Getting An Error 651 On Windows 7?
Dec 11, 2012Any simple solution for error 651 on windows 7 ?
View 1 Replies
ADVERTISEMENT
Windows 7 PPTP VPN Error 807 And 800?
Mar 21, 2011don't steer the topic from PPTP to IPsec and other types of VPN which is more secure than PPTP,,,,etc have got this scenario windows 7 is acting as vpn client at home and windows XP is acting as vpn server at workAt home (LAN address is 192.168.10.x/24)And I configured windows 7 as VPN client same as here [CODE]
View 6 Replies View RelatedAAA/Identity/Nac :: ACS 5.4.0.46.3 Windows Error
Jun 4, 2013I have the message error in my ACS 5.4 after migrate the versión (5.3 to 5.4)
View 2 Replies View RelatedWindows 7 - No Internet Connection DNS Error?
Apr 21, 2011what should i do i have no internet connection at all but just under time warner cable, im running a laptop with windows 7 .i had try everything but no luck im thinking it maybe incompatibility with the modem/router
View 3 Replies View RelatedNetwork Connection Error In Windows 7
Jan 29, 2011I have 3 laptops running through a wireless lan. All laptops connect to the router, and 2 of them connect through to the internet. One of them will not connect to the internet. I have tried using an ethernet cable connection, and this did not work either. The more worrying thing for me (not being so computer literate) is that I could not even get a response when I pinged the modem when it was connected with a cable to the PC. The network sharing centre says that I have a default gateway access issue or that "wireless network connection" doesn't have a valid IP configuration, I have lost the ability to print with wifi and my Sonos system now no longer connects. I also get a media disconnected message when I do an ipconfig.
View 8 Replies View RelatedCisco :: Installing LMS 4.2.3 For Windows Error?
Dec 23, 2012im trying to install Cisco prime LMS 4.2.3 for Windows 2008 R2 standard x64.however i have received this error message.
----- end of Dependency Handler Log File
-----Dependency Handler Errors
ERROR: csjre not found
ERROR: Component csjre is not found.
cdone : depends on :csjre
----- end of Dependency Handler Errors
[code]....
Windows 7 No Longer Likes 2000 / Log On Error
Feb 29, 2012I have a windows 7 computer and a windows 2000 on a wired network. The windows 7 and 2000 previously played nicely although it was a bit of a pain to get it to work the first time, don't really remember what the issue was. I have a big old CAD plotter connected to a parallel port on the windows 2000 computer and previously was able to use it from the windows 7 computer. I was also able to access any file on the windows 2000 from windows 7, it all worked fine a few months ago. I haven't had the win 2000 computer on for a while but recently needed to use the plotter. I now get a log-on error when trying to access the win 2000 from the win 7, but it shows up on networks. The log-on error window shows a domain with the name of the windows 7 computer listed as the domain name, but nothing is set to be on a domain. I can access the files on the windows 7 computer from the win 2000 computer with no issues in that direction. There is no home group set up (think that was the issue the first time) Windows 7 is always updating itself and I suspect that's part of the problem, I am guessing something went back to a default during an up-date but I can't find it.
View 3 Replies View RelatedWindows Cannot Connect To Printer Error 0x0000046a
Jun 11, 2011Running Windows 7 32-bit on remote system and Windows XP 32-bit service pack 3 on system where printer is connected by USB cable. printer is HP Color Laserjet CM1312nfi. Windows 7 driver is loaded on remote computer.
View 1 Replies View RelatedError - Windows Could Not Setup Internet Connection?
Mar 14, 2011I m facing Internet sharing problem in windows 7, when I m creating wireless adhoc network, so that on other(wi-fi enabled) system, I can use internet, At that time error like' Windows could not setup internet connection sharing' appears...
& after pressing ok... when I m doing it mannually( By going to the Properties of local area network-> then in Sharing tab option ] when I m selecting checkbox for internet sharing at that time error comes like' An error comes while internet connection sharing was being enabled The dep[endency service/group failed to start '
Can't Network Windows 7 With XP Home - Login Error
Sep 3, 2011I have 2 PC at home and would like to network them together so i could share the resources between them. But i could only manage to setup 'one way' - the XP Home could access the Windows 7 Ultimate but not the other way Whenever i double click on the XP Home, it will prompt me to login. But no matter what i enter, it will say its wrong. What weird is the 'domain'. The login dialog will show that im login into 'Domain: Windows7PC' when im trying to login into the XP. And after i have enter 'wrongly', it will show the username as 'Windows7PCusername' and ask to try again - it means im login into the Windows 7 And if i try to prefix the PC's name in front - \WindowsXPusername then it will prompt \WindowsXP is not accessible..... The specified username is invalid
Here is my 'settings'-
Windows 7 Ultimate SP1
Windows XP Home SP3
Both is on the same Workgroup/IPGroup/Netmask
Both has File & Printer Sharing Enabled
Have patch XP with KB922120v6
[code]....
Windows 7 Error Network Cable Unplugged
Apr 11, 2011Windows 7 Home Premium Service Pack 1 RealtekPCIe GBE Family Controller With no apparent change in software or configuration, I am getting the 'Network cable unplugged' error. The cable connects another PC just fine so both the cable and router are OK.
View 4 Replies View RelatedWindows 2008 R2 Server - Error 105 For Gmail Only?
Mar 8, 2013I run a tiny home domain with 1 Windows 2008 R2 server and 2 clients (one for me and one for the hubby). Our server is DC, DNS, and DHCP server (and some other roles). Our clients are both Windows 8 but we use the standalone Chrome installation, version 25.0.1364.152 m.The problem is that on my Windows 8 client, every once in a while (not the same time period each time, but roughly every 6-15 days) I get the error in the title on one site when using Chrome only, which is Gmail. I can access and resolve Google and every other site, and my DNS server itself can resolve Gmail, but not until I flush the DNS of my local client will Gmail work again. Also strangely, I have left it on the morning when it happened before, and when I came home from work it had sorted itself out. The other client, hubby's Win 8 PC, also sometimes gets this issue, but not nearly as often as I do. Flushing the local DNS cache resolves it for him as well.
I used my ISP's DNS servers for forwarding initially, but changed to Google's 8.8.8.8 and 8.8.4.4 when this kept happening, and it didn't seem to make a difference. I've enabled scavenging and aging and all sorts and those are faithfully renewing themselves as expected, but as the problem only lies on the clients and never the server, I'm quite lost as to what to try next.I've had a look on the Chrome forums (gulp) and nothing seems to be as specific as this fault
Belkin Routers :: Using Windows 8 And Getting Error 0x80040742?
Feb 25, 2013I'm using Windows 8 and getting error 0x80040742
View 1 Replies View RelatedCisco :: Error During LMS 4.2 Installation On Windows 2008 R2
Jan 28, 2013I am installing LMS 4.2 on Windows 2008 R2 standard edition 64 bit. During installation its showing the following error.And I am not able to proceed the installation.
View 1 Replies View RelatedCisco VPN :: ASA 5510 Cannot Connect - Windows ME Error 809
Aug 21, 2011I have a cisco ASA5510 and I'm having fun experience some configurations.I can not connect to VPN, windows me error 809. I configured the firewall to accept connections to microsoft L2PT/IPsec client by authenticating users on the domain controller LDAP.
Clientless vpn connection work, so the server connection is correct. [Code] ......
Windows Vista - Domain Name Server Configuration Error
Jul 21, 2011I can't seem to get the browser to properly show spacing.So I was browsing the internet normally, then all of the sudden, I'm disconnected. When I reconnected, I was able to access the network, but unable to connect to the internet. After attempting to diagnose the issue, I got the "There may be a problem with your Domain Name Server Configuration."can't connect to well known host microsoft.com.
View 9 Replies View RelatedMicrosoft Windows Network Error - User Name Could Not Be Found?
Nov 3, 2011I have a server computer running Windows Server 2008 R2 Standard operating system with 4 client computers connected to the network running Windows 7 Professional operating system. All worked great yesterday. This morning, one of the client computers encountered this error:
An error occurred while reconnecting F: to \SERVERData
Microsoft Windows Network: The user name could not be found.This connection has not been restored.No updates or changes have occured between yesterday and today and the three other client computers have no similar problems.Just this one client has the error.
Cisco VPN :: Error 442 Client 5.0.07.0440 In Windows XP 64 Bits SP2
May 22, 2011running cisco VPN client over Windows XP SP 2 64 bits.
I get the error 442 Failed to enable the virtual adapter. I have seen a number of solutions, but can not find solutions or workarounds for Windows XP 64 bits.
Cisco VPN :: Dell E6410 Laptop / VPN Error 412 - Windows XP SP3
Jun 6, 2011I've got a work laptop (Dell E6410). Now I should qualify I'm a member of my employers IT Service Desk and I'm trying to discover how to fix this problem as its becoming more and more common (to the point we've even opened a Problem Report PR) but I'm unsure if the network ops team have contacted the TAC for support.
What I've done in the VPN client is set "LOG LEVEL 15" against everything so it spits everything out for diagnosis. This laptop I have 2 weeks ago was fine, since then its been spitting 412 error. And its beginning to frustrate the userbase.
- Laptop types: Dell E6400/E6410/E4310
- Connection Types: WiFi, Cabled or NextG mobile devices.
- VPN Version: 05.00.0003.0560a
- VPN Type: We use Group Authentication for the profile, then RSA + Domain login on the other end.
- OS: Win XP SP3
What have we tried:
- Deleting and recreating the RSA SecurID account for the user
- Reimaging the laptop
- Reinstalling the VPN
- Repairing the laptop
- Recreating the *.pcf file for the profile.
Originally I had found if using a NextG device and turning off the WiFi it would stop the 412 error but that has stopped working as a workaround and I've tried on both a cable connection (Direct to modem) and direct to my routed/switched network at home. Same error on 2 different types of internet connection.
In the log when I set L15 debugging I found....
148 17:29:10.890 06/07/11 Sev=Warning/3 CVPND/0xA340000DThe virtual adapter was not recognized by the operating system.
149 17:29:10.890 06/07/11 Sev=Warning/2 CM/0xE310000AThe virtual adapter failed to enable
356 17:29:33.453 06/07/11 Sev=Info/6 CM/0x6310003AUnable to restore route changes from file.
357 17:29:33.453 06/07/11 Sev=Info/6 CM/0x63100037The routing table was returned to original state prior to Virtual Adapter
[code]....
I will try and find out what kind of end-point we have. But reading those snippits its like trying to activate the virtual adapter but can't seem to do it.
Dell Laptop Error Code - 0x80070005 Running Windows 7
Jul 6, 2011I have a new Dell laptop inspiron runningwindows7,I get a error message when I try to access folders on network computer, a classroom network.
View 6 Replies View RelatedUnidentified Network Error - Windows 7 Computer With No Internet Access
Nov 24, 2011My windows 7 computer was connected to my home's wireless network yesterday perfectly normally. I drove last night to my mother's house and proceeded to connect to her own wifi router wirelessly. Although my sister's computer that's on windows 7 connects ably, and both our iPhones connect, my computer will not. My computer finds the network( it is unsecured without a password if that makes a difference ) connects, receives an ipv4 address in ipconfig, yet does not obtain Internet access. It labels the network as an "unidentified network".
View 2 Replies View RelatedLinksys Wireless Adapters :: Wusb100 Installation Error 211 On Windows 7
Jan 9, 2012I am having trouble installing the wusb100 adapter on a Windows 7 Pro 64 bit machine. I have downloaded the updated files and when I go to install the software, I get to the section that says, "plug in the adapter." At that point, it says it can see the adapter and it sits for 3 minutes trying to complete the install. The I get error 211 which says the adapter is plugged in wrong and to try again. I notice that the adapter is set up with drivers in the Hardward Management area of Windows, however, I cannot access the adapter to set it up. Thoughts? I have also tried to manually install the drivers but they are installed. The trouble is I can't see the adapter.
View 2 Replies View RelatedCisco VPN :: Any Connect 2.5 Windows 7 64bit Startup Services Error
Sep 13, 2011I recently got a new laptop with Windows 7 running 64bit OS. Setup the laptop with no firewall and no Antivirus programs. After installing the Any connect 2.5 VPN application I was able to successful connect to our ASA. I noticed if my laptop went into standby mode or if I rebooted the laptop the "Cisco Anyconnect Agent" is not running under service even though it is set to Automatic.
I have uninstalled and reinstall with no success and have even tried the new version 3.x with the same result. If I go into services and start the anyconnect agent I can launch the application and connect to my company with no problems. I was able to replicate this issue on a co-workers new laptop running Win7 64 that has no applications on it.
Cisco Routers :: Windows 7 32 Bit IPSec Client To RV220W Error 789
Oct 9, 2012I try to connect to RV220W with windows 7 client but I fail : error 789. I compare again and again pre shared key, but it doesn't change anything. How to connect to RV220W with IPsec client ?
View 4 Replies View RelatedCisco VPN :: Authentication Error 5505 8.3 Setup Client Vpn To Windows
Nov 6, 2011I'm trying to set up a 5505 (running 8.3) so that i can use the client vpn through RADIUS authentication.I have set up a new local RAIDUS windows box and used the ASDM asistant and a few other guides to setup the 5505.
View 3 Replies View RelatedDell :: Windows Error Using WLAN 1350 Mini PCI Utility
Nov 23, 2006Laptop D800 with WLAN 1350 mini PCI wireless adapter The wlan 1350 was working fine until I updated the wlan drive to ver 4 and the new wlan utility In our office we have about 27 D800 and we need to use a specific mac address in order to access the network with ver 3 I was able to change the mac address from the registry or using a 3rd party utility ie smac 2.0 without any problem now after I updated the wlan 1350 driver and the wlan utility the minute we change the mac address we get windows error – wlan error and must be close etc I narrow down the problem to the waln utility if I unistall the utility no more error.
View 3 Replies View RelatedWindows 7 On A Toshiba Satellite Laptop - Internet Connection / DHCP Error?
Nov 1, 2011When I connect to my home network, I get 'No Internet access.' I am running windows 7 on a Toshiba Satellite laptop. I should also mention that my Xbox 360 won't connect either, but both of my friend's laptops as well as my phone do connect to our internet. Also, using my phone as a wifi hotspot works intermittently.
When I do ipconfig /release it says the following:
An error occurred while releasing interface Wireless Network Connection : An address has not yet been associated with the network endpoint.
No operation can be performed on Local Area Connection while it has its media disconnected.When I do ipconfig /renew I get:
An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out. No operation can be performed on Local Area Connection while it has its media disconnected.
Ipconfig /all gives me:
Windows IP Configuration
Host Name . . . . . . . . . . . . : Siggy-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid[code].....
Linksys Cable / DSL :: Wag160N V1 - Error In Event View In Windows 8 DHCP
Nov 24, 2012The WAG160N V1 you can change the dns primary default router for the connection "alice adsl 7 mega"? I would like to change it because in widows8, I keep giving every time the system event log, the error: "The computer was not assigned an address from the network (from the DHCP Server) for the Network Card with network address 0xF07D686CB987 . has encountered the following error: 0x79. Your computer will continue to make further attempts to obtain an address " I checked with the ping and the first two dns 85.37.17.15 does not work, while the second works 85.38.28.74. how to configure the DWA140N rev.B2 the property is currently configured as follows: IEEE802.11h = Disable Multimedia / Gaming Environment = Disable Country / region (2.4 GHz) = n. 0 (1-11) Country / region (5 GHz) = n. 0 (36-64, 149-165) Radio on / off = Active Selective Suspend = Disable Selective Suspend idle timeuot in senond = 5 Sensitivity roaming = Disable (options, max, min, average) Ad hoc support 802.11n = Disable
View 3 Replies View RelatedCisco Switching/Routing :: 3750 And 3560 - IP ARP Inspection Error In Windows 7
Jun 14, 2010We have ip arp inspection and dhcp snooping enable in couple of 3750 and 3560 switches. Everything works fine, excepted few case that DAI packet rate trigger and errdisable the port. Later on we found out that most of computer that trigger DAI is Windows 7 and especially when they are in sleep mode. Not sure if anyone experiencing it with Windows 7. Also we have it rate limit at 64.
View 2 Replies View RelatedCabling / Cards :: MTS Browser Zte AC8720 Data Card Installation Error In Windows 8
Feb 25, 2013I have the Mts Mbrowse ZTE AC 8720 data card. it has problem in installing in windows 8 but it works properly in window 7. It has an error fail to install access serial port 0. i didn't understand the error.
View 1 Replies View RelatedWindows 7 - Error Code 0x000005b4 / Operation Returned Because Timeout Period Expired
Nov 1, 2012I got this error this operation returned because the timeout period expired error code 0x000005b4
View 1 Replies View RelatedNetgear WNR612 Wireless Router - Network Error Message Saying Windows Has Detected IP Address Conflict
Jan 5, 2013I have a Netgear WNR612 wireless router, which worked fine for a few weeks. Then something happened and I can't keep the connection anymore. It happened right after I used iTunes to update my iPhone, perhaps a coincidence, but I'm mentioning that just in case. Internet still works fine with ethernet cable straight from the computer, only the wireless connection doesn't work. This happened about a month ago and I haven't been at home much to fix the problem. I have turned off and unplugged everything for several days at a time while gone. I get a Network Error message saying, Windows has detected an IP address conflict. I have tried restoring the router back to factory settings and reinstalling the wireless card. I have tried changing the IP address settings both in the Network and Sharing Center and the router admin page. What I think I should do is change the IP address in Command Prompt, but when I type "ipconfig /release", it says "No operation can be performed on Wireless Network Connection 2 while it has its media disconnected" and the same for Local Area Connection. I don't understand what this means, because there is a wireless key in my keyboard and there is a white light (not orange) like there should be. Also in the Network and Sharing Center, I can see that the connections are enabled.
View 14 Replies View RelatedCisco Switching/Routing :: Input Error And CRC Error On Router 1841?
Mar 12, 2013The router 1841 is connected directly to the layer switch. the network diagram is below:
Office A --> Switch (L3) --> Router 1841 --> Internet --> Office B
However, when I transfer the file from Office A to office B, the speed very slow ( only around 40 kb/second), and there are an input error and CRC error:
Cisco-R1841#sh interfaces FA0/1
FastEthernet0/1 is up, line protocol is up
Hardware is Gt96k FE, address is 0019.e02f.03dd (bia 0019.e02f.03dd)
[Code]......