Linksys Wired Router :: BEFVP41 - Can't Login To Web Setup After Disabling Snmp

Sep 1, 2011

On a BEFVP41, I disabled snmp for testing (because it was sending some strange alarms), and now I can't login to the web setup pages. The username and password no longer work. I thought maybe it reset itself to default (blank/admin) but it didn't.

View 1 Replies


ADVERTISEMENT

Linksys Wired Router :: QuickVPN From BEFVP41 To RV042?

Sep 24, 2006

my office network is running using a Linksys Router RV042 and at home i have a Linksys Router BEFVP41. i'm trying to setup a QuickVPN from home to my office but having problems. both routers have different LAN IPs. the firmware version for my two routers are listed belowRV042 - ver. 1.3.7.4BEFVP41 - ver. 1.02.00?

View 5 Replies View Related

Linksys Wired Router :: BEFVP41 V2.1- Getting Internet Access With All Restricted Application

Dec 28, 2011

I own a BEFVP41 v2.1. Under "access restrictions" I set days and time when access to internet it is allowed. Also applied "Website Blocking by URL Address" and "Website Blocking by Keyword" however some users are now getting access to the internet. I must also mention this settings: Firewall protection it is enable. Router DHCP it is disable and we use static IP address for the PC´S so I established IP range to apply the restrictions. I also try blocking with MAC address of the PC's.Everything else it has default settings. Internet wire goes first to the router and then to the LAN switch. What am I missing?

View 4 Replies View Related

Linksys Wired Router :: BEFVP41 / DHCP - Set Static Table IPs For Security Camera DVR?

Jun 22, 2011

I have enabled DHCP but want to set static table IP's for my security camera DVR and one computer, the others can remain dynamic. I know in other routers I can attach a LAN IP to a mac address to keep it static but I can't see where I can do that with this router.

View 4 Replies View Related

Linksys Wired Router :: BEFVP41 Backup / Store These Settings In Save Place

Mar 13, 2007

I use a BEFVP41 VPN router. I have changed several settings. How can I backup these settings and store these settings in a save place.

View 3 Replies View Related

Linksys Wired Router :: RV082 - Can The SNMP Trap To Field

Jan 25, 2011

I use SNMP and I dont have access to a router to test.Can the SNMP Trap to: Field in the SMNP section be configured for multiple IP addresses.?

View 1 Replies View Related

Linksys Wired Router :: RV082 Cannot Login Via LAN

Mar 15, 2012

I am using RV082 V3 router. After a reset of the router I have access via both LAN and WAN for some period of time (not yet known)  later that day or the next day when I try to access it via the WAN it sits on "opening page" for a while eventually coming up with the login box. After logining in the page only partially loads. (All the settings are shown, but the proper selections are not made.) Internet explorer will then show something like "8 items remaining" in the status bar. If I close and re-open IE I am unable to connect at all. At this point I also cannot login via the LAN. However, internet access appears to be fully function through the router and the router also responds to pings. (I have the latest firmware loaded.) The only resolve I've found is power cycling the unit to regain login access to it. Very irritating, and impossible when not at the physical location.

View 1 Replies View Related

Linksys Wired Router :: Rv016 Cannot Login A Website

Jan 6, 2011

I use Rv016  and config load balance  and connect to website [url]... and click Login BANK  it can't login and show error page [url].... When I try connect bypass don't use RV016 can connect it. when I try to close firewall service it can't not login again. 

View 1 Replies View Related

Connecting To Linksys Router 192.168.1.1 - No Login Setup Screen

Dec 8, 2012

Cannot connect to Linksys Router 192.168.1.1 Webpage, do not get login setup screen.

View 1 Replies View Related

Linksys Wireless Router :: EA-4500 Can't Login Into Setup Page

Oct 26, 2012

I'm trying to login to my EA4500 setup page. I have the "cloud connect" firmware and when I'm redirected to the "Linksys Smart Wi-Fi" page in my browser, I attempt to login as usual.It accepts my login name and password, and then I get a page that has a rotating graphic and it says "waiting..." It eventualy times out and takes me back to the login screen. I've tried to reboot my router and that doesn't work. I've also disconnected the internet connection from the modem, and entered the router main password, and that gives me the same response as if I tried to connect via the cloud.

View 9 Replies View Related

Linksys Wireless Router :: Wrt54gl And Wrt54g Setup WDS But Can't Login

Jul 18, 2011

I have wrt54gl setup with dd-wrt standard version running hotspotsystem.  3 wrt54g version 5 with dd-wrt micro setup as WDS client of wrt54gl.  After the intial setup I can log into the main router wrt54gl (192.168.1.1)and all 3 WDS routers (192.168.1.2 ,3 and 4), but after couple of days of testing suddenly i can not login to 2 of the WDS routers,
 
I mean I can connect to it and it will get me to internet but I can no longer login, it just says the page take too long to load.  I know if I do a hard reset and setup WDS again then it will work, but I dont want to keep doing that. Tried to power cycle the router but still wont work.  Is it the load on the router made it inaccessible ? 

View 1 Replies View Related

Linksys Wireless Router :: BEFVP41 - How To Route Traffic Through VPN Tunnel

Nov 10, 2007

I have set-up a Linksys BEFVP41 VPN router at home (192.168.1.1 / 255.255.255.0)

View 7 Replies View Related

Linksys Wireless Router :: RE1000 Wired PC Prompting User For Login Information For Wireles

Oct 30, 2012

I recently installed an RE1000, which seemed to be working fine. Then, on 3 PC's with no wireless adapter installed we began being prompted for user name and password for the wireless router. Once I unplugged to extender the problem went away. I know what you're thinking: Maybe I just think there's no wireless adapter on these PC's. NO, I looked in device manager and the only network adapter installed is the ethernet adapter. These are all 4+ year old machines with no hardware changes made to them. Wireless adapters are not necessarily standard issue on old towers--even on new towers. The Acer I'm using right now was purchased new in November 2011 and did not come with a wireless adapter installed.

View 3 Replies View Related

Linksys Wired Router :: How To Setup VLANS On RVS4000

Jan 24, 2013

We share a common fibre connection to the internet. In the basement we have a modem/router(zyxel) which is in "bridge mode".  Therefore not acting as DHCP.Behind this zyxel we have a Cisco RVS4000 router. Ports 1 and 2 go to family A, and Ports 3 and 4 go to family B.Family A and B have separate routers which are both set to "access point mode". Family A has an ASUS RT-N66U router while family B has a dlink DIR-615. The asus has an "access point mode" while the dlink needs to be set up manually to achieve this. The dlink must also have a static IP adress. The asus can receive ip adress.

View 1 Replies View Related

Linksys Wired Router :: DHCP Setup On RV042?

Mar 16, 2011

We have a Network set up with a RV042 router. Router is hooked up to Cox Cable and ATT DSL. Currently have 20 computers hooked up to the router all using Static IP addresses. Setup has been in place for over 7 years. I want to set up a Wireless Access point on this network. The problem is, I can't seem to get DHCP to work right even WITHOUT the Wireless Access Point. I have taken one of the computers that works great with a static IP and changed it to be DHCP, I have enabled DHCP on the router and set the from and thru parameters for the IP assignment. The computer will connect and get an IP address and it allows me to see all the INTERNAL servers on the network but going to the Internet is REAL FLAKY. I usually have to refresh 5 or 6 times to get a web page and sometimes even that don't work. If I do get a page to come up there is about a 10% chance that it will bring up a subpage of that page without doing a refresh 5 or 6 times. Its like it won't hold the connection to the Internet. I did notice one thing different in the User Manual of the RV042 that is different than all the other Linksys routers I have worked with. It says that when you enable the DHCP on the router, you then make sure ALL computers hooked to it are set for DHCP. All other routers I have worked with do NOT use that word ALL. Am I missing some setting or is this a binding thing where you are either ALL static or ALL DHCP?

View 1 Replies View Related

Linksys Wired Router :: How To Setup RV082 QuickVPN

Dec 19, 2012

How to setup the quickvpn.... I am getting the message Servers certificate doesnt exist on your local computer..... and the the window fail to establish the connection

View 1 Replies View Related

Linksys Wired Router :: Setup 2 Subnet With Two RV042s?

May 1, 2012

I'm trying to setup 2 subnet with two RV042 routers. One router will act as a gateway and both WAN ports will be used by two different isp connection. The first router (gateway) LAN IP will be 192.168.0.1/24.I would also like to set up another router behind the gateway with with separate subnet 192.168.1.X/24. And I would like clients on the 192.168.1.x subnet to use the internet through the gateway router and clients on the 192.168.0.x subnet to access resources on the 192.168.1.x subnet. Am I able to do this with two RV042?

View 1 Replies View Related

Linksys Wired Router :: RV042 - Setup OWA For Outside Access?

Nov 24, 2009

I have a RV042 router and we are trying to set-up our OWA for outside access. I can't figure out which ports or which page those ports are on to open them. We are a small company and we do not have IT except for ourselves. The internal network works fine but i can't get the Exchange access from outside.

View 2 Replies View Related

Linksys Wired Router :: BEFSR41 Works But Setup Won't Load

Nov 5, 2009

I have two PCs hooked up to the same router, a BEFSR41. Both connect to the internet fine. One can access the router setup/admin page fine. On the other one, though, the router asks for a user name and p/w, but the setup screen never loads. I get the eternal "Loading" message but it never gets there.
 
[code]....

View 8 Replies View Related

Linksys Wired Router :: Setup VPN Tunnel Between RV082 And WRV200

Feb 23, 2011

I'm trying to setup a VPN Tunnel between RV082 and WRV200.The RV082 has an static IP, the WRV200 has a dynamic IP. I have to Dyndns.org in the WRV200.I have setup the RV082 tunel auth like: Dynamic IP + email.In the WRV200 I setup the hostname with the username, and the domain with the domain part of domain entered in the RV082.In the RV082 VPN Log I got: Initial Aggressive Mode message from 11.22.33.44 but no (wildcard) connection has been configured.It seems to be working the IPSEC setup but the RV082 does not accept the connection because of a missmatch in the Remote Security Gateway Type parameter in the RV082.

View 1 Replies View Related

Linksys Wired Router :: Setup A SG300-10 With An Apple Time Capsule

Dec 2, 2011

I've brought a SG300-10 switch and would like to connect it to an Apple Time Capsule (as the base station of my wireless network), Apple Airport Extreme (to extend my wireless network) and 3 x NAS. What is the best way to connect?
 
Internet > SG300 > Apple TC + NAS x 4 + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sInternet > Apple TC > SG300 > NAS x 4 (connect to the SG300) + Apple Airport Extreme (to extended my wireless network) + Mac Pro/iMac'sI need the SG300 because the Apple TC doesn't have enough network ports to cennect all my other devices.

View 1 Replies View Related

Linksys Wired Router :: Ea6500 Lost Setup For No Apparent Reason

Jan 22, 2013

Recently lost the setup for my newly installed ea6500 for no apparent reason. had to restart from the ground.I have the latest upgrade but wonder about the differences between the linksys coonect to the online version vs stand along versions. DO nor like expensive software that losses its setup for no good reason.I also irritated that I am unable to access my cable box. I own it and cable box and lynkiys has no right to block me from it. 192.168.100.1. I was able to accessed it with my Belkin router and I should be able to access with this expensive ea6500 box!!
 
We NEED a non-gui version. The gui is great for simple networks and people who do not want to know anything about their network. it's ment to be use to deliver additional services to us at a cost. duplicated or generates random users with  ip or mac addresses complicating the parental control.

View 1 Replies View Related

Linksys Wireless Router :: E2000 When Try To Setup Wired Media Server It Will Not Connect

Aug 11, 2011

I have just setup a E2000 at home. All the wireless connections work and also my NAS server who i wired. But when i try to setup my wired media server it will not connect.

View 6 Replies View Related

Linksys Wired Router :: BEFSX41 / Westell 6100G Modem - Setup And Configuration

Jan 10, 2012

I have the Linksys BEFSX41 wired Firewall router.  My ISP is Verizon DSL.  The DSL modem is a Westell 6100G.  I have the wall phone line connected to my modem.  The output of the modem is going to the input of my Linksys router.  I have two computers connected to the router outputs.  In order for me to see the output or configuration of my Westall modem, I have to go http://192.168.1.1.  In order for me to see the configuration of my Linksys router, I have to enter http://10.10.10.1.  When I look at the instructions for setting up and configuring my Linksys router, it never mentions the above 10.10.10.1 address, but instead it tells me to enter the 192.168.1.1 address.  I have never done this because when I powered both units for the first time, and it worked, I noticed then that my Linksys address was the 10.10.10.1.  Why is it then that none of the settings or instructions for the Linksys router never mention to enter the 10.10.10.1 address as oppose to the one the do call out to enter  which is the address for the Westell modem?  What would happen if both addresses on both devices were the same?

