?

Dec 21, 2012

I am having Dell Inpiron 4030. Following are specs

Quote: Quote:
Processor: Intel(R) Core(Tm) i3 CPU M380 @2.53GHz
RAM - 2.00 GB
OS - Windows 7 ultimate 32 but

I am unable to connect to the wired network. We have a 4 port prolink router and there is no error with it. I know because I am using the same cable for my laptop, which I am using for my desktop. I just unplug it from the desktop and plug it to laptop. I am unable to provide any specs from the desktop because there is an error in that computer.

However, I can give ipconfig/all data from my father's computer, which use another port of the same router.

My laptop is working perfectly with the Mobile BroadBand. And this is a dual boot computer with Ubuntu 12.04 LTS and the cable is fine with Ubuntu.

Following is the result of ipconfig/all

Quote:
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersyohan>ipconfig/all

[Code].....

View 8 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3220 Default Firmware Not Identifying Modem

Mar 22, 2013

Region : India
Model : TL-MR3220
Hardware Version : V2
Firmware Version : V2
ISP : Reliance netconnect Vendor (ZTE Model AC2736) CDM
Region : India

Just now I bought this router. When I am trying to configure it with default firmware is not identifying the modem itself. So Afyter facing this problem, I updated my Router firmware(TL-MR3220_v_2_120822) and retry the process. But this time, It identified the modem for few seconds, then its changes its trying to connecting, after that its change it state to unplugged.

View 1 Replies View Related

Cisco AAA/Identity/Nac :: 3395 - ISE Not Identifying AD Group Attributes When Using Multiple ISE

Oct 2, 2012

So we have multiple ISE Servers with differing personals. I was having an issue with our new ISE setup not identifying AD Group Attributes when using them in Authorization rules. We have 2- 3395 appliances running Admin and Monitoring/Troubleshooting Personas and 2- 3395 appliances running as Policy server personas. We are runningĀ  v1.1.1.268 with the latest two patches. I was unable to pull Active Directory Group Attributes in any of my Authorization rules. After Resyncing all the boxes with the Primary Administration box I was able to do this. There is no bug listings for this occurrence nor do we have Smartnet to call support for other reasons.

View 3 Replies View Related

Wireless :: Network Key Stuck With Old Password?

Jan 9, 2011

Can't connect to my own Wireless Network? My Gateway Laptop network key is stuck with an old password? It seems to accept new password but never does connect, and when I retry, there's the old password back again, which I don't remember and was for the other modem. Have tried deleting the Realtec Wireless Adapter and reinstalling but the old password still returns? Tried renaming Wireless Network but old password still returns? Tried accessing Registry with no luck. Only way the Laptop can access is to leave Wireless Network Open/Unsecured, but that's not an option.

View 4 Replies View Related

Wireless Card Stuck On Wep Security?

Apr 14, 2011

For some strange reason my wireless card can only connect to the router if I do not use any security or if I use wep-open. If I try to use a wpa-psk it will not connectIn the past I was able to use wpa with no problem. I am also able to view other wireless routers around me and can see the different securities they use, but if I change my router to wpa then my wireless adapter can and will not notice the change and I can not connect to my wireless router which is same brand

View 4 Replies View Related

Wireless Router Stuck With Old Password

Oct 19, 2012

The PW has been changed, I got the new one correct but upon entering it on my laptop it goes around circle showing,"Wireless network detected" and then,"Unable to connect to preferred wireless network".It never works. I don''know haw to fix this problem. It did not happen on my iPad.

View 1 Replies View Related

Wireless Stuck At Acquiring Network Address

Aug 6, 2011

i recently bought a dell mini laptop and i am already encountering problems with my wireless. i am on the laptop now, but i connected it via ethernet, and that is apparently working. whenever i hit repair it gets stuck at acquiring ip address.

View 4 Replies View Related

Wireless Stuck On Acquiring Network Address?

Oct 14, 2011

I'm running a Windows XP Dell laptop. A few days ago I completely reformatted the computer because it was just starting to run slow. I reinstalled Windows from the factory CD and downloaded the latest drivers from Dell's website. Now suddenly, after the reformat, my network connection gets stuck on "Acquiring network address." Running ipconfig shows either 0.0.0.0 or a blank space for each field.Other laptops in the house work fine.I did discover that I can get it to say "Connected" if I go into the advanced settings and manually enter an IP address and use the subnet and gateway from my desktop's ipconfig results. The problem is that I can't actually get on the internet. It just says it's "connected."

View 14 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved