Setup Hw-550-3g Mac Filter?

Jan 12, 2011

I have hw-550-3G modem and I like to know how to setup Mac, IP filter.To allow only the Mac, address in the list using the internet.

View 3 Replies


ADVERTISEMENT

Mac Address Filter Setup With Note Field?

Oct 7, 2012

i need to add a lot of mac addresses in mac addr filter table. many routers do not allow me to add a note for each mac address. that makes management a bit difficult.

eg.

field 1, field 2, enable
xx:xx:xx:xx:xx:xx , peter pc, y
xx:xx:xx:xx:xx:xx, mary pc, n

View 2 Replies View Related

Can't Use Grep To Filter Out Everything Except Down Hosts

Aug 1, 2011

I am working on a Perl script to be ran on our different subnets to see what hosts are down (and make the assumption that if the host is down the IP address is free to be used). This is not being ran on a Linux system, so I can't use grep to filter out everything except down hosts. I know there are modules for Nmap that would make this task easier, but my plan is to install Nmap to our network monitoring server, compile the script for Windows, and have it create the report for what addresses are down. I don't want each person running the script to have to have all the modules installed, etc. Or can you compile the script with the modules in it?

View 6 Replies View Related

Bypassing An Internet Filter?

Jan 12, 2013

I work at a boarding high school at nights and as such I have a lot of free time. However the internet here is very restricted due to obvious concerns about children and unrestricted access. I have private internet at my room on campus but its too far away to connect to. I was wondering if it would be possible to setup my laptop/tablet to connect to my home computer and access the internet through them without restriction. And if so how would I go about doing that?

View 2 Replies View Related

Cisco :: ACS 5.2 - How To Filter By IP Address

Jan 31, 2013

Using ACS 5.2, under Network Resources>Network Devices and AAA Clients>, I can only filter by:

Name
NDG:Location
NDG:Device Type
Description
 
How can I find a device by its IP Address? or how can I enable this option?
 
On this link:[URL] I read the following: ''Network Device Filters—Based on the AAA client  that processes the request. A network device can be identified by its IP  address, by the device name that is defined in the network device  repository, or by the NDG'.....
 
How could I do this on my ACS server?

View 5 Replies View Related

Cisco :: Filter Type 5 Lsa From Area 0

Apr 16, 2012

[URL]

I'm at task 6

Am I wrong but the only way to filter external routes - type 5 - is with a stub area, and area 0 can't be a stub? As far as I know OSPF can't filter on the route tag, so should I be filtering with a route-map?

View 19 Replies View Related

Securing The Wireless Network With A Filter

Dec 7, 2011

In my building there are 2 wireless access points connected directly via switch into the router.So the problem is i dont want to set a password for the wireless but i want to be able to filter all computers that are connected wireless to my internet because many of them are mass-downloading torrents movies etc. and it slows the internet massively. What do i need to do to make it like a filter , which would be like a ISA server or something.

View 9 Replies View Related

Cisco :: What Is Required To Filter Sites

Sep 22, 2012

My main goal i want to filter certain sites including facebook not to be accessible within the network and block all torrets including maliciuos site. I was advised to get Cisco ASA 5505 which i already got a quote. But now i want to know if is the ASA 5505 good enough for this purpose, is there anything additional required to succesfully overcome my main goal?

View 5 Replies View Related

Did Mac Filter Wireless Adapters Address

Sep 17, 2011

Im using my upstairs neighbors wifi with permission. It has no protection whatsoever but recently i havent been able to use it anymore, and they both just went on vacation yesterday. Their dad was there for a day or two before they all left, my assumption is he thought i didnt have permission and did something to prevent me from connecting without mentioning it before they left.Its full bars (its directly above me) but the router almost instantly doesn't respond when i try to connect. Did he mac filter my wireless adapters adress? I tried changing my mac address on my wireless adapter (aka, desktop, as it doesn't have a nic) but Tmac cant change it successfully. Tmac is able to change my laptops mac though, but even after doing so i still cant connect to the network.

Other issue - right now im using a crappy 2 bar connection called ddrtvap on my laptop. The laptop sitting right where my wireless adapter for the desktop would be and it connects fine, but my desktop cant connect to this network (it connects to the network, but no internet) while the laptop does just fine. Windows repair is super usefull as it tells me something is wrong with my adapters settings but gives no clue as to what.

View 1 Replies View Related

D-Link DIR-825 :: How To Add More Mac Addresses To Network Filter

Jan 19, 2013

I have used all the spots on the form to filter mac addresses. Is there some way to add more? I have a lot of friends that come over from time to time. I also have plenty of my own wireless devices.I like using the mac address filter so not using it is not an option. Hopefully there is a way to add more, instead of being limited to a predetermined amount.

View 3 Replies View Related

D-Link DIR-655 :: Inbound Filter Not Working?

Aug 31, 2011

I am trying to block port scans originating in the Russian Federation, thousands per day.  I entered 77.88.26.0 as the Remote IP Start and 77.88.26.255 as the Remote IP End, setting the action to Deny.  It shows in the inbound filter rules list but my linux server still receives thousands of scans daily from an ip address in that IP netblock.   My DIR-655 is running hardware version A3 and firmware 1.34NA. 

View 8 Replies View Related

Cisco VPN :: 3030 - How To Filter Web Traffic

May 29, 2013

Most of our VPN connections are done with our Cisco 3030 and the internet goes out the ASA. We are able to filter all web traffic by doing a a span port for web traffic.
 
When we move VPN connections to the ASA we will loose the ability to span web traffic becuase its coming in and going out the same interface on the ASA. We will loose the ability to filter web traffic when this happens.
 
How we can filter web traffic on VPN connections on the ASA. We are using websense. I know there is some integration that can be done with the ASA and websense but it doesn't have all the capabilities as doing a span port for websense to monitor.

View 1 Replies View Related

Cisco Firewall :: ASA 8.4.4 Filter Url Using Hostname?

Aug 6, 2012

is there any way to apply hostname or object network in the syntax? The command gives the option to use hostname or A.B.C.D but doesn't accept the hostname PIX1(config)# filter url except 0.0.0.0 0.0.0.0 ?configure mode commands/options:  Hostname or A.B.C.D  The address of foreign/external host which is  destination for connections requiring filtering Can an FQDN be used as a foreign/external host?

View 3 Replies View Related

Cisco Firewall :: How To Filter L2L Traffic To A PIX 7.2(4) (or ASA)

Feb 6, 2013

I've got a PIX running 7.2(4) with its outside interface on the Internet.  The only thing this PIX is doing is acting as the endpoint for an IPSEC LAN-to-LAN tunnel with an Internet-connected ASA on another network.
 
I'd like to filter inbound Internet traffic to this PIX so that only the designated ASA can attempt to establish an IPSEC connection -- in other words, I want to prevent any other device on the Internet from even being able to attempt to establish an IPSEC connection to the PIX.  As far as I know (and have seen), this can't be done with an access-list on the outside interface, since that access-list doesn't apply to traffic to the PIX itself.

View 3 Replies View Related

Routers / Switches :: How To Change IP Filter Settings

Jul 5, 2011

For some port fowarding reasons I have to change my router setting to these:Maximum Ports: 4096TCP Timeout (in seconds): 600UCP Timeout (in seconds): 120I am using a Realtek router ( Family PCI-E Gigabit Ethernet <NDIS 6.20>)This is supposed to be EXTREMELY easy but I lack any general computer knowledge whatsoever. In laymen's term, I am N00B.

View 1 Replies View Related

Cisco :: Filter Unnecessary Vlans Going Through Trunk Between N5K And N7K

Jul 27, 2012

We have our aggregation layer here composed of two N7K with vPC between them. Every access switch is a N5K. Security policies state that we have to filter unnecessary vlans going through the trunk between N5K and N7K. So we use the 'switchport trunk allowed vlan 10,20,30' command. My question is: Do I have to include the native vlan id on this command?

View 10 Replies View Related

Speedstream 4200 - How To Make Modem Not Filter

Jul 25, 2012

I had windstreams modem "speedstream 4200" but parents for whatever reason thought the 4300 would change everything. With the 4200 I was open for gaming, could connect. With this 4300 I can't connect to anyone at all. I disabled DHCP server in my rotuer and that aving more fails than succeeds. (in connecting to people).My router doesn't have bridge mode but my modem does, I don't know what it does in the modem. My friend had the exact same problem I did and he put his router in bridge mode which I do not.

View 13 Replies View Related

Pace Dsl Gateway Model 4111n Filter?

Jan 27, 2012

I just replaced my 2Wire with PACE DSL Gateway Model 4111N. I am using the 2Wire filter in the phone jack to split the DSL and phone signals. Is there a different filter that will increase my signal strength?

View 3 Replies View Related

Software To Block / Filter Site Using Password?

Nov 5, 2011

I wonder if there is a program that filters and blocks any site through a passwordFor example, if I apply this filter for Twitter, the program would ask for a password for any user who tries to access it. And if the user forgets password, the program would deny access.

View 4 Replies View Related

Monitor URL Access Attempt Website Filter?

Jan 10, 2012

i need to block internet on all computers in our clinic except few websites (URL) that we need. I'm doing this on the router in WEBSITE filter in the manner of DISABLE ALL, except...

Specifically i have issues with using FAX client. ringcentral.com is ENABLED on the router, so anything within this DOMAIN will work (as forum.ringcentral.com etc.)

BUT when i attempt to send a fax, it falls into a black hole. although the client application shows - being sent, it wont go to SENT items and it just disappears. When i disable the website filter on router, it works.

there must be a different URL that the ring central call controlled tries to connect when sending. Receiving works no problem even with the website filter on. How do i detect / intercept what ULR / IP address is truing to be reached so i can enable it on the website filter ?

View 3 Replies View Related

D-Link DIR-655 :: Invalid MAC Address In Network Filter

Jul 4, 2012

I installed the 2.06NA on my DIR-655 router and now I'm having problems adding mac addresses to the network filter. The message is "Invalid MAC address". Of course, it doesn't tell me which entry is invalid and I have a number of them. After further checking.. I noticed that one of the MAC addresses is indeed invalid and when I remove it I still get the error message?

View 1 Replies View Related

D-Link DIR-825 :: Network Filter - Invalid Mac Address

Dec 29, 2009

I had no problem running both 2.4 and 5.0 Bandwidth. With WiFi password and without. It does it's job. The 2.4Ghz Range Plus works. I have set up the router on the 2nd floor at the highest it can go. And everyone get's full bars all over the house. I even get 4-5 bars outside in my car on my phone.

The only issue I have with this thing is a damn new netbook I got for Christmas with a Mac Address starting with 0C-EE-E6-XX-XX-XX. The Router finds the Mac Address invalid. In which I can come to understand cause seeing a Mac Address starting like that is completely new to me. Every Mac Address I have, started with 00 except the netbook. So now, I spent days trying to find firmware updates, patches, anything! I even attempted to spoof the Mac Address on the netbook but Microsoft has a bug on Windows 7. (I have the Starter Edition that came with the netbook)
 
Windows 7 Mac Spoofing works with WIRED Connection. But it does not work with WIRELESS Connection. I used 3rd Party Tools: SMAC and etc... I attempted Registry Edits, I changed even the value key to the "Orginal Mac Address" and it just wont change [New Strings/Network Address Edits included]. I have been banging my head about this for a week now. The Internets has many answers but they did not work. So Spoofing the Mac Address is out of the question. Until Microsoft fixes this bug.

Anyway: Did D-Link release any sort of beta update/driver/firmware or anything to resolve this at all? Is there a modded firmware to force the Router to take this stupid paradox of a Mac Address?

Currently: I have the Router's WiFi Password-ed with Default Factory Settings
{Hardware Version: B1
Firmware Version: 2.02NA}.

View 15 Replies View Related

Cisco Routers :: RV042 V3 Web Filter Feature?

Jan 10, 2012

We are currently installing RV-042 V3 Dual WAN VPN Routers for a Customer with an HQ Office & 3 Branch Offices. The Customer recently requested to use the WEB Filter feature available in the RV-042 V3 Router to do the followng : -  " Block all the HTTP Traffic Except for the company Website " We tried all the Combinations between " Access Rules " & " Content Filtering " available under the " Firewall "  but we always reach the result that either to Allow ALL HTTP Tarffic to All Websites or to Block ALL HTTP Traffic.
 
how to Block all HTTP Traffic except for certain URL ( Using the URL Name NOT the IP Address ).

View 3 Replies View Related

Cisco Firewall :: ASA 5520 With CSC SSM Filter Won't Work

Sep 30, 2012

We have Cisco ASA 5520 with csc ssm 10 (product ver. Trend Micro InterScan for Cisco CSC SSM 6.6.1125.0)in Web>Global settings> URL filtering > Rules > Communications and Search> Social Networking category is set to block during work time and allow during leisure time(see the attachement), but rule for this category won't work. I mean social networking sites are always remain allowed.

View 2 Replies View Related

Cisco VPN :: Filter Remote Access Traffic On PIX 501?

Mar 20, 2012

Is it possible to filter remote access VPN traffic on a PIX 501 (like you can on an ASA?)

View 1 Replies View Related

Cisco VPN :: ASA 5580 - Filter For Hairpin VPNs

Jul 2, 2012

We have a corporate site with a Cisco ASA 5580 (8.1), a remote office with a Cisco ASA 5510 (8.2) with a L2L VPN to corporate. A vendor has a L2L VPN to the corporate ASA with access to the remote office across the VPNs (hairpinning). The corporate office accesses an application at the vendor on port 23. Everything is working with regards to the vendor accessing resources to the remote office and the corporate office accessing the application at the vendor. Our goal now is to restrict the vendor to port 23 from the corporate network and port 9100 to the remote office. On the corporate ASA I setup a VPN filter and applied to the vendor's L2L vpn but when I apply the filter (see below) all traffic stops to the vendor such as telnet.

View 6 Replies View Related

Cisco Wireless :: AP 1200 - MAC Filter And WPA Autonomous AP

Jul 19, 2011

I have two wireless networks configured in the AP1200, both SSIDs are configured with WPA.

SSID 01: configured whit WPA
SSID 02: configured whit WPA
 
I have configured the access-list number 700, and I would like to apply to a single network. Achieving the following:

SSID 01 : WPA + Mac Filter, using the ACL number 700.
SSID 02:  WPA
 
How I can apply the list 700 to the first SSID only ??

View 5 Replies View Related

Cisco VPN :: VPN Filter Vs Interface ACLs On ASA 5525

Mar 19, 2013

I need some clarification on the differences between a VPN-Filter v an Interface filter.I am using an ipsec crypto tunnel between our site using ASA 5525 and a remote client who are using a Palo Alto Firewall.  I have applied a vpn-filter on the tunnel for these sites but I am being told that an interface filter would have been more simplier.

View 9 Replies View Related

Cisco :: AP 1260 Autonomous With WPA2-PSK And MAC Filter

Feb 28, 2013

I have two Cisco 1260 autonomous access point setup with WPA2-PSK. They are up and running. In that configuration it is Personal security since the security is only provided by the shared key. I'd like to add MAC filtering so in my open authentification I just scroll down to "with MAC filtering" and save. Doing that crash everything and switch to Enterprise security which need to have a Radius server (the shared key is not saved anymore and by using a device I now see 802.1x security).

View 1 Replies View Related

3560 - Filter / Security Appliance Recommendations?

Oct 16, 2012

I am looking for recommendations on a device to put at the forefront of our network, mainly for web content filtering. Our network is currently setup as this:We have two Internet providers. One for each network that are physically separate except a a Cisco 3560 which is used for failover. In the event one ISP goes down, one network can use the others ISP, however, it has no access to the other network beyond that switch.Currently, each network has a web content filter (SmartFilter) server which is going end of life in a year. We would like to replace each server with a single box at the front of the network for filtering. Other bonuses would be things such as bandwidth control, virus protection, etc.Perhaps the most important thing is to make sure our ISP bandwidth download speed does not get hampered by the device we choose to put at the front. We have 50mb download on one and 30mb on the other. If the device throttles the download at 10mb then it's useless to us.

View 9 Replies View Related

Cisco AAA/Identity/Nac :: Collection Filter In ISE Similar To ACS 5.3?

Aug 28, 2012

I wanted to ask if there is a collection filter in the ISE similar to ACS 5.3, where I can filter out unwanted syslogs.

View 2 Replies View Related

Cisco Application :: Configuring URL Filter In ACE4710

Jul 10, 2011

I have 2 ACE4710 in HA enviroment, they receive connection from Internet. What I need to configure is following:
The ACE have configured two URL, with the same port and VIP Address, for example:
 
URL-1: www.xxxxx.com
URL-2: www.xxxxx.com/Admin
VIP Address: 10.10.10.10
Port: 8443
 
All clients point to unique VIP and Port configured, I need to know if I can apply any filter or rule that allows me to distinguish when a customer goes to the URL1 or URL2.If any client try to access to URL-2, your traffic must be deny.In summary, from Internet I should be able to go only to URL-1.

View 3 Replies View Related

Cisco Firewall :: How To Filter By MAC Address With ASA 5510

Mar 3, 2013

I am using an ASA 5510 firewall in routed mode.How can I filter incoming traffic by mac address on the AS 5510 ? I have already setup a static access rule for rdp users on the outside to access a terminal server on the inside.Now, i would like to further limit access from specific computers only.

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved