Find Active Sync Usb FV Setup File For Connectivity Between PC To Airflair Tablet
Jul 27, 2011Where can I fint the flair activesync usb FVsetup file for connectivity between PC to Airflair tablet
View 2 Replies
ADVERTISEMENT
Change Router Setup So Tablet Can Find IP Address?
Apr 27, 2012Le Pan 2 tablet keeps trying to "obtain IP address." I have a dlink 655 router. I've removed the password from the router. Rarely will the tablet connect.
View 1 Replies View RelatedBackup / Sync Between File Server?
Mar 21, 2013I have a Nas4Free (FreeBSD) server on location A and another Nas4Free server on location B.
I need to regulary access to location B's some folder from Windows machine at location A. What is the best scenario for this?
I think to rsync those folders/files every night to location A, but then I think what if in the future there are many other locations (C, D, E, F) that need to be rsynced to location A, that will make location A need a very large harddisk space that maybe not available in the market or limit
by the hardware/BIOS support.
Cisco Firewall :: 5510 Exchange Active Sync Stops Working
May 8, 2012I know that I've run into this before but I can't remember the fix. I have a 5510. The 3 interfaces involved are INSIDE, OUTSIDE, and GUEST. Corporate users are allowed to put their iPhones on the Guest network, but the problem is that their Exchange ActiveSync stops working. It is tied to the external DNS name of the OWA server (we'll say webmail.abc.com). So the users are funneled out one public IP on the OUTSIDE interface and are trying to communicate with the outside of the OWA server, which is NATed to another public IP on the same outside interface. What do I need to do on the ASA to allow users on the guest network (behind the GUEST interface) to access the mail server using its public IP (behind the INSIDE interface)
View 1 Replies View RelatedWindows Server 2008 - Online / Offline File Sync
Jan 24, 2012Domain support with these operating systems seems to be hit and miss.I have 11 computers connected to a domain and I was wondering what the best way to back up the files on the workstations to the server would be. The server has a mirrored raid array and online backup as well. Just checking to see what the best way to do this would be. I am having trouble with the offline files sync / online files sync with these operating systems.
View 1 Replies View RelatedRouters / Switches :: Find Wifi Number To Add Tablet?
Feb 9, 2012How can I find my WiFi # to add tablet? I have it on my laptop, Ipod Touch, and don't want to reset # to add the tablet
View 1 Replies View RelatedCisco AAA/Identity/Nac :: How To Setup Sync Between Two New ACS Server V5.3
Dec 4, 2011I setup one acs v5.3 in one server in NYC and another acs v5.3 in SJC.I want to make the acs.nyc as primary and acs.sjc as the secondary, how do i setup it up?
View 1 Replies View RelatedWireless Network Setup With Only A Tablet?
Jan 27, 2012My son is trying to set up his (just received) ATT U-verse network but has only a Acer Android Tablet to connect to it. The instructions say to plug it (the modem) in to the computer but of course there isn't one on the tablet.
View 2 Replies View RelatedTablet Setup - Incoming Server Settings?
Feb 27, 2013I am trying to set up my new tablet and I'm filling out user name, password, POP3 server, port - what is port?
View 2 Replies View RelatedCisco Wireless :: WAP4400N / How To Setup Access Point To Sync With New Router
Feb 16, 2012I had been using a Linksys Wireless-N Router WRT350N with a Linksys Wireless-N Access Point WAP4400N. The router quit working so I upgraded to a Linksys Wireless-N Router E1550. The problem is, the new router doesn't sync with the old access point. how to setup the Access Point to sync with the new router?
View 1 Replies View RelatedCisco Routers :: SRP527W - Setup - Cannot Find Web Console To Setup
Jan 1, 2012I've just purchased a couple of SRP527W routers. I've been unable to even browse to the default 192.168.15.1 to start my configuration. My local network is 192.168.1.x. At risk of showing my stupidity, what am I doing wrong.
View 5 Replies View RelatedCisco Firewall :: ASA 5520s From Active / Standby To Active / Active
Jul 17, 2012I have a pair of ASA 5520s operating in failover pair as active/standby, having two contexts on them. I am planning to share the load and make it active/active making first context active on the primary unit and second context active on the secondary unit. My question is if this will disrupt any connectivity thru these firewalls when I do "no failover" on the active/standby and assign the contexts to different failover groups and enable the failover back.
View 6 Replies View RelatedCisco :: Find GSD File For IE3000?
Dec 11, 2011Where can I find the GSD file for IE3000?
View 2 Replies View RelatedCisco AAA/Identity/Nac :: ACS 5.2 - Cannot Find Backup File
Jan 20, 2013I had ACS 5.2 ( Evalution License ) setup installed on VMware with patch 11 when I try to restore earlier backup of ACS gives me error "Cannot find acsbackup_instance.log in the backup file"
I am using Filezilla FTP sever for backup transfer.
LAN Limited Connectivity Can't Find IP Address Nvidia
Jun 12, 2011I have reinstalled XP on an older PC and have run Driver Reboot to check all the drivers are ok. So far so good, except - I cannot get onto the internet.... router etc is working... have reinstalled the nvidia nforce networking controller (as this kept coming up with errors). When trying to connect, error message is: limited or no connectivity.
View 5 Replies View RelatedCisco Firewall :: Two 5505 Redundant With Active Standby Setup?
Oct 21, 2012I have two 5505 ASA. I would like to know can I make two 5505 failover redundant with active standby setup?
View 11 Replies View RelatedCisco Firewall :: 5510 / Setup Snmpv3 With Active Failover?
Apr 1, 2012What I am attempting to do is setup snmpv3 on two failover 5510's .The problem I am running into, the snmp management software rejects one of the devices as it sees it as having a duplicate engine ID since the two devices share the same config. Would like to know how this would work in an active/active setup being able to poll both devices.
View 2 Replies View RelatedCisco :: LMS 4.0.1 - Duplicate IP Address Caused By ACE Active / Standby Setup?
Dec 17, 2011I am using LMS 4.0.1 to monitor the data center network devices. I have two core switches, each core switch has an ACE module installed on it. I have configured many virtual context on each ACE module, and these ACE contexts are acting as primary and standby roles. The problem i faced with is LMS reports the virtual ip address configured on each ace context as duplicate ip address, and i didn't know how to deal with it. As to my understanding, this should be the normal behavior due to my setup, but how can i remove this alarm on LMS 4.0.1?
View 1 Replies View RelatedCisco AAA/Identity/Nac :: Setup AAA For Anyconnect With Active Directory On Asdm 6.4
Aug 20, 2012Im sure this has been asked before but a quick search has not yielded any exact results so here goes
I have anyconnect up and working great on for vpn users using local authentication. Im going over the white papers and seeing a lot of options for NT domain, LDAP, tacacs+ etc
we would like remote vpn users to autherticate using their windows domain password, but Im not sure which would be the easiest and quickest option to configure, and I cant find a guide for asdm setup for this topic that doesnt cause more questions than answers . The white papers Im finding are confusing since I am a rookie at this topic.
what is the easiest/quickest way to setup windows domain authentication via asdm?
How To Setup 2 PC To Write To The Same File
May 23, 2012How to setup 2 PC to write to the same file simultaneous without loosingdata or messing up the data from any two pc in a peer to peer network?Let say a file reside on PC1, both user open a file and edit the same timeand save the data and the file contain both data from both computerwithout messing up the content from either user
View 2 Replies View RelatedCisco Firewall :: To Setup ASA 5525 In Active Standby Failover Mode
Feb 12, 2013I need to setup an ASA 5525 in Active/Standby failover mode. I am setting up the ASA for a company that purchased only one public IP address. The public IP address is assigned to the outside interface. My question is will failover work correctly if I don't use a secondary IP address on the failover configuration on the outside interface?
View 4 Replies View RelatedCisco Firewall :: 6500 Setup In Active / Standby Fail Over Configuration
Feb 29, 2012I have been having an annoying issue for the past few weeks with my ASA setup. We are using the ASA as our Remote Access Gateway and originally had it setup in a Active/Standby failover configuration using 2 x 5520 ASA's.The original setup of the devices was that the 2 x ASA were setup in a failover configuration, with both of them connecting back to the internal network via a 6500 device. Because of using failover I created a VLAN on the 6500 and put the two ports that connect the ASA's into that VLAN. I then configured the VLAN interface to be the EIGRP interface for the neighbour relationship to the ASA's.
The problem I am seeing is that the EIGRP neighbour relationship between the Active ASA and the 6500 keeps flapping. It occurs abour 4-5 times every day at randmon intervals. Sometimes the neighbour relationship will stay up for 6-7 hours, other times it flaps every 1-2 hours. I initially thought it was due to the failover configuration so I removed one of the ASA's and removed all of the failover configuration, but the EIGRP neighbour flapping problem still exisits. [code] Since removing the failvoer configuration I am thinking it could be a physical cable problem?
Cisco Firewall :: 5520 Running 8.4(2) - Setup Active / Standby Failover
Jan 30, 2012I am trying to setup an active/standby failover with 5520's running 8.4(2) and am having problems with it not dropping connections during the failover. I am using a portchannel from the switch to each ASA and using sub-interfaces off that. I'm using the command Failover mac address Port-Channel1 “mac-address on primary Port-Channel1” “mac-address on standby Port-Channel1”.The command goes through but doing a show interface port-channel1 doesn't show a change in the mac address on the secondary unit after a failover when it becomes active.
View 3 Replies View RelatedCisco Firewall :: 5510 Setup In Active / Standby Failover Configuration
May 8, 2012We have 2 ASA 5510's setup in an active, standby failover configuration. When the primary fails over to standby, the 3rd party cert does not failover to the standby ASA. The users then receive the CERT missing, invalid message and have to select yes, no to move on. This does not occur when the primary is not in failover mode. It is my understanding that failover fails over certs but in our case it does not apper to be working correctly.
