Cisco :: What Is The Different Between T And T1 Line
Oct 4, 2012how T line contributed to voice transmission.
View 4 Replies
ADVERTISEMENT
Cisco :: Line Usage In Case Of Show Line On 2500 Series?
Oct 10, 2012Cisco 2500 series access servers show line usage with the "show line" command:
View 2 Replies View RelatedDifference Between Leased Line And DSL Line
Mar 27, 2012The reason is i want to know the difference between the leased line and the DSL line. The whole thing behind the confusion is, We plan to have a high speed internet connection in our office. We will don't have a branch office or some thing like that. I preffered to have high speed internet in our office. I found in some website that Lease line will have high speed connectivity(Upto 10Gbps). Can i use the lease line or DSL is enough for our office. Our office contains of 82 user who will use internet.
View 2 Replies View RelatedCisco WAN :: 876 To Use It As Backup Line
May 5, 2011One of my branch offices is connected to an ADSL line as well as a VDSL line.Since I really don't need the ADSL line I came up with the idea to use it as a backup line.So I searched google and found this nice little article URL. I wonder if the router will switch back to the primary ISP if the primary line comes up again?
View 3 Replies View RelatedCisco :: FastEthernet0/0 Is Up / Line Protocol Is Down
Jan 26, 2013I was working on a problem the other day and came across something that I had seen before but never given much thought. I had a router with a switch connected to it and the interface was showing as Ethernet0 is up, line protocol is down. The problem in the end turned out to be a cable that had fell out because it was not connected correctly, but I was able to replicate this interface status on a router (FastEthernet0/0 is up, line protocol is down), and NO cable was attached to the interface.I've had a look on the internet but cant seem to find a good answer, so does anybody else know why this status is shown on the router? Remember, NO cable is connected to the interface so it isn't a speed or duplex problem
View 5 Replies View RelatedCisco WAN :: 7200 - Clear TCP Line VTY X
Feb 24, 2012I ran across this today on a 7200 that when all the vty lines are filled, and dont release, you enter clear line vty x and it is supposed to release the line. Well in some versions it doesn't work.
Here is the work around I found. clear tcp line vty x
Cisco :: BVI1 / Line Protocol Is Down?
Sep 7, 2009how to bring this interface back up? It's a 1252 with 80211.n.I started configuring it with CLI and then was using the web interface. I made a change on the web interface and it caused the AP to hang. I rebooted it and can access via Hyperterminal, but I cannot ping the IP address nor bring it up in the web interface any longer.I tried the "No shut" command in the BVI1 interface.
View 4 Replies View RelatedCisco WAN :: OC-24 Throughput Through Private Line
Nov 22, 2012we have one OC-24 private line between our data centers. we are looking to get best throughput but we get max. avg throughput of 300Mbps with peaks of 800Mbps throughput. i.e. we transfered 2TB of data over this link and we got average throughput of 300Mbps with peaks of 800Mbps.
we should at least be getting 800Mbps throughput since we have OC-24 (1244Mbps) private line. we contacted our ISP but they said there isn't any problem in private line from ISP side. what can we do to increase average throughput?
Cisco WAN :: Default Line 2 In 1941?
Mar 11, 2012I was wondering about the folling witch i found in a Cisco 1941 running config
View 2 Replies View RelatedCisco WAN :: 877 - ADSL Line Drops
Nov 8, 2010We have a fairly major problem with some of our Cisco 877 units (5 in all). All are running 15.2(2)T2 in order to make use of zone-based firewalls and virtual reassembly, and all are exhibiting the same problem. When our ADSL line drops this si shown in syslog
2010-11-09 01:03:06 Local7.Info 192.168.7.1 4733: Nov 9 01:03:05.707: %FW-6-DROP_PKT: Dropping tcp session 192.168.7.2:25 109.224.142.52:41799 on zone-pair OutsideToInside class cm-MainServerServices due to RST inside current window with ip ident 02010-11-09 01:04:06 Local7.Info 192.168.7.1 4734: Nov 9 01:04:05.946: %FW-6-DROP_PKT: Dropping tcp session 192.168.7.2:25 109.224.142.52:41809 on zone-pair OutsideToInside class cm-MainServerServices due to RST inside current window with ip ident
[code]...
The "no retrain. sleep 20 seconds" messages continue forever more until somebody power-cycles the router - which is a bit inconvenient as two are 300 miles away. Surprisingly, our event manager applet isn't triggering the reload either, which defeats the object.
Cisco WAN :: VDSL Line Goes Down IOS 15.1 887VA
Jun 17, 2012I'm facing an issue since 2 month now , no one is able to tell me what's going on. The line goes down suddently for 2 or 3 minutes and this happens everyday at the same range (~2 or 3 hours) of time . I don't have any scheduled task to cause this. ISP in his side has also made some tshoot but found nothing and is convinced that the problem is coming from our side :
Here is some log :
Cisco IOS Software, C880 Software (C880DATA-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)
rtr-Id#show debugging
Generic IP:
IP packet errors debugging is on
IP NAT ERROR debugging is on
PPP:
[Code]...
