Difference Between Leased Line And DSL Line
Mar 27, 2012
The reason is i want to know the difference between the leased line and the DSL line. The whole thing behind the confusion is, We plan to have a high speed internet connection in our office. We will don't have a branch office or some thing like that. I preffered to have high speed internet in our office. I found in some website that Lease line will have high speed connectivity(Upto 10Gbps). Can i use the lease line or DSL is enough for our office. Our office contains of 82 user who will use internet.
View 2 Replies
ADVERTISEMENT
Mar 31, 2011
my company has a 4mbps leased line from TTSL . we are getting 2 WAN IP and 2 LAN IP. in Addition we are also getting 12 additional IPs .-what is additional IP, their uses?-how are the 2 wan ips configured? & how they are distributed in network? -is 1 IP from the ISP sufficient if i have a 1:1 internet bandwidth connection?
View 9 Replies
View Related
Dec 28, 2011
I got following IP address from BSNL to configure Internet leased line.OFC cable was terminated at our premises. it has to connect Ethernet port.Say eg.Wan IP : 192.168.1.6 255.255.255.252Public address pool : 172.168.10.6 to 12if i configure one address on Ethernet port1 as nat outside 192.168.1.6 255.255.255.252.the ip address given for wan & pool are different.Then how can i configure pool and how to configure nat inside eg 185.168.10.1 to 255the above ip are not actual ips just given for example.
View 6 Replies
View Related
Aug 3, 2012
I have a cisco 2911 set up at one of my sites and it is configured with sub-interfaces as this provides a default gateway to each of the offices.I have just had a 100mb leased line put in and i have a couple of questions regarding the config.let me start by telling you how it is set up .I have 3 HP Procurve switches connected together then that connects to the Cisco and the Cisco connects to a Zywall
HP Switches > Cisco 2911 > Zywall > Internet
We are wanting to remove the Zywall and connect the Cisco to the Leased line box
HP Switches > Cisco 2911 > Leased Line > Internet
The config of the cisco is
G0/0 - is up but no cable connected as this holds the sub-interfaces
G0/1 - Connects the Zywall - 192.168.1.1 (this has firewall rules to forward traffic through)
G0/2 - Leased Line
The way i have configured the sub interfaces is with its own DHCP pool and default router, some of the offices have there own ADSL router and hold there own Internet connection and the default gateway for that is 192.168.xxx.253 and the offices that use the Cisco use default gateway of 192.168.xxx.254
Now my question is how would I move everyone onto the Leased line and get rid of the Zywall ? Would it be as simple as giving the leased line an address and put in a static route to forward all traffic through that connection ? Or am i missing a trick or 2.
View 2 Replies
View Related
Jul 29, 2012
How to configure leased line from the ONT connection on Cisco 1841 router . there have public IPs on the interfaces fa0/0 & fa0/1.
View 4 Replies
View Related
Feb 4, 2013
Leased line is between dammam to dubai and the dammam office is getting internet from dubai.The ip address of Dammam office is class A (Public IP) x.x.x.x and for dubai it is y.y.y.y which we are using as proxy for accessing internet.I purchase the local DSL direct line connection through cable from Local Provider and this ip address range is 192.168.1.0 - 192.168.1.254.Is it possible to use the DSL line as failover, so if one line goes down the user should remove proxy and can use local internet.The router which is using is cisco 1800.
I believe that failover is possible, 100%, but would like to know how I can do it and requesting for sharing more inputs about failover in this case.
View 2 Replies
View Related
Jul 15, 2011
I am going to design one network. I had queries with this design.Let me explain scenario first( it was attached below).I have two sites, Site-A and Site-B, repectively.
In site-A i have one Cisco 1841 router, one Cisco ASA 5510 firewall and One cisco 3560 layer 3 switch.
in site-B i have one Cisco 1841 router, one Cisco ASA 5505 firewall and One Cisco 3560 layer 3 switch.
From ISP side
I have point-to-point leased line between sites A and B. And both sites have internet connectivity from another ISP.
I planned to terminate leased line in cisco 1841 router in both branches for branch to branch connectivity.
I will configure site to site VPN between two sites, A and B.
Here my query was i want make VPN as failover connectivity if leased line fails. In both the cases, i need internet to the inside users in both sides.
Summary requirement:Leased line is Primary and VPN is Back-up, if leased line fails. In both cases internet is needed to inside users.
View 3 Replies
View Related
Feb 16, 2012
I have two sites connected via 2901 routers to a head end with an ASA 5510, the WAN circuits are LES running at 100MB and at the head end we have a 100MB leased line. All WAN circuits are provided wires onlyby another supplier. I have setup the two 2901 routers with inside IP addresses on GE0/0 and a /30 subnet for the GE0/1 interfaces to the ASA over the LES circuit.
The LES circuits are set to 100MB but the problem I am having is that one of the 2901s will only negotiate at 10MBps Half Duplex with the ASA at 100MB Half Duplex, the other will negotiate at 100MBps Full Duplex at both ends. My WAN provider tells me both LES circuits are the same so I cannot work out why one will negotiate at 100MB Full and the other at only 10Mb Half.
At the head end I have and ASA 5510 connected to the WAN providers 100MB circuit but testing from my end sites I can only get 6MB download and 0.5MB upload on an Internet Speedtest.
I used Wireshark when downloading from my end sites and I can see lots of TCP retries and duplicates so I think this is a duplexing issue, my question is, my WAN provider is stating the issue is nothing to do with them and it is my 2901 and ASA that is at fault, they state if they connect a laptop to the LES circuit and then their leased line they get 100MB up and down.
View 4 Replies
View Related
Feb 7, 2012
I am a total new comer for Cisco Router. All I know is plug the console cable to a serial port on a PC, fire-up HyperTerminal to view and that's it. I don't know any command or scripts.
I am trying to setup my client connection, I already receive the required configuration settings from ISP. It is a Leased Line Serial connection.
How to setup the router with the below configuration.
Serial IP : 1.X.XX.222
Serial Netmask : 255.255.255.XXX
LAN IP : 1.X.XXX.1 to 1.X.XXX.31
LAN Netmask : 255.255.255.XXX
[Code] ....
View 5 Replies
View Related
Oct 3, 2012
What are the commands for Configuring Cisco 1921 Route's Gigabit Port G0/0 or G0/1 for Leased Line termination having Ethernet Hands Off
Modem Provided by ISP (BSNL ) is CTR-U
View 10 Replies
View Related
Oct 11, 2012
We plan migrate an old existing WAN architecture based on legacy data serial links. These links will be consolidated on a E1 channalized card.
My question :
Is the HWIC-2CE1T1-PRI need a PDVM DSP ressources on router to oparate for data leased lines or no?
The VWIC3-1MFT-T1/E1 will be used for the backup dial in ISDN connexions? this type of cards a PVDM DSP ressources for data connexions or no?
ISR router are 2911.
View 5 Replies
View Related
Feb 20, 2012
I have configured cisco 1751 router for internet with nating. Internet browsing working fine. But We have polycom hdx 6000 conference system to connect from remote site.
1. While calling remote ip it is ringing and connecting but not displaying any thing on the screen but their side is displaying.
2. When they call our side ip it cannot connecting.
I have connected netgear router then video conference is working fine (with out port forwarding also). If I configured that router between 2 local sites (not on internet line) its working fine where i did not configured any thing just given routing. Configure same situation using internet leased line.
View 1 Replies
View Related
Jun 11, 2012
We have configured ASA 5510. We have configure Ethernet 0/0 ( Outside ) connected with ADSL line and Ethernet 0/1 ( Inside ) Local LAN. we have configured NAT and all the traffic is passing through outside interface. Now we have connected ethernet 0/3 ( leasedline ) interface with static public IP. Now we want to allow SMTP traffic to pass through from this interface.
How to configure it if we want our local lan SMTP traffic sending through new leased line ( Static Public IP ).
View 2 Replies
View Related
Oct 10, 2012
Cisco 2500 series access servers show line usage with the "show line" command:
View 2 Replies
View Related
Oct 4, 2012
how T line contributed to voice transmission.
View 4 Replies
View Related
Jun 3, 2012
How do I plug in a LAN line
View 1 Replies
View Related
Mar 16, 2011
We have a barn that is quite a difference from the house and would like to add a router out there also, since all our animal sales are done from that point. We just have one phone line for the house and for the barn.
View 2 Replies
View Related
Jul 10, 2011
this occurs when I am checking my email,and it blocks me what can I do?
View 1 Replies
View Related
Apr 22, 2013
We have approximately 20 users on our LAN, i need to connect a Diginet line that a client has installed that we have a "dedicated" connection to them, we have got an ADSL router that is connected to the lan for internet connectivity, and we need to access the client specificallly via the Diginet line.
View 1 Replies
View Related
Sep 13, 2011
omputer A connects to modum A thru phone line that needs to stay active for a system to operate. Computer B connects to modem B always using the same phone line a few times a month, what device will alow each computer to know and go to its modem, dialing in on one phone line for two modems, and resting in primary state for system A to operate as a Dialer.
View 5 Replies
View Related
Dec 26, 2012
So i have the virgin 100Mbps package but am only getting about 30 Mbps of this on my computer. I know that we are getting the full speed, as that i have downstairs (directly connected to router) is able to get 100Mbps.The computer that is only getting 30 Mbps is connected to the router (Virgin superhup) through the use of powerline adapters to give me a wired conenction from my room down to the router as we are unable to find a cable long enough to procide a direct connection (without drilling holes through our house and having it hang places)[CODE]
View 6 Replies
View Related
Jul 31, 2012
I just got those TrendNet 500Mbps powerline adapters. Testing with CrystalDiskMark on a laptop to a remote SSD drive I get the following results. Notice that those are megabytes. [code]
View 2 Replies
View Related
Dec 28, 2011
We have multiple computers (most Win7), game console, iPad,iPod etc on our network, networking was really never a problem.We switched a few weeks ago to mobile Internet, which uses the Netgear MBR1210 modem/router as network access point for all devices. All network users, except two or three, are wireless. Prior to getting the mobile Internet we were on Satellite ISP and used the Linksys 3200 router as access point/network router for our home network (behind the ISP modem).The Netgear modem/router is too far away from my work area in the home, things like my printer, a desktop tower need to be plugged into a router because they are not wireless. The plan is to have the netgear router set up just as a modem/server, turn the wireless off on it, pull one network cable to my Linksys 3200 and use the Linksys as network access point for all devices. Which settings do I have to have on each router to do this? Where do I plug the network cable in between the routers? Do I go from a Lan port on the Netgear to the Wan port on the Linksys?
Which IP settings do I specify? How do I turn the automatic configuration of the Linksys off? Needless to say, I'm a bit lost here. I had contacted a Netgear forum prior, they gave me a little picture on how everything should be hooked up and the settings, but the Linksys router just did not want to work with these settings at all. Secondly, because of all this screwing around with the settings of the Linksys.I uninstalled the cisco connect program for the linksys and removed the original network we had with the linksys. Now the program refuses to install again, cisco connect that is.
View 2 Replies
View Related
Feb 20, 2011
I'm running web server on Linux Redhat when i run
# /etc/init.d/tomcat status
I got a number of lines:
warning, got duplicate tcp line
warning, got duplicate tcp line
warning, got duplicate tcp line
warning, got duplicate tcp line
Tomcat running in normal mode Also , I can see that Tomcat unstability makes some strange behaviour in the system overall.
View 3 Replies
View Related
Apr 14, 2011
My grandma has a PC with Windows XP, she uses it only for Skype calls. can go in to her PC using command line from my PC? What commands should I use and what modifications to do on my grandma's PC? Should I ask permission from grandma's ISP (which is the same as mine)?
View 3 Replies
View Related
Dec 3, 2012
I currently have DSL and I have my router connected to the phone line in my home office and have 3 computers (2 business & 1 gaming) connected to the router via ethernet cable, works great.What I want to do is take the gaming computer to the game room in the basement and hook it up to the internet down there. Since it's a gaming computer I want to connect it to a router with ethernet cable for the fastest possible upload and download speeds (I do not want to use WiFi because I play flight sims and FPS and WiFi is too slow/laggy for online play).
1. Can I connect a second router into the phone/DSL line in the basement then hook up the gaming computer to the second router and get internet access like I have in the home office?
2. If I ran an ethernet cable from the home office router to a second router in the basement, would the long length of the ethernet cable adversely affect the connection speed (bit rate) of the second router? (would I get slower internet access in the basement?)
View 2 Replies
View Related
May 9, 2012
Would one phone line be able to support two ISPs? The rest of my family is using an AT&T line and I'm less than amused with it's performance for 4+ people. I have an unused phone jack available but I'm concerned about ordering the installation package only to find that I need a new phone line)
View 4 Replies
View Related
Feb 2, 2013
I usually use the router supplied by my ISP in one room in the house which is where I use all my.computer stuff as I am the only one who uses the internet in our house. However, my sister is round at the moment and the crap router cannot reach her room or the lounge.I thought I would be able to connect a spare router to a phone line port in the lounge with the correct settings along with the original router. However, if one router works, the other stops working. Only.one router will connect to the ISP at any time, I want both to so that we can all use the internet.
View 16 Replies
View Related
Mar 21, 2012
how to use two routers on one phone line 5 miles apart?the phone co put an off premisise extention in two of my houses miles apart they said i could use the dsl at both location but would have to take my router back and forth can antbody tell me how to set up two routers on the same phone line in laymans terms and can both be used at the same time
View 10 Replies
View Related
Sep 21, 2012
how can i fetch (feed) the internet from Network2 to Network1? so that the wired pc can access ADSL#2
Network1 (home): wireless Router connected to ADSL#1, with 2 wired pcs
Network2 (neighbor): wireless Router connected to ADSL#2 (this network is only accessible by wireless in one room, i can't take a cable from this router)
View 2 Replies
View Related
May 5, 2011
One of my branch offices is connected to an ADSL line as well as a VDSL line.Since I really don't need the ADSL line I came up with the idea to use it as a backup line.So I searched google and found this nice little article URL. I wonder if the router will switch back to the primary ISP if the primary line comes up again?
View 3 Replies
View Related
Jan 23, 2011
I have two networks with two different external IP address, of course I have two routers where separate PCs are connected.
My question is if is possible to run with the adapter like DHP-342 or DHP 200 this two LANs over power without conflict?
View 1 Replies
View Related
May 25, 2011
We are having issues transferring a 200GB VHD file across our point to point without being corrupted in the process. Any good application for testing the line quality across the point to point?Preferably we want something free, but if there is an in depth tool that costs money, we are open to that option as well.
View 1 Replies
View Related