View 1 Replies View RelatedCisco Switching/Routing :: 4500 Can't Find A Boot File
Jan 6, 2013I have a 4503-E on my work bench. It's been out of production for a year or so. I started working on it last week. I think I may have cause a boot up problem. It comes up to ROMMON, but then I need to type "boot" to get it to come up all the way.
config-register = 0x2102Autobooting using BOOT variable specified file.....
Could not find a valid file in BOOT environment variable.BOOT variable can be set from IOS. To find currently setRom Monitor variables, please type 'set' command.
For choosing a boot method, type 'confreg' command. rommon 1 >
For choosing a boot method, type 'confreg' command.rommon 1 >
At this point I type "boot" and it proceeds to the normal bootup. (Below are a couple more print outs)
RG-4503#RG-4503#dir /allDirectory of bootflash:/
1 -rwx 12185732 Feb 21 2008 08:23:59 -06:00 [cat4500-ipbase-mz.122-31.SGA3.bin] 2 -rwx 14787732 May 21 2008 01:00:30 -06:00 cat4500-ipbasek9-mz.122-44.SG.bin 3 -rw- 7315 Dec 31 2012 07:13:15 -06:00 ***
61341696 bytes total (34360532 bytes free)RG-4503#RG-4503#RG-4503#show run | include bootboot-start-markerboot-end-markerRG-4503#
It looks like there is nothing between boot-start and boot-end.
Acer LAN Driver No Setup File
Aug 10, 2011I did a clean install on acer extensa e261 with xp pro. i had to download the audi, vga and lan drivers from acer website. audi and vga is good but the lan driver has no setup or .exe file.
View 1 Replies View RelatedCisco :: 1242 How To Setup Wireless Clients MAC+Active Directory Based Access
Oct 30, 2012I want to setup Wireless Clients MAC+Active Directory based acess on AP 1242 standalone Wireless series.Steps i have configured :
1) SSID manger under Open authentication : Selected with EAP.
2) under advacned Radius.MAC Address AuthenticationMAC Addresses Authenticated by: Authentication Server Only
3) Server Manger : Current server list added the radius ip address 10.1.200.x
Setup Is Also Showing Limited Connectivity?
Aug 21, 2011My setup is also showing limited connectivity. I made sure the key was correct. I am able to connect via wire. I am pasting my ipconfig /all to this post. The tunnel adapter is disconnected and I have had this problem before. i unistalled the adapter and re-installed it also checked the iphelper in services was started.
Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Usersrian>ipconfig /all
[Code].....
Two Networks 1 Database File / How To Setup A Network
Feb 17, 2013I was curious what is the best way and how to setup a network that can do the following:I have two offices in different cities but I need them to be able to access the same database file.I can easily share a folder in 1 city and have all those computers access it but how can I share the file with the computers at the other city?
View 3 Replies View RelatedHow To Setup A Windows XP File / Printer Home Server
Jan 21, 2013I would like to set up a home server, that will sit under the stairs so that it can link to out BT home hub (v3). The idea is then to connect the printer to it, so that we can have both a wireless printer and a central file store for pictures/vids etc.Is XP ok for this? if so, what settings do I need to change/add?Is there any software that I need to make it work?How do I make sure that it is secure for external hacking? As it will contain our personal docs/photos etc and I would hate to use them.
View 1 Replies View RelatedCisco Switching/Routing :: 3560 - HSRP Setup / S2 Active And Route Traffic From Internet To Client?
Jan 14, 2012i have a strange issue with an HSRP Setup. I have two (S1+S2) 3560 as Core/Distribution Layer. Inter-vlan routing are enabled on both Switches. S1 and S2 are connected with an ether channel over four fibre ports. S3 -S5 are the (L2) access layer.
Gi0/1 on S1 and S2 are L3 ports, connect to a Linux Firewall.
HSRP is enabled, S1 is the active router and the STP root bridge.
But, my monitoring via cacti show me, that the Gi0/1 on S2 is active, too! But it should not be active? Only if S1 fails, should S2 the active switch.A client from the access ports on S3 - 5 gets traffic from the Internet via Gi0/1 from S2. Gi0/1 on S1 is active too, but will send mostly traffic to the Internet. Why is S2 active and why route it traffic from the Internet to the client?
Cisco WAN :: 1X10GE V2EP To Setup Asr With 10Gb Connectivity
Jan 19, 2012I am trying to set up an ASR with 10Gb connectivity. I noticed a new card that does not appear to show up in any data sheets. This card is considerably less expensive than the other SPAs and I am wondedring what the differentiators are for this card. I would also be interested in what tranceiver type this card supported.
View 4 Replies View RelatedLinksys WAG54GS No Wireless Connectivity After Secure Easy Setup
Apr 24, 2012We have a linksys WAG54GS router the secure easy setup button of which was pressed instead of the on off switch when a reset was required. Now we can only browse the internet via a cable from the pc lan port to the router ethernet port. Things done :- Secure easy setup button held down for 10 seconds. Router went to an unsecured one now back to secure.
View 3 Replies View Related