Establishing A 1.5 Mi Link Between Houses?
Jul 11, 2011
I live in a very rural location with very few high speed Internet options.Unlike a lot of others, i have a relative 1.5 miles away who does have a high speed internet connection and is willing to up their package and split the cost with me. We've each gone up on our roofs with binoculars and confirmed we have a good line of sight, so setting up a long range point-to-point connection is what I am looking to do.
I already have a Tranzeo CPQ (TR6) to place on my roof (destination), so I just need something on my relative's house (source) to connect with.My initial thought was just to pick up another Tranzeo unit like mine from eBay for $100, but after doing some research, it appears the Tranzeo unit I have can only act as a client at the destination, so placing one at the source won't work ... or am I wrong here?
I have used my Tranzeo in the past over a much shorter distance (<800ft) to link up with a consumer Belkin N router, and it worked fine. For this new setup,I'm looking to connect the source's long range unit into my relative's router, then connect the Tranzeo on my roof to my router's WAN port.This way, my router will receive a DHCP address from my relatives router.
View 7 Replies
ADVERTISEMENT
Dec 26, 2011
I need to get the internet from my uncle and aunt's house to my grandma's house next door. I don't know exact feet or anything like that yet but I will get it measured off. My grandma's kids got her a laptop for Christmas but she doesn't have the internet or would be wanting to spend money on it a month since she already says she will not be able to use the computer, but I said we would just somehow get the internet from next door. I don't know off the top of my head but my aunts computer is an older Dell, early P4 computer with xp on it. It's slow but it does work so that is the computer. The router is some sort of D-link with one antenna on it and I'm pretty sure it's probably a G-router(2.4ghz) and not a N-router, but can get that info later too! They currently use Time Warner Cable Roadrunner Turbo for their internet. Both places are well built brick houses and at least 200-300 feet apart. I checked yesterday and the computer was able to pick up the signal in my grandma's house on the end that was closest to my aunts house. It was showing 2 bars but it wasn't extremely fast and that room had a bigger window in it probably allowing some of the signal in? If you moved from that point of the house though and tried to go to the other end, the signal was lost. The router in my aunt's house is one room away from the end of the house that is closest to my grandma's so it could be moved closer but I don't think that will fix the signal enough to do what I need it to do.
View 8 Replies
View Related
Jul 27, 2012
As the title states, I am want to set up a single ADSL connection, using 1 router across 6 apartments. The apartments are 2 floors and from the top they look like this The Router is on Apartment 1. Between apartment 1 and 2, 3 and 4, and 5 and 6 is a normal cement wall. Between 3 and 4 is Cement and stone, so are the outside walls of each house. I was thinking of doing it simple and using 3-4 range extenders such as the Linksys RE1000. From what i searched on the internet, and what the documentation states, the signal will get bottle-necked for the last house due to the RE1000 giving half of the bandwidth. Quote from Linksys FAQ: Quote: 7. Can I add more than one RE1000 to my existing wireless network? Yes. But since the RE1000 only gets half of the wireless signal from your main router or access point, adding multiple range extenders can provide you with even lower signal, thus, giving lesser bandwidth to your wireless computers or devices that you are going to connect to these additional extenders.So, what would be an optimal solution to this? Should I go ahead and install the RE1000's? Is there something better that i can do?
View 5 Replies
View Related
Oct 17, 2012
My company bought another company and moved them into our building. the company moved in but are on an entirely different network all together. wired separately, different domains.what i would like to do is be able to have them communicate with each other. have users on company A be able to use printers on company B's side of the network.
View 15 Replies
View Related
Oct 1, 2012
We have a fixed IP address 3G data SIM which we intend to use as backup for our ADSL connectivity using a CISCO887VAG+7-K9 router. (We have previously implemented similar using the older CISCO887G-K9 router without any issues)
The problem is, we don't seem to be able to establish 3G connectivity with this new router. Our service provider assures us that the SIM card is active (although they have seen no connection attempts from us on their RADIUS server)
The router is running IOS version 15.1(4)M4 and the following is the relevant config we have used:
!
cellular 0 gsm profile create 1 $apn chap $user $pass ipv4
!
chat-script INTERNET "" "AT!SCACT=1,1" TIMEOUT 60 "OK"
!
[Code].....