View 2 Replies View Related

Linksys Wireless Router :: WRT120N - Can't Accept Login Credentials When Login From IE10 Browser

May 9, 2013

 We have a Linksys WRT120N wireless router set up at one of our small offices. I noticed recently when trying to log in to the router to make some admin configurations that it will not accept the login credentials when trying to log in from IE10 browser. Works fine from Chrome, IE9, ect. logging in to a linksys router with IE10?

View 3 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Login Snmp Tracking?

Feb 27, 2012

Is it possible to track failed login attempts to ACS instances  (both on CLI and web GUI) by snmp? unfortunately i haven't found such option in Monitoring and Reports > Alarms > Thresholds >

View 2 Replies View Related

Cisco :: 3750 Sw Is Not Sending SSH Login Failure SNMP Trap

Nov 22, 2011

I want to make my switch send trap when failed SSH login is detected. I found the "login Enhancement" feature and enabled the trap and logging for the failed attempt.
 
3750# sh run | in login
aaa authentication login default local
login delay 1

[Code].....

View 7 Replies View Related

Unable To Login Into Router To Setup Wifi

Apr 2, 2012

I just moved and have a new laptop, Comcast came in to reset the cable and internet. A new router was given to us and I cannot seem to access the password. I reset the router and now where to go nest since I try using the IP address and it is not recognizing it. I am using an unsecured WIFI access and I am not comfortable doing so.

View 1 Replies View Related

Linksys Wireless Router :: E3200 - Cannot Access Setup Page Wireless Or Wired

Nov 7, 2011

I finally decided to go with a e3200 yesterday and picked up one at Walmart. Last night I went to hook it up and had no luck setting it up. Now I have able Internet with a phone VoIP service. After trying to connect several ways, all the router wants to do is sit with a flashing power light. I cannot access the setup page wireless or wired and have tried several methods I found last night.

View 1 Replies View Related

Linksys Wireless Router :: Disabling SSID Broadcast On RE1000?

Oct 25, 2011

I just set up a brand new LinksysE4200 router at one end of my home, and a Linksys RE1000 range expander at the other end in order to provide full WiFi coverage to my entire house.  Everything is working great except for one important detail.. There is currently no way to disable SSID broadcast on the RE1000 range expander! I just flashed it with the latest firmware (v1.0.01 build 2, Jul 22, 2011) , but I'm still unable to disable it, even though it is disabled on the E4200 from which it's receiving the signal it's rebroadcasting.  I am seriously considering returning the RE1000. Linksys. add the ability to disable SSID broadcast on the RE1000 in a (not too distant) future firmware upgrade! As far as I'm concerend, this is a MUST HAVE feature in order for this product to even be considered for use in any sensitive network environment.

View 2 Replies View Related

Linksys Wireless Router :: E4200 - VPN Is Disabling Internet Access

Sep 26, 2011

I have a Linksys E4200 router with firmware version 1.0.02. I am using a Macbook Pro. I can connect to a VPN server with the default VPN client software, but it kills my internet connection and disables connecting to SMB

View 5 Replies View Related

Linksys Wireless Router :: Disabling 5GHz Band On E3000

Jul 17, 2011

I've had the wireless G adapter for a year now, and connections work with both 2.4GHz and 5GHz G connections. I just bought a wireless N adapter (2.4GHz and 5GHz capable), and cannot get an N connection.. On 2.4GHz it connects to G only. And on 5GHz, I don't even see the whole band to connect to it.
 
I've tried disabling the 5GHz band on the E3000, then even setting the 2.4GHz band to no security. I still get a G only connection.My laptop can connect to 2.4GHz and get 144Mbps N speeds.Router is at latest firmware.I've researched this online, but can't find anything concrete.

View 7 Replies View Related

Linksys Wired Router :: RV042 / Setup A Vpn Gateway To Gateway

Apr 6, 2013

i am trying to setup a vpn Gateway To Gateway  when i setup the vpn i can ping  the 2 rv042 i cant see any computer in the network places when there comect we need to see the computer in the network places so are pos will run?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved