Cisco Wireless :: AP 3500 Freeze Bright White Light?

Jul 12, 2012

I have problem with this 2 AP model 3500i out of 140 APs. below is my finding:-
 
1. Suspected AP froze with bright white light and dissociated from controller

2. After bounce back (shut / no shut) the port, its working as normal

3. In a while, its repeat to (1.)

4. Direct console to the AP, no output is seen.
 
From NCS & controller log, its only show as below:
 
AP 'TTR13-A03AP0076' disassociated from Controller '10.209.116.16'

AP 'TTR4-A02AP0014' disassociated from Controller '10.209.116.15'

View 5 Replies


ADVERTISEMENT

Linksys Cable / DSL :: Cisco X3000 No Internet When White Light Is On

Nov 23, 2012

When my X3000 Cisco who works fine when my pc which is connected via the cable port in the adsl modem. (Light is blue)But when the pc is switched off, the light becomes white and no internet connection on our wifi connected devices although we manage to have the connection on the wifi network.

View 9 Replies View Related

D-Link DIR-655 :: Internet Light Flashes White Or / And Yellow Intermittently

Apr 11, 2011

Have noticed this in almost a regular pattern. About every 3 seconds the internet light whick is blue most of the time will ocassionally flash white then maybe yellow. Does not appear to interupt internet access yet last only a second (at the longest),so don't know if I would notice. Am connected to DSL modem and see no change it its indicator lights,(traffic, collision, lan), when it occurs on the DIR-655. Have three PC's and a network (LAN)  printer as well as wireless enabled. BTW is does not matter if wireless is active. What do the different colors mean ??   Blue = Connected  White =   Yellow =   

View 3 Replies View Related

When Cord Is Not Attached Screen Is Bright But Dims When Plugged In

Feb 9, 2012

when i unplug the computer it nice and bright but when i plug it back in it goes dim

View 1 Replies View Related

Cisco Wireless :: Can Setup White-list On WLC 2504

Jul 12, 2012

We have enabled web Auth for our public access on Cisco WLC 2504. It works fine. However, if a wireless user opens his email with download pictures website, he can’t get the picture download until he accept the web policy. Our users complaint about that.
 
"Our application makes requests to the internet to check for and download pictures, etc.  The problem is that web requests are not permitted until a user has opened his/her web browser and attempted to go somewhere (e.g. google) so that your security system can redirect them to the authorization form where they must click the “accept” button. If the user has not done this yet, any functionality in our app that requires an internet connection won’t work because the security system is blocking the requests.  Unfortunately, since they’re not in a web browser at the time, it doesn’t redirect them to the authorization page - the request simply fails since a redirect doesn’t have an effect on the application like it would a web browser. My remedy would be, if possible, to whitelist web requests to the server(s) where our code and/or images will live and let them get around that restriction.  Otherwise, users won’t understand why the app isn’t working unless they try and open a web browser first – which is probably not something I’d expect them to do.  With this solution, you could still ensure that nobody is accessing the internet at large without accepting your terms – but they could access your website as well as our application’s functionality  seamlessly."
 
Can we setup whitelist or something like that on WLC?

View 9 Replies View Related

Linksys Wireless Router :: Internet Light On E3000 Doesn't Light Up?

Jul 22, 2011

 I previously asked if I should be concerned that the Internet light on my Linksys E3000 router doesn't light up when I have Internet access. Well recently I had to do a reset and I noticed that during the reset it does in fact light up, but it doesn't come on when the router is done with the reset!

View 1 Replies View Related

Cisco Routers :: SRP500 URL Filter White List?

Nov 16, 2011

it would be possible to configure a White list on the SRP500 URL filter. In other words the customer wants to specify allowed URL's and all other URL's must be blocked.

View 1 Replies View Related

Linksys Wireless Adapters :: WUSB600N Vs 1 Causes Mouse To Stutter / Freeze

Jun 29, 2012

Computer was hooked to router by cat 5.  System worked fine. Due to network configuration changes I had to switch to wireless. Now the Mouse is jittery, delayes in movement and freezes.   
 
OS:   Windows 7 Ultimate 64
Ram:  16Gb
Mouse:  Razer Naga Epic
Adaptor:  WUSB600N Vs 1
MB:  ASROCK Extreme 7
Processor:  Intel 2600K
Video:  ASUS ENGTX 580

View 5 Replies View Related

TP-Link 300Mbps Wireless :: WR1043 Suddenly Began To Freeze?

Feb 22, 2013

Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Charter 20Mb

I've had the router for 3+ months, and was very happy until about a week ago. Since then, it's started doing what many others here have reported: freezing where it's impossible even to access the web interface, requiring a reboot. When this happens, router's SYS and WLAN lights both freeze (either on or off, seems to be random wherever they are at the instant). The other lights continue to flicker. Freezes occur anywhere from half an hour to several hours apart.Network includes three ethernet wired devices (1 computer, 2 Ooma VOIP adapters), 1 TB NTFS hard drive via USB (music storage), 4 wi-fi devices (1 computer, 1 network streamer, 1 printer, 1 Roku streamer).Use the router extensively to stream music from the USB-connected hard drive, but the freezes also happen when not streaming.Have already done a factory reset of the router. Currently running plain vanilla installation except for enabling security settings and the USB drive, and it's still happening.

View 3 Replies View Related

Linksys Login Page - Only Shows A White Screen

Jun 6, 2012

I go into my login page and all I see is blank. Just a white screeb. I have put in my IP address, I have no idea what I should do. I have been trying to fnd my password but the page has no login.

View 3 Replies View Related

HP Netbook Is Connecting To Internet But Page Is White And Blank?

Jun 18, 2012

I have bought a refurbished HP netbook and I tried connecting it to the internet. When I click on the internet explorer button everything looks fine. It loads perfectly as the icon comes up in the corner of the tab as if it has loaded but the screen just stays white and blank.

View 1 Replies View Related

Linksys Wireless Router :: WRT54G / Switch From G To N Causing System To Freeze Up?

Feb 4, 2012

I work from home on a Lenovo Laptop.  I connect to my work network, and ultimately to a midrange ISeries.  For the past year I've had no major problems with my Netgear Linksys WRT54G.  I switched to a Netgear N300 last weekend because my husband's desktop was having a lot of issues.  His connection is much better now.I'm able to connect to the internet with no problem, and I can access my company network & email pretty well.  But, when I log on the ISeries it slows to way less than a crawl.  According to my netwok icon, the connection is anywhere from 104 to 130 MBPS at any given time.  But it freezes up so badly that it takes about 20 - 30 seconds just to type each letter, or to go from one window to another, or just to move the cursor down one line.  It's infuriating.  Every once in awhile if I disconnect and reconnect it works almost normally for awhile, but eventually slows down almost to a stop again.  I actually worked for about 90 minutes the other day with no problem before it started acting up again.  When I put the old G router back it works fine again.   My laptop has an Intel(R) Centrino(R) Advanced-N 620 wireless adaptor.  As long as I don't connect to the iseries, I have good speed and no issues with the internet or work intranet. 

View 1 Replies View Related

TP-Link ADSL2+ Wireless :: TD-W8968 Has Begun To Freeze Up / Web Interface Being Unavailable

Nov 29, 2012

Region : Sweden
Model : TD-W8968
Hardware Version : V1
Firmware Version : 0.6.0_1.1_up(120926)
ISP : HessleholmNetwork

My TD-W8968 has begun to freeze up. It had been running for about two hours before this happened. It's a "slow" process that starts with the web interface being unavailable, i'm unable to connect to the modems web interface.And at about the same time it becomes impossible to connect new devices to the wireless network. Right about this point i did a speed test over the modem and performance was abysmal.It was so slow that my web browser believed that it was offline! But i was able to re run the internet speed test once more before it totaly locked up! At this point it was impossible to use the TD-W8968.

This was the,, i don't know,, perhaps the fifth time it happened in a row. It has been running perfect for two months before it began acting up like this.I have done a reset of the modem, didn't solve the problem.I have also done a reflash of the firmware, i've had the latest firmware since i bought the TD-W8968. But the reflash didn't solve it

View 14 Replies View Related

Cisco WAN :: Light Up Every Port Light On 3750g?

Mar 2, 2011

I am trying to light up every port light on a 3750g.  There is not anything plugged into them and I would like to know (just for fun) is there a way to make every port light 1 - 48 turn on using a command?

View 3 Replies View Related

LAN Games Always Freeze?

Jul 24, 2011

All right, I have two desktop computers, one's connected to the Internet through wireless and the other one's directly connected to the router via Ethernet.Whenever I try to play a LAN game between the computers with several 3D shooters, during the game there's several 3-second freezes, and then eventually the game freezescompletely.These freeze-ups are getting very frustrating.

View 1 Replies View Related

Cisco Routers :: WRVS4400N Lock Up / Freeze?

May 3, 2013

In the last couple weeks my router has begun to lock up / freeze.  Not sure the appropriate terminology to use for this.  The end result is wireless and wired connections stop functioning.  I can't connect to the routers web interface via wired.  I can't connect to any of the wireless SIDs.  The router just doesn't respond.  When I look at the router the lights are still blinking, but nobody seems to be home.  I have to unplug the router and do a 30 count and plug it back in to get it to return to working order.At the time that this first occurred I mad not made any changes to the device in months, if not longer.  Was running great.  Not sure what happened.

View 7 Replies View Related

Cisco AAA/Identity/Nac :: Manager V4.6.1 Freeze During Boot

Apr 28, 2013

I have a cisco NAC Manager v4.6.1 when i restart it, the boot freeze at this msg <ext3 fs mounted filesystem with ordered data mode> and it take a very long time.
 
The server is pingable but no GUI access during the msg.

View 1 Replies View Related

Cisco Wireless :: Getting 3500 AP To Talk To WLC 2100

Jul 18, 2012

I am trying to config my wireless lan controller (WLC) 2106 to discover my new 3500 access points.I followed the example Cisco configuration doc.69719.I am using a Cisco 3760 switch to interconnect the AP and WLC.I set up DHCP in the switch. [code]

View 6 Replies View Related

Cisco Wireless :: Cannot Access Internet With 3500 AP

Jul 1, 2012

The problem am having is that my Users can get to the internet on the LAN but cannot get to the internet thro the WLAN. Below is the cisco equipment used to setup the WLAN and LAN. I dont have any clue as to why  users cnnot get to the internet from the WLAN except the LAN.
 
ITEMS
1.
CISCO CATALYST 2960-S
Part Number: WS-C2960S-24PS-L   
10
Part Number: CON-SNT-2960S2PS
10

[code]....

View 5 Replies View Related

Cisco Wireless :: 1260 And 3500 - Bridge With Two AP's

May 14, 2013

So I'm going to bridge two Cisco AP's 1260 and 3500, which have an 880 router on each side.
 
(Currently I have a VPN set-up through the internet for the two locations to communicate) (Naturally they are currently in different subnets) Will absolutely change this and set up as one subnet. There is VLANs setup on each router (same VLANs)
  
VLAN 1
  
And
  
VLAN 10 
 
Everything is configured on the Routers and AP's for these VLANs (works flawlessly over the VPN). 
 
So now since I’m going to get rid of the VPN and set-up a bridge with two AP's, will having same VLANs across both routers be a problem? Will VLANs work OK through the bridge?
  
Besides using (IP helper address DHCP-IP) command on the non-root bridge side router to forward DHCP requests to the root bridge side router, Also I want to be able to route internet traffic on the non-root bridge side through the WAN port, and only route LAN traffic through the bridge..

View 1 Replies View Related

Cisco Wireless :: Aironet 3500 LAP Without Controller?

May 4, 2012

We have couple of Cisco Aironet 3500 Series access points with the following P/N: "AIR-CAP3501E-A-K9", we have discovered that we need a wireless LAN controller to connect those new access points!, however, we do not have any wireless controller in our LAN.
 
We even tried to CLI through the console port but we could not set any static IP on it!, after reading on Cisco site we discover that this type of AP is called "Lightweight Access Point" LAP which handles all the management tasks to the controller!
 
So what shall we do! is it impossible to operate them without the controller?

View 6 Replies View Related

Cisco Wireless :: 3500 - CAPWAP QoS Configuration

Feb 9, 2012

We have had several APs disassociating from our controllers. The alerts say, Message: Access Point 'AP-xxxxx' associated to controller '10.x.x.x' on port number '0'. Reason for association 'Dot11g Mode Change. I have read several posts that point out that you should have QoS implemented to prioritize the CAPWAP traffic. I'd like to know if someone has implemented QoS and whether it has been successful in stopping the APs from disassociating. And if it has been successful do you have any configuration examples for the ports attached to the AP and controller as well as the QoS configuration?
 
We have several sites with AP1142's and 3500's. We have 2 5508 controllers. We are broadcasting 2 SSIDs of which one is in HREAP mode and the other is in local mode. Each of our sites have MPLS circuits.
 
Here is an example I found on Cisco which I believe can be used for CAPWAP as long as you change the ports to 5246 & 5247 instead of 12222 & 12223.

Example Router Configurations #
This section contains router configuration examples to be used as guides when addressing CS6 remarking or LWAPP control traffic load.
#
This example uses LWAPP APs on the 192.168.101.0/24 subnet, and two WLCs with ap-managers at 192.168.60.11, and 192.168.62.11. (code)

View 2 Replies View Related

How To Uninstall Deep Freeze Without Password

Mar 31, 2011

In my pc, one hardware engineer installed team viewer & later on he installed deep freeze software.Since I am not able to uninstall deep freeze bcoz he is not in contact with me now & I am afraid daily bcoz daily I gets message that some one is transferring my files & data.Since I am not sure with all the settings that he has done in my pc.I tried my self best to get solution but I am not getting any solution yet.Can I stop the person to access my files ?Can I uninstall Deep Freeze & Team Viewer from my PC since I dont know password of Deep Freeze ?

View 2 Replies View Related

Online Games Freeze For A Few Seconds?

Jun 9, 2012

whenever i try to play a online game (Gw2 Beta, Diablo3, LoL etc) it goes fine for a few minutes but then the game "freezes" for a few seconds. Meaning everything on screen stops. I.E my character keeps running on the same spot and so on.I tried checking if i lose the connection at the tray bar, but it says its connected during the "freeze" ingame.

View 19 Replies View Related

XP Applications Freeze When Printing Over Network

Mar 31, 2011

I've tried scanning for viruses, using winsock fix (they had a static ip I also set to automatic since they should not need it). I just turned off the firewall as well, tried "selective startup" and unchecked "load startup items" and nothing has worked so far. We're working on giving them another computer but I'd like to know why this happens.

View 7 Replies View Related

Internet Freeze And No Pages Will Open?

Jan 12, 2013

I just signed up for Time Warner - Road Runner internet service. I am currently hardwired via ethernet to the new cable modem (arris cm820) while I wait for my wireless router to arrive.The internet appears to be working fine (good speed), however, it stalls without fail every 3 minutes. It will freeze and no pages will open (FYI, it does not open a "you are not connected to the internet" page, it simply just sits there trying to load any and all pages). After about 5 minutes, the pages will suddenly load and the internet will work fine for another 3 minutes. Then, it will freeze all over again. Rinse and repeat. When this happens, the modem shows no physical signs of disconnection (all lights are on as normal) and network diagnostics on the mac shows that that the ethernet is still connected as well.I tried calling Time Warner and all they could say is that it "looks fine from our end, watch it for 24 hours and call back." So basically they knew nothing.

View 1 Replies View Related

Cisco Wireless :: Registering AP 3500 In Controller 5508

Apr 6, 2012

how an AP 3500 get to be registered in a controller 5508??, so, i have seen a lot of information of wireles deployment guide but i haven't understood yet how the process or flow is for getting the AP to be registered in a controller 5508, what exactly basic configuration must be done in a controller for doing it?

View 6 Replies View Related

Cisco Wireless :: 3500 How Many 5.8 GHz Antennas To Pick For Each Radio

Dec 3, 2012

I am building a BOM for a customer and I need to present cheaper options than 3500 or 3600 APs. I thought of these two models but I don't know what models of antennas to pick.1602 is a 3X3 MIMO with 3 antenna connectors. How many 2.4 GHz and how many 5.8 GHz antennas should I pick for each radio?2602 is a 3X4 MIMO with 4 antenna connectors. In this case I suppose there are 2 connectors per radio.

View 9 Replies View Related

Cisco Wireless :: 1262 / 3500 For WLAN Between Buildings?

Jul 4, 2012

I currently have WLC 5508 and a few campuses with LAP 1142, each with 2-3 vlan. Now one of our campuses have a building thas is a bit far away and needs network (wired). We can't get fiber or TP-cable there in a good way. So the plan is to get two 1262 or 3500 with AIR-ANT5160NP-R antennas and get a wireless link working between the campus and the building. And then connect one of the AP's to a switch in the other building to provide it with wired network.
 
The problem is that I can't find information on how to do it. Should both APs be in autonomus mode? I probably only need to have 1 VLAN in the other building but I am not sure yet. Is there a problem with transfering several VLAN over the WLAN-link?

View 3 Replies View Related

Cisco Wireless :: 3500 Clean Air - No Green Or Blue LED

Mar 3, 2013

Just had some more 3500i installed,but 2 of these seem to be working, but there is no green LED when no connection, and when you conneect there is no blue led. The LEDs to change when rebooting the AP, just neve seen this before, is this a fault?

View 5 Replies View Related

Broadband :: When Try Open Some Attachments Screen Freeze?

Feb 28, 2011

When i right click to open attachments some will not open, the page freezes and i have to booth computer to get rid of it, this only happens on some attachments, most open ok,i know where they are coming from so they are safe to openI've got Vista Home Basic 32

View 1 Replies View Related

Computer And All Connected LAN Devices Freeze Simultaneously

Jun 10, 2012

It started happening back in around November, my sister and my computer would start freezing occasionally, slurring the audio into a robotic sound, eventually to come to.It gradually got worse, and I assumed it was a graphics card problem since it would freeze ONLY SOMETIMES and say that the graphics driver stopped working and has recovered. It usually didn't say that, though.Lately though, I noticed that when it would freeze sometimes the internet would go out for some connected devices, such as the Xbox 360. The only computer that was NEVER affected by this is the one connected directly by Ethernet to the Netgear router, (every other device is WiFi.)

Sometimes even, my sister and mine would freeze simultaneously. It was a sort of rare occurrence, though.I very lately started to notice that it would freeze when trying to load internet components with larger amounts of data, such as server console logs, Flash videos, and Soundcloud players. What threw me off is that it would sometimes freeze in programs like FL Studio or Windows Media Player... It's possible I guess that the programs were unrelated and what caused the freeze is SOMETHING sending/receiving corrupt packets.

View 6 Replies View Related

Video Stream And General Download Freeze?

Sep 19, 2012

I think there is a problem with the settings on my router or something like that. When I watch videos on streaming sites the load bar tends to go up but only so far before freezing. If you slide the button along once the umbrella spinny thing gets going then the load bar will kick back into life again for a few seconds before freezing! The problem also effects downloads. Anything that takes longer the 5 or 10 seconds will fail. This has stopped me downloading simple things such as iplayer and flash updates. I know its not a problem with my computer as it effects all the machines that pass through the house. Were currently getting Virgin wireless broadband (so I dont think its a speed issue).A tecky friend of mine thinks it might be something to do with the 'packets' of information or the channel that my router is operating on

View 16 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved