Linksys Wired Router :: Ea6500 Lost Setup For No Apparent Reason
Jan 22, 2013
Recently lost the setup for my newly installed ea6500 for no apparent reason. had to restart from the ground.I have the latest upgrade but wonder about the differences between the linksys coonect to the online version vs stand along versions. DO nor like expensive software that losses its setup for no good reason.I also irritated that I am unable to access my cable box. I own it and cable box and lynkiys has no right to block me from it. 192.168.100.1. I was able to accessed it with my Belkin router and I should be able to access with this expensive ea6500 box!!
We NEED a non-gui version. The gui is great for simple networks and people who do not want to know anything about their network. it's ment to be use to deliver additional services to us at a cost. duplicated or generates random users with ip or mac addresses complicating the parental control.
View 1 Replies
ADVERTISEMENT
Oct 8, 2012
I recently swapped a EA4500 for an EA6500 and have been experiencing intermittent Internet connection issues, specifically periodic disconnects (as some other users have reported). The router is connected to a Motorola SB6121 Cable Modem with Comcast as the cable provider. I contacted Comcast and they specify 1500 as the MTU size. With the Router set to Auto, I experience the periodic disconnects. When the MTU is manually set, I still experience the periodic disconnects, and I noticed that a ping test specifying the packet size with the -l switch results in a fragmented packet and is only resolved when the ping packet size is reduced by 28 bytes. Thus, it appears that the MTU specified on the router fragments all packets of that size and up to 27 bytes less than the MTU setting. For example, with the MTU set to 1500, all packets 1473 or larger are fragmented; with the MTU at 1444, all packets 1417 or larger are fragmented. I believe there is a bug in the current firmware, which I have installed on this router as version 1.1.27.141816. Regardless, even with the router set to Auto, the correct packet size is not properly detected and di
View 9 Replies
View Related
Jul 31, 2012
Just installed a DIR-615, not impressed so far I have 3 clients, a Windoze 7 laptop, a Kubuntu workstation (wireless N) and a wireless HP printer. When I enable DHCP reservations and reserve the addresses then save settings the router reboots and when I go back in all info is gone and nothing is reserved. I have been having weird disconnection issues - I lose my internet periodically for no apparent reason so I increased the lease time and am trying to reserve addresses.
View 3 Replies
View Related
May 30, 2013
I've run into an odd problem - I have connected two 2960s together with copper on FastEthernet interfaces, and STP on the new switch immediately puts that port into blocking mode. I don't understand why this would be, since there is only one connection between the two, in fact, there is only one connection at all on the switch that is blocking.
View 6 Replies
View Related
Dec 17, 2012
Region : Spain
Model : TL-WR1042ND
Hardware Version : v1
Firmware Version : 3.15.1 Build 120618 Rel.41178n
ISP : ONO
I have a wired connection to 12 MBs and is very stable.My problem is that the download speed becomes 12MBs to 2MBs without apparent reason.It is fixes if you restart the router.Here will show you the optimal speed of connection.
[URL]
When this happens again i'll show you the speed.
View 6 Replies
View Related
Oct 2, 2012
The only way I could get my EA6500 to work as auto DHCP to my Roadrunner Motorola SBV5220 Surfboard cable modem was to disable IPv6 support on the router. It appears that the EA6500 attempts to issue the DHCP request for address assignment from the modem using IPv6. I could see the status of "Connecting" for IPv6 in the Diagnosis Reports and it would hang. Once I disabled IPv6, the modem assigned an IPv4 address and everything worked fine. However, am I giving up any functionality by having to do this? I bought this router and the WUMC710 Universal Media Connector for the 5GHz connectivity for streaming and just wondered if I'm impacting UMC performance or any other functions of the router by having to disable IPv6.
View 1 Replies
View Related
Jan 11, 2013
I have just switched from an e3000 to ea6500 and all iPhone / iPad / PC control via port forwarding is lost.
View 3 Replies
View Related
Oct 28, 2012
Noticed this AM that a new firmware was releaesed to my EA6500!! Very surprised to find it Monday AM. I went ahead & updated my firmware but lost connectivity to my Comcast cable modem. I was leaving for work so I had to pull the router & revert back to my original Linksys router.zBig storm heading my way, figured the wifw ywould need internet to track Hurricane Sandy. Any others have a new firmware waiting for install this AM? Keeping my fingers corossed on this firmware upgrade. I'm hoping it solves the device map issue.
View 2 Replies
View Related
Feb 2, 2013
In first setup, error meaasge " we could not find your router :setup could not find your router's wireless signal ..." i checked cable and internet signal. i find one problem : the light of internet port of router is not blinking.i reset my router but problem is not solved.
View 5 Replies
View Related
Apr 20, 2013
I bought a new CISCO EA6500. During, first setting up, error was occurred. And, I cannot do anything with this product. How can I setup this one?
Error code: 0x82BF0306
Error description: A JNAP call to the device failed for an unknown reason.
Model name: EA6500
Model description: unknown
Serial number: unknown
Firmware version: unknown
Operating system: Mac OS X 10.8.3
Software version: 2.0.12254.2
Connection type (WAN): unknown
IP address (LAN): unknown
IP address (WAN): unknown
Computer IP address: unknown
View 2 Replies
View Related
Jan 13, 2013
How do I setup the Linksys ea6500 with two xboxes so I can have open NAT on both of them?
View 2 Replies
View Related
Dec 31, 2012
just set up my EA6500 in bridge mode, i have the Ethernet cable plugged into the EA6500's yellow WAN port, is that correct, Cisco Article ID: 24583 is not that clear, Cannot also seem to access the EA6500's settings to setup security?
View 2 Replies
View Related
Dec 27, 2012
After struggling with the setup of my new EA6500, I finally succeed in setting it up. Like other people in this forum, the setup process got interrupted approx., 90% in the setup process. After several factory resets and new setups, I finally was able to login locally to fulfill the setup and upgrade the firmware to 1.1.28.146072). After that, I do have wireless access, but the connection to my LAN connected NAS (Synology), is really really slow. Furthermore, when I try to use airplay to connect to my Airport express it drops out and starts blinking yellow? Finally, from time to time when I log in, I get the "No router found" message (can't remember the exact text). After a reboot I'm able to login. To me it seems that the firmware/router still is filled with a lots of bugs. I think I will downgrade to my old E4200, during the next couple of days, and return the EA6500.
View 1 Replies
View Related
Jul 19, 2012
I've lost my set-up disk for my Linksys model WRT160N V3.
View 1 Replies
View Related
Jan 14, 2011
[url]...
One poster gives the password which is arbitrarily substituted but when I tried that (having had the same problem), I couldn't get it to work and had to reinstate factory settings and repeat the configuration from scratch.Now, for some reason, I can't even do that anymore! 'admin/admin' is no longer accepted, and if instead I try to open the configuration using the Setup Wizard CD I get an error message saying "Unable to connect..." and telling me to press the 'reset' button (which I have of course done, to no avail). Yet pinging the router produces an immediate successful response and my access to the internet is as before.
View 3 Replies
View Related
Apr 18, 2013
I am looking at buying the EA6500 router. However, before I make the investment into buying this router, I need to know some basic information first.
1. I want to setup the EA6500 to accept FTP requests to my Windows Home Server. Yes or No?
2. Remote access to the EA6500, Yes or No? i am aware of the security risks
3. I need to setup Port forwarding on the EA6500. I assume I can?
4. Manage a Kindle Fire and other wireless devices?
View 5 Replies
View Related
Nov 13, 2007
I have a BEFSR41 V2 working as dial in ADSL connection.While I changed my settings of the UPnP in the router I lost access to the admin page. Well most strange is that everything is working.I kept my internet access as well as the computer and printer access.The only thing I lost is access to the router admin page.The password it was not defaulted to admin, neither kept the password that I had set up.
View 9 Replies
View Related
Aug 12, 2012
My harddrive failed. I got a new one and need to connect to my home network, but don't remember the user name or password for the router. I no longer have the setup cd. How do I reset the router and set up the entire home network again without the cd?
View 2 Replies
View Related
Feb 27, 2009
I have lost my installation disk for my WRT54G Version 8. Where I can download the drivers and installation.
View 9 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Jan 24, 2013
We share a common fibre connection to the internet. In the basement we have a modem/router(zyxel) which is in "bridge mode". Therefore not acting as DHCP.Behind this zyxel we have a Cisco RVS4000 router. Ports 1 and 2 go to family A, and Ports 3 and 4 go to family B.Family A and B have separate routers which are both set to "access point mode". Family A has an ASUS RT-N66U router while family B has a dlink DIR-615. The asus has an "access point mode" while the dlink needs to be set up manually to achieve this. The dlink must also have a static IP adress. The asus can receive ip adress.
View 1 Replies
View Related
Mar 16, 2011
We have a Network set up with a RV042 router. Router is hooked up to Cox Cable and ATT DSL. Currently have 20 computers hooked up to the router all using Static IP addresses. Setup has been in place for over 7 years. I want to set up a Wireless Access point on this network. The problem is, I can't seem to get DHCP to work right even WITHOUT the Wireless Access Point. I have taken one of the computers that works great with a static IP and changed it to be DHCP, I have enabled DHCP on the router and set the from and thru parameters for the IP assignment. The computer will connect and get an IP address and it allows me to see all the INTERNAL servers on the network but going to the Internet is REAL FLAKY. I usually have to refresh 5 or 6 times to get a web page and sometimes even that don't work. If I do get a page to come up there is about a 10% chance that it will bring up a subpage of that page without doing a refresh 5 or 6 times. Its like it won't hold the connection to the Internet. I did notice one thing different in the User Manual of the RV042 that is different than all the other Linksys routers I have worked with. It says that when you enable the DHCP on the router, you then make sure ALL computers hooked to it are set for DHCP. All other routers I have worked with do NOT use that word ALL. Am I missing some setting or is this a binding thing where you are either ALL static or ALL DHCP?
View 1 Replies
View Related
Dec 19, 2012
How to setup the quickvpn.... I am getting the message Servers certificate doesnt exist on your local computer..... and the the window fail to establish the connection
View 1 Replies
View Related
May 1, 2012
I'm trying to setup 2 subnet with two RV042 routers. One router will act as a gateway and both WAN ports will be used by two different isp connection. The first router (gateway) LAN IP will be 192.168.0.1/24.I would also like to set up another router behind the gateway with with separate subnet 192.168.1.X/24. And I would like clients on the 192.168.1.x subnet to use the internet through the gateway router and clients on the 192.168.0.x subnet to access resources on the 192.168.1.x subnet. Am I able to do this with two RV042?
View 1 Replies
View Related
Nov 24, 2009
I have a RV042 router and we are trying to set-up our OWA for outside access. I can't figure out which ports or which page those ports are on to open them. We are a small company and we do not have IT except for ourselves. The internal network works fine but i can't get the Exchange access from outside.
View 2 Replies
View Related
Nov 5, 2009
I have two PCs hooked up to the same router, a BEFSR41. Both connect to the internet fine. One can access the router setup/admin page fine. On the other one, though, the router asks for a user name and p/w, but the setup screen never loads. I get the eternal "Loading" message but it never gets there.
[code]....
View 8 Replies
View Related
Feb 23, 2011
I'm trying to setup a VPN Tunnel between RV082 and WRV200.The RV082 has an static IP, the WRV200 has a dynamic IP. I have to Dyndns.org in the WRV200.I have setup the RV082 tunel auth like: Dynamic IP + email.In the WRV200 I setup the hostname with the username, and the domain with the domain part of domain entered in the RV082.In the RV082 VPN Log I got: Initial Aggressive Mode message from 11.22.33.44 but no (wildcard) connection has been configured.It seems to be working the IPSEC setup but the RV082 does not accept the connection because of a missmatch in the Remote Security Gateway Type parameter in the RV082.
View 1 Replies
View Related
Sep 1, 2011
On a BEFVP41, I disabled snmp for testing (because it was sending some strange alarms), and now I can't login to the web setup pages. The username and password no longer work. I thought maybe it reset itself to default (blank/admin) but it didn't.
View 1 Replies
View Related
Dec 2, 2011
I've brought a SG300-10 switch and would like to connect it to an Apple Time Capsule (as the base station of my wireless network), Apple Airport Extreme (to extend my wireless network) and 3 x NAS. What is the best way to connect?
Internet > SG300 > Apple TC + NAS x 4 + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sInternet > Apple TC > SG300 > NAS x 4 (connect to the SG300) + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sI need the SG300 because the Apple TC doesn't have enough network ports to cennect all my other devices.
View 1 Replies
View Related
Aug 11, 2011
I have just setup a E2000 at home. All the wireless connections work and also my NAS server who i wired. But when i try to setup my wired media server it will not connect.
View 6 Replies
View Related
Jan 10, 2012
I have the Linksys BEFSX41 wired Firewall router. My ISP is Verizon DSL. The DSL modem is a Westell 6100G. I have the wall phone line connected to my modem. The output of the modem is going to the input of my Linksys router. I have two computers connected to the router outputs. In order for me to see the output or configuration of my Westall modem, I have to go http://192.168.1.1. In order for me to see the configuration of my Linksys router, I have to enter http://10.10.10.1. When I look at the instructions for setting up and configuring my Linksys router, it never mentions the above 10.10.10.1 address, but instead it tells me to enter the 192.168.1.1 address. I have never done this because when I powered both units for the first time, and it worked, I noticed then that my Linksys address was the 10.10.10.1. Why is it then that none of the settings or instructions for the Linksys router never mention to enter the 10.10.10.1 address as oppose to the one the do call out to enter which is the address for the Westell modem? What would happen if both addresses on both devices were the same?
View 2 Replies
View Related
May 31, 2012
I bought a new Linksys AE2500 dual-band wireless-N USB adapter but I misplaced the setup disc. Is there any way I can get another disc or download the setup files and then transfer them to my other computer?
View 1 Replies
View Related
Jul 18, 2011
Have a 400N wireless router that has been working fine with several wireless devices on a small home network for about a year. Nothing has been changed but suddenly all of the wireless wireless devices dropped offline and none see the network signal in their search to reconnect. All of the indicator lights on the router look good and I have unplugged power and reconnected first the cable modem and then the router but still no signal. Logging into the router seems to show that it is working OK but there is apparently no air signal for the client devices to detect so only the wired devices are showing up. It's as if everything is working except the antenna function. Are there any suggestions short of uninstalling and reinstalling the whole set up and see what happens? I have taken my laptop to a nearby hotspot and confirmed that it is receiving other network signals fine so it has to be something to do with the router itself.
View 1 Replies
View Related
