I have bought a refurbished HP netbook and I tried connecting it to the internet. When I click on the internet explorer button everything looks fine. It loads perfectly as the icon comes up in the corner of the tab as if it has loaded but the screen just stays white and blank.
View 1 RepliesI go into my login page and all I see is blank. Just a white screeb. I have put in my IP address, I have no idea what I should do. I have been trying to fnd my password but the page has no login.
View 3 Replies View RelatedI have a Compag Netbook (running Windows XP Home Edition) which will not connect to the internet, however the wireless icon in the tray is telling me that the signal strength is good and that i am connected but i cannot access any webpage. I know it is probably not the modem as we have another netbook in the house which connects no problem, as does our laptop so i'm figuring its something to do with the Compaq netbook??
I've had a look at some of the other queries regarding this on the site and note that you recommend 'ipconfig /all' results so you can gain a better understanding of what the problem might be, so here it is below
Windows IP Configuration
Host Name: Compaq-38184c6a
Primary DNS Suffix:
Node Type: Unknown
[Code]....
I recently installed LMS 4.1 on a freshly installed W2k8R2 server, and untill last week I had no problems logging on. For some reason, I'm now getting a blank page after entering my credentials. The URL is like [URL] I already rebooted the system, but that made no difference. All Cisco Works services seem to be started, as is Apache/2.2.17.
View 1 Replies View RelatedI'm setting up A DAP-1522 in bridge mode. Network setup went fine. When I went to wireless setup I got a blank page, all white no letters, nothing. I've logged out and back in again with the same results.
View 8 Replies View RelatedI tried to log on to my wireless routers IP address but it only gives me a blank page after signing in. the IP address is 192.168.1.1. Is there a problem with this ip address?
View 1 Replies View RelatedWhen a friend sends me an email with a link to click on when I click on ther link a blank page pops up with the words "404 not found". Why does this happen and is it a big problem. This problem just started to happen a few weeks ago. I never had a problem whenever a friend sent me an email with a link to click on.
View 6 Replies View RelatedI have a ticket active with Cisco TACS Support but after 3 days and a complete uninstall and reinstall I am getting nowhere. I cannot let TACS into the server and I cannot post unsanitized logs for security reasons.I installed LMS 4.0 with the Win2K8 patch on Win2K8R2 64 bit server. No problems during a 2nd install (first one was completely removed per TACS). Checked all Windows event logs and windows firewall log. AV disabled. No other roles installed accept IIS (disabled) and DHCP (active). Ports are default HTTP: 1741 and SSL: 443.load site from server (IE 8) or workstation (IE 7) cookies enabled, and login with "admin" and the proper password and each browser quickly loads a blank page with this URL:
[URL]
Apache error.log shows several interesting entries (*note IP and serer names are obfuscated for security)...these show up yesterday soon after install at the top of the log:
[Wed Mar 07 16:04:25 2012] [warn] RSA server certificate CommonName (CN) `<server_name_obfuscated>' does NOT match server name!?
[Wed Mar 07 16:13:04 2012] [error] [client IP_obfuscated] client denied by server configuration: C:/Program Files (x86)/CSCOpx/htdocs/favicon.ico
[Wed Mar 07 16:13:04 2012] [error] [client IP_obfuscated] client denied by server configuration: C:/Program Files (x86)/CSCOpx/cgi-bin/error/403.pl
Then these show up for the majority of the rest of the log between yesterday Mar 07 and today Mar 08
[Thu Mar 08 08:50:46 2012] [notice]
WARNING: Session Validation returns false
[Thu Mar 08 08:50:46 2012] [notice]
session is invalid for this URL.:
[code]....
When my X3000 Cisco who works fine when my pc which is connected via the cable port in the adsl modem. (Light is blue)But when the pc is switched off, the light becomes white and no internet connection on our wifi connected devices although we manage to have the connection on the wifi network.
View 9 Replies View RelatedHave noticed this in almost a regular pattern. About every 3 seconds the internet light whick is blue most of the time will ocassionally flash white then maybe yellow. Does not appear to interupt internet access yet last only a second (at the longest),so don't know if I would notice. Am connected to DSL modem and see no change it its indicator lights,(traffic, collision, lan), when it occurs on the DIR-655. Have three PC's and a network (LAN) printer as well as wireless enabled. BTW is does not matter if wireless is active. What do the different colors mean ?? Blue = Connected White = Yellow =
View 3 Replies View RelatedI have a medical office and am trying to connect my netbook to the office networkThe netbook can connect to the internet via wireless. I want the netbook to connect to the network drive that has my office data and program. How can I get the netbook to see the network drive on the server
View 2 Replies View RelatedHere is my current setup.I have a desktop CPU (without monitor) and a Acer D270 netbook.Desktop CPU has XP (SP3) and Netbook has XP SP3 and Win 7 (Dual boot).I wish to setup a LAN so I can access and view my desktop PC which is more powerful than my netbook. How do I setup the LAN connection or use remote desktop? I have a lengthy crossover cable ready (2 sided RJ45 cable). A detailed description so I can follow the procedure to setup at my place. Regarding performance, how good will it be. The CPU has NVidia Graphics card.
My Pc Specs:
Core 2 Duo E7500 2.93 GHz Processor, Gigabyte GA-G31M-ES2C Motherboard, 2 GB DDR 3 RAM, 500 GB Seagate Barracuda HDD 7200 RPM, MSI N210 NVidia 1 GB GDDR3 Card.Acer Aspire D270 Netbook
I have a problem, my netbook eMD355 is not connecting directly to our wifi. I tried to restore the system but still it doesn't connect. My windows here is WINDOWS 7 ultimate.
View 1 Replies View RelatedI have been trying to connect my laptop (Windows Vista) and my netbook (Windows 7) with a crossover cable, and I have followed every single step of the instructions I have found on the net, including disabling Windows firewall, but it won't do it and when I try to ping the failure seems to be when the netbook tries to ping the laptop (100% loss).
View 6 Replies View RelatedI recenlty bought an E2500 router. I was able to connect 4 of our laptops at home just fine. But when I tried to connect my Acer One netbook, the "Cisco Connect" loaded up to 25% & then I couldn't connect to the internet. I've contacted Tech Support & they suggested downloading the latest wireless adapter driver. I contacted Acer & they said it sounded like a security issue on my netbook. I was out of warranty so they'd have to charge $150 for tech support.
View 2 Replies View Relatedi want to find out my router ip address, but when i go to cmd & run ipconfig my default gateway shows blank. i want the router ip in order to access my CCTV footage through the internet. my router/modem is BSNL Broadband model no DNA-A211-I. i can however connect to the internet without any problems. just want to find out my router ip address.
View 11 Replies View RelatedI bought 2 Sylvania netbooks for my kids. I was able to go wireless on my son's netbook since I found a small icon on the task manager, where I clicked and just followed the instructions. However, I can't find that icon on my daughters netbook, I've tried the control panel for internet connections but the "wireless" option is not there...
View 2 Replies View RelatedSo my fiance picked up a netbook and we can't get it to connect to my wireless network. It is an XP computer with Service Pack 3. It sees the wireless network, which other devices can connect to with no problem but when I try to connect it I get a limited or no connectivity error. I get the same thing when I try to plug the computer directly into the router. Occasionally it will just connect to the wireless, but it still won't connect to the router, let alone the the internet. Currently it is not connected to anything.
Windows IP Configuration
Host Name . . . . . . . . . . . . : your-17e2f2b317
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
I have satellite internet and i can't get my netbook to connect every time I pug my cable into the back of my netbook it will say that I connected but it won't let me open any pages.
View 1 Replies View RelatedI bought a 7" netbook with Windows CE Version 6.00 (build 3122). I can't figure out how to connect to the internet. The instruction manual says to click on the wireless icon, which brings up a window that, in the picture in the manual has three tabs, the third being "wireless information", but on my netbook that window only has two tabs. The "wireless information" tab isn't there and that's what I'm supposed to go to to connect to the internet. What do I do?
View 1 Replies View RelatedI have a lenovo netbook that used to connect to the internet seamlessly wherever I went. Now it doesn't even see any other networks in range. I tried to repair the wireless network connection - it could not complete because it could not connect to the netork. Wireless Zero Configuration service is started. I restarted the service - no difference.
View 1 Replies View RelatedI want to create an ad hoc network on my lap and when other users connect to my ad hoc network and open your browser for the first time ... I take a personal website, not to have set in your browser ..
View 1 Replies View RelatedI have purchased the above for my daughter but I am unable to connect to the internet have tried our t-mobile dongle and also main connection from virginnet broadband, neither seem to work this netbook runs on windows ?
View 2 Replies View RelatedComputer has windows 7 installed Windows Update.Now we can't connect to the internet.We get an error saying the computer cannot find the proxy server.We don't have a proxy server.We've never had a proxy.The settings are not set to look for a proxy server.But we still can't connect.The computer will connect to the wireless network, but we get no internet connection.
View 4 Replies View RelatedI have a netbook (ASPIRE ONE) with windows XP SP3. When I am at the office the internet connection fails frequently. The internet connection icon disappears after few seconds. But the rest of the computers that are in the office work OK with the internet. But at home, my computer work well, even the internet icon appears and remains. At office, there is a belkin300N router. At home, I have the same model but old version.there are computers with Windows Vista or Windows XP either at office or at home.
View 2 Replies View RelatedI am having a similar problem to a couple others with the dir-651.Frequent Disconnects difficulty even connecting to routers home page.Internet worked ok on dir-615 i had before, just slow gaming speeds occasionally running vista 64 Timewarner cable.And i do have the newest firmware.
View 3 Replies View RelatedWe have enabled web Auth for our public access on Cisco WLC 2504. It works fine. However, if a wireless user opens his email with download pictures website, he can’t get the picture download until he accept the web policy. Our users complaint about that.
"Our application makes requests to the internet to check for and download pictures, etc. The problem is that web requests are not permitted until a user has opened his/her web browser and attempted to go somewhere (e.g. google) so that your security system can redirect them to the authorization form where they must click the “accept” button. If the user has not done this yet, any functionality in our app that requires an internet connection won’t work because the security system is blocking the requests. Unfortunately, since they’re not in a web browser at the time, it doesn’t redirect them to the authorization page - the request simply fails since a redirect doesn’t have an effect on the application like it would a web browser. My remedy would be, if possible, to whitelist web requests to the server(s) where our code and/or images will live and let them get around that restriction. Otherwise, users won’t understand why the app isn’t working unless they try and open a web browser first – which is probably not something I’d expect them to do. With this solution, you could still ensure that nobody is accessing the internet at large without accepting your terms – but they could access your website as well as our application’s functionality seamlessly."
Can we setup whitelist or something like that on WLC?
it would be possible to configure a White list on the SRP500 URL filter. In other words the customer wants to specify allowed URL's and all other URL's must be blocked.
View 1 Replies View RelatedI haven't done anything on the computer yet (got to have internet to do that.). The home internet is in the wireless connections icon at the bottom right of the screen, but when I try to connect, it says it's unable to. Would installing 4 gb of ram have a problem?
View 3 Replies View Relatedi just got a aspire one d257 netbook and i cant connect wirelessly to the internet its not giving me any option to do it and its saying that the wireless connection is not enabled how do i enable it
View 1 Replies View RelatedCannot find my wireless internet connection on my Netbook using Windows XP
View 2 Replies View RelatedI have an annoying problem with my netbook. It's a Toshiba NB525. My laptop can access the internet and connect wirelessly at home.
I'm currently staying at a hotel. I can detect and connect to the network but no internet.
The way the internet at this hotel works is that it redirects you to a site to log in before gaining access.
It seems to work intermittently but very rarely. Requiring me to reset the connection multiple times. Problem is, my other devices work perfectly fine to connect.
I have problem with this 2 AP model 3500i out of 140 APs. below is my finding:-
1. Suspected AP froze with bright white light and dissociated from controller
2. After bounce back (shut / no shut) the port, its working as normal
3. In a while, its repeat to (1.)
4. Direct console to the AP, no output is seen.
From NCS & controller log, its only show as below:
AP 'TTR13-A03AP0076' disassociated from Controller '10.209.116.16'
AP 'TTR4-A02AP0014' disassociated from Controller '10.209.116.15'