View 18 Replies
View Related
May 7, 2012
I have a site to site IPSec tunnel setup and operational but periodically the remote site goes down, because of a somewhat reliable internet connection. The only way to get the tunnel to re-establish is to go to the remote site and simply issue a ping from a workstation on the remote network. We were having this same issue with a Cisco PIX 506E but decided to upgrade the hardware and see if that resolve the issue. It ran for well over a year and our assumtions was that the issue was resolved. I was looking in the direction of the security-association lifetime but if we power cycle the unit, I would expect that it would kill the SA but even after power cycling, the VPN does not come up automatically.
View 1 Replies
View Related
Jul 20, 2011
when entering Remote group 0.0.0.0/0.0.0.0 to establish a VPN, and all communication is not working.You do not know how to set up-work?
View 1 Replies
View Related
Aug 17, 2011
Attached are the configuration files for the devices in question. I have a 5510 that belongs to my company and a 5505 that belongs to another company. The 5505 sits behind the 5510 and is able to connect to the Internet. My thought was that VPN access should be a trivial pursuit. I was planning on just giving the admin at the remote office the public IP address that's natted to the 5505 and all would be good.
View 7 Replies
View Related
Aug 5, 2012
A multipoint GRE (mGRE) and IPSec tunnel is built between two routers. The topology of the device is briefied below:Configuration in End Router: This is a cisco 2811 router. Amoung 2 ethernet interface ,one is using for LAN and one is for WAN. In WAN part , we have configured mGRE (Tunnel1 and Tunnel 2)by creating sub-interface of the router. From the interface ,we terminating the link to MPLS cloud from there its pointing towards our core router.From End router we are advertising the path through EIGRP and from the cloud BGP advertisied to the core router.[code]
View 1 Replies
View Related
Jan 9, 2012
I am having an issue with establishing L2L VPN with remote site. My side is cisco asa 5520 and other side is check point UTM-- tunnel is not up.just wnated to confirm on my sidde if the configuration is OK.al the parameters using are correct for both side. any issue with below conf ? default route is pointing to my next GW address is there additiona default is required for VPN ? to reach the remote LAN somthing like pointing to remote peer address.to give a brief idea front end device is router as GW wher in internet is terminated and other wan connections ASA is behind ther GW rtr and outside int of asa and lan interface of GW rtr is having public ip. LAN switch is connected to ASA
access-list insideinterface_nat0_outbound extended permit ip 192.168.36.0 255.255.255.0 10.34.12.0 255.255.254.0
access-list outsideinterface_cryptomap_40 extended permit ip 192.168.36.0 255.255.255.0 10.34.12.0 255.255.254.0
nat (insideinterface) 0 access-list insideinterface_nat0_outbound
crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac
crypto ipsec transform-set ESP-3DES-MD5 esp-3des esp-md5-hmac
[code]....
View 9 Replies
View Related
Mar 16, 2013
establishing a Static NAT on an 1841 router.
I'm at a FOX affiliate TV station, and in order to connect our EAS Device to the internet & Fox Splicer, I need to setup a Statio NAT, so we picked up an 1841 on eBay.
I've done a little configuration in HyperTerminal.
I've done these ip addresses:
FE0/0 10.1.10.13 this is the subnet our EAS device is on
FE0/1 10.110.81.174 this is the subnet of the Fox Splicer.
I need to have NAT translate 10.1.10.11 to 10.110.81.170 and I also need to set a route for 10.110.81.0/24 pointing to 10.110.81.161
View 12 Replies
View Related
Oct 16, 2012
I'm trying to dial a Cisco 1841 BRI from my Cisco 2811 PRI. I'm getting a few errors but not sure what else to do to correct the issue. Config & Logs below from 1841:
interface BRI0/0/0no ip addressencapsulation pppdialer pool-member 2isdn switch-type basic-niisdn point-to-point-setupno cdp enableppp authentication chap callin
00:26:44: ISDN BR0/0/0 Q931: RX <- SETUP pd = 8 callref = 0x46 Bearer Capability i = 0x8890 Standard = CCITT Transfer Capability = Unrestricted Digital Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0x89 Signal i = 0x40 - Alerting on - pattern 0 Called Party Number i = 0xC1, '452####' Plan:ISDN, Type:Subscriber(local) Locking Shift to Codeset 5 Codeset 5 IE 0x2A i = 0x808001039E05, 'From ', 0x8B0C, '214 ###-####', 0x8001, '<'00:26:44:
[Code]....
View 2 Replies
View Related
Feb 26, 2011
I have 100 mbps fiber connection. I bought 320N today I bought 320N and here is the problem:
We have a switch in the building. I am getting connection via CAT5. So I choosed "Use as WAN Port" from Ethernet settings. There is not much you can do here. I just used PPPoE and connected internet without any problem. The problem is I am only getting 32mbps. When I connect CAT5 cable directly to my computer I am getting 92mbps.
Maybe WAG320N is not establishing a full duplex connection.
View 3 Replies
View Related
Aug 30, 2012
My ISP (OTEnet, Greece) offers IPv6 connectivity in the form of dual-stack IPv4/IPv6 with the requirement that the router supports DHCPv6 Prefix Delegation for establishing an IPv6 connection.Using other routers (Cisco 887W, DrayTek Vigor2130n), I have established an IPv4/IPv6 connection but I am unable to do so with the EA4500. As a matter of fact, when I have the "IPv6 - Automatic" option enabled the router not only cannot obtain an IPv6 prefix from the ISP but it gets stuck in the connection attempt and never obtains an IPv4 or an IPv6 address. I have to disable the IPv6 option in order to simply establish an IPv4-only connection without problems.So, my questions are:
1. Does the latest (2.1.38.38880) firmware support dual-stack IPv6 and DHCPv6 Prefix Delegation?
2. If the router cannot negotiate an IPv6 connection why is it not establishing an IPv4 connection only but gets stuck in the process?
View 9 Replies
View Related
Jul 11, 2012
I reset the wap610N,after establishing connection, my iphone see my network domain but does not connect. I heard of dual band setting,how do i go about that. What must i do to establish connection with the iphone.
View 4 Replies
View Related
Jan 13, 2012
I have recently bought two CISCO routers RV220W for our main and brach office mainly for VPN tunneling. I didnt know they are routers only not modems. so I have set it up using BT 2wire Router as modem only.
I have successfuly setup the routers and manage to establish the VPN tunneling between two routers. AS bt doesnt give static WAN IP address so I have used Dyndns which works fine. although I have 5 static ip address which cannot be used for WAN unless i cahnge to one IP address even then BT tech said it will not work.
when I created the tunnel i could ping both servers with their IP only not with the names. I can ping them fine locally. I could also see the network from branch office to main office but not from main office to branch office. today when I restarted the server I cannot ping both server i mean vice versa but VPN tunnel is established. now I cannot see the network from branch office to main office as well.
Both sites running windows server 2008 standard. main office server has 6 NIC cards two wwith public and three with private ip addresses, its also runing Terminal server, exchange, file etc. the branch office has two NIC card one with private and one with public ip. Intially I could establish the VPN tunnel as the network range was same on both sites so I changed one in th e10.0.0.0 range other in 192.168.1.0 range and VPN tunnel was established straightaway.
As soon as the VPN tunnel was created I manage to creat an external trust without any problems and both servers are added in each other forward zones as name servers.
in the main office the fues went off and I had to re-start the router and now the VPN tunnel is not establishing, mainly the error is ISAKMP-SA Expired I will paste the log of both routers below
1. How to Clear Old or Existing Security Associations (Tunnels) on RV220W
2. how to fix the problem where I can ping the server with their IP as well as domain names ?
3. how to set it up so that both sides can see the network resources as well as access it ?
4. how to set it up so if the staff in branch office wants to log on the domain in main office he can simply do it as he does it in his office.
View 7 Replies
View Related
Feb 8, 2012
I am trying to establish a Site-to-Site VPN to our customer. I am using ASA5510 and the customer was using Fortigate 1000A. The problem that we're having was regarding the IKE Phase 2, I think!. Cisco debug information indicates "All IPSec SA proposals found unacceptable!"
View 11 Replies
View Related
Apr 14, 2013
I have a problem configuring a site to site VPN between two sites, one is an ASA5540 with version 8.2, the other is an ASA5545X with version 9.0 I'll try to include the relevant portions of the configs here... the tunnel will not establish and nothing shows on debug logs that I can find. I know the outside addresses for both work, as clients can connect into both.
ASA5540:
: Saved
:
ASA Version 8.2(5)
object-group network VEYANCE_NET
network-object <ASA5540NetworkObject>
[code].....
View 7 Replies
View Related
Apr 12, 2013
Region : Portugal
Model : TD-W8970
Hardware Version : V1
Firmware Version :
ISP :
Two week ago I bought the TD-W8970 ADSL router model. Im using a canon pixma IP4700 printer connected to the router USB print server port and everything is working without any issues if I just look to the router functionalities.
However since that Ive installed TP-LINK USB Printer Controller, my both computers (desktop with windows 7 and laptop with windows 8) are getting very often some BSOD.
I was editing all files automatically generated by windows on this cases and if seems that the cause of this issue is the file TplinkUDSMBus.sys (installed by USB Printer Controller).
To check the impact of this, Ive uninstalled the TP-LINK USB Printer Controller software from my laptop and I dont have any BSOD since 5 days ago. In the desktop Im still have the same issue.
The router print server is a nice functionality and I really want to use it.
View 1 Replies
View Related
Feb 14, 2013
Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version :
ISP :
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : Comcast
I just upgraded my DLink DIR655 to WDR4300. My VOIP service has worked for the last 5 years. But with WDR4300, I'm frequently experiencing dropped calls. The call will be cut off every 20 seconds or so. This is really a deal-killer.
View 7 Replies
View Related
Mar 3, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : latest
ISP : french orange
I am trying to set up port forwarding on this router but it seems I need to use virtual servers but in all the guides there is a menu for this under the advance settings nat menu.I do not have that option, I have downloaded the latest firmware but still nothing.
View 1 Replies
View Related
Feb 26, 2013
when I connect my DIR-655 to the Motorola SB6141 cable modem I notice that the link speed LED on the cable modem never glows blue indicating a gigabit connection, it only glows amber indicating a lower negotiated speed. I am using a Cat6 cable between the two devices and have also tried a Cat5e cable.
When I try and force the WAN port speed to 1000Mpbs in the router interface the cable modem link speed will not light at all with no connectivity. Only resetting to Auto WAN port speed restores functionality albeit at the lower negotiated speed setting.
I'm running the DIR-655 rev B1 at 2.03NA firmware level.
I did connect the modem directly to my PC that uses an Intel Gigabit ethernet card and still had the lower connection indication (Amber) so it seems that the modem might be faulty.
View 4 Replies
View Related
Jan 30, 2013
Region : Others
Model : TL-MR3020
Hardware Version : V1
Firmware Version :
ISP :
After I configure the WAN setting on TL-MR3020, my laptop unable to connect to my TL-MR3020 anymore, the message says "windows was unable to connect to TP-LINK_POCKET_3020_B5F9AD".
View 2 Replies
View Related
May 13, 2013
Region : UnitedStates
Model : TL-WR740N
Hardware Version : V4
Firmware Version : 3.1
ISP : T2
I have a problem with my tp-link router. I dont have an internet access of the router, updated firmware... When i connect to router by laptop the internet works fine, but when i connect to router by phone i have an internet access only 5 second and than i lost it, but still connected. I don't know what is the problem here, maybe phone?
View 3 Replies
View Related
Feb 16, 2013
Region : India
Model : TL-WR740N
Hardware Version : Not Clear
ISP : BSNL BB
I have a BSNL BB connection. When I use the connection directly, without adding TP Link router, all the websites open flawlessly. Once when I connect the wireless router, certain websites for example Yahoomail, pepperfry.com, yepme.com don't open at all. These are just examples, but I'm unable to access many sites which is a bit annoying. But sites such as gmail, youtube, facebook open clean, there are no issues. I didn't make any configuration changes too. I tried it more than three or four times, but there is a restricted access only.
View 4 Replies
View Related
Dec 27, 2012
We have a customer who has a network consisting of two ISPs, one as a primary and the other as a backup. We are trying to create a configuration that would allow the primary link to fail and the secondary link to automatically pick up traffic and begin routing .how to set something like this up. Both routers are non Cisco routers and there for HSRP is out.
View 14 Replies
View Related
Nov 20, 2011
I have a DIR-655 Rev B, in a typical cascaded config: modem > dir-555 > switches & devices, etc.One of the four dir-655 ports is connected to a cheap-o Belink Wifi router which I use as an access point (I only use this because there's one device that only supports WEP). I was debugging a WiFi issue and I pulled the plug on this Belkin just to get it out of the picture. Well, when I did that, EVERYTHING that was connected through the DIR-655 lost connection. (Well, all the wired stuff anyway- not sure about WiFi devices through the DIR-655). I noticed that the port link light for the powered-off device stayed on on the DIR-655. When I unplugged the cable from the DIR-655, everything went back to normal.
So what I'm trying to figure out now is, is this a DIR-655 issue, or is it something screwy with the Belkin? Or Both? I've got to assume that there's some inherent flaw in the DIR-655 that allows something connected to a port to screw up everything that it's hosting.
View 7 Replies
View Related
Mar 6, 2012
I'm in an issue w/ on of our ISPs. We're using an ADSL line as a secondary light load line ( 16 MBit, /w PBR in place to separate the 80 and 443 from the business-critical applications running via a SDSL link. ).
I am on a 2611 XM with IOS 12.2, mated to a D-Link 321B modem running in transparent mode. After running smoothly for weeks, for a few days now, every night some time between 2 AM and 4 AM the link would die with the dialer showing:
Virtual-Access1 is up, line protocol is down Hardware is Virtual Access interface [code]....
To my knowledge, the only option to bring it up again is to reload the box . Taking into account that the router is our DHCP server and the date gets reset to 1994, interesting effects are the outcome of resetting the box.
Well, the ISP have checked their gear and keep saying that these report a "port error" ( quite unspecific ) and blame me that I have a wrong. config in place - which is here:
interface Dialer2
description ecotel Bridge
ip address negotiated
no ip proxy-arp
[code]...
View 10 Replies
View Related
Jan 30, 2012
I have 1.00 build 0522 and searching the support website I see no link. But reading here I see there is a later version.
View 1 Replies
View Related
Jan 9, 2013
I have a DIR-655 that I have been using for a while (b1 revision). and suddenly I noticed my wifi speed fluctuates constantly. My lenovo Y580 sees speed drop to 130 immediately and then it can slowly progress to 1 Mbps until the hardware is all rebooted. Same happens to my Nexus 7, Dell XPS M1530 and to my roku. I have updated to 2.07 (since 2.10 is advised to avoid). And I have attempted changing channels or factory refresh.What Firmware version is currently loaded? 2.07What region are you located?
What ISP Service do you have? Cable or DSL? Cable (link speed independent of internet speed)What ISP Modem do you have? Stand Alone or built in router? Separate Motorola ((link speed independent of modem)What ISP Modem make and model do you have? Does not matter, router issue.If this modem has a built in router, it's best to bridge the modem. Having 2 routers on the same line can cause connection problems.To tell if the modem is bridged or not, look at the routers web page, Status/Device Info/Wan Section, if there is a 192.168.0.# address in the WAN IP address field, then the modem is not bridged. Not bridged
Turn off all anti virus and firewall programs on PC while testing. 3rd party firewalls are not generally needed when using routers as they are effective on blocking malicious inbound traffic. Independent of issue, not a factor
Turn off all devices accept for one wired PC while testing. Wired works perfect.Check cable between Modem and Router, swap out to be sure. Cat6 is recommended. Wireless issue.
View 6 Replies
View Related
Dec 27, 2011
I can't log in to my router settings because my CAPTCHA just displays a red x.to sign up for this forum the CAPTCHA worked....
View 4 Replies
View Related
Dec 26, 2011
The 2 routers are Di-524UP and Dir-655.I have 2 routers and 2 modems,Computer 1 and and 2 are running on the same router as they have low internet usage.Computer usually does large amount of downloading and streaming and requires a separate connection as not to lag the browsing for computer 1 and 2.How could I link router 1 and 2 together so that my computer 3 could deposit files that are downloaded over the internet through wireless lan into my NAS.Or are there any devices that can bridge 2 routers with 2 different network connections over the same lan network.
View 3 Replies
View Related
Mar 20, 2012
I have a dir-825 and wireless clients connected on the 5ghz ssid can see clients on 2.4 ssid and also out to the WAN (internet) but can't see any clients (my NAS ) connected to the dir-825 wired lan.2.4 ghz clients see everything fine. same with clients connected through the wired lan. I've tried DHCP and static ips. no idea what to do next.I was originally on 2.02 fw and have tried 2.03, 2.05 and now 2.06I'd really like to keep the 5ghz on because I have an AP by my tv and several devices connect from there to stream from the NAS.
View 2 Replies
View Related