Cisco Routers :: SRP500 URL Filter White List?
Nov 16, 2011it would be possible to configure a White list on the SRP500 URL filter. In other words the customer wants to specify allowed URL's and all other URL's must be blocked.
View 1 Replies
ADVERTISEMENT
Cisco Routers :: RV220W Filter Mac Address List
Feb 5, 2013We have a wifi router RV220W and we need to filter the mac address. The problem is that the number of the "allowed" devices is around 50 (not all connected at the same time), but the maximum number of mac address which can be listed in this router for each VLAN is 20, so for the moment we set 3 VLAN, each one with a different mac adderss list. This is very awkward because the area to be covered by the wifi network is large and we need repeaters, but having 3 VLAN we should put 3 repeaters for each point. Is there any way to configure this router in order to have a single VLAN but with a mac address filter list of 3 x 20 mac address?
View 1 Replies View RelatedCisco Wireless :: Can Setup White-list On WLC 2504
Jul 12, 2012We have enabled web Auth for our public access on Cisco WLC 2504. It works fine. However, if a wireless user opens his email with download pictures website, he can’t get the picture download until he accept the web policy. Our users complaint about that.
"Our application makes requests to the internet to check for and download pictures, etc. The problem is that web requests are not permitted until a user has opened his/her web browser and attempted to go somewhere (e.g. google) so that your security system can redirect them to the authorization form where they must click the “accept” button. If the user has not done this yet, any functionality in our app that requires an internet connection won’t work because the security system is blocking the requests. Unfortunately, since they’re not in a web browser at the time, it doesn’t redirect them to the authorization page - the request simply fails since a redirect doesn’t have an effect on the application like it would a web browser. My remedy would be, if possible, to whitelist web requests to the server(s) where our code and/or images will live and let them get around that restriction. Otherwise, users won’t understand why the app isn’t working unless they try and open a web browser first – which is probably not something I’d expect them to do. With this solution, you could still ensure that nobody is accessing the internet at large without accepting your terms – but they could access your website as well as our application’s functionality seamlessly."
Can we setup whitelist or something like that on WLC?
Cisco Routers :: Can SRP500 Be Used In DM VPN
Oct 8, 2012I would like to use a SRP500 series router in a DM VPN solution. Or perhaps there is another scalable VPN solution I could use?
View 3 Replies View RelatedCisco Routers :: What About Ipv6 On Srp500 Series
Jun 4, 2012Tomorrow 2012-06-06 is ipv6 launch day, what about ipv6 on srp500 series ? On product specification cisco wrote : IPv6 (RFC 6204) ready.
View 10 Replies View RelatedCisco Routers :: SRP500 Compatible With Huawei E398 USB LTE Modem
Jul 15, 2011is the SRP541W compatible with the Huawei E398 USB LTE Modem? If not, will it be compatible in the near future?
View 4 Replies View RelatedCisco WAN :: 2811 - Filter MAC List On Router With VPN Remote Access
Sep 3, 2012I have a router 2811 that it's configured with VPN remote access and I'm trying to block clients based on their MAC address, I tried configuring access interface as routing/bridging, configured an ACL 750 for 48-bit MAC address access list and enable "bridge-group 1 input-address-list 750" command on bridged interface, but the only match I got when VPN clients access the LAN is from router interface.
Internet(VPN) ---> Router1 (FE 0/1) ---> Router1 (FE 0/0) --> Router2 (FE 0/0) --> Router2 (FE 0/1) --> LAN
I tried configuring on Router1 (FE 0/0) interface and also on Router2 (FE 0/0) interface with same behaviour. Router2 is used for internal NAT.
bridge irb
bridge 1 protocol ieee
bridge 1 route ip
[Code].....
Cisco Routers :: SRP500 Series And RFC1483 Routed LCC Encapsulation Type?
Apr 14, 2012I've buy a SRP500 Series Router (ADSL 2+).My ISP need RFC1483 Routed with LCC encapsulation type but this router dont have this type of encapsulation available in WAN settings. What can i do to use this device with my ISP adsl connection ?
View 4 Replies View RelatedCisco Routers :: SRP500 Series - Answer Incoming Calls On Any FXS Port
Jul 1, 2012I'm using a SRP521W-U. I've set up a SIP account on Line 1. I would like to be able to answer incoming calls on both FXS1 and FXS2. How do I achieve that both ports will ring?
View 2 Replies View RelatedCisco Switching/Routing :: 3750 Populate All Switch Port With 100 Filter List
Oct 27, 2011If i fully populate all switch port (Cisco 3750 series) with 100 filter list on each port is it recommendable.
View 4 Replies View RelatedLinksys Wireless Router :: E4200 Multiple Unknown MAC's In Filter List?
Jan 27, 2012I have a few desktops in my home network with a new E4200 router. Have to add my wifes Lenovo notebook to the net and activated MAC filtering as addition to the WPA2.Set her MAC address in the filter list. Only one MAC is allowed to access WLAN.An hour later I see in the Filter list four (4) different and unknown MAC adresses added to the list.
View 8 Replies View RelatedLinksys Wireless Router :: Changes In MAC Address Filter List Are Applied Only After Reboot Of E4200
Nov 26, 2011I have noticed that changes in MAC address filter list are applied only after reboot of router. It is inconvenient.
Router Linksys E4200
Firmware Version: 1.0.03
Operation system on client computer is Windows 7.Can it be resolved in the next version of firmware?
Cisco Routers :: How Does Quality And Longevity Of SRP500 Series Compare To RV Series
May 27, 2012My Draytek 2710 just dies after 2 years so I was looking for something a little more reliable and noticed the spec of the SRP527W-U.I take it with only one antenna and reading a couple of past discussions, the wireless will only manage n-lite as some people call it i.e. 150Mbps, and not the full 300? Oh, and are the ports still only 100M and not Gig?I know the 547 would tick both these boxes but we are talking twice the price. How does the quality and logevity of the SRP500 series compare to the RV series (which would need an adsl modem) or the Linksys boxes?
View 1 Replies View RelatedCisco Routers :: RV042 V3 Web Filter Feature?
Jan 10, 2012We are currently installing RV-042 V3 Dual WAN VPN Routers for a Customer with an HQ Office & 3 Branch Offices. The Customer recently requested to use the WEB Filter feature available in the RV-042 V3 Router to do the followng : - " Block all the HTTP Traffic Except for the company Website " We tried all the Combinations between " Access Rules " & " Content Filtering " available under the " Firewall " but we always reach the result that either to Allow ALL HTTP Tarffic to All Websites or to Block ALL HTTP Traffic.
how to Block all HTTP Traffic except for certain URL ( Using the URL Name NOT the IP Address ).
Cisco Routers :: RV082 Bypass Filter For One User?
Aug 1, 2011I have been asked by a client to restrict access to a number of non work related sites. Easy, blocked them using Firewall> Content Filter. Then I was asked to disable this filter for one user (the Managing Director) so he can access eBay.
I am familiar with doing this on a Netgear device, but so far my efforts with the RV082 have failed.
First I have tried using DHCP to reserve an IP address for this user, then setting 'Access Rules' so that this IP has all access all the time, but this does not appear to work.
I assume setting this IP as the DMZ would achieve what I want but it seems like overkill and not very security wise.
Routers / Switches :: How To Change IP Filter Settings
Jul 5, 2011For some port fowarding reasons I have to change my router setting to these:Maximum Ports: 4096TCP Timeout (in seconds): 600UCP Timeout (in seconds): 120I am using a Realtek router ( Family PCI-E Gigabit Ethernet <NDIS 6.20>)This is supposed to be EXTREMELY easy but I lack any general computer knowledge whatsoever. In laymen's term, I am N00B.
View 1 Replies View RelatedCisco Routers :: Why Didn't Content Filter Still Work In RV042
Jul 25, 2012I want to make a question about RV042. I used RV042 router in my office. I used content filter feature in router.Althought this have not been apply the rules. I think I made wrong rules.I enabled the block enable forbbiden domain .And then added the websites that I want block.However, these websites are still browsing in local computer.
View 4 Replies View RelatedBelkin Routers :: N750 F1103 Mac Filter Limitation
Dec 15, 2012Why does My N750 F1103 (f/w 1.10.16) MAS filter only allow 20, my old Belkin router allowed far more
View 3 Replies View RelatedLinksys Cable / DSL :: Cisco X3000 No Internet When White Light Is On
Nov 23, 2012When my X3000 Cisco who works fine when my pc which is connected via the cable port in the adsl modem. (Light is blue)But when the pc is switched off, the light becomes white and no internet connection on our wifi connected devices although we manage to have the connection on the wifi network.
View 9 Replies View RelatedCisco Wireless :: AP 3500 Freeze Bright White Light?
Jul 12, 2012I have problem with this 2 AP model 3500i out of 140 APs. below is my finding:-
1. Suspected AP froze with bright white light and dissociated from controller
2. After bounce back (shut / no shut) the port, its working as normal
3. In a while, its repeat to (1.)
4. Direct console to the AP, no output is seen.
From NCS & controller log, its only show as below:
AP 'TTR13-A03AP0076' disassociated from Controller '10.209.116.16'
AP 'TTR4-A02AP0014' disassociated from Controller '10.209.116.15'
Linksys Login Page - Only Shows A White Screen
Jun 6, 2012I go into my login page and all I see is blank. Just a white screeb. I have put in my IP address, I have no idea what I should do. I have been trying to fnd my password but the page has no login.
View 3 Replies View RelatedHP Netbook Is Connecting To Internet But Page Is White And Blank?
Jun 18, 2012I have bought a refurbished HP netbook and I tried connecting it to the internet. When I click on the internet explorer button everything looks fine. It loads perfectly as the icon comes up in the corner of the tab as if it has loaded but the screen just stays white and blank.