How To Plug In A LAN Line
Jun 3, 2012How do I plug in a LAN line
View 1 Replies View RelatedPut Two Routers On One Dsl Line?
Mar 16, 2011We have a barn that is quite a difference from the house and would like to add a router out there also, since all our animal sales are done from that point. We just have one phone line for the house and for the barn.
View 2 Replies View RelatedCisco :: 2911 Connecting To A Leased Line?
Aug 3, 2012I have a cisco 2911 set up at one of my sites and it is configured with sub-interfaces as this provides a default gateway to each of the offices.I have just had a 100mb leased line put in and i have a couple of questions regarding the config.let me start by telling you how it is set up .I have 3 HP Procurve switches connected together then that connects to the Cisco and the Cisco connects to a Zywall
HP Switches > Cisco 2911 > Zywall > Internet
We are wanting to remove the Zywall and connect the Cisco to the Leased line box
HP Switches > Cisco 2911 > Leased Line > Internet
The config of the cisco is
G0/0 - is up but no cable connected as this holds the sub-interfaces
G0/1 - Connects the Zywall - 192.168.1.1 (this has firewall rules to forward traffic through)
G0/2 - Leased Line
The way i have configured the sub interfaces is with its own DHCP pool and default router, some of the offices have there own ADSL router and hold there own Internet connection and the default gateway for that is 192.168.xxx.253 and the offices that use the Cisco use default gateway of 192.168.xxx.254
Now my question is how would I move everyone onto the Leased line and get rid of the Zywall ? Would it be as simple as giving the leased line an address and put in a static route to forward all traffic through that connection ? Or am i missing a trick or 2.
Cisco :: Missing Letters On Command Line
Mar 11, 2013My 3550 is always 2 characters short on the command line. So my global configuration mode will look like this:Switch3550(config Say I wanted to enabled ftp, it would look like:Switch3550(config)# ftp enab.
View 2 Replies View RelatedCisco Security :: ACL Ipv4 And Ipv6 On Same Line Vty?
May 2, 2012I've just want to confirm if I can protect a router (telnet and ssh) putting 2 ACL's (one IPv4 and other IPv6) on the same line vty. Something like:
line vty 0 4
access-class hostsIPv4 in
ipv6 access-class hostsIPv6 in
Do I have to use named ACLs?
Cisco WAN :: SPA3102 - To Configure / Hijack Line RTG Via LAN
Dec 18, 2010I state that I'm very fast Voip router configurations, the problem is as follows: I need to configure a SPA3102 so that I hijack a line RTG via LAN / WAN or on a SPA2102 in the motion that the 2102 can receive and make calls.
View 4 Replies View RelatedCisco WAN :: MIB For Monitoring 6500 Line Card?
Dec 6, 2010Im looking for MIB for monitoring 6500 line card from availability prespective;
View 1 Replies View RelatedCisco Switches :: SG 300 Command Line Setup?
Aug 13, 2011Im trying to get my head around my new cisco SG 300 switch. I have used the Linksys SRW range before and configured it using teraterm and method described in the link below:
[URL]
As im fimilar with this method and the commands ideally I'd like to use this on the SG 300 range as well. Failing that, is it possible to use another method which uses the same commands which can be easily copy and pasted for setting up multiple switches with the configuration?
Cisco WAN :: 1841 DSL Line Security Config
Dec 18, 2011I configured a 1841 router that connects to a DSL modem. This DSL connection is our Internet connection for vendor and IT testing. I have connectivity to the Internet using nat and have configured the router to act as a DHCP server. It seems to be working fine. I just want to configure some best practices for securing the device from the outside access. Is there some standard best practices I should be configuring?
View 2 Replies View RelatedCisco WAN :: Different Voltage In Line Card Ws-6704?
Apr 24, 2011I see differrent voltage in line card ws-6704. Iam afraid of something went wrong with my 6500 switch. two 6500 switch is redundant.
View 3 Replies View RelatedCisco WAN :: Cannot Dial Out From ISDN Line With 1812j
Jan 11, 2011Now I am tring to setup Cisco 1812j with ISDN Line.
Here is what I connect the device. (I am in Japan)
ISDN Line (NTT east) >> DSU(NTT east INS Mate V30Slim with S/T port) >> Cisco 1812j(S/T)
On DSU setting I enable DSU and Disable Terminator.
First of I would like to test outbound call. Here is the config.
interface BRI0 ip address 192.168.92.2 255.255.255.0 encapsulation ppp dialer map ip 192.168.92.1 name Router1 broadcast 080********(Cell Phone Number) dialer-group 1 isdn switch-type ntt isdn point-to-point-setup ppp authentication chap ppp chap password 0 CISCO ip route 10.92.0.128 255.255.255.248 BRI0 192.168.92.1
Then I test by ping with #debug dialer. #ping 10.92.0.129
And I could not receive a call by my cell phone landline either.
Here is the debug.
[Code]....
Cisco Firewall :: ASA 5540 / Nat Line Removed From 8.4(3) To 8.4(4) 1?
Sep 23, 2012we have noted the automatically removing of the only "nat (inside,any)" line, during the upgrade of ASA 5540 from 8.4(3) to 8.4(4) 1: why ?
View 1 Replies View RelatedCisco WAN :: 6506 OC3 Troubleshooting Line Up Protocol Down
Jan 21, 2013I'm replacing a PA-POS-OC3-SM with PA-POS-1OC3 in a flex Wan module (WS-X6582-2PA) in Cisco 6506 using WS-SUP32P-GE PISA.I have a hard time bringing the "protocol up. the status I see is line up and protocol down. Debug shows (attached) no comunication with the edge router but when i put the older PA (PA-POS-OC3-SM ) back evertything works fine and older PA has been running for many years without the issue. I'm replacing older PA is becuase this is going EOL. I had opened a TAC case but the TAC engineer added no value. [code]
View 2 Replies View RelatedCisco WAN :: 12406 Line Card Can't Be Online
Jan 3, 2012[code]...
Primary clock is CSC 1 Board State is Waiting to retry download after persistent failures (RTRY WAIT) Insertion time: 00:00:16 (13:54:07 ago)
Cisco WAN :: ADSL Line Do Not Activate With 1801
Oct 9, 2012ADSL line do not activate. Telco Confirmed Like is Okay . They have tested no issue observed. Router replaced but did not work. Supspecting Firmware not compatible with telco . Not sure how to confirm on this.
sh ver
Cisco IOS Software, C180X Software (C180X-ADVIPSERVICESK9-M), Version 12.4(4)XC7, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2007 by Cisco Systems, Inc.
Compiled Tue 31-Jul-07 20:24 by alnguyen
ROM: System Bootstrap, Version 12.3(8r)YH8, RELEASE SOFTWARE (fc2)
XXXXXXXXXXXXXXXXXXXXXXX uptime is 30 minutes
System returned to ROM by reload at 18:48:26 UTC Wed Oct 10 2012
System image file is "flash:c180x-advipservicesk9-mz.124-4.XC7.bin"(code)
Cisco WAN :: Unable To Clear Line Vty On 7609
Nov 16, 2012I cannot eliminate the lines vty in my Cisco 7609 router when I write show users, I obtain the following thing: [code]
View 2 Replies View RelatedCisco VPN :: ASDM 6.4 Command Line Delete Vpn Key
Apr 22, 2013I'm an ASDM 6.4 command line novice & I'm looking for the command to delete an unused vpn key, e.g. 'key1'.Or if there's a GUI method?
View 2 Replies View RelatedCisco WAN :: 1800 - Use ADSL As Backup Line?
Jun 27, 2012Site A, site B, site C, site D is connected using leased line each other. We are using Cisco 1800, 2800 and 2900. Each site also have Internet connection using ADSL connected to firewall, we are using pix 501 and ASA 5510.My question is, can i use the existing ADSL line to be use as a backup line if the leased line is down on any of the site??
And i want it to trigger itself, once the leased line is down, the firewall UP the backup line? something like that..
Stack Overflow At Line 1
Jul 10, 2011this occurs when I am checking my email,and it blocks me what can I do?
View 1 Replies View RelatedHow To Connect Diginet Line To LAN
Apr 22, 2013We have approximately 20 users on our LAN, i need to connect a Diginet line that a client has installed that we have a "dedicated" connection to them, we have got an ADSL router that is connected to the lan for internet connectivity, and we need to access the client specificallly via the Diginet line.
View 1 Replies View RelatedHow To Use One Phone Line On Two Modems
Sep 13, 2011omputer A connects to modum A thru phone line that needs to stay active for a system to operate. Computer B connects to modem B always using the same phone line a few times a month, what device will alow each computer to know and go to its modem, dialing in on one phone line for two modems, and resting in primary state for system A to operate as a Dialer.
View 5 Replies View RelatedOnly Getting 30Mbps From 100Mbps Line?
Dec 26, 2012So i have the virgin 100Mbps package but am only getting about 30 Mbps of this on my computer. I know that we are getting the full speed, as that i have downstairs (directly connected to router) is able to get 100Mbps.The computer that is only getting 30 Mbps is connected to the router (Virgin superhup) through the use of powerline adapters to give me a wired conenction from my room down to the router as we are unable to find a cable long enough to procide a direct connection (without drilling holes through our house and having it hang places)[CODE]
View 6 Replies View Related