Linksys Wireless Router :: Reason For 2700 Faster If The 3500 Is More Expensive?
May 31, 2012
Why is the 2700 faster if the 3500 is more expensive ? 2. will cisco put out a firmware that allows me to block more then 100 urls and keywords cuz as it is now i find that limiting it to only 8 urls makes the new linksys routers useless and NO i wont use opendns they are slow and charge you to remove the ads thats why i use the keyword blockin to block popups and ads 3.will a firmware upgrade make the 3500 faster then the 2700 later on ?
View 4 Replies
ADVERTISEMENT
Aug 10, 2012
I am trying to enter a 'command' in what should be the diagnostics tab in other routers. Where I can enter this information in the new EA2700 advanced settings?
View 1 Replies
View Related
Sep 15, 2012
I'm having issues with a newly bought EA 2700 router, I'm getting disconnected every 30-60 minutes. (It's a brief disconnect for about 10seconds, perhaps a huge packet loss or something?)I've tried connecting directly to the modem and that seemed to have fixed the problem, so I think that it is a router issue...? Also, my download/upload/ping is 35mbps download, 35ish mbps upload, and 8ms. (I have a 35mbps connection so that's fine) But when I connect my PC to the modem directly, my MS becomes 5, and my upload jumps to 77mbps. The download stays the same...
View 9 Replies
View Related
Jan 31, 2012
I have a E2000 for a half a year now.We have been on hollyday for 5 days so my routers has been shutdown.Today it happend 3 times that my complete LAN disconnected for no reasonI didn't have any wired or wireless connection.
View 5 Replies
View Related
Oct 28, 2011
I have a E2000 for a half a year now.We have been on hollyday for 5 days so my routers has been shutdown.Today it happened 3 times that my complete LAN disconnected for no reason. I didn't have any wired or wireless connection
View 9 Replies
View Related
Jan 11, 2010
I just bought a new WRT120N Router. It worked perfectly wired and wireless.But my old laptop burned, and the new one came with a Atheros AR5B93 Wireless Network Adapter, which is Draft-N compatible.The laptop connects to the router fine, but using only the G type. When I set the router to use only 802.11n, i get a message from Windows, like: "Windows was unable to connect to the network."because the N configuration is much faster than the old G.
View 9 Replies
View Related
Sep 29, 2012
am having speed issues on the wireless side of my WRT54GL v1.1 router.When I hook up a laptop to the wired port, am getting roughly 5.4mps down when wired, but only 1.2mpbs down on wireless. I am tried doing a factory restore. I have made sure that no QoS is in place. I have tried multiple devices to make sure it is not something on the device side causing this problem, but all the devices perform just as poorly on wireless but as well on wired.
View 5 Replies
View Related
Jan 11, 2012
I just got an E1200 router and connected wired to my win 7 machine, Im clocking in the single digit ranges (~8 mbs) download but on my dusty old win xp laptop wireless, Im getting 20 mbs (max speed from isp 20 mbs). Wife's Mac laptop wireless, same speed. What is going on? I updated the firmware, tried altering some settings based on other entries here suggested (WPA-personal, channel to "6") but no effect.
View 2 Replies
View Related
May 17, 2012
I had the store set up my EA3500 which is a dual band...home 1 and home 2. I can only see home 2 which is the smaller band width.
View 1 Replies
View Related
Dec 30, 2012
I have upgraded my 'old' Linksys router to a new Cisco 3500 and I can only connect to the new router via Wi-Fi... When I connect using hard-wire - the computer tells me I hve no connection! Same computer works just fine w/old router
Dell Inspiron duo - Windows 7 - Cisco 3500
View 2 Replies
View Related
Nov 8, 2011
Have high speed cable and find that the wireless speeds using Speedtest.net are faster than when hooking directly into the E4200. Do I have something set incorrectly?
View 3 Replies
View Related
Jun 29, 2012
I can't find info about Access Restrictions in new series of routers.[URL]Do new routers have both Parental Controls + Internet Access Policy? I need this [URL]
View 2 Replies
View Related
Mar 30, 2013
I just had Comcast setup my internet and it is really fast. 30 down, 10 up, 40 ping, my connection to my computer (wireless) is very fast and my online gaming (wired) is not laggy at all.The problem lies with the connection dropping when I am online gaming. I connected directly to the modem and there's no problem at all. I connect to my Linksys EA3500 and once I start playing in an online game, I disconnect from Xbox Live and am dropped from the game... anywhere from right away until about 10-15 minutes into the game. This is the only time where my connection falters at all, otherwise it is great. But I play online a lot, and competitively, so I obviously need a stable connection.I have not had this issue with my previous ISP in New York, Time Warner and that connection was much worse. I'm thinking it must be a setting on the router that is causing this, but I can't pinpoint what. I tried automatic AND static connections from my xbox to the router. On the static connection, I even put a DMZ on it, but to no avail.
View 9 Replies
View Related
May 3, 2011
I'm not entirely sure what's going on. I run 4 computers on this network, 2 Windows Xp, 1 Windows 7, and 1 Linux. All of which cannot access AIM, Gchat, and Minecraft(lol). I have no idea what would cause this, I run DD-WRT on my router(Linksys WRT-54G). I've checked all ports and I don't have anything blocked. I seriously need to fix this because I use AIM for my work. I can't even get into AIM Express which is web-based(tells me to check my network connection.
View 3 Replies
View Related
Sep 29, 2012
I have had the EA 3500 router for about three months.
The Parental Control of Cisco Connect Cloud block all site except YouTube ! I have the Parental Controls set up to "Block the Internet" at "Specific Times". The other popular sites are blocked: Facebook, The Chive, Tumblr, etc. But for some reason she is still about to view YouTube all day long!
It has the latest firmware. I spent about three hours on the phone with Cisco tech support about this. They uninstalled and re-installed the router - it still doesn't work!
View 4 Replies
View Related
Jan 22, 2013
Recently lost the setup for my newly installed ea6500 for no apparent reason. had to restart from the ground.I have the latest upgrade but wonder about the differences between the linksys coonect to the online version vs stand along versions. DO nor like expensive software that losses its setup for no good reason.I also irritated that I am unable to access my cable box. I own it and cable box and lynkiys has no right to block me from it. 192.168.100.1. I was able to accessed it with my Belkin router and I should be able to access with this expensive ea6500 box!!
We NEED a non-gui version. The gui is great for simple networks and people who do not want to know anything about their network. it's ment to be use to deliver additional services to us at a cost. duplicated or generates random users with ip or mac addresses complicating the parental control.
View 1 Replies
View Related
Mar 24, 2013
I just upgrade my service with Comcast so I can now get up to 50Mbps, however the modem when directly connected to the PC can obtain these speeds, it does not when the PC is connected to the E4200 router. In fact the Cisco Connect speed test shows the upload speeds (10+ Mbps) to be faster than the download speed(4.82 Mbps). I upgraded the firmware to the latest level but it did not make a difference.
View 4 Replies
View Related
Dec 9, 2011
I have the AE1000 adaptor on my wife's computer and direct wired on mine is the E2000.The e2000 is set to 2.4mhz and when connected to the wireless network, my wifes ae1000 shows it is connected at 144mbps.When I change the e2000 to 5.0 mhz and then my wife connects to the internet, she shows the ae1000 at 16-53 mbps. When I switch back to 2.4 she shows 144. I thought that when the e2000 is connected at 5.0 she should have a "faster connection".
View 1 Replies
View Related
Jan 15, 2012
I have two Cisco Location Appliances 2700 devices that has version 6.0.101.0 on. I'm having problems getting it to work. Any that can assist with this?
View 1 Replies
View Related
Aug 9, 2011
The compatibility matrix shows no support for a Location Appliance 2700 for any version 7.0.x.x for WCS and WLC. However, I did see a thread here where a v6.0.x.0 had compatibility. v6.0.202.0 is MD. Is it compatible with v7 WCS and WLC?
View 3 Replies
View Related
Feb 12, 2013
We plan on buying a Cisco 2700 wireless location appliance but I need to know if it will be compatible with our 2500 WLC.I've tried to look but cant find any document for this. Also can you deploy the location appliance without a WCS?
View 7 Replies
View Related
Oct 29, 2012
I have a Netgear WNR3500L wireless router. I assume it's v1 because on the back it doesn't have "v" anything. Firmware version V1.2.2.44_35.0.53NA.When I connect using g I get 22+Mbps download speed. When I connect using n I get 10 Mbps. I've tried using both WPA2 only (laptop reports 130 Mbps connection I believe) as well as the combo WPA+WPA2 (laptop reports connection of 117 Mbps).Broadband download results don't change - they stay at the 10 Mbps level. I've fiddled with some of the settings on my laptop's wireless card - but the results are the same.For now I'm just trying to figure out where I should focus my investigation and fiddling efforts - on the laptop or on the router.
View 5 Replies
View Related
Jun 1, 2012
Currently my home network is being switched via TrendNet TEGs80G unmanaged gig switches. I have been using them for about a year now with no issues. As my home network becomes more advanced, I recently just added a Cisco ASA5505, I am thinking about swapping those unmanaged devices, 4 of them, to managed. I was looking at the Cisco SG300-10 for upstairs, and a 16 port variant for my main core. These devices do not support full Cisco IOS cli, but they are manageable with a rich feature set nonetheless. My question is, should I swap the unmanaged devices with the more expensive Cisco devices, or just keep what works and save the money until I really need to spend it. As previously stated, my home LAN works just fine as it is, however my WiFi, NTV550s, server and workstations are all on the same network. Probably not the most secure but it is what it is without VLAN support.