View 1 Replies View RelatedD-Link DIR-655 :: Internet Light Flashes White Or / And Yellow Intermittently
Apr 11, 2011Have noticed this in almost a regular pattern. About every 3 seconds the internet light whick is blue most of the time will ocassionally flash white then maybe yellow. Does not appear to interupt internet access yet last only a second (at the longest),so don't know if I would notice. Am connected to DSL modem and see no change it its indicator lights,(traffic, collision, lan), when it occurs on the DIR-655. Have three PC's and a network (LAN) printer as well as wireless enabled. BTW is does not matter if wireless is active. What do the different colors mean ?? Blue = Connected White = Yellow =
View 3 Replies View RelatedCisco Routers :: RV042G - ProtectLink Enabled To Filter Out Various Categories From Network Traffic
Jun 29, 2012I have upgraded to the new RV042G to take advantage of the gigabit Ethernet speeds and to prepare for when our ISP upgrades our bandwidth. I currently use the RV042 with Protect Link enabled to filter out various categories from our network traffic. I noticed that this feature is not included with the RV042G.
Is this something Cisco will decide to add back in later? In the meantime, how to block content on the network? The basic URL and keyword filter will not meet our needs, since it is much easier to let a service such as Trend Micro manage what is blocked in the categories they offer.
Cisco Routers :: Rv042g Cannot Add To List On One To One Nat
Apr 22, 2013Have a rv042g, newest firmware, trying to setup one to one nat on the configs page, I select enable, enter private ip , enter public ip, enter the range, and click "add to list" and nothing.... no error message, doesn't add to the list below it
View 1 Replies View RelatedRouters / Switches :: ACL List Not Working As Expected?
Mar 29, 2011access-list <#> permit/deny <protocol> <sourceAddress> <sourceMask> <destinationAdd> <destinationMask>Say I applied an ACL inbound on Fa0/0, would the source address be the outside the LAN?So if took the same ACL and applied it as outbound, would the source need to be change to an IP inside the LAN?I am a bit confused by the data flow I'm seeing in packet tracer simulation mode to. I set up an ACL for testing purposes "access-list 199 permit ip 193.20.30.0 0.0.0.63 any" set as inbound, the idea being it permits any traffic from the .0 subnet.When I watch the packet in the simulation, it makes it to the destination address then is dropped by the router on it's way back out to the sender.
View 4 Replies View RelatedRouters / Switches :: BGP Prefix List Is Not Updated?
Nov 22, 2012BGP prefix list is not updated when other party having new downstream with different AS number.BGP filter has disabled but the prefix list is still not updated.BGP soft reset is performed, but the prefix list is still not updated.BGP prefix list is only updated when the other party having new prefix with the same AS number.Can explain why?
View 1 Replies View RelatedCisco Routers :: RVL200 - Using Static IP List To Block Devices
Nov 29, 2011which current SB routers support these features known from RVL200 and RV0XX v. 1.X?:
Block MAC address on the list with wrong IP address
Block MAC address not on the list
Belkin Routers :: Way To Block A Specific List Of Sites With N750 DB Wireless
Dec 17, 2012I have a Belkin N750 router which I purchased because the box said it had filtering options. I didn't realize that the filtering was only sites that Norton kept track of. There are certain adware sites I know about that I would like to filter. Possible with this router?
View 5 Replies View RelatedBelkin Routers :: F5D8236-4 V2 - DHCP Client List Is Not Showing All IP Addresses In Use
Feb 23, 2013I have a Wireless N router model F5D8236-4 v2 (01) with firmware 2.00.04 (Nov 12 2008 10:51:08) and it's not showing all issued wireless or Wired IP addresses in DHCP Client List.
They all have IP addresses and connect to the internet through the router, but in the router administration page, they're not listing. The Windows devices all show but most of the Mac devices are not, nor is my XBox 360.
My reason for investigating this is because the router seems to keep losing the Mac devices and a router reboot fixes it, but it shouldn't have this problem because all the Windows devices just seem to work.
According to the support page I have the latest available (dated November 12, 2008 which really seems kinda old to me for a Wireless N router). Are there any plans for a new firmware offering for this modem or have you already deprecated it as "legacy equipment"?
Cisco Switching/Routing :: 65535-BGP Distribute List Blocking Routers / Configuration Does Not Work?
Jan 17, 2013Why the below configuration does not work? BGP exchanges routes without a problem all the time the distribute list is removed from the config. When I apply the distribute list it blocks all routes, not just those intended in the prefix list.
[CODE]....
Cisco :: ACS 5.2 - How To Filter By IP Address
Jan 31, 2013Using ACS 5.2, under Network Resources>Network Devices and AAA Clients>, I can only filter by:
Name
NDG:Location
NDG:Device Type
Description
How can I find a device by its IP Address? or how can I enable this option?
On this link:[URL] I read the following: ''Network Device Filters—Based on the AAA client that processes the request. A network device can be identified by its IP address, by the device name that is defined in the network device repository, or by the NDG'.....
How could I do this on my ACS server?
Setup Hw-550-3g Mac Filter?
Jan 12, 2011I have hw-550-3G modem and I like to know how to setup Mac, IP filter.To allow only the Mac, address in the list using the internet.
View 3 Replies View Related