I have a BEFCMU10 version 2.0 cable modem. My provider Insight Broadband has recently boosted their internet speeds. But I have found out that if my modem is not DOCSIS 2.0 compliant, I cannot get the faster speeds. How do I know if it is DOCSIS 1.1 or DOCSIS 2.0 compliant? I hope I don't have to replace the modem as it has given me absolutely no trouble since I have had it.
View 9 RepliesHave high speed cable and find that the wireless speeds using Speedtest.net are faster than when hooking directly into the E4200. Do I have something set incorrectly?
View 3 Replies View RelatedI inherited a BEFCMU10 v.3 cable modem from my boss who switched to FiOS and I would like to use this with my Comcast connection.All I received from him is the cable modem and power adapter, what do I need to install and get this cable modem working? My router is WRT-54G.
View 2 Replies View RelatedI have Linksys Befcmu10 v4. I need to port forward and I cannot login. I have tried admin/password and all those combinations. I tried factory restore by pressing the thing in the back and still can't access the page
View 6 Replies View RelatedI have a BEFCMU10 v1 that has been misbehaving recently. It will go off line losing contact with the router and the Internet. It will stay off line for 8 to 10 minutes and then comeback on its own. If I cycle the power it will come up pretty quickly. Here is a log of a recent episode without power interruption.; [URL] Is there a solution or is it time for a new modem?
View 9 Replies View RelatedI am using linksys cisco wag120n adsl2 modem router.When I start the router the internet speed seems great but after some time the speed drops miserably. When I again restart the router the speed seems great for few mins but again drops after sometime.It happens in both LAN and wireless mode.The firmware version of the router is 1.00.16
I was going through the problems posted by some other user but observed that cisco people are not heraing to them.Seems made a mistake by associating with cisco product.This is the worst router I have ever used.The wireless also gets disconnected abruptly.Next time I'll avoid cisco.Cisco is all about stone age products and zero customer care.
A few weeks ago my internet speed suddenly became slow. Not so slow you can’t do anything without having to wait half an hour, but significantly slower than usual, and it also has occasional drop-outs. It can’t be an issue with the computers connecting to the router, which it’s doing fine as I can access my router’s setting though the IP address, but with the router connecting to the internet.
View 4 Replies View RelatedAfter upgrade to FW .04 on x3000 the router dramatically decreased the internet speed, besides the already discussed problem with cookies and authentication. Any archive for 1.00.03 (previous FW) - I think downgrading now is the only way to hve the router back to normal.
View 9 Replies View RelatedI got WAG200G and two computers, one connected by ethernet cable and laptop connected by wifi.How to configure router to get full speed of my internet connection on the desktop PC?Let's say i need 80% of my internet speed to download something on desktop, but in the same moment laptop also downloading something, how to setup router to get more downloading speed on the desktop.
View 1 Replies View RelatedI'm just wondering how I would get a faster upload rate. Is it my modem? Is it my internet connection? At the moment my upload rate is
View 4 Replies View RelatedIf a copy a file from my desktop to my laptop, the speed is usually 3 or 4 times faster than if I go in the other direction.
Desktop is connected to the router by a cable, laptop is wifi.
If I connect the laptop with a cable, speeds are fast both directions.
Router is a wrt54gl with dd-wrt. Both machines running Win7
Why would this happen? How can I identify the problem and fix it?
I cant figure it out and can not find a solution. All three computers have gigabit nics, I have gigabit router and switch, my d-link 321 is set to gigabit, the only thing on my network that is not gigabit is my printer. I'm not getting gigabit transfer speed from my computer to dlink 321. I rarely do computer to computer transfers, so I dont know what the speed is of that. The best tranfer rate is from 7-12mb. I am also using cat 5e wires on all connections. What am I missing?
View 12 Replies View RelatedSwapped wireless routers 150mbps for 300 mbps mimo for faster speed Will I see that additional speed on my wireless LAN?IOW, what conditions must be met before I can reap additional speed with my 11g laptop or my 11n hp Touchpad running both webOS and CyanogenMode 9?
Swapped
Rosewill RNX-N150RT 802.11b/g/n
for
Rosewill RNX-N300RT 802.11b/g/n(2T2R MiMo)
The modem checked out and was all good, the splitters are brand new and the line is apparently fine.This left the router as the issue. We had a Netgear router and attempted to replace it with a Linksys router.The firmware on both routers have been tested both old and new firmware.This happens to all computers/laptops connect to the network I do not receive a message stating that I was disconnected from the network, the internet simple cuts out for a little while and then comes back in.Cox says that they are 100% certain it is not on their end, nor is it the modem.The disconnects occur at random (there is no specific intervals). They last anywhere from 30 seconds to 10 minutes.
View 8 Replies View RelatedHow can I get Max network LAN speed from the X2000.I am connecting with a Macbook and an iMac both with N speed aiport cards.When checking the network speed through mac 'Network Utility' it is only getting 130 Mbps.Should it be getting closer to 300 Mps?
View 3 Replies View RelatedI have BSNL Broadband with speed 512 kbps. My old modem gives me speed 0.54 mb . i have checked it on speedtest.net .But my new WAG120N gives me less speed 0.15mb .Why this so happen?i checked all settings
View 1 Replies View RelatedI'm having issues with the wireless speed of my WAG160N. I'm using WPA2/AES, firmware: V2.00.20. The wireless connection signal is very good and the speed shows 130 Mbit/s.
On a wired connection when testing with numion.com I get 6 Mbit/s which is my DSL speed (this is great). On the wireless connection I get max 1,8 Mbit.
Is it possible to set one of the switch port of the Linksys WAG120N speed to force it to work just at 10Mb?
View 4 Replies View RelatedI have the above router, but I have noticed that the USB Transfer speed is very poor. I have a WD External HD plugged into the router and id i transfer filed from my server which is hardwired to the router I only get a transfer speed of about 2.5MB/s.
For a USB device I was kind of thinking I would be getting a minumm of atleast 50-60MB/s.
my router is connected to main router from my internet provider. When I use x3000 my download speed is half as fast as it should be (wifi and wired). When I connect to mian router directly (without x3000) both wifi and wired connection is at full speed.Is there any setting I should use to get full speed on x3000 - I have 24 Mbit/s?
View 1 Replies View RelatedHave noticed that wireless download speed deteriorated since they installed this?
Mine seems horrendously slower.
My ISP recently upgraded my line to ADSL2+. I am still only getting 1.36Mbps download speed across WiFi but if I connect my laptop to the router with ethernet cable I get 8.59Mbps. Why is the router slowing down my connection so much?
View 1 Replies View RelatedI recently upgraded to 1.0.3 fw on my x3000 in the hope of getting rid of the issue with my upload speed. However, now it is denying me connection to the outside world about once a day. It is getting an ip, even if I am renewing the IP address.I am using it on my Fullrate broadband 20/2 connection, and I can at most get 1mbit UL, but with the old router, I could get 2.1mbit. I bought this one because the other one sucked (the standard from my ISP).I have set the router up as the old one was, however, it is still slow, and now it also needs reset every day.
View 7 Replies View RelatedRecently I have changed my ISP and switched from an ADSL (4Mbps) connection to a faster fiber connection (100Mbps). I own an WAG120N which after firmware 1.00.12 (currently installed on the device is 1.00.16) should allow LAN1 to be used as WLAN. This is true and I can use it to connect to the new provider.
However the speed when using LAN1 as WLAN on WAG120N is very slow: download 20Mbps and upload 10Mbps. The LED on LAN1 is orange instead of green as before. I have tested the ISP connection with an WRT160NL and the speeds are much faster: download/upload 87Mbps
I recently moved from BT adsl (using the WAG320N) to Virgin 100mb ISP. I had reconfigued the WAG320N to use the ethernet WAN port and the Virgin router as a modem only. The problem I have is that the WAG320N is restiricting the download speed to 37MBs. Initially I thought it was a problem with Virgin but after many visits from Virgin engineers and extensive testing we found that the WAG320N was restricting the speed to 37Mb/s.I am now using the router provided by Virgin which is not ideal. Is there a fix as I cannot find one anywhere.
View 1 Replies View RelatedMy X2000 modem connect only with small speeds Kbps, it's very weak than Linksys WAG54GP2 MBPS. If I put laptop near the modem speed doesn't change.Only change occurs when I change the channel. But it speed down after a while.I set, N connection, security is WPA-personal, tried some different channel, connection 20-40mhz, update the firmware (there is no problem with laptop, with another modem I can connect with 150kb/s speed) And, if I choose auto setup, security change to WPA, If I'm not wrong.
View 3 Replies View Relatedi have the linksys wag200g with firmeare 1.01.09 and i have connected on it one desktop - laptop - netbook and if i download to any of these pc one and only file with the maximun download speed of my line(1.300kbps) and i send one file from one pc to another share folder one of these two files it is tooooo slow and In no situation doesn't both reach the maximun speed.
View 1 Replies View RelatedIs there a way to know from the web interface the wifi speed of the connected clients?
View 1 Replies View RelatedI'm pretty new to networking. Purchased a E4200 for my home line. When i connect directly through the modem i see speeds of about 600mbps but when i connect through the router via an ethernet cable on an empty port on the back of my e4200 my speeds drop to about 180mbps. I expected a speed loss going through wireless but why i am experiencing a speed loss by using the ethernet as a passthrough? I thought the ethernet ports on the e4200 were gigabit and support up to 1000mbps?
View 1 Replies View RelatedIve bought recently WAG160n and Ive watched that I have problem with slow speed of WiFi. On LAN cable its ok. Internet provider gives my up 20Mb/sec. download and up to 1Mb/ses. upload. Ive visited
[code]....
I add, that my previous router: WAG200G on this same line gives me 14-16 Mb/sec. download on WiFi. Why upload speed is ok, but download not?
I have a WAG160Nv2 with Firmware Version:V2.00.20 Two problems
1. Slow wireless speed - only 2Mbit - with cabte up to the lines max 15Mbit
2. The routers system time is wrong - it says " 03-01-2000 02:19:54" I have set the correct system time but no difference
I have tried a lot of wireless options and some of the timezones but i did not solve the problem
i'v recently bought a WAG120N for my home and set it up after that i checked that my wireless link speed on my laptop is 72mbps instead 150mbps after a few googling ive found that 150mbps is only avalaible on 40MHz radio band but in setup page i only found 20MHz.
View 2 Replies View RelatedHow to make my internet connection becomes faster?
View 5 Replies View Related