How to setup 2 PC to write to the same file simultaneous without loosingdata or messing up the data from any two pc in a peer to peer network?Let say a file reside on PC1, both user open a file and edit the same timeand save the data and the file contain both data from both computerwithout messing up the content from either user
View 2 RepliesMy computer will sometimes be connected to the router but internet access isn't available.This is easily fixed by resetting the router, but I was thinking that it would be good to just write a batch file to do it when needed.How would a write a batch file that will restart the router based of the result of pinging an internet site/server.
View 2 Replies View RelatedMy 1140 doesn't write to the config.txt file. I'm not sure why. I have three of these access points that we changed the firmware to make them autonomous. The other two worked fine.
View 1 Replies View RelatedSo I finally got all my parts delivered to setup a home file/backup server this week.
It's currently running Ubuntu Server and I'm using Samba to share files on my network.
The server currently has a 2TB WD Green drive in it connected to a Asus M5A78L-M
This is then connected via CAT6a to my new Gigabit switch (TP-Link TL-SG1005D).
My home desktop is then also connected to this switch and again also through CAT6a cable.
Currently when transfering files I will get a perfect 100MB/s read from the server to my Windows machine. When copying from my Windows machine to the server I get around 30/38MB/s.
I know this drive is capable is faster speeds.
I have found ftp's write speed is much closer to what my Samba read speed is so I'm going to give it a guess that is a software problem rather than hardware
I did a clean install on acer extensa e261 with xp pro. i had to download the audi, vga and lan drivers from acer website. audi and vga is good but the lan driver has no setup or .exe file.
View 1 Replies View RelatedI was curious what is the best way and how to setup a network that can do the following:I have two offices in different cities but I need them to be able to access the same database file.I can easily share a folder in 1 city and have all those computers access it but how can I share the file with the computers at the other city?
View 3 Replies View RelatedI would like to set up a home server, that will sit under the stairs so that it can link to out BT home hub (v3). The idea is then to connect the printer to it, so that we can have both a wireless printer and a central file store for pictures/vids etc.Is XP ok for this? if so, what settings do I need to change/add?Is there any software that I need to make it work?How do I make sure that it is secure for external hacking? As it will contain our personal docs/photos etc and I would hate to use them.
View 1 Replies View RelatedWhere can I fint the flair activesync usb FVsetup file for connectivity between PC to Airflair tablet
View 2 Replies View RelatedI have a Win7 64bit laptop connected to my home network by both 85 mps Netgear Powerline and wifi. On the network are mt BT Homehub router and an Iomega Home Media NAS. when trying to backup photo files (5+ mb) from laptop to NAS I find the write speed become so slow as to be unuseable via Ethernet.
Speeds (Mbps) obtained:
Write Read Connection
8.5 8.9 wifi
0.2 13.8 ethernet & wifi
0.2 14.5 ethernet
I have tried upgrading firmware (currently 2.040) but the NAS seems unwilling to do this. I have also reset the router -- all to no avail.
I want to see log for write on ASA5520. who & when write lastly and who write before. How to see this log. In show vershon i see last modified date, but not log.
View 5 Replies View RelatedI connected my Western Digital Studio II 2TB external harddrive which is formatted NTFS. I can access the drive and read it. But I can't write it. It says I do not have rights. I tried to get to be the owner of the device but it gave some kind of error.
View 2 Replies View RelatedI have a new laptop and had a dlink DIR601 installed on an older laptop. I wasn't the one who got it set up originally but they did have me write down my SSID, password and security key. The dlink came with a cd but there is no cd rom on this laptop. I have tried reset, on line download (which only let me do the revisions). I have talked to a few people and they say it's easy!
View 1 Replies View RelatedWhen I make changes to the config of my ASA 5505 and write mem (or use the ASDM to save running config to flash) the changes are not being saved.
Is this going to be a problem with the Flash Memory on the device?I have successfully saved config on this device in the past, which is why I am thinking it might be a problem with the flash memory.
my ASR1006 router with the IOS ver:
Cisco IOS Software, IOS-XE Software (PPC_LINUX_IOSD-ADVENTERPRISE-M), Version 12.2(33)XNE, RELEASE SOFTWARE (fc1)
is restarting again and again when I try to write the configuration.
I am working on a Drupal site which is on a virtual server (the way it's been explained to me). I've been told I need to work with it through webdev. So I can copy a file off the server and onto my local machine. I make my edits and then try to upload it to the server. I get locked out with the message: Error 0x80070021: The process cannot access the file because another process has locked a portion of the file. I have tried shutting down my code editor, opening and closing the connection, tried different methods of reaching the server (Cyberduck and through Window's map network feature) to no avail. What can I do?
View 1 Replies View RelatedI have a Windows Home Server 2011 box sitting at home in Washington DC. I have about 1TB worth of stuff on that box. For many reasons, I want to store all my data in a centralized location (that being my WHS box). I then want to access that data through my laptop in London as if the data was in a folder on my computer. I also want to access the data through my mobile phone (android).I just set up filezilla on my WHS box and it works fine if I want to download or upload data. But it won't let me open word files 'off' the server, make changes, and then save it right back. I have to download the word file, make changes, and then reupload that file to the server.
View 3 Replies View RelatedDoes any know the meaning of this log message in a 7609 router - "SP: FAILED to write to DS1338 RTC device"?
So far as I can tell DS1338 RTC is supposed to be a (linux-related?) clock but I don't see how that's related to the.
My client has had to replace their ASA 5510. Upon importing the image to the brand new ASA they are unable to write to the flash.
They have run fcsk disk0: to no avail. show file system show 0 and 0 for Flash size and Free space on disk0.
Is there anything that can be done, short of formating flash and trying to reinstall the image? I have asked them to reload the ASA but they are reluctant to do so as they don't want the site to lose connectivity.
recently i was trying to share files between two computers using a networking switch.(windows xp) I tried using network setup wizard on the host computer it only gave me two drive options f drive and the floppy disc drive. so i selected f drive to copy files. I inserted a cd and clicked next but nothing happened. i tried clicking format button and it asked me to 'insert a cd to f drive' so I avoided the format button.My computer has a backup system which someone installed and im not too sure about it so I was wondering if f drive was referring to the backup system (sort of looks like an external hard drive with lights on it connected to modem) or maybe referring to usb port. I did not try using my usb yet. The second pc I noticed did not have network setup wizard on control panel and was not sure if i needed it. I heard that a router has a firewall and is more safer than using a networking switch. at this stage i dont need internet connection for the second pc
View 1 Replies View RelatedDid not write down the KEY for my wireless router...a CISCO/LINKSYS E1200. My old router had an HTTP address I could type in and access the router and read the security setings.....what http do I type in to read key on this wireless router?
View 11 Replies View RelatedI am trying to FTP a 25MB file to a client using FileZilla and my wired WRT310N router. In the past I have never had a problem but now I am getting the following error: Could not write to transfer socket: EPIPE - Local endpoint has been closed.I changed the MTU to manual - 1500 on the router.I am using an almost brand new iMacThe iMac firewall is OFFTimeout in Filezilla is set to 0.The transfer stops at about 12MB everytime I try; which is ~ 35 seconds.
View 6 Replies View RelatedI need:
cisco 2811 IOS CA as server
cisco vpn client + etoken (aladdin) as client
certificate enrollment from cisco vpn client and vpn connection with it works at present, but I don't know how to use etoken with it, how to write the client's cert. to a token.i used this doc:Configuring IPSec Between Cisco IOS Routers and Cisco VPN Client Using Entrust Certificates[URL]in chapter "Certificate Enrollment for the Cisco VPN Client", in section 3 there is a screenshot with an example of a certificate enrollment, where the specified name (CN) as vpnclient, but in section 5 "view the certificate ", common name specified as Joe Smith, etc.where this client's data is obtained? it's not clear to me... how to generate and write a client's certificate on etoken, who uses cisco vpn client with it for connect to server?
i have one Cisco 3750, am using it as Core Switch where i have 6 more access switches are connected deirectly, and we are using VLANs in our network with the IP reange of 172.16.0.0 , now we had a new Internet connection which is dedicated to Exchange Server only.So we have TWO internet connection One for internet access to all users and another one for only Exchange Server.internet connection for the users is termiated at a Cisco 1700 Series Router and Internet for Exchage Server is terminated at a Cisco ASA Firewall.Now the problem is how can i write an access list, which says that all packets from Exchange server should be routed to ASA Firewall , and all other packets shoulde route to Cisco Router.IP address os Exchange server is 172.16.2.1, 172.16.2.2.
View 13 Replies View RelatedAfter I added the 3rd 3750E to my stack on Sunday I can no longer save my configs with 'copy run start' or 'write mem':
#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
nv_done: unable to open "flash:/config.text.new"
nv_done: unable to open "flash:/private-config.text.new"
nv_done: unable to open "flash:/multiple-fs.new"[OK]
[code]....
my flash seems to have plenty of space:
57409536 bytes total (24203776 bytes free)
Lets say I have a group of interfaces on a Cisco 3560. Lets say it is interfaces fa0/13-fa0/24. Is there any way to write a script so that I can shut or noshut all these interfaces at once?
Basically I want to be able to easily turn the ports on and off all at once as they are only used a couple of times a week but when they are used they are all used at once. When they are not in use I do not want to be dishing out our internal network to anyone who may wander into the area.
Region : Russia
Model : TL-WDR3600
Hardware Version : V1
Firmware Version : 3.13.23 Build 120820 Rel.73549n
ISP : VIMPELCOM
I have portable hard disk connected to one of the TL-WDR3600 router usb ports (another one has printer connected to it)
Write speed is about 3Mbytes/sec maximum.Real disk write speed is about 35-38Mbytes/sec - if I connect it to one of the PC USB ports (both router and PC ports are USB 2.0)Why write speed via router is so low?
My PC is connected to router via cable and is running Windows 7 32bit Ultimate SP1, hard disk partition is 465Gb NTFS single volume.I'm measuring speed simply by coping 1.4Gb file through Windows Explorer to \tplinklogin.net (following USB storage access instructions from router control panel) in first case and directly to hard disk - in second case.
i never see this before, but on newly purchased just configured firewall.when i do wrtie standby.All interfaces on standby unit flaps.is it some IOS bug? my firewalls are [code] what could be the reason? FYI i am using LAN base failover and not doing any statful fail-over.
View 3 Replies View RelatedHow to write ping tcl script on nexus 7000?
View 5 Replies View RelatedI have a cisco PIX-515e which i have connected to a emulator through the console port, and im having trouble erasing data from it.
I can get into 'pixfirewall' mode and 'monitor' mode but thats as far as i get. i have tried 'write erase' and 'configure factory-default' in both modes to no success.
I bought a seagate USB hard drive today from Target. Its a 2TB and I was going to use it via USB attached to my router. I connected it and the Linksys firmware detected it and I was able to create the appropriate folders on the drive for storage through the linksys GUI.My issue is that I am now trying to move my movies and tv shows over to the drive and it isn't allowing me to do that.
I get an error message that says "You don't have access to //myshare. contact your administrator".
I'm not sure why I was able to create folders on this drive but am unable to move files to it. Makes no sense to me. Write permission is write permission no?My machine which currently stores the media files is windows7 utimate. The router is E3000 using up to date stock firmware.
If I try to set a torrent download to write directly to the USB drive on my E3000, it only works for a few minutes (at low speeds) and then I lose access to the drive and the torrent stops. I can access the drive again less than a minute afterwards.
It'd be handy to be able to write torrents straight to the USB drive instead of having to move the completed files to it after the torrent is finished.
I got trouble when tried to save configuration by 'write memory' command.
cisco WS-C2960-48PST-L (PowerPC405) processor (revision G0) with 65536K bytes of memory. Cisco IOS Software, C2960 Software (C2960-LANBASEK9-M), Version 12.2(52)SE,RELEASE SOFTWARE (fc3)
Cat2960#wr
Building configuration...
% Warning: Saving this config to nvram may corrupt any network management or security files stored at the end of nvram.
Continue? [no]: no % Configuration buffer full, can't add command:
After this message continue typing "yes" sometime that switch reload all times. The service compress-config command is not available anymore.
I have a stack of 3750x switches running 15.0 (2) SE2 IOS. When I reload the switch stack, I am seeing the following message in the logs: IPv6 user port trust TCAM write failed.
View 2 Replies View Related