I am trying to switch my droid 2 global from verizon to t-mobile. Verizon will not give me the code however because I dropped the service after about three months of dramatic over/uncessary charges and fees.
View 1 Repliesneed lock codes to unlock my sons phone
View 1 Replies View RelatedI need to unlock my huawaei u8180 to accept sim card other than the branded one.
View 1 Replies View RelatedMy laptop DELL 1012 is attached to the operator AT & T, which in Russia is not working. I'd like to get a PIN code to unlock the modem with the ability to work with other operators. How I can do it? [code]
View 1 Replies View RelatedI have a DROID X2 and a HTC DROID Incredible can I use wireless wi-fi connections directly through my BN450D router or do I have to go through my computer to hook up..
View 1 Replies View RelatedWhen I try to connect to my Motorola Droid 2 cell phone--using my home network--it just cycles between "obtaining IP address" and "remembered.secured with WEP", then back to "obtaining IP address", etc.I have connected in the past with no problem, so it had the password in the phone, but I followed the troubleshooting advice at the Droid 2 site and "forgot" that contact, and reconnected, reinputting the password. Still the same thing.
View 2 Replies View RelatedI have been searching through the cisco docs for a while and i just cant seem to find this info. Can I run aironet 1600's with my wism running 7.0.116? Also, could I run my 1130 series ap's with a wism2? Basically, what is the minimum code level for a lightweight 1600, and what is the maximum code level for a lightweight 1130?
View 3 Replies View RelatedI have a 3G USB Dongle.I want to unlock it so that I can able to use on any network and any affordable data plan !!is it really works if we unlock it ?
View 5 Replies View RelatedFor several days, I have not been able to access any Wordpress.com websites and my blog is located on Wordpress. I can access every other website on the internet. I live in Nicaragua and my ISP is Intel. Everyone else can access my blog, however I am blocked from all wordpress.com sites. I can access my blog through a free proxy service, so I know my blog has been blocked. If I change my IP by paying for a proxy service?
View 3 Replies View Relatedi have a netgear n150 router and the lock light is on.
View 1 Replies View RelatedWhat is actually happening when we unlock a wireless 3g usb modem using it imei number and unlock code?
View 1 Replies View Relatedhow to unlock the config tab in packet tracer?
View 1 Replies View RelatedI am trying to connect a Westell 327W to a linksys etherfast cable/dsl router to support my new Kindle. The Kindle recognizes it but is unable to connect.
View 3 Replies View RelatedI have one Cisco wireless router, i forget the password now how to unlock the password.
View 1 Replies View RelatedHow to unlock EC156 HSIA USB stick for work with GSM SIM?
View 1 Replies View RelatedI have a computer through my old school and i still cant get into the main part of the computer to change my password etc; How do i unblock it?when i click it, it says; please contact system administration but i cant and they wont tell me.
View 1 Replies View RelatedI want to unlock my data Card Vodafone K-3770Z
View 1 Replies View RelatedI cannot remember the password to my Belkin Router and cannot get the reset button to work.
View 1 Replies View Relatedi have cisco router 1811 , i make port forwarding for my mail server , so from outside i can access to the mail server via my mobile but inside lan i cannot because i use my global ip address at my mobile config .
View 12 Replies View RelatedI am having issues getting this to work. For email, I have mail.xxx.xxx DNS'd to 165.165.165.165. I want it to come in to 10.1.0.31. It needs to go out a cluster of 10.1.0.31, 10.1.0.34, or 10.101.201.31 but look like it came from the 165.165.165.165 address. I have set up static NAT for the inbound. I have set up the global PAT with an ACL group of the 10.xxx addresses. I have set this same method up on an ASA with no issues but it doesn't want to work on the PIX 6.3. What am I missing?
no fixup protocol smtp 25
object-group service NewExchange tcp
port-object eq https
port-object eq smtp
[Code] ....
When I start the installation of sonicwall vpn client 2.4 in Windows 7 that sends me the following message "unable to manage networking component. operating system corruption may be preventing installation".I use the version 2.4 Windows 7 32-bit?
View 2 Replies View RelatedI have a Cisco ASA running 8.2 in routed mode.The ASA has three interfaces, inside, outside and DMZ. They connect to the following three networks:
Inside: 10.1.1.0/24
Outside: 10.1.2.0/24
DMZ: 100.1.1.0/24
I have the following dynamic PAT configuration:
nat (inside) 1 10.1.1.0 255.255.255.0
global (outside) 100.1.1.1
nat control is turned off.
By my understanding any traffic from the inside to outside interface will be PATted to 100.1.1.1. However, communications between inside and the DMZ will not be PATted, and should work with no problems.This seems to be corroborated by this document: [URL]Which states:"The adaptive security appliance translates an address when a NAT rule matches the traffic. If no NAT rule matches, processing for the packet continues."EDIT: I may have misunderstood the above statement.I found this guide to configuring NAT/PAT: [URL]It states:"When you specify a group of IP address(es) in a nat command, then you must perform NAT on that group of addresses when they access any lower or same security level interface; you must apply a global command with the same NAT ID on each interface, or use a static command. NAT is not required for that group when it accesses a higher security interface because to perform NAT from outside to inside you must create a separate nat command using the outside keyword. If you do apply outside NAT, then the NAT requirements preceding come into effect for that group of addresses when they access all higher security interfaces. Traffic identified by a static command is not affected."My problem is that packet tracer does not seem to bear me out. It tells me the packet is dropped due to "no matching global" when I source traffic from the inside interface and send it to the DMZ.
I am facing authentication issue with ACS 5.2. Below is AAA flow (EAP-TLS),
- Wireless Users >> Cisco WLC >> ADs <-- everything OK
- Wireless Users >> Cisco WLC >> ACS 5.2 >> ADs <-- problem
Last time I tested with ACS, it worked but didn't do migration as there'll be changes from ADs. Now my customer wants ACS migration by creating new Group in AD, I also update ACS config. For the user from the old group, authentication is ok.For the user from the new group, authentication fails. With subject not found error, showing the user is from the old group.
Seems like ACS is querying from old records (own cache or database). Already restared the ACS but still the same error.
Note: My customer can only access their local ADs (trusted by Global ADs). Local ADs & ACS are in the same network, ACS should go to local AD first.How can we check or make sure it?
Recently we have configured new site where we are unable to ping global DNS from routers and switches.Checked in the firewall ICMP is allowed.The thing we did is we made Native vlan as vlan 10 (Data vlan ) instead of vlan1. Do this is the issue for not pinging.
View 6 Replies View Relatedhow to import route from global VRF to VRF on ASR9001? someone said this feature is coming in the 4.3.1 release, it is ture?
View 1 Replies View RelatedI have an ASA5505 with 8.4 software used on a business DSL account.This means I am running PPPoE session to the provider and am then given an Inside Global subnet /29.I have various servers NATed to specific IP's then have the DHCP users NAT with overload to another of my inside global addresses. When I try to establish an IPSEC tunnel to any of my inside globals and monitor I get an access denied message but there is nothing that is blocking.If I determine my PPPoE IP address I am able to extablish a IPSEC session to that but cannot exchange traffic. Not that I want to use that IP anyway because that PPPoE Session IP changes and only my inside globals are static.I spent several hours on this and cannot put my finger on it. Do I need to allow VPN to the INSIDE interface?
View 2 Replies View RelatedI have been working with the 871 router and configuring it for work at home users. Now we are purchasing and using the 881's instead. I noticed that after write erasing the router, I need to run the command in the global config "license boot module c880-data level advipservices" just have eigrp.However when I type show license, I get the following:
Index 1 Feature: advipservices
Period left: 8 weeks 3 days
Period Used: 2 hours 55 minutes
License Type: EvalRightToUse
[URL]
There is more but I left it out. However it shows that the advipservices license has only 8 weeks and 3 days left.What is this? I thought that when I buy a brand new router, I should get everything, including IOS licenses. So I would like to know is this a new licensing scheme and how does it get register and how do I get it so that the advipservices license is permanent?
I got a Global Implicit Rule problem with my Cisco ASA 5510. Here's my configuration : url...I created a PAT translation so that my web server (group LAN Network) could be accessed from the Internet.Although every rule seems to be ok, i got a "tcp deny access" when i try to telnet my public IP on port 80 (ping is ok).
Why is there only one Global Implicit Rule, and not one for each Interface (like in the older versions of ASA OS) ?
Is it possible to use the ACE as a proxy and send SSL connections to 1 VIP then 2 seperate RSevers based on a URL redirect/rewrite? I need a solution that uses one global IP address and sends the SSL connection to two (and eventually more) seperate virtual machines. I'll try my best to explain it in a below
ACE's currently runn Version A5(2.1)
I have a work computer...Dell Latitude 6400, AT&T Global Network Client (Company VPN service), using Novatel USB551L from Verizon, with their new 4G LTE. First connect to Verizon, then it automatically launchs ATT Global Network Client, once connected, the system automatically maps drives. I stay on for about 15 minutes average to 40 minutes that's when the Verizon drops/disconnects. This consistantly happens throughout the day!
1. If I connect to a "local" wireless signal NO dropping.
2. If I tether my Sprint Android, NO dropping.
Only dropping with the Verizon. I MUST have the Verizon dedicated to this work computer to run the VPN and hopefully (very soon) a mandated VOIP with Avaya!Called Verizon- they sent me a new USB thinking that might fix it. But same thing. They are showing signal strength 4G. Nothing on their side.
I used to have a Thomson st-330 USB modem for my ADSL network. When I wanted to change my IP i just disconnected and reconnected a dial up connection that does the job instantly! (a wan miniport + a batch file to disconnect/recoannect with my password and username)Few days ago i bought a new modem/router (TP-LINK TS-W8951NS)Before that all I knew was that if I wanna change the ip address (if I have a router) was a batch file with commands ipconfig /release/renew.I now know that this changes the ip of my PC not the global IP! So how would I change it without restarting the router? (When i change something in my router interface page (PVC1.2.3....etc) my IP changed instantlybut how do I do this without accessing the router, like commands and a batch file etc? I just found out that my global IP changed on its own after like 30-60 min :S why is that! and to do so manually???
View 2 Replies View RelatedWe're currently PATing everything from a particular subnet to the IP of an outside interface using our ASA5585 (dynamic PAT). We're experiencing pool exhaustion and therefore need to expand the global IP range. Any way of cutting over to the new range without dropping existing connections? For clarity, the current interface address is x.x.x.37/22 and the new PAT pool is x.x.x.114-6/22.
View 6 Replies View RelatedJust loaded the 7.2.103.0 software onto the brand new WiSM2. Going throught the options and have found that under the global parameters for 802.11a/n, 802.11b/g/n radios is now the "Maximum Allowed Clients" option. The allowed setting is from 1 - 200 clients.
Does that mean only 200 clients will be allowed to associate to the WLC on that radio at a maximum?
Doesn't seems to make sense... I have the 500 AP license on this WiSM2... I know this option used to be an optional setting under a WLAN in previous releases.