I was curious what is the best way and how to setup a network that can do the following:I have two offices in different cities but I need them to be able to access the same database file.I can easily share a folder in 1 city and have all those computers access it but how can I share the file with the computers at the other city?
View 3 Replies
I need to run a datebase for training, but the room i use dose not have network access so therefore thought i could use vmware.
View 2 Replies View RelatedI m connected to a LAN With about 1500-2000 other clients. My network has been subnetted into several small networks according to the hostels (i study in a university). Most effective way to implement INTER-hostel file sharing.Each hostel has typically about 200 clients.
View 2 Replies View RelatedOur company has a Server in the office to which we all map network drives.This server is backed up to a Cloud Server (egnyte.com). Whenever I am working on a database on the mapped network drive, it freezes up after 5-10 minutes with the alert "Your network access was interrupted.To continue, close the database,and then open it again."
This problem does not occur with any other Office Products,only Access.It happens to all databases on the server and to all users.
It does not do this when the file is saved on my desktop or when I am working on it directly through the cloud server. When working on the cloud server, however, I went to Compact and Repair my database and a window came up saying the file location did not exist and my whole database disappeared. It was already saved in the file location, I was just compacting and repairing.
Is there some problem with using a local server that backs up to a cloud that makes it lose connectivity every few minutes? Why is this only happening with Access?
How to share a file on different networks
View 1 Replies View RelatedMy home network starts from the ISP/Cable modem to a Belkin wireless router.
A WIN XP box connects via ethernet cable in that room. A second WIN XP box connects via wireless in the next room. A Third box Win7 laptop connects via wireless in another room.
All machines have Internet Web browsing working fine, all machines can see each others shared files and printers across the home network.
Here's where I get creative... I added a fourth box WIN XP via ethernet (LAN to LAN) to the Win7 Laptop. It shows as an �unidentified network� of type Public in Network and Sharing.
Using Shared Internet Connections on the Win7 laptop, the fourth WIN XP now also has Web browsing working just fine across the LAN to the laptop over the wireless and out to the world.
The Win7 Laptop can see shared files and printers on either side of its networks (fourth WIN XP on the LAN side, and first and second WIN XP on the wireless side), and they can see its shared files and printers.
However, the fourth WIN XP on the LAN network won't see the first and second WIN XP on the wireless side. File and printer sharing doesn't see to make the jump across the Laptop Win7 in the middle.
How do I bridge the two networks for file and printer sharing ??
How to setup 2 PC to write to the same file simultaneous without loosingdata or messing up the data from any two pc in a peer to peer network?Let say a file reside on PC1, both user open a file and edit the same timeand save the data and the file contain both data from both computerwithout messing up the content from either user
View 2 Replies View RelatedI want to set up 2 separate network with one cable modem for my restaurant. we wants to provide WIFI access to its customers, but wants to keep their internal network separated.
View 2 Replies View RelatedI am tryign to setup 2 networks for my company. I need 1 network for the first room and another network on the second room. Each room can't access another room's computer. I have setup 2 workgroups for each room but it seems that the workgroup can't setup passwords. Every computer is in the same subnet with static ip. They all connect to a switch -> router -> modem.
View 3 Replies View RelatedI did a clean install on acer extensa e261 with xp pro. i had to download the audi, vga and lan drivers from acer website. audi and vga is good but the lan driver has no setup or .exe file.
View 1 Replies View RelatedWe have 36 cctv cameras slowing down our oracle network pc's all in same subnet. I want to remove the dvr's of cctv to a separate network to improve performance. How to accomplish that with a Rv042 linksys router? Or is there any other better way around. 5 Users access the cctv cameras all the time.
View 2 Replies View RelatedHow do you setup multiple networks on one router? Is it as easy as changing subnets?
View 8 Replies View RelatedWhen i tried to play back my video this error message appear:
Get data from database failed.i have a few date in my database. I can only playback the video for half of them which is the older one.How to repair them?
How to establish two different routers with seperate networks to a single cable modem?
View 3 Replies View RelatedI would like to set up a home server, that will sit under the stairs so that it can link to out BT home hub (v3). The idea is then to connect the printer to it, so that we can have both a wireless printer and a central file store for pictures/vids etc.Is XP ok for this? if so, what settings do I need to change/add?Is there any software that I need to make it work?How do I make sure that it is secure for external hacking? As it will contain our personal docs/photos etc and I would hate to use them.
View 1 Replies View RelatedWe have kids in the house and I'd like to limit their internet access to certain times of the day but because of the great amount of devices they use (phones, tablets, laptops, etc.) the only way I could think of doing that easily was to set up two wireless networks: one that the adults could use 24/7 and the other that the kids could access during certain set hours.
Here's the equipment I'm working with:
DLink DIR 615 wireless router
DLink DIR 515 wireless router
Motorola Surfboard cable modem S85101U
I plugged the DLink 615 in, set it up for DHCP client and plugged it into the cable modem. I lef the default 192.168.0.1 IP address for the device. On that router, I also reserved the 192.168.0.199 IP address and assigned it to the DLink 515.I also gave the DLink 515 device the IP 192.168.1.1 so I could administer it.I set the DLink 515 to static IP and made the IP 192.168.0.199 and the default gateway 192.168.0.1.I plugged the DLink 515 into one of the LAN ports in the DLink 615.I set a schedule on the DLink 615 to shut down internet access to the DLink 515 at a certain hour and turn it back on at another time.Everything seems to work ok, but at least once a day we have to unplug and plug the routers to reset them.
I am trying to set up a vrf for guest networks and am having issues on one of the switches.A quick overview (since I dont really know what i am doing ) we have two sites that are connected via lanex. each site has a 3750. The only internet connectivity is the remote site (so all the users at the local site route out through the remote site to get to the internet)I need to make a guest network at the local site using our current infrastructure but it cannot have any access to our network resources.
I have created a vlan here (vl166) and on the remote switch
ip vrf TRAINING
didnt do any route distribution
then added "ip vrf forwarding TRAINTING" and readded the ip to the vlan interface
gave it an ip address of 172.16.166.1
did the exact same thing on the remote switch but with interface address of .2
enabled ospf on both switches.... router ospf 3 vrf TRAINING
I cant ping from one interface to the other... when I try pinging from the remote switch I get :
CISCO3750MCI-1#ping vrf TRAINING 172.16.166.1
% VRF does not have a usable source address
CISCO3750MCI-1#show ip vrf interfaces TRAINING
Interface IP-Address VRF Protocol
Vl16 172.16.16.2 TRAINING down
I cant see why the interface is down. Nothing in the logs (even when I do no shut... it just accepts the command but doesnt come up)
Where can I fint the flair activesync usb FVsetup file for connectivity between PC to Airflair tablet
View 2 Replies View Relatedi have 50 web IP in my company. i should be share some document, file and software on these all web IP. i should be installed one PC in Windows server 08 R2 and other PC should be installed in Windows 7. how should be share document and file in server 08 R2 system.
View 1 Replies View RelatedI recently pulled apart 2 external hard drives and made them internal hard drives in my computer. They hold a lot of video files as my computer is used as a media centre and is networked to several xbox360`s Using windows media centre around the house. Before I made the Hard drives internal, I used my android tablet with the es file explorer app to browse and move the files around. After they were made internal I was unable to continue to do that and when ever i tried to access one of those drives I got a message saying 'log in failure The account has no permissions
View 6 Replies View RelatedI am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
View 1 Replies View RelatedI am using Compaq Presario CQ41. OS Windows 7. I am connected to other PCs via LAN. My computer name is "Compaq" and the ones that I connected to are named "NEXT" and "TESTING". I am able to access data to "NEXT", "TESTING" and vice versa which means that the LAN is working. I want to share a certain file to "NEXT" but I want that file not to be shared by "TESTING".
View 10 Replies View RelatedI'm having a Strange problem. When i try to Explorer files in a network location by typing \<Computer Name> it does not work, Network path not Found error appears. But i can browse files using IP Address.
1. This Happen only at this particular machine only. I can Explorer files using the Computer name from other machines.
2. nslookup shows the correct IP.
3. I can connect to the file server using Remote Desktop by typing the Computer Name.
I am looking to the best way to add a link to our File server on our network. We have a win 2008 r2 server set up to share a directory for network storage. The storage server has a static IP and the way we access it now it so go to RUN and input "//servername" and it pops up the directory in Win Explorer. This has worked fine but now we are building an Intranet and I need a way to link the Data Storage on the Intranet site.
View 1 Replies View RelatedI want to get the ability to share folders between my PC using a Wireless router. One of the pc's is a Desktop running using XP SP3 and the other is a laptop running Vista SP1. how to set up away to just share certain folders between the two machines?
View 1 Replies View RelatedHow to solve this error in between windows 7(Host) & Windows server 2003(Guest).
View 2 Replies View RelatedHow can I share file to other computer in a home networ? Here is my network configuration: I'm using a Cisco modem with wireless (main) then I connect a D-link router on LAN port to get a better signal in the basement. On the windows 7 I turn ON the sharing setup at the PC on D-link. However the PC on D-link connection doesn't see the other PCs on the Cisco connection.
View 2 Replies View RelatedI am using BSNL Broadband with D-link for wifi network. My pc has windows XP and laptop has windows 7.
How can I share files between pc and laptop ?
I recently bought a Medialink Wireless N router and configured it as per the instructions. I have a desktop computer connected to the router now and it works great with a wired internet connection. However when I try to connect to the wireless network with my laptop, the network does not appear in the available list of networks. The broadcsting SSID feature for the router has been enabled. I am not able to figure out if it is a problem with the wireless network or my laptop, because my laptop has been acting weird lately. Is there a way to test that the wireless adapter on my laptop is working fine. I am able to see other wireless networks on the list. How do I know for sure that my wireless network is set up right?
View 3 Replies View RelatedBasically, the issue I am having is we have a class b network ID of 172.16. We had a new phone system installed last year which needed to be on an isolated network as our switches do not have QoS on them. Plus they are quite bad...
Some genius decided to use the same network ID on the new phone system as our current network but they are totally isolated networks.
This is where my laziness comes into play... We use a laptop connected to the phone system's network to connect to configure the phones etc but I would like to do this at my desk. So what I have done is configured a wireless access point on the phone systems network so I can connect to it on my laptop to theoretically make changes to the phone system on my PC, but also staying connected to our network for obvious reasons... I do have some networking knowledge, and I am assuming the routes are going to be completely wrong because of the same network ID issue not allowing me to connect to the phone system on my laptop. But I am not sure if I can add a static route to resolve this.
Interface List
0x1 ........................... MS TCP Loopback interface
0x2 ...00 50 56 c0 00 08 ...... VMware Virtual Ethernet Adapter for VMnet8
[Code]......
recently i was trying to share files between two computers using a networking switch.(windows xp) I tried using network setup wizard on the host computer it only gave me two drive options f drive and the floppy disc drive. so i selected f drive to copy files. I inserted a cd and clicked next but nothing happened. i tried clicking format button and it asked me to 'insert a cd to f drive' so I avoided the format button.My computer has a backup system which someone installed and im not too sure about it so I was wondering if f drive was referring to the backup system (sort of looks like an external hard drive with lights on it connected to modem) or maybe referring to usb port. I did not try using my usb yet. The second pc I noticed did not have network setup wizard on control panel and was not sure if i needed it. I heard that a router has a firewall and is more safer than using a networking switch. at this stage i dont need internet connection for the second pc
View 1 Replies View RelatedHow do I restore the previous version of a file I overwrote? I accidentally overwrote a file that is on a network. How can I get the previous version back?
View 3 Replies View RelatedI have a desktop and a laptop each using xp. Each is set up to connect to the internet wirelessly, through different networks. I do not wish to disturb those settings.I want to set up a third, ethernet network, linking the desktop and laptop, for file sharing only, no internet.
View 11 Replies View Related
