Intermittent DSL Service Is Not Responding Well
Jan 4, 2012
I have had DSL service for several years from a small, local ISP, that pays Verizon for the use of their lines. On 1/2/2012 in mid-morning I began experiencing lack of connectivity. I noticed that the "link" light on my DSL modem was blinking. I tried turning everything off & starting up again but to no avail. In the morning, I turned everything on again & for about 45 minutes my DSL service was perfect. Then it became intermittent & mostly unavailable.
View 1 Replies
ADVERTISEMENT
May 16, 2011
When I create a service object or group and add the object to a new rule it never works.I mean the traffic match not the rule. I see not hits.I placed the rule on top of my access list to check if I do somethink wrong but it is not working. When I place only a service for example tcp/23 it is working.
my ip service object
object-group service g-as400 description access client 2 as400 machine service-object tcp-udp destination eq 397 service-object tcp destination eq 137 service-object tcp destination eq 2001 service-object tcp destination eq 3000 service-object tcp destination eq 445 service-object tcp destination range 446 447 service-object tcp destination eq 449 service-object tcp destination eq 5010 service-object tcp destination eq 5544 service-object tcp destination eq 5555 service-object tcp destination range 8470 8476 service-object tcp destination eq 8480 service-object tcp destination eq
[code]...
View 8 Replies
View Related
Feb 28, 2012
We have a situation where services are stopped on the real servers. The probes fail and we confirm the services are not running on the server. We cannot access the ports from the ACE directly. We can still however acces the VIP on the TCP port (L4 VIP class-map). So we can still telnet to the VIP on the port from thr Client side of the network.This is on ACE 20 Modules deployed in Routed mode. The version of software is A2(3.3).
Tried removing multi-match and loadbalance policies as well as class-map and re-applying then re-appyling the service policy to interface. Same behavior,This is a problem at another level as some services are being monitored by GSS via TCP keep-Alive and this obviuosly causes a problem as the service then never goes off-line.
View 10 Replies
View Related
Mar 25, 2013
I have a fresh installation of LMS 4.0 on windows server 2003, when i click to open topology i get error message : ANIServer service may be down or Host name isn't DNS resolvable
i tried pdshow -brief ANIServer ===> service UP
DNS is working using host file in driversetc i restarted the server
restared the crmdmgtd
unistall / install java plugin
pdterm ANIServer
pdexec ANIServer
NO change ..
View 6 Replies
View Related
Mar 11, 2011
I get cut off after about an hour online. I have cable internet and they have been out to check. I have a new modem from the company. They have put the modem on a separate wire but the problem continues.
View 1 Replies
View Related
Sep 10, 2011
I have reason to be suspicious as to the game's relevance. These spikes are characterized by no packet loss, as measured by pingplotter and winmtr (more specifically, there is packet loss, but I've come to understand that because it does not continue on to subsequent jumps it's not an issue), and latency leaping to between 250 and 600ms across multiple hops, seemingly without pattern or form, for intervals
Here are some summaries of some extended pingplotter sessions. The suspicion that this is not entirely WoW related is recent, so I'm working on seeing if I can get similar results from some other sources.
[code]...
View 1 Replies
View Related
Nov 11, 2012
I have intermittent internet access from a new laptop. When it works it is fast and consistent, but it seems there is a problem where I can sometimes start getting only part of an internet page, and then it stops downloading altogether.Below are ipconfig /all and ping tests and a screen shot of the device manager.A bit of background:1) There are 4 computers on the network, this laptop (samsung NP530) is the only one where internet is not working2) It is new, has avast installed as antivirus. Norton came with the laptop but I did not click on the button to activate it when it popped up on first opening3) A small strange thing: I get "SWMagent is restarting" message when I restart the computer. I don't know what this is.[CODE]
View 14 Replies
View Related
Sep 22, 2012
My internet speed should be 60Mbit, and this is what my old laptop was giving me. However, my new laptop seems to reach only 5MBit, before dropping to zero.This occurs on a cyclical basis every 10/20 seconds or so, and means that files are downloaded very slowly indeed. I have tried updating my wifi drivers, and this hasn't solved the problem.
View 1 Replies
View Related
Jan 12, 2012
We run windows server foundation 2008 and have about 15 workstations. I had been running the network on 10 workstations prior to moving the server to our new location about a month ago. All was working well. We had run with the 15 workstations no problem in our new facility for several weeks. many of the computers are dropping the network connection now intermittently, with no predictable pattern. I can't seem to reproduce the conditions that cause the drops.
View 1 Replies
View Related
Oct 10, 2011
My PC is connected to a network with my company. My PC, only my PC, seems to get random and quick drops in internet connection but the connection to the network/domain remains active.
1 - Open Internet Explorer
2 - Receive "Cannot Display Webpage" message.
3 - Refresh page quickly and the page shows up.
sometimes step 3 takes 3 or 4 times, seems to be getting worse as the problem has been around longer, but most of the time a quick refresh works. Same thing happens with Pandora, my standalone player for Pandora will lose connection but come back with a quick "RECONNECT" button.So, as you can see, it's only dropping out for seconds, 1 - 30 seconds at the most, my thouoght is the Ethernet card??
View 12 Replies
View Related
Jun 24, 2011
I have two computers, both of them running Windows 7. One of them has been experiencing an odd problem for about six months now, and now that school is out I have time to mess with it. When I try to do certain things, the download speed periodically drops to zero. Specifically, I've noticed it when using Firefox and Steam, but also for IE and a few other browsers I installed for the sake of testing. I know I'm not *losing* connectivity, because everything that isn't specifically downloading a file works fine. Skype calls work fine, Utorrent streams at a steady rate, but for some reason Steam and Firefox have speed graphs that look like the heart rate monitor of someone with a very weak pulse. It starts off strong, a nice solid 1 MB per second, and then after 10-30 seconds it'll slowly decline to 0, and sit there for anywhere from 10 seconds to half an hour before picking up to full speed again. I've tried reinstalling drivers, I've tried buying a new network card, I've tried running antivirus scans, and I've tried uninstalling my antiviruses. The only thing that works for sure is putting it into safe mode. In safe mode, the downloads proceed smoothly. I tried making a list of everything that ran in safe mode, and then rebooted into normal mode and closed each nonessential process and service, but that didn't work either.
View 7 Replies
View Related
Jan 12, 2011
Running 5 PC's and a laptop on a wired/wireless network at home. One PC running Win XP Pro started dropping the network connection (so it appeared) during browsing. Have found the following:
1. MSN messenger runs fine, and doesn't drop out
2. AVG antivirus updates with no issues
3. Web Pages in Chrome and IE will load fine one minute, then cannot load or pause for 1-2 minutes while loading
4. Can ping web addresses/IP addresses from command prompt with no issue.
5. Have changed the network connection from Ethernet to Wireless, which makes no difference to the issue.
6. If I "repair" the connection, and the network refreshes the IP address, I can browse successfully, for about a minute, before the issue occurs again. "Repair connection" again and can browse again for a minute.
7. Checking connected devices to the Netgear router, shows the PC name sometimes, against the IP address, other times it shows the PC as "unknown" against the PC address (when this occurs, web browsing is lost)
8. All other PC's on the network are fine.
View 6 Replies
View Related
Jan 26, 2012
When I play games that are downloaded to my PC from Aeria games I run into intermittent latency. It happens every 6 minutes and last for about 4 minutes so for every ten minutes I get to play about 6 minutes. It only happens with Aeria games; all of them.Is this an issue with my connection to the server or is it possible that it is due to security software?