View 11 Replies
View Related
Jan 15, 2007
I have a BEFCMU10 version 2.0 cable modem. My provider Insight Broadband has recently boosted their internet speeds. But I have found out that if my modem is not DOCSIS 2.0 compliant, I cannot get the faster speeds. How do I know if it is DOCSIS 1.1 or DOCSIS 2.0 compliant? I hope I don't have to replace the modem as it has given me absolutely no trouble since I have had it.
View 9 Replies
View Related
Nov 29, 2012
I have an N750 DB router and it has been rebooting every few hours for no reason. This has just started happening about 4 days ago. I don't know why but when I check the system logs its filled with the following. [code]
View 2 Replies
View Related
Apr 24, 2013
We have an SRP541W on which I thought I had disabled DHCP, its turns out that in fact I haven't. After seaching again for the DHCP on/off funtion I found it under the Vlan settings (Wierd place to put it I thought).
The Router has a static ip address on the LAN side of 192.168.1.254 and is connected to a Cisco 2700 series on the WAN side. Our network DHCP is served by an SBS 2011 server hence my reason to switch off DHCP on the router. However when I select Static IP address from the Address Type in the VLAN settings and try and save the changes I get an error that is IP Address / Subnet Mask value is illegal. Great but why when the router has and IP address assigned and the subnet mask is set do I get this error. On the VLAN settings page there is no option to set an IP Address
View 4 Replies
View Related
May 3, 2013
I would like to explain my situation. My house has 2 floors. My broadband modem is on the 2nd floor. I have an ea 2700 linksys router there, connected to the broadband modem. However, i can't get a good wireless signal on 1st floor, therefore i bought a second router, an e 4200 linksys.
I searched the web, and connected both routers via Ethernet cable, plugging them in lan ports. The ea2700 was only configured wireless security passwords. The e4200 had it's ip renamed to 192.168.1.2 and DHCP server turned off. Well, i have a problem here. the second router, doesn't give me access to internet.
View 1 Replies
View Related
Aug 18, 2012
My current home set-up is two desktops on Xfinity internet, using a MOTOROLA SB5120 modem pared with a WRT160N V3 router.I was told that my router was bottlenecking my download speeds. It is quite annoying when we can't download anything because it will slow any gameplay going on, we have to do one thing a time. Even Youtube videos will slow us down.[code] would I benefit from getting a new modem or router.
View 1 Replies
View Related
Jan 1, 2013
I just read online that in order to get real life high speed from your N router you need to set it to only N, or not have any other G devices connected. If not it wil fall back on the G speed.Here the text:" Wireless N claims "real world" speeds of 130-160Mbps, with a listed maximum of 300Mbps. This is reliant on the router transmitting in full 802.11n mode, which is impossible when an 802.11g device is also connected to the network."And if so. What is real life expected speed on the dir 655 on a wireless 300 card excelent connection either with pure N and then with combined N/G?
View 12 Replies
View Related
Aug 6, 2012
When I ping google from my computer I get 0% packet loss and average ping time is 35ms. But when I ping any device on my network the time is 147ms and 25% loss. Shouldn't it ping my devices faster?
View 3 Replies
View Related
Sep 30, 2011
I'm currently switching from a certain internet provider to another and I'm forced to get another router. What I wanted to do is since the initial router has to be on the first floor, I'd like to have the second one on the top floor closer to my computer whereas they would share a dedicated connection between each other wirelessly so it would make my connection faster rather than just having my pc connect directly wirelessly to the initial router on the first floor. Is that possible?
View 4 Replies
View Related
Aug 8, 2012
So i'm behind a fiber 100mbit connection, and for the past few weeks i've been noticing overall slowness on everything video related, from youtube to any kind of stream using flash video.If I try to watch a video on youtube it will constantly buffer, the same with stuff like ustream and the like.
The odd thing is that I have VPN service that I use to avoid regional restrictions, and when I use it to stream anything, then all the videos and streams are silky smooth and load pretty quickly which is odd since It should work on reverse. Also, a speed test through the proxy gives me no more than 10mbit, while without the proxy I get 95+mbit.
Is it something with the router? I've never heard of the ISP throttling stuff.Like I said, everything works perfectly, except video streams. I can max out torrents at more than 10 MB/s.The router im using is a D-link dir-855 (provided by my isp). I head about disabling QoS.
View 4 Replies
View Related
May 10, 2012
I am trying to add an AP (1231G) with autonomous code (Version 12.3(8)JEC2) to WCS (v7.0.172.0). I recieved the following error:
Failed to add device to WCS Reason: Unified AP with same MacAddress already exists in WCS. Remove Unified AP first.
View 9 Replies
View Related
