Data collection runs forever (since this morning). Also an reboot of the LMS server didnt work. Checked all processes and ani.log -OK. After reboot, the time stemp for Toplogy changed from 8:00 to "Not Available"
Inventory Collection24019 Apr 2012, 12:15 CEST
IdleScheduleConfig Archive24016 Apr 2012, 16:24 CEST
IdleSchedule
i have an issue with the lms 4.2 Topology Data Collection. After installation the Topology Data Collection was running normaly, but since first server reload the Topo Data Collect under Inventory > Dashboards > Device Status > Collection Summary is "frozen".Is there any option to stop this process elsewhere? I cannot find anything under jobs in running state or so. Clicking on Schedule only give me the option to start data collection, but lms always returns that the process is running.
View 9 Replies View RelatedI have a problem with the User Tracking and Data Collection on LMS 4.0.1 . I think It crashes every time or freezes. I Have this error if I lunch UT Acquisition :
Failed to start acquisition: Construction of XML data required for UT IS in progress. Please try After Some Time.When scheduling a CM data collection, I have this error: Data collection IS Already in progress.
I detected an error in ani.log line 12266: Exception in thread "Discovery" java.lang.AbstractMethodError: com. cisco. nm. ani. server. topo. Port Channel.portIfIndex ()
I successfully changed the name of the CiscoWorks server last week with the tool hostnamechange.pl.
Perhaps there was an impact on data collection ?
we have installed LMS 3.2 when i try to run data collection it shows "Notified server to run campus data collection", but status of data collection is idle.
If i restart the server and try to run data collection it runs properly one time.
Each time i have to restart the server for data collection.
Out of all the computers in my house there is one computer that does not seem to be able to get an internet connection. Usally I would fire up the computer, then unplug and put back in the wireless device and it would start working but just recently no matter what I try it will not work. When I set the computer up to connect with a static ip, i get a local connection only (or at least thats what networking centre says) and when i rely on dhcp i get 'identifying network' forever. No network settings have been changed and I have tried an ethernet connection as well which also didn't work. I have tested the wireless device on another computer and it works fine.
View 14 Replies View RelatedI read somewhere this is to show that the connection is unstable? My modem works fine, and it works fine being plugged directly into my PC.
But going through the modem, I am noticing some drops in speed and spikes of high latency. This icon - the little earth/internet icon - has never flashed for a long period of time before. I've power cycled it (unplugged for over 5 mins) and it persists.
Does it need a firmware upgrade? Is it something I did? Faulty hardware?
I have a Dell Latitude D620 and my wireless isn't working. It worked before but then I had a malware/spyware on my computer that blocked my wifi and when I managed to get the program off, my wifi still wouldn't connect. It's not the wireless card because I bought an external one and it did the same thing. It's not my router because my other computer connects to the internet.
View 1 Replies View RelatedI was login with my "router password" to my EA4500 yesterday without problem, after I brought another EA4500 today and try to find out my existing EA4500 configuration.I just can't login..I mean it just stay forever on the "Waiting..." screen after I enter the "router password"
-no luck with changing browser, I try ie, firefox, chrome, is still the same
-no luck with other pc, I try login with another notebook or pc, is same..
-no luck with switch off, I try refresh button once, same..and try to turn it off 5 minute and try again..same
Problem: I bought my wife and I each a Gateway NV54 laptop this past year. While both of our laptops can acquire a network connection, she is able to browse the internet almost immediately, while my computer takes 30 seconds to a minute longer to connect to the same network, and then can take up to 3 minutes before any web browser recognizes the connection. This happens on every connection I make (school, work, home, etc.)Steps I have taken:
-Updated the driver for my wireless adaptor (Atheros AR5B93 Wireless Network Adapter), and nothing changed.
-Windows 7 service pack (6.1)
-Downloaded AVG, Spybot, Advanced System Care, and IObit Security and run scans in all 4 at least 3 times a week.
-Cleaned up hard drive files so that each of my two hard drives is less than 70% full.
-Removed superfluous internet connections and prioritized the important connections I use regularly.
I have an Inspiron E1705 and my wireless card/adapter takes about 3 minutes to load each log in. I called Dell, and they couldn't find out what was wrong. We tried things from internet settings, to shutting off all the start ups in MS Config. I've had this problem for a very long time. Windows will start up, and it seems like there is a 3 minute wait period of my computer doing nothing, and then finally, the wireless loads in my System Tray.
View 14 Replies View RelatedI have a Dell E4300 with a 1510 wireless mini adapter running windows 7 pro with a netgear WNR3500 router running wireless N protocol. I have my laptop setup to sleep when lid is closed. When it awakens the wireless connection will not automatically reconnect and I have to manually select the SSID and connect. It will also reconnect if I use the network troubleshooter. The problem does not happen if I reboot the PC or start from a power off situation. I have the latest Dell driver and I am running the DWLAN utility.
View 3 Replies View RelatedI have purchased a new home where cat5e was run from several locations throughout the house to the basement. Unfortunately, the runs were not marked. I know you can short one end of each cable and measure (voltage resistance?) at the other end in the basement to identify it. I need the process and equipment required so I can wire my home. The cables are not terminated.
View 11 Replies View RelatedASA has 3 interfaces: outside, inside, DMZ Average total throughput is between 20-200mbps. Majority of throughput would be between inside and DMZ interfaces. CPU never goes above 70% (and doesn't seem to spike much with respect to traffic patterns).We are seeing lots of errors on the interface. Inside output:
Interface GigabitEthernet0/1 "Inside", is up, line protocol is up
Hardware is i82546GB rev03, BW 1000 Mbps, DLY 10 usec
Auto-Duplex(Full-duplex), Auto-Speed(1000 Mbps)
Input flow control is unsupported, output flow control is unsupported
[code]....
The ASA is a VPN headend for 3 remote branches. Approximately 100 VOIP phones between the sites register to a phone server at the main site (where 5520 is).I'm baffled by these overruns and underruns.
Code version 8.2(2).I refuse to believe that I need to upgrade the firewall when a 5520 can supposedly process 450mbps (aware this is best case but our average is close to 80-100mbps) and should do 300,000 bps wheras on average we are pushing 10-15,000.Is there anything we can do to find out why the ASA is having such a hard time processing all of the packets we are sending it?
I have a server at work which an ESX server, it is running 5 VM's/OVA's and i have 2 physical workstations all hooked up to a switch. All the IP address's within the VM's/OVA are in the range 192.168.99.xx and so are the two individual workstations, they all need to be in that range to be able to communicate with each other.
View 2 Replies View RelatedISRG2 (c2951-universalk9-mz.SPA.152-4.M1.bin) has 512 MB of DRAM. Periodically it runs out of memory: [code]
1. Why "show process mean" command shows less memory than 512 MB? Processor Pool (248 MB) + I/O Pool (58 MB) ~ 310 MB only?
2. *Init* process holds more memory than normal (202 MB). What may cause this?
I setup sharePort today and attached an external 1 TB hard drive. Seems that All my internet connections are slow now. I have a seperate PC that I use VPN to connect to work with and suddenly its very slow. My wife said her laptop suddenly slowed down too. The PC that I installed SharePort software seems slow too. Is/can SharePort be dragging down the router? I turned off the external HD and it's still slow.
View 14 Replies View RelatedCisco 2811 runs ITP IOS. On that router we run the SMPP service. A client on the network connects to this service, and we need to capture the traffic for debug.
I've tried traffic-export, but I cannot see any outbound traffic. Is there any way to capture the outbound traffic?
I have had this wireless router for 3.5-4 months, and it has been working fine up until now.It either runs VERY slow and losses connection often or will not connect at all. I could be sitting beside the router or across the room with the same results. i have even tried connecting a cord from the laptop to the router, but it makes no difference. If it makes any difference we have a PS3 that is connected via wire to the modem and it works just fine, never loses connection. We have used both at the same time since we got it and it was fine up until a few weeks ago.I have tried reseting it and unplugging everything and rebooting the computer and that had no effect. I also tried reinstalling the router on the computer using the setup disk and resetting everything but that did not do anything either. I have an Acer Aspire laptop MTS ~ DSL Modem?
View 4 Replies View RelatedI recently purchased the E3200 Linksys router. Works great as long as I use IE to browse. Won't let me connect to the web with Chrome.
View 2 Replies View RelatedMy brand new E3000 runs very hot compared to other (e.g. Netgear WRT624 Super G) that I have had. It get so hot that the hard surface it is on, and the underside of the unit itself, is almost too hot to hold. Is this typical for the E3000 and also other E-series? Won't this characteristic lead to early electronics failure?
View 6 Replies View Related I just got my first WRVS4400N v2.Nothing has changed, the definition of small business means there are USUALLY one office, and several people runs around thus the need of a VPN server sitting at the home office Router. I think most of us small business operators had wished for a connection away from office, NO REMOTE GROUPS, just clients on phone, or laptop. Using this connection to get to some files which isn't sitting in the cloud, or perhaps using it to hop over firewall restrictions that some overseas countries had imposed.
What you should have is a setting for Stand-alone VPN server, NOT Router to Router.. What you should have is feature that generates the various psk for different platforms. What you should have is made things simple, instead of these magicabbage which goes no where for the small businesses.Through out this thread the original poster is presenting the same problem, he and I don't have a Remote Group router to enter an IP address, tell us to use the QuikVPN client DON'T work, the Server isn't UP to begin with!Moreover, the VPN client installer on the this new v2 runs only in Win 2000 or XP??? What the (*&^! Doesn't seem like a large business like Cisco should have in their boxes.
After launching config collection job in LMS 4.2 I can't get job results and receive error message - Unable to get results of job execution for device. I've increased the job result wait time using option in Admin > Collection Settings ... , but nothing changed.Here are screenshots of error message and wait settings I used.
View 3 Replies View RelatedI have an HP-MINI with an atom processor 1.6ghz and dual core according to device manager. It has 1 gb ram and no other issues. I can boot into Ubuntu and have everything work fine. It goes on line with no prodding on WAP after I enter the password as usual.
When I attempt to do this in winXP on the same exact computer, it comes up with the no connectivity issue. I have run ipconfig and here is the result: (btw I am sending this info from another computer)
Windows IP Configuration
Host Name . . . . . . . . . . . . : KEN_HP_MINI
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
[code]...
After I ran this see that Netbios over TcpIp was disabled. I am sure it is supposed to run in some kind of automatic mode or something as I recall.
I have an SMCWBR14S-N4 router, and I'm using a usb wireless adapter that says it supports n, and promises speeds of 150 mbps. My signal strength is excellent, yet my speed is only 54 mbps. This is the only wireless connection on my network, I have 2 PCs connected at 100 mbps, and a Dish DVR connected at who knows what speed.
I've been trying to read questions and answers from others online, and I keep reading that ISP speed plays a role. How does my ISP's speed affect my wireless network's speed? (Plus, I run speedtest.net all the time and my download speed is usually 260 mbps.)
But my question is simply why is my speed so low and what can I do about it?
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: AMD Turion(tm) 64 Mobile Technology ML-34, x86 Family 15 Model 36
[Code].....
I am using my Iphone 5 as a personal hotspot at home. It gets LTE so my speed is very fast as compared to satellite service from HughesNet. My laptop downloads at 12 mbs and uploads at 5 mbs versus satellite which is about 1 mbs. However, I installed a Linksys N300 usb adapter on my wife's workstation and it is actually slower than 1 mbs. The workstation is about 4 years old running on Vista. I have tried the usb adapter in all four usb slots with no change in performance.
View 3 Replies View RelatedOur customer is try to make a configuration by web interface menu:
Admin > Collection Settings > Inventory
After select the menu below they always received this message:
Error in starting acquisition: unable to connect to server
After I upgrading all device packages, inventory collection failure to complete. All devices stuck on pending state and at the end of the job all devices are under not attempted and job result description ses " Timed out. Make shure that ICServer is running". I made sure that ICServer is running.
LMS runs on windows 2008 R2 server
I have Cisco Works LMS 4.0 on Win 2K8 64 bits on VMware EXs. I am facing issue with reference to Inventory Collection, my 10% devices (including Routers & Switches) Inventory collection is failed and give me error (Device sensed, but collection failed). I increase the SNMP timeout 10 sec, 30 sec, 60 sec and even 100 sec the result be the same.
View 1 Replies View RelatedA customer of mine have 2 VSS systems for wich IC times out during collection when trying to read from flash on them. From the ICserver.log
[ Thu Dec 13 16:45:19 CET 2012 ],WARN ,[Thread-20],com.cisco.nm.rmeng.util.logger.XDILogger,67,com.cisco.nm.xms.xdi.pkgs.SharedInventoryCatIOS.FlashAGI_CISCO_FLASH_Mib,g$eval,70,com.cisco.nm.xms.xdi.pkgs.S
[Code].....
I'm having an issue with LMS 4 where it's failing to collection configuration from devices.
The following is the status of your Scheduled Config collection job:
Job ID : 1045
Status : Job Failed(111)
Description : System config collection job
[Code]....
I researched through this forum and found a thread where the ConfigMgmtServer server wouldn't run. Looking at the processes it says that this service is running normally.
LMS 4.0.1 installed on Windows Server 2008 R2 Standard with SP1. Created Inventory collection job, but couple of hours later, it is failed with all devices Not Attempted. Increased SNMP timeout on 10 sec, started again for only 1 device - collection failed again. I am attaching pdshow and ICServer file.
View 6 Replies View RelatedThere are 2 XBox's in the house and 1 is downstairs wired into the WRT320N Router. The upstairs XBox is running wirelessly through the router. Each of the XBox's work fine playing Modern Warfare 3, when only one is playing, but if both of us are playing, the wired connection works great, while the wireless connection is really slow and laggy. Again, the wireless XBox runs fine as long as the wired XBox isn't also playing MW3.
View 9 Replies View RelatedI'm going to be running CAT6 throughout my house (once I figure out all the paths and buy the cable) with the home runs going to a patch panel in the basement.
I've been wondering if I should terminate each cable with a male RJ45 end and use a patch panel with RJ45 female-female keystone couplers or; terminate each cable with a female RJ45 keystone jack and snap it into a keystone patch panel.
I'm just wondering if there are any pros and cons to each, each method seems to be exactly the same, just buying different pieces.