The problem am having is that my Users can get to the internet on the LAN but cannot get to the internet thro the WLAN. Below is the cisco equipment used to setup the WLAN and LAN. I dont have any clue as to why users cnnot get to the internet from the WLAN except the LAN.
ITEMS
1.
CISCO CATALYST 2960-S
Part Number: WS-C2960S-24PS-L
10
Part Number: CON-SNT-2960S2PS
10
[code]....
I have a customer who bought Cisco Aironet 3500 Series. Currently 4404 WISM Controllers are installed with 1142 Access-Points. The WLC-Version is 6.0.199.
Will the 3500 Series Access-Points work? (Of course without the spectrum intelligence feature)?
The Q&A says the following: Are there any concerns with supporting the new Cisco Aironet 3500 Series Access Points with the older Cisco 2000, 2100, 4100, or 4400 Series Wireless LAN Controllers?
Recently i have visit some site for survey of wireless (WiFi). My client ask to provide the Access Point inside the Cold storage of factory( For RF scanners) The temperature of the place is -25 C to -30 C. I have go throug the wireless option of cisco like 1200 series, 1100 series, 3500 series, but all of these operate maximum of -20C. while only out door access point ( cisco 1500 Series ) support such low temparture.
View 13 Replies View RelatedI am upgrading a large number of 1142 access points with 3500's does and one know if the back plate for the 1142's can be reused for the 3500's.
View 4 Replies View Relatedi access points in our network.I want to connect with 3550 switch but access point is not working and getting the below error
controller port error.
IOS image --=c3550-i9q3l2-mz.121-20.EA1a.bin
Switch Model---WS-C3550-24PWR-SMI
I want to know ,this access point is supported on this switch ?
I can't find info about Access Restrictions in new series of routers.[URL]Do new routers have both Parental Controls + Internet Access Policy? I need this [URL]
View 2 Replies View RelatedHow to configure ssh in all access points ( cisco 3500 Access points ) under wlc 5508 ?
View 3 Replies View Relatedlinks with information / guidelines for the initial setup for this Access Point?
View 7 Replies View RelatedI am trying to config my wireless lan controller (WLC) 2106 to discover my new 3500 access points.I followed the example Cisco configuration doc.69719.I am using a Cisco 3760 switch to interconnect the AP and WLC.I set up DHCP in the switch. [code]
View 6 Replies View RelatedSo I'm going to bridge two Cisco AP's 1260 and 3500, which have an 880 router on each side.
(Currently I have a VPN set-up through the internet for the two locations to communicate) (Naturally they are currently in different subnets) Will absolutely change this and set up as one subnet. There is VLANs setup on each router (same VLANs)
VLAN 1
And
VLAN 10
Everything is configured on the Routers and AP's for these VLANs (works flawlessly over the VPN).
So now since I’m going to get rid of the VPN and set-up a bridge with two AP's, will having same VLANs across both routers be a problem? Will VLANs work OK through the bridge?
Besides using (IP helper address DHCP-IP) command on the non-root bridge side router to forward DHCP requests to the root bridge side router, Also I want to be able to route internet traffic on the non-root bridge side through the WAN port, and only route LAN traffic through the bridge..
We have couple of Cisco Aironet 3500 Series access points with the following P/N: "AIR-CAP3501E-A-K9", we have discovered that we need a wireless LAN controller to connect those new access points!, however, we do not have any wireless controller in our LAN.
We even tried to CLI through the console port but we could not set any static IP on it!, after reading on Cisco site we discover that this type of AP is called "Lightweight Access Point" LAP which handles all the management tasks to the controller!
So what shall we do! is it impossible to operate them without the controller?
We have had several APs disassociating from our controllers. The alerts say, Message: Access Point 'AP-xxxxx' associated to controller '10.x.x.x' on port number '0'. Reason for association 'Dot11g Mode Change. I have read several posts that point out that you should have QoS implemented to prioritize the CAPWAP traffic. I'd like to know if someone has implemented QoS and whether it has been successful in stopping the APs from disassociating. And if it has been successful do you have any configuration examples for the ports attached to the AP and controller as well as the QoS configuration?
We have several sites with AP1142's and 3500's. We have 2 5508 controllers. We are broadcasting 2 SSIDs of which one is in HREAP mode and the other is in local mode. Each of our sites have MPLS circuits.
Here is an example I found on Cisco which I believe can be used for CAPWAP as long as you change the ports to 5246 & 5247 instead of 12222 & 12223.
Example Router Configurations #
This section contains router configuration examples to be used as guides when addressing CS6 remarking or LWAPP control traffic load.
#
This example uses LWAPP APs on the 192.168.101.0/24 subnet, and two WLCs with ap-managers at 192.168.60.11, and 192.168.62.11. (code)
how an AP 3500 get to be registered in a controller 5508??, so, i have seen a lot of information of wireles deployment guide but i haven't understood yet how the process or flow is for getting the AP to be registered in a controller 5508, what exactly basic configuration must be done in a controller for doing it?
View 6 Replies View RelatedI am building a BOM for a customer and I need to present cheaper options than 3500 or 3600 APs. I thought of these two models but I don't know what models of antennas to pick.1602 is a 3X3 MIMO with 3 antenna connectors. How many 2.4 GHz and how many 5.8 GHz antennas should I pick for each radio?2602 is a 3X4 MIMO with 4 antenna connectors. In this case I suppose there are 2 connectors per radio.
View 9 Replies View RelatedI currently have WLC 5508 and a few campuses with LAP 1142, each with 2-3 vlan. Now one of our campuses have a building thas is a bit far away and needs network (wired). We can't get fiber or TP-cable there in a good way. So the plan is to get two 1262 or 3500 with AIR-ANT5160NP-R antennas and get a wireless link working between the campus and the building. And then connect one of the AP's to a switch in the other building to provide it with wired network.
The problem is that I can't find information on how to do it. Should both APs be in autonomus mode? I probably only need to have 1 VLAN in the other building but I am not sure yet. Is there a problem with transfering several VLAN over the WLAN-link?
Just had some more 3500i installed,but 2 of these seem to be working, but there is no green LED when no connection, and when you conneect there is no blue led. The LEDs to change when rebooting the AP, just neve seen this before, is this a fault?
View 5 Replies View RelatedI have upgraded my 'old' Linksys router to a new Cisco 3500 and I can only connect to the new router via Wi-Fi... When I connect using hard-wire - the computer tells me I hve no connection! Same computer works just fine w/old router
Dell Inspiron duo - Windows 7 - Cisco 3500
We are deploying a new office and exploring the options for WLAN deployment. We were pretty impressed with 3500 series APs and that it supports CleanAir.However, we have decided to go for standalone AP deployment model now. As 3500 does not work in standalone mode, so we are looking for APs that can work in standalone mode ( and later can be converted to lightweight if needed). We can go for 1140 in that case. However, it would be better for us to know the main differences between features supported by 3500 lightweight AP and 1140 standalone AP. CleanAir looks like the main one. Are there other important ones as well?
View 2 Replies View RelatedI have problem with this 2 AP model 3500i out of 140 APs. below is my finding:-
1. Suspected AP froze with bright white light and dissociated from controller
2. After bounce back (shut / no shut) the port, its working as normal
3. In a while, its repeat to (1.)
4. Direct console to the AP, no output is seen.
From NCS & controller log, its only show as below:
AP 'TTR13-A03AP0076' disassociated from Controller '10.209.116.16'
AP 'TTR4-A02AP0014' disassociated from Controller '10.209.116.15'
Would like to check out some client side setting on Wireless 802.1x authenticaiton.
Network setup is using
- Cisco WLC 7.2 and AP3500,
- ACS 5.3
- Microsoft Windows server 2008 hosting AD and CA services (same machine)
- Client OS is Microsoft Window 7.
Authentication mehtod would use PEAP-MSChap V2 Combo.
My question :
01. In AD environment, should ACS 5.3 be part of the domain computer?
02. To have secure connectivity, IF the security policy force client to check "Validate server certificate", which certificate it is look for? Is it ACS's identity certifate, that require CA server to sign on the CSR?
03. Back to client side, should the client also need to import this certificate in trusted root certification authorities?
Or the client will trust ACS identity certificate against the root CA certificate store at client's trusted root certification authorities, where they have the identical issuer?
04. Extra question: If no CA environment, would it be sufficient simply export ACS self-signed certificate and import to client computer, and it's trusted?
Lost my access points to controller. Not sure if it was related to upgrade from 7.1 to 7.2, or something else.
The console log on APs shows;
*Mar 1 00:01:09.394: %CAPWAP-3-ERRORLOG: Go join a capwap controller
*Jan 1 10:24:23.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 142.100.64.8 peer_port: 5246
*Jan 1 10:24:23.424: %DTLS-5-ALERT: Received FATAL : Certificate unknown alert from 142.100.64.8
*Jan 1 10:24:23.424: %CAPWAP-3-ERRORLOG: Bad certificate alert received from peer.
*Jan 1 10:24:23.424: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 142.100.64.8:5246
*Jan 1 10:24:23.424: %CAPWAP-3-ERRORLOG: Invalid event 38 & state 3 combination.
All 3500/3600 APs, had been in production for months.
I'd like to know your experience regarding how client count affects performance.
What I have seen in a university network, with a very high client densiity, using 3500 APs, is that around 55 clients ping reply time gets over 200 ms; around 60 users there's packet loss; then, as CC increases, somewhere between 60 - 70 the service gets totally lost. Off course, this depends on bandwidth consumption per user, interference, etc.
Also, I'd like to know what we could expect from 802.11ac regarding this topic. Is there any information on tests, or some estimation already published?
I have a project where I need to connect two building using a wireless bridge.I cisco specialist told me to purchase two 3500 (AIR-CAP3502P-A-K9) access points and an external antennas.The problem I have is these access points will need something to control them. If the access points will be in separate buildings will I need a controller on either side of the bridge to get them to work?What other cisco AP device capable of 300Mps dual band that are autonomous and can bridge between two buildings that are a 50 yards apart?
View 3 Replies View Relateda customer has bought a new AP 3500 with external antennas and he would like use his old antenna AIR-ANT2485P-R.
We have the option to configure the antenna parameter in WLC under Wireless > Access Points > Radios > 802.11a/n or 802.11b/g/n for external antenna and and using only port A.
But if we enable only one port (Example: port A) we will get a warning message: Need to have at least both dual mode antennas (antennas A and B) enabled
Is it not possible to use an antenna like ANT2485P-N together with an Access Point like 3502E?
I had the store set up my EA3500 which is a dual band...home 1 and home 2. I can only see home 2 which is the smaller band width.
View 1 Replies View RelatedI am doing a predictive survey for a very large mixed environment facility.I have advised this customer that it would be best to have a professional site survey done and he understands but has requested I do a preliminary predictive survey and recommendation. This will have both open area manufacturing and also warehouse type areas with 18ft racks and cages, The actual ceiling height is approx. 30 ft. but the building steel I-Beams are at 18 ft and would be the mounting height of the AP. I already have several installs in other buildings with the exact same structure and setup using 1242 AP and AIR-ANT2465P-R and AIR-ANT5170P-R patch antennas mounted to a board, pointing down and at 18ft.
My question is: I would like to use either the 3500E or 3600E AP with diversity patch antennas (3600E & air-ant2566 for example) but see that Cisco also recommends the 2dbi stubby Omni dipoles in this type environment. I'd just like to get some opinions and thoughts on AP and antennas.
Can we enable ssh on 3500 /3600 APs along with use radius for login authentication? idea here is to that ssh will provide another method to access the AP for troubleshooting purposes.I know with autonomous mode APs this should not be an issue but not sure with lightweight APs.
View 2 Replies View RelatedI have a new wireless configuration on a 5508 WLC. the controller is licensed for 12 AP's. I have plugged 8 AP's into the wireless vlan and 6 out of 8 come up with IP address and connect to the controller, broadcast two configured SSID's all seems good with them, but i have two AP's that do not get IP addresses. they are in the correct vlan i can plug a laptop into the group of ports in the val and get an IP address. So it seems to be just the AP's that don't. if i look at the consol of the AP it says: Waiting for PHY to auto negotiate . then it say timed out and continues to "boot with errors" then it continues to complain that it has no ip address. I have rebooted a few times and changed ports, and patch cables.
View 3 Replies View RelatedWhy is the 2700 faster if the 3500 is more expensive ? 2. will cisco put out a firmware that allows me to block more then 100 urls and keywords cuz as it is now i find that limiting it to only 8 urls makes the new linksys routers useless and NO i wont use opendns they are slow and charge you to remove the ads thats why i use the keyword blockin to block popups and ads 3.will a firmware upgrade make the 3500 faster then the 2700 later on ?
View 4 Replies View RelatedI just had Comcast setup my internet and it is really fast. 30 down, 10 up, 40 ping, my connection to my computer (wireless) is very fast and my online gaming (wired) is not laggy at all.The problem lies with the connection dropping when I am online gaming. I connected directly to the modem and there's no problem at all. I connect to my Linksys EA3500 and once I start playing in an online game, I disconnect from Xbox Live and am dropped from the game... anywhere from right away until about 10-15 minutes into the game. This is the only time where my connection falters at all, otherwise it is great. But I play online a lot, and competitively, so I obviously need a stable connection.I have not had this issue with my previous ISP in New York, Time Warner and that connection was much worse. I'm thinking it must be a setting on the router that is causing this, but I can't pinpoint what. I tried automatic AND static connections from my xbox to the router. On the static connection, I even put a DMZ on it, but to no avail.
View 9 Replies View RelatedI have had the EA 3500 router for about three months.
The Parental Control of Cisco Connect Cloud block all site except YouTube ! I have the Parental Controls set up to "Block the Internet" at "Specific Times". The other popular sites are blocked: Facebook, The Chive, Tumblr, etc. But for some reason she is still about to view YouTube all day long!
It has the latest firmware. I spent about three hours on the phone with Cisco tech support about this. They uninstalled and re-installed the router - it still doesn't work!
Just upgraded our WCS server to the 7.x code over the weekend. Turned up the first 3500 series AP's today. The AP's have been up for about an hour. I am seeing the Air Quality graphs on WCS. On the Worst 802.11a/n and 802.11b/g/n Interferers windows, I am see a WCS System Error Page message but only in those windows. I have gone over the documentation and dont see that I need to enable anything else on WCS.
View 10 Replies View RelatedWe are planning to implement Aironet 3500, Do we need to have controller to install it or can we install as standlone AP.
View 1 Replies View Related