HG-521 Router Syncing At 8724kbps - Slow Page Loading?
Mar 15, 2013
I have a HG-521 router which is syncing at 8724kbps, but it is slow loading pages. My isp is talktalk .
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 32 bit
Processor: Genuine Intel(R) CPU 575 @ 2.00GHz, x64 Family 6 Model 15 Stepping 13
Processor Count: 1
RAM: 3063 Mb
Graphics Card: Mobile Intel(R) 965 Express Chipset Family, 2 Mb
Hard Drives: C: Total - 114370 MB, Free - 56821 MB; E: Total - 99 MB, Free - 61 MB;
Motherboard: ASUSTeK Computer Inc., X58L
Antivirus: avast! Antivirus, Updated and Enabled
View 5 Replies
ADVERTISEMENT
Oct 23, 2012
When my wife gets chemo, we spend the day at the hospital, and I login to their WiFi as a guest. When I do, I make a connection with no problem, but after the initial page comes up, additional pages load very, very slowly regardless of what browser I use (Chrome, Firefox, or IE). I don't have that problem on any other network. Moreover, other users on that same hospital network can login as guests without encountering that problem. So, the problem is not browser-related, and it occurs only when a single laptop connects to a specific network. I'm using a Dell XPS 16, running Windows 7 Pro with Windows Firewall.
View 2 Replies
View Related
Mar 24, 2013
It's' my first router (E 2500) one desk top and two laptop and also a Ipad connected, every thing look fine exept for the Ipad.Lots of page not fully loading, I have to reload couples of time to get it full load. and lots of Youtube video said not presently availale but work fine with laptop or desktop.Did not change any seting on the router, I just plug it and used it
View 9 Replies
View Related
Mar 14, 2012
I have on Desktop wired to the router which is my main pc. When I access internet the website load really slow, but when I connect the pc directly to Comcast modem, it's blitz fast. My internet speed is 15 Mbps. I have another desktop and laptop. None of them have the problem. What settings I have to change to get back to speed I used to have before.I messed up some settings on the Cisco Connect and accidentally reset the router. After re-installing the router the problem started.
View 9 Replies
View Related
Jan 21, 2013
I receive the following error message:The connection was reset The connection to the server was reset while the page was loading The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.I am unable to connect to Facebook on my home computer, but can visit any other site with no problems. I can access Facebook from my work computer. I am using Firefox on both. I only use wifi as I only have a laptop and my router is in my office. I can access Facebook on my phone with my wifi enabled. I have not tried a direct wired connection (will try that next and let you know what happens) as I don't use my office, because it's currently full of junk.
Clearing the cache and cookies
Reinstalling Firefox
Updating Firefox
Changed Firefox proxy settings to "no proxy"
Resetting my wireless router
Checking the Hosts file for facebook entries (there are none)
And still no access. The only way I have been able to access Facebook is by turning the firewall off on my wireless router (Belkin Wireless G). I don't want to have to turn the firewall off just to go on facebook. I am the only person in the house who uses a computer and the internet. So settings have not been changed, because I am the only person with access to change them (password protected wireless network as well).
View 3 Replies
View Related
Nov 20, 2012
Router interface for N450 DB fails to load/loads slowly/loads partially. I am running Windows 8, and have tried IE10 both from Start Screen and desktop, no luck.
View 4 Replies
View Related
Nov 19, 2012
I'm performing a migration from an ASA5520 running version 8.04 to an ASA5525-X running 8.6.
The issue I had was that whilst all of the SSL VPN portal configuration was migrated the initial portal page does does not load. I thought that this could be to do with ASDM and WebVPN both being enabled on the outside interface and so I tried changing the port used for ASDM and disabled the ASDM altogether on the outside - but still to no avail.
Could this have something to do with the fact that you can no longer just point your browser at the outside interface of the firewall to get to the ADSM? Does some configuration need to change for the ASA to accept connections on the outside interface?
The basic WebVPN access as it stands right now is:
webvpn
enable outside
anyconnect image disk0:/anyconnect-win-2.5.2014-k9.pkg 1
[Code].....
View 3 Replies
View Related
Feb 28, 2012
Just purchased a SG300-52 and am trying to upgrade the firmware to 1.1.2 but cannot get the Upgrade/Backup Firmware Language page to load in the web browser interface. I have tried IE 8 and 9, Firefox 3.16 and 10.02, and Chrome from Windows 7 and XP Pro systems also tried FF and Chrome from Ubuntu system. The page just never loads - doesn't show anything.The same is true of the Download/Backup/Configuration/Log page. The other links under Administration > File Management seem to work fine.
View 1 Replies
View Related
Jun 10, 2012
seems my PC is having problem opening Facebook page. It doesn't matter if i use ChromeFirefox or Internet Explorer or if it is mine, my friends account or even not logged in, it hangs about 4 minutes, then it loads and then stops responding for another 4 minutes in all browsers simultaneously. I can use it maybe 15 seconds before it stops again for another 4 minutes. Even on 9gag, page opens normal but chat also hangs because its connected with facebook...-_-My internet connection is fast, 10MB/s, and all other pages work splendid!My pc spec: Phenom B60 x4 3.4Ghz 4GB RAM, ATI 6870, 500GB HDD 7200rpm. It is manintained good, every 15 days i run malwarebytes, spybot, avast free for custom scan and disk defragmenter.I often get this error: Error 7 (net::ERR_TIMED_OUT): The operation timed out.also this but rarely: Error 101 (net::ERR_CONNECTION_RESET): The connection was reset.[CODE]
View 19 Replies
View Related
Dec 4, 2012
MSI netbook. It used to be very loading pages but now is is very very slow and has been for a month or so.
View 4 Replies
View Related
Jan 21, 2013
Iam running Windows XP sp3 ,firefox browser and my router and modem are fine. iam getting transferring /waiting for 5 minutes before it loads. each transaction on the page takes minutes. Ive disabled/repaired/enabled internet connection" several times with no success. Where can I look in my system?
View 2 Replies
View Related
Jul 2, 2012
I've just recently upgraded a Cisco 877 to 887W router.
I basically copied most of the config across to the router with no problem.
ppp chap hostname and password all ok. ATM and Dialer1 interface comes up.
The problem I'm having is when I open Internet Explorer up, default homepage is Google. Google loads up fine, type a search is fine but when you click on the link or type URL, for example BBC News or Sky Sports, it takes a long time to load or times out (Page cannot be displayed)
DNS servers configured on Cisco router are: 8.8.8.8 and Virgin's DNS servers.
NSLOOKUP in cmd prompt it returns IP add no problem. however in web browser it fails except for Google.
However, with the same config on a 877 everything works perfectly...
Cisco 877 running 12.4
Cisco 887 running 15.0
View 18 Replies
View Related
Mar 7, 2012
My wireless connection says i have full bars of signal. When I do a speed test, i get 500-600 kb/s download. Which is what I used to get. However, after I re-installed my wireless adapter's card, the wna3100 netgear, it became extremely slow.
Pages would load slow, I could no longer play League of Legends properly because the ping is too high. Also, I used to have crossfire graphics cards running and the internet was fine, but after reinstallation, I thought I'd turn it off because that's how I fixed it before. But now, even with just one graphics card running, the internet is extremely slow.
[code]...
View 14 Replies
View Related
Mar 29, 2012
I just bought a XPS 8300, I use Google Chrome for a browser, cable modem internet connection, and quite often, web pages will not load quickly, or will take a couple of reloads to load properly. Any advice on how to cure this annoying trend of mine?
View 1 Replies
View Related
Mar 5, 2013
I recently bought a Cisco SG200-26P and now loading webpages are sometimes very slow or don't load at all.I have to refresh to page to load at all and sometimes even restart safari to load the webpages.I have this on several macs and ipads.
View 3 Replies
View Related
Nov 16, 2012
I have a Dell Inspiron 2320 computer. I have only had it for 9 months and it is running extremely slow. If I click on a website, it takes forever to load up. When I get frustrated from waiting, I'll hit CTRL + ALT + DEL and go to task manager. When the task manager pops up, all of a sudden the website that I was trying to load, will finish loading. It is very annoying. The computer is only used for searching the internet, a little bit of internet banking, and a few books have been down loaded from amazon to a kindle.
View 2 Replies
View Related
Dec 11, 2011
So I have a really neat computer sitting here, 2500K, P8z68-v, samsung 830 64gb ssd, corsair vengeance 16gb, deskstar hdd, firepro v5800
I have a non-descript trendnet 56K v.92 dial up modem installed to pci slot1 on my mobo.The phone company says they can't get a quicker connection than 31.2 Kbps established to dial up users in this area.The real issue is the data transfer rate.I have seen it reach as high as 6.xx Kbps but generally hovers around 2.5 Kbps.Now it is down to 1.xx Kbps and I took the last 48 hours downloading all the updates for windows and several other updates for hard ware etc.Now I need the ATI firepro update and 114 Mb will take over 16 hours at my average speed, and some 32 hours at the new slower speed
View 17 Replies
View Related
May 23, 2012
I have a 2911 router with some cisco 2950 switch WAN is 4Mb fiber Why open a Web page is very slow. [code]
View 5 Replies
View Related
Jan 24, 2011
Lenovo T61P
Win 7
Wireless Connection (Router Linksys WRT54G2)
I installed Comodo's Firewall and during installation I accepted to install the Secure DNS too. Afterward I noticed my web-pages loaded slower than usual. They weren't extremely slow but definitely slower than what I've been accustomed. I tried some OPENDNS servers and others to see if it made any difference but it didn't. I also went to my router's setup page((http://192.168.1.1/)so I could manually add the previously mentioned DNS servers. I finally decided to revert back to my old DNS list. To disable using the Comodo DNS servers I did the following:Wireless Network Connection Properties-> Internet Protocol Ver 4 (TCP/IPv4)-> Properties -> Select "Obtain DNS server address automatically"I also went into to my router's setup page (http://192.168.1.1/) to set my DNS list to zeros so that I can get back my default ISP's DNS servers (207.69.188.185,186,187). However, website loading is still sluggish.I thought the issue might just be a temporary hiccup from my ISP but my roommate doesn't have these issues. We tried a speed test at dslreports.com and the results were weird. On my laptop the results were 8500+ Kb/s with a 279ms latency. I was 10 ft away from my router.
View 4 Replies
View Related
Sep 7, 2011
my internet speed is fast but page loads very slow
View 1 Replies
View Related
Jul 28, 2011
i need to get into the web page because i need to open my XBL nat and when i type in the password to get into the routers page i get a blank screen
View 2 Replies
View Related
Oct 23, 2011
I turned on my PC and started using Facebook normally, it was a bit slower than usual and then suddenly, it didn't load anymore. I tried more than once, but then it started loading only text on the left side of the page and I couldn't use it practically. This happened also with Yahoo, but I didn't see it happening with some other websites, they work totally normally.I stress I have tried clearing the whole cache and history of Google Chrome and Mozilla Firefox, system restore, check of sfc.exe, creation of new user account, running of an Ubuntu LIVE CD, uninstallation of all browsers and installation of the latest versions once again, changing of the MTU to 1500, turning off my router and antenna but unfortunately nothing has worked till now.What wonders me is that Facebook works normally on my laptop which uses wireless connection provided by the same router and antenna.
View 1 Replies
View Related
Aug 30, 2012
y newly purchased 886VAW won't sync. The link ( ISDN ) I'm running it off from runs nicely on my crusty-trusty 803. I linked the box with the cables supplied against the splitter as usual but can't seem to get a stable CD light ( constantly flashing ). The box is intended to run against ADSL (with VDSL to come in a few days ).
Controller VDSL 0 is DOWN
Daemon Status: Establishing Link
XTU-R (DS) XTU-C (US)
[Code].....
View 2 Replies
View Related
Jan 16, 2013
We did a faulty ACE30 module swap in a HA pair. Both the ACEs have stopped syncing since then. Below is the error message I see:
FT Group ID: 1 My State:FSM_FT_STATE_ACTIVE Peer State:FSM_FT_STATE_STANDBY_CONFIG
Context Name: Admin Context Id: 0
Running Cfg Sync Status:Failed to convert/transform configuration to peer version
Both ACE modules are running 5.2 with the same license.sh ft peer status from both active and standby show the same results.
Peer Id : 1State : FSM_PEER_STATE_COMPATIBLEMaintenance mode : MAINT_MODE_OFFSRG Compatibility : COMPATIBLELicense Compatibility : COMPATIBLEFT Groups : 15
Am I missing something here?
View 5 Replies
View Related
Mar 6, 2012
I have begun moving NTP from our 6500 to 4 Nexus 5k as part of a core upgrade. The Nexus will act as our internal NTP server for all switches. Any switches that are on the same vlan as the Nexus have no issues syncing NTP from them. However any switch that has to have the traffic routed to the Nexus is showing that the time source as insane.
The configuration on our Nexus is as follows the Nexus are .11,12,13 and 14:
ntp peer 172.24.1.12
ntp peer 172.24.1.13
ntp peer 172.24.1.14
ntp server 192.43.244.18
clock timezone CST -6 0
clock summer-time CDT 2 Sun Mar 2:00 1 Sun Nov 2:00 60
Here is the configuration on one of our 3560's:
clock timezone CST -6
clock summer-time CDT recurring
ntp server 172.24.1.11
ntp server 172.24.1.13
ntp server 172.24.1.12
ntp server 172.24.1.14
This same configuration worked when the switches were configured as NTP Peers to our 6500 (172.24.1.1). The ip for the 6500 has been moved to an HSRP address across the Nexus so I have pointed the switches at the individual IP for each Nexus.
Here is a debug ntp packet ouput from one of the 3560s:
.Mar 7 17:21:22: NTP: xmit packet to 172.24.1.11:
.Mar 7 17:21:22: leap 3, mode 3, version 3, stratum 0, ppoll 64
.Mar 7 17:21:22: rtdel 2445 (141.678), rtdsp C804D (12501.175), refid AC180101
[Code].....
View 2 Replies
View Related
Apr 9, 2013
I have problem with syncing Nexus and NTP server. MGMT IP adress of Nexus is 10.24.130.137 and address of NTP server is 10.242.32.12, there is full routing and NTP readability between Nexus and NTP but Nexus is UN synced:
N5k-04-A# sh ntp peer-status
Total peers : 1
* - selected for sync, + - peer mode(active),
- - peer mode(passive), = - polled in client mode
remote local st poll reach delay
------------------------------------------------------------------------
=10.242.32.12 10.24.130.137 2 16 377 0.00310
Config of NTP is:
N5k-04-A# sh run ntp
!Command: show running-config ntp!Time: Wed Apr 10 14:41:35 2013
version 6.0(2)N1(2)ntp server 10.242.32.12 use- vrf management ntp source-interface mgmt0ntp logging.
I captured traffic with wire shark and see something strange in NTP Packet: "Reference ID: Un identified reference source '...'"
I have one Catalyst 2960 on same sub net and it's synchronized with same NTP without any problems. Here is snapshot of wire shark capture:
P.S. Don't bother about malformed packet, it's probably because of using ERSPAN.
View 2 Replies
View Related
Mar 15, 2011
I have small WiFi home network based on WAG120N router. Two Macs, iPad, iPhone, two iPods etc and, unfortunately, endless series of problems. Devices can't see each other - iPad can't see iPhone and vice versa. Syncing of data between devices sometimes works but most of the time it don't. And so on, and so on... I have to restart WiFi on Mac and on iPhone to sync i.e. iBank data. PhotoSync between iPad and iPhone doesn't work but once (?!) it did.
View 1 Replies
View Related
Feb 21, 2013
ACS5.2 time sync breaking once in near around one month and not able to authenticate after that .I am using domain controller (Windows Server 2008 R2) as NTP server for ACS .
What is the reason for it , is there any bug in 5.2 release or do i need to configure a thired device and point as NTP for ACS and domain controller.
View 4 Replies
View Related
Aug 11, 2012
I have a cisco 2821 router and it has an advanceip image in the flash each time on reboot it gives the message software forced crash and checksum error and finally goes into rommon. i tried xmodem and tftpdnld -r but same problem persists. I even changed the CF with a working router's flash but the same problem occurs.I also loaded an ip base image of about 13Mb size and all the same problem repeats with it.
View 10 Replies
View Related
Sep 19, 2012
I'm on a wired business network. Some of the machines are Windows 7 and some are XP Pro, but all of us are having issues connecting to web pages, especially pages with lots of pictures. If you refresh it a few times, it may pop up. Some don't ever come up, like weather.com. The server has the same issue, even if you connect it directly to the router.
View 10 Replies
View Related
Nov 18, 2011
I am working on setting up a Linksys router for my Dad. I am moderately competent with networking. Anyway, a glaring, and obnoxious problem I am having is everytime I load a page for the router(192.168.1.1), it does not completely load and I have to hit refresh.Now when I try to change the router settings from DHCP to PPPoE, it reloads the page, for whatever reason, and because this router wants to be irritating, it only half loads the page, so I cannot click the "save settings" button.This is what has been done to the router after being reset(red button on the back held in for 10 sec):I turned on the modem, and plugged directly in to make sure I had internet connection.I plugged the modem's ethernet into the "Internet" port on the wireless router.And finally, I plug an ethernet cable from my computer to the 1st port on the wireless router.Nothing else has been changed. I have not turned on any ridiculous settings. This half-loading router pages is driving me up the wall though. I cannot even troubleshoot the wireless connectivity because I cannot make any changes.
View 7 Replies
View Related
Mar 27, 2013
Region : Malaysia
Model : TL-MR3040
Hardware Version : V1
Firmware Version : TL-MR3040_V1_120822
ISP : Celcom
There is a website that does not load when the router is in a certain setting. The website I tried to access was url...I have tried the different firmwares and settings and have narrowed it down to the AES encryption.Have tried the original 120328 firmware, works perfectly with all different settings.With the 120822 firmware, it works with all settings EXCEPT when AES is chosen as the encryption method, be it using WPA or WPA2 Personal.
I therefore pinpoint the AES encryption mode in the 120822 firmware to have a bug. I need to use 802.1n with AES, rather than TKIP.Can someone else using 120822, with AES encryption for wireless, verify that this is happening for them too?
View 2 Replies
View Related
May 7, 2013
i have one cisco router 2811 now its not booting normally.
Router was working without any problems but due to power loss router restarted and goes into rommon mode
I tried to boot from flash and usbfalsh with different images but no use router is in still rommon mode.
here the output of my router:
program load complete, entry point: 0x8000f000, size: 0x3117470
Error : compressed image checksum is incorrect 0x8E095E7F
Expected a checksum of 0x8E0AE77F
*** System received a Software forced crash ***
signal= 0x17, code= 0x5, context= 0x80014e20
[Code].....
View 7 Replies
View Related