View 13 Replies
View Related
Jul 23, 2011
Experiencing intermittent problem with access to home wifi for one PC (win 7) in the house (2 other PC's access internet OK via same wifi) Dell Studio one - details below - 50% of time will connect if we reset router or re-start PC or try again the next day.[CODE]
View 1 Replies
View Related
Dec 5, 2011
My laptop is connected to an Internet cable inside my apartment building for access to a free Internet service provided by the building management.The high speed cable service works okay for a few days but then after say 4 or 5 days it starts to slow down and then on the 6th or 7 day I can no longer connect using the cable. The technician in my building doesnt speak such good English and claims it is a software problem in Windows itself in my laptop ,but I don't know what would cause the software to trigger this condition?The last time the technician told me to go through some steps but I have to admit I have forgotten the very last ones in the " procedure " and how to complete the final steps of the procedure :-
He said to :-
1. Right click on the computer icon on the desktop
2. click on device manager
2. click on " network adapters " these are shown as being " Atheros AR8152/8158 PCI-E Fast Ethernet Controller ( NDIS 6.20 ) and secondly " Realtek RTL8188CE Wireless LAN 802.11 PCI-E NIC "
4. After that he told me to " refresh " the connection but I have forgotten how to do so?The wireless connection is working okay but I have noticed once this fault happens to the cable connection, the wireless connection doesn't work either until I unplug the cable. Then I can connect to the wireless Internet connection. But if I leave the cable in then neither the cable or the wireless works?
View 4 Replies
View Related
May 3, 2011
I've been trying to set up a customers security camera's for remote viewing. He has a HP running Vista, a netgear grt614 vs10 router, and a static IP address through Verizon. My problem is this. I set up port forwarding for port 80. All seems to work well sometimes and I can connect to his DVR no problem. Then other times I can't connect at all. I'll run a port checker and it will tell me port 80 is closed. Is it possible that Verizon will off and on block inbound port 80? I seem to only be able to connect during buisness hours. Is it possible that his PC needs to be on for the port to be open. The DVR is the server which is always on and the router is always on. I don't know why the computer would have to be on.
View 6 Replies
View Related
Apr 11, 2013
I recently moved and got a new internet provider. All the laptops connected get intermittent internet access but stay connected to the network which has excellent signal strength. what could be causing this ?
View 2 Replies
View Related
Apr 18, 2012
Im currently experiencing an intermittent connection on my office and we just upgraded from 4Mbps to 10Mbps. Latency is high when pinging commercial website like yahoo.com,it shoots up to 200sec. ISP router is connected to two HP Procurve Switch, then the workstation and servers. Already did a router/modem test and it failed, I advise our ISP to change the router but it were still experiencing the same problem. Network drop is also experience even after office hours, eventhough only few workstations are working.
View 1 Replies
View Related
Dec 2, 2012
I have build a new pc this week. All was fine offline. After connecting to the Internet initially everything loads quickly however sometimes after turning on my pc or restarting it the Internet just refuses to load. Pages take forever then I get a message unable to connect however the connection is still active and all my other devices work ipad etc. after a few times restarting or leaving it for a while all is fine.
View 1 Replies
View Related
Jan 24, 2013
I am using this wireless router for connection to internet:http:/[url]...The problem is that in most of the time the router works without a problem then suddenly without doing anything from my side the internet connection starts intermittent and then I can’t event connect to the router. This is a screenshot of pinging the router when the problem occurs.
View 4 Replies
View Related
Apr 12, 2011
I work in a small school and recently we started to have a problem with browsing the internet. We don't have an 'IT Department' as such as I'm the closest thing to it.When a browser is opened it will not connect to the homepage, or if it does its generally from cache, instead an error message about not being able to connect to server will appear. Now if you hit refresh you might or might not connect to the webpage in question but you can gurantee that it will take a long time to make that connection even on an undemanding site like wikipedia.The odd thing is that when connected to a speed checker it gives no surprising results, speed is normal. Also when downloading a file or the latest linux live distribution torrent I can achieve maximum speeds available to us.We use a selecction of Macs & PCs mostly connecting through ethernet cabling although connecting wirelessly is no different. We use BT 2Wire 2700HGV Business Hubs. I can't think of any changes our end that have happened to cause this and our internal network connections run just fine. I have tried pinging from the command line and it looks ok to my limited expertise, no lost packets.
View 3 Replies
View Related
Dec 2, 2012
I have a user that uses an ASA 5505 in NEM to have his/her laptop and Cisco IP Phone at home. The ASA 5505 establishes a tunnel to an ASA 5510, which is connected and speaking EIGRP to our core switch. Off of the core switch we have our CCM cluster.
The issue happens on the first call after a long period of no calls. After if happens on the first call, he/she can continue to make calls without the issue. I though it was a timeout issue, but his/her ASA configuration is the exact same. Also, he/she is using the same group policy, tunnel-group etc. as everyone else with the same setup.
This issue happens regardless if she has a PC behind the phone or not.Internal calls and external are both affected.
I am aware that most one-audio issues are RTP connectivity issues between the two endpoints. I can clearly see in the routing table of all of our routers, that the route to the subnet her phone is on has not changed for days, and she has had the issue within that amount of time.
I'm looking for a good place to start troubleshooting that doesn't require me to to a pcap. If all else fails, I will do a pcap.
View 2 Replies
View Related
Sep 9, 2011
I am running an 877W in the home that for the most part works fine, however after being connected for a variable amount of time I partially loose my DSL connection. Line sync stays up, but the traffic is lost.
A shut/no sut of the atm or dialer interfaces does not resolve the issue, only a reload or power down/up will fix the prob short term till it happens again.
Am currently running advipservicesk9-mz.151-3.T1, but have also rolled back to advipservicesk9-mz.124-24.T5 which has the same issue. Have tried a 857W with the same results. So ruling out IOS and hardware, its pointing to a config issue. It has also only been an issue since changing from ADSL1 to ADSL2+.
interface ATM0
no ip address
no shutdown
no atm ilmi-keepalive
exit
[code]....
I've tries some changes mentioned here and from other sites, but no success yet...
View 14 Replies
View Related
Oct 19, 2011
I have been having trouble with my DSL-2730B router. I am running a home network with a wired desktop connected via ethernet, two laptops, one desktop and three ipods connected wirelessly to the router.The problem is that at seemingly random times during the day the ability to connect to the internet is lost on all devices (wired or no). I also often lose the ability to connect to the router's homepage (settings) and upon inspection have found that when I ping the router I get time-outs (or sometimes destination host unreachable). This occurs on both wired and wireless at the same time and usually lasts anywhere from 10seconds to 10minutes at a time. I have reset the router numerous times including a reset via the web browser, unplugging the router and reconnecting and also have done a factory reset to attempt to solve the problem - all to no avail. As I am writing this I am using a different older router that so far (as of an hour) has not had the same issues.I should also mention that this happens regardless of which devices are currently on the network. I have had this problem with the wired-connection by itself and with my wireless laptop by itself.
View 4 Replies
View Related
Feb 24, 2012
Intermittent loss of connectivity in two level router network.Static ip address from DSL modem into WAN port of linksys wrt4g, LAN port to WAN port of dlink dir-615. All pcs, printers ans a NAS connected to the lan side of dir-615 using 16 port splitter box. Wifi set up on both routers. Router 1 is 'public' to the building, router 2 is private to the non profit org. Inermittent(1 or 2 times a week) loss of connectivity to the network and to internet.
View 18 Replies
View Related
Jul 17, 2012
I've been having a problem for a while now wherein my internet connection seems to randomly drop for anywhere from ten seconds to a minute, then come back online. It's been doing this over the lifespan of one router, and continued into the life of this new one I have, which is a WNDR3700v3 Netgear.
I called my ISP and they fiddled around with things on my computer, but the issue is still going on. Rather than slog through another three hours with them, does anyone here have any tips for what I might look into for the cause?
View 19 Replies
View Related
Jan 24, 2011
My advent 4211 has intermittent wireless connectivity.I have tried resetting the channel on the hub, but have had no luck thus far. Also I have updated the driver from Realtek, but the problem persits. I have also moved the hub to another location.The thing is that I have another Laptop which has no problem connecting.
View 1 Replies
View Related
Apr 4, 2011
I have a Belkin router (model to follow when back at work), which I've set up port forwarding, or virtual servers as it's called in the router admin. I also have a PPPoA login with static IP from BT which has been set up on the router.Essentially, if I was to visit the routers IP address in a browser, It should go via my router and through it's port 80 forwarding to the assigned IP which has a static IP rather than DHCP assigned IP within the network. The computer with this IP has a web server set up, and the holding page will be shown in the browser. This is how it should work.
Mine works exactly as it should as shown above... Some of the time. Generally though, connecting to the network externally doesn't work, and the port forwarding seems not to work. I've tried pinging the external IP and get connection time outs, which obviously is not ideal. When I reset the router it sometimes works as it should, but mainly doesn't. I have a few ports forwarded to a server computer, and when the web server cannot be contacted, neither can any of the other forwarded connections.
View 5 Replies
View Related
Jan 5, 2013
I was previously with sky and never faced any bother with my wireless broadband. Recently to my regret we moved broadband (amongst other utilities)to Utility Warehouse (UTW) who's broadband is through Telecom Plus. Anyway since joining with them I have had no end of bother with intermittent internet connection. Sometimes we get a stationary green broadband light then after a little while then we get a flashing green broadband light. We are constantly either pin resetting the router or switching it on and off at the rear, where it will work for a small amount of time then connection is lost again. The router that they have given us is a technicolor tg582n Pro. We have had two of these as originally we thought that the router could be faulty but obviously that is not the problem as even the second one is dropping our connection. We bought another filter incase that was the problem and even tried plugging router directly into phone box and still didnt work. Utility Warehouse have been about as much use as a chocolate teapot and we are so <unhappy> that we are paying for a service that does not work? They said that our cordless phones could be interfering with the signal? Is this maybe the case and the phones are running on same channel as router thus causing interference? We had these same phones when we with sky and they never caused interference with our broadband. I was going to try connecting my laptop via ethernet cable to router. Sometimes the landline crackles (since UTW installed a new landline & new tel number) so it could even be that? UTW will not send an enginneer out to check their line. we are at our wits end, about to cancel their broadband and go back to reliable sky.
View 8 Replies
View Related
Oct 1, 2010
I have 2 WAP4400Ns that were manufactured in July 2007. I've experienced some problems with dropped connections even with a strong signal over the years but recently, I've had long stretches where I cannot connect wirelessly to either unit. It works for a few hours then can't connect for half the day. I have no problem connecting to their admin pages over the LAN, just wirelessly. I look at the units and the power light is steady green while the Ethernet and wireless lights flicker rapidly. This looks no different when I can connect and when I can't. Connectivity doesn't depend on location; I can put my laptop right next to one of the units when they are malfunctioning and still can't connect. I tried changing the broadcast channel but it seems to have no effect. I rentered the WEP key that I have used for years and it doesn't have any effect. Settings are pretty much factory except for changing the IP address of one of them (so they can be in the same LAN) and customizing the SSIDs and security keys.
View 3 Replies
View Related
Oct 7, 2012
I have looked through the forum for answers to my problem, but does not look like I'll find it.The problem: Router randomly freezes.When this happens:No IP/DNS,No response to ping,No contact at all (wifi or cable),Works fine after reboot for some time.
View 2 Replies
View Related
Feb 1, 2013
i have the same laptop model "inspiron 15 3521". wifi used to work in a specific room, now it says "limited connectivity".
View 19 Replies
View Related
Oct 15, 2012
I have a Compaq with XP wired on a Network with a Belkin N600 Router.There are 5 computers on the Network, (4 wired, one wireless) and this is the only computer that I have problems with connectivity. It connects to the Belkin through 2 switches.Typically when I turn the system on it connects, downloads mail, etc. After a short period of time there is no connectivity to the network for printing nor the internet.I may get connectivity randomly again after a while, but you never know if or when you will get connectivity again for sure. I am using Explorer.I had loaded some Belkin software with no luck so I uninstalled it. The other computers have no special software for the router.
View 1 Replies
View Related
