My internet's falling out every half an hour, I'm having this problem for a long time and I'm getting really annoyed by it. It's always out for an average of 3 seconds. The reason this is annoying is because I'm a gamer and these dropouts cause me getting kicked for being unable to connect and such.
View 5 RepliesMy internet connction gets disconnected with in 1 hour . local area connection shows packets reciev and sent are in millions in 10 minuts . do i have a virus ?? or becouse of bytes sent and resived so much my internet gets disconnected. after disabling and reanabling my local area connection i can again use my net for some time.
View 1 Replies View RelatedNot sure if I have a defective router, but if I unplug it I then need to wait at least a half hour to plug it back in. Anytime sooner and it won't broadcast a SSID or connect to the modem. This is a huge inconvenience if you want to change router settings and then you need to restart.
View 1 Replies View RelatedMy ISP provides me internet by pppoe connection.When testing the connection with the router i get 30 mbps.When testing the conection without the router, cable conected to laptop i get 60 mpbs.
View 1 Replies View Relatedmy WAG160Nv2 drops the connection each day at the same hour (4:20pm to 4:40pm aprox.)I think that is because my ISP don't give me a static IP address and the connection must dropped once a day. in my old router I could put the time for the drop. I don't find something similar in the WAG160Nv2.
View 2 Replies View RelatedLately (after upgrading to 1.0.2.1 and 1.0.2.4) I have been seeing these particular errors in my syslog server:
10.0.0.1 01/02/11 17:54:47 08/24/11 12:54:58 kernel Warning rv220w "KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK"
10.0.0.1 01/02/11 17:54:47 08/24/11 12:54:58 kernel Warning rv220w "KERNEL [Kernel]
[Code].....
I know the problem lies in the timeout for the default inspection rules. I cannot find where to change this.I have nat statements for 1 to 1 nat to my polycom and tandberg video devices. I have set the firewall for the ouside to in rules to inspect all. This allows the devices to communicate with public addresses, but the video calls drop after 1 hour. How do I change the settings so this does not happen. I have tried setting the rule to allow instead of inspect, but when I do this, I have no access at all. I just want to nat 1 to 1 and allow all traffic to the nated devices. I know this is not secure but it is the only way to allow h323 through to let the video conferencing devices work.
View 1 Replies View Relatedhow can i solve this error:
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:45 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
[code]....
i have a wireless device and every 1 hours the connection drops and i must reboot the device
When enabling the WAN Traffic Meter on my RV180 with firmware 1.0.1.9, my download speed drops to half of my capacity.WAN Traffic Meter disabled: download around 13 MB/sec, WAN Traffic Meter enabled: max 6 MB/sec.WAN QoS is disabled!
View 1 Replies View RelatedMy internet stops approx in 10 min fo start of pc to an hour at times.Am not able to connect to router too.I have a wireless router and the PC is connected with a wire.The internet is not at fault as I can use the router @ laptop.Was on windows 7 Ultimate and all was working finer till 2 days ago. I thought May be I shoudl do a reinstall and installed my old and trusted win xp.Still its here. The win xp is completely updated and up to mark. I cannot even connect to the router 192 address when the internet stops.I have already changed dns to open dns. I remember that in windows 7 it used to show some dns /ip error , when I woudl trouble shoot at times and thus using open dns on router. Nothing working, and am going mad[CODE]
View 14 Replies View RelatedI've noticed this in the last few days, but my internet seems to crash at the exact same time (29 past the hour) every hour. We've recently had a new modem in, and was working fine. I recently had a mass clearout of a lot of things in my PC (got rid of 500 gigs), so I'm wondering whether I may have deleted something which has caused this.
View 4 Replies View Relatedmy internet cuts out every hour or so for 5-7 minutes. i have a linksys router and a Motorola modem. i am connected through the router into my modem. It is very annoying cause in the middle of playing my video games, i loose connection and i loose a bunch of stuff.
View 14 Replies View RelatedI just upgraded from RV-042 to RV-042G on 24.Dec.
My previous connections are : (1st) 100Mbps ISP connection, (2nd) 200Mbps ISP connection (fibre to home)
Before upgrade, my RV-042 worked very stable.
After using Migration Tools by exporting RV-042 current config and converted to V3 configuration, the converted configuration was imported to RV-042G.
In beginning, RV-042G woks fine after imported converted configuration file. Unfortunately, after around 1 hour of use, my iPad (through an Apple Airport Extreme Station) and wired PC could not browse internet.
But, port-forward to 3 IP-cam still be able to access by my iPhon4 through Carrier 3G connections.
After a reboot of RV-042G, internet connection comes back. But, after an hour of use, the same issue happened again.
RV-042G makes me fluctuated. I will fallback to RV-042 from now on and wait for any further firmware improvement from Cisco/Linksys.
My previous RV-042 and current RV-042G config:-
* WAN1 : 100Mbps ISP connection
* WAN2 : 1Gbips ISP connection ( 200Mbps max throughput)
* LAN1 : connected to Apple Airport Extreme
* LAN2 : connected to Linksys 16-port FastEthernet switch
* LAN3 : idle
* LAN4 : connected to an Intel i7 PC
* Dual WAN link mode with bandwidth management, all internet connection from PC will stick on WAN2
A few days ago I sent my ISP an email and a few days later they called my house and talked to my mom about the support issues I had addressed with slow speeds. They directed her to www.att.com/speedtest and our internet speed was reading 6MB/s down and 512kb/upload as it should be.The problem is, outside that test I am not seeing the performance. Let me put it to you like this, right now the internet is so slow that Speedtest.net consistently gets errors when trying to connect for a test. Any website that isnt text based like say Reddit, takes ages to load. Youtube videos? Streams? Forget about those, 240p buffers as slow as 720p.When I finally manage to get Speedtest.net to do a test after numerous internet resets I barely crack 1MB/s down IF AT ALL, and .12kb/s upload IF AT ALL.
Its maddening. Its actually affecting my siblings college work as their online tests have been failed due to disconnecting.Something I should have mentioned earlier is that I do have a router. Its a Linksys WRT54GS with the latest firmware. Something that is also annoying is that when I plug my internet directly into my computer, it wont work, but if its plugged through the router it works just fine. This has never happened and its making me draw a blank.AT&T support suggested the we upgrade our Modem to one of the newer ones that are a modem/wireless router combo which we plan on doing. Right now we have a Speed stream 4100 that weve had since we got the internet in 2006 and I guess they don't even make them anymore.
I have a problem with an internet connection with a customer.They have a Zyxel 660 in bridge mode and the public ip is delivered to the eth0/0 outside interface of a 5505 ASA.They lose internet connectivity a couple of times per hour. What solves the problem immediately is disconnecting the ethernet cable from the eth0/0 and then directly plugging it back. Then it runs for 20-30 minutes or so.The isp doesnt't notice any errors on the dsl connection, only that they cannot ping the outside interface from time to time (duhhh)However, yesterday, when problem appeared for first time , I noticed that this Zyxel was very hot since it was placed on top of the ASA. Now it is set apart.In the meantime I already replaced all cables, but I think it's the Zyxel so I urged that the ISP send a new Zyxel.Though it sounds strange. [code]
View 4 Replies View RelatedMy computer is currently wired to the internet, but I'd like to make it wireless. I already have a wireless router and PCI card. The problem is that the wireless internet cuts my speed in half. Is there a reason for this? Is wireless inherently slower?
View 4 Replies View RelatedI have a shop about half mile away from my wireless network at my house. I need/want wirless internet in my shop. I have a egenious ap/bridge model EOC2611P that is linked to my home network at my shop to my house. I have internet through the cat5 cable coming out of the bridge but having issues connecting that to the other wirless router. The second router is a linksys e1000. I live out in bfe so no network security seince my closest neighbor is a little over a mile away. I have dissabled DCHP on the linksys and thats where my knowledge stops. I know it can be done but how?
View 5 Replies View RelatedSo its the 3rd day of my nightmare to set up this cisco ADSL router...
Status:
Setup:
DSL connection:
So I live in Ireland and im on Smart telecom ISP, Basicly the internet is half going - like skype is going and i can chat with my contacts, cisco.com page is going but really SLOW, google.com page is going until search, speedtest.net page is going until the mesure thing facebook loads like in 10min.. a lot of pages dosent even go...From main telephone socket to the router is only 2.5m telephone cable(NO HOME PHONE) so no splitter or extension... (Changing the MTU dosent change anything...only if i set it on auto then w7 shows that internet is connected, skype works but no pages at all is loading and is dropping with timeout error.. if i set to manual then something loads on pages...) The cisco connect software does NOT do good because I can go until the username/pasword step, I input THE CORRECT details but he just sayes that he cant authenticate the username & pasw... and so i cant get past that step and the programm is no good.... only way is to set up with 192.168.1.1!
I am only getting half of what my internet speed should be when I am connected to the router.
when i connect to the modem directly from my pc, I have 50-60 down..
i am having a very wierd problem with my current internet connection , Its wired and while accessing websites seems just fine .. Accessing ANY program on the PC that requires internet does not work .. Examples of those can be steam/origin/any messenger/skype/teamviewer/teamspeak and the list goes on.. They all act like i dont even have an internet connection. I tried pinging in CMD by using Ping Google and i always get a request timed out .. I have also tried tracert Google and after the three * * * Its always a request timed out as well.. I have no idea whats causing and its pretty annoying as i mainly use the internet for skype and steam, Also on a side not this is not a problem with my laptop as i tried connecting to some random unprotected network that was near me and it worked fine
View 5 Replies View RelatedMy wireless router only supplies half the house with consistent Internet access. What's the easiest way to ensure connectivity throughout the house?
View 1 Replies View RelatedI have a modem and connected to the modem is my wifi box. I have 9 computers using the wifiWhat happens is the internet connection just drops for ALL the computers at the same time even though ALL the computers signal strength is excellentI have to reset the wifi box and then all the computers are back onlineThis can happen 2 or 3 times an hour or sometimes I can go 2 hours or so
View 1 Replies View Relatedi already tried resetting my ip but im still loosing connection every 1 hour :(
View 4 Replies View RelatedMy Dir-655 sometimes seems to forget it is now DST. Just now the routers time was 8:07 but the real clock time was 9:07. This is the 3rd time this has happened and when it does it messes up access controls. If it can't keep the right time the access controls for me are useless. Clicking save settings gets the time set back to what it should be. How can I stop this nonsense.
View 11 Replies View Relatedwe noticed that every six hours, our all servers in a VLAN disconnects/disappears from the network for a time of 10-20 secs and it comes online immediately. It impacts the performance of the application for a moment.
We use CISCO router com Switch and Checkpoint firewall to access those servers. The issue is not every six hour, it is every sixth hour from its previous instance. Eg) if it 9 am in the morning then it happens somewhere around 3:01 pm in the afternoon and again 9:02 pm in the night.
There is no DHCP allocation or server in our environment. All ip address used are static.
specially, what could be set to action every six hour ?
Have a problem with Wi-Fi, and going to work on this computer over the weekend. So before I get my hands on it, hoping to get some suggestions on how to get it done. The time for a fix will be limited. Wi-Fi always disconnects after about 1 hour of connection to a Wi-Fi hotspot under Windows 7 via Bootcamp.These Wi-Fi drops happen in every hotspot (fast food, hotel, other free Wi-Fi) so far.Works without drops when connected to same Wi-Fi hotspots in Mac OSX 10.x.Even works in Windows 7 when using own, separate Verizon 4G mobile hotspot, model MIFI 4510L. But again not when connected to the hotel hotspots/routers.Loses Wi-Fi connection after about an hour when on regular Wi-Fi (via router/hotspot). Happens on different Wi-Fi networks in different places -- same problem.Checked online and saw lots of people having Wi-Fi disconnection problems in Windows 7 on Mac Books (Pro and Air). Also saw people having lots of disconnection problems with just Windows 7 (without a Mac).
What makes Verizon 4G hotspot so different from other hotspots? Is it protocols? Different encryption? Something else?Obviously I can't change the settings on the routers (as they are the establishment's and are different in every place). I can only change something locally on the laptop itself.I have very limited amount of time to apply any fixes I can think of. About 1 hour; 1 and a half max. I know that it's not best for trying to troubleshoot it, but that's all I have this week to work on it. In a few weeks I might have more time to spend with it. Laptop may have Hide My Ass Pro VPN proxy installed. Can't verify at the moment. OSX has it for sure. Windows side -- not positive. But switching it off will be the first thing I'll try. What steps to try to undertake and in which order. Any way to monitor the connection live and see what caused the disconnect? Say a live or recorded log of network card and router communication? Reinstall drivers? Any better drivers available for it? The Wireless card is called Airport officially. But if remember correctly it is: Broadcom BCM43xx.
My DSC-930L's web interface becomes unresponsive about an hour or two after power cycling my camera. It still responds to pings, and it still sends images to FTP when it detects motion, but I can't log into it via web interface, mydlink, or the iphone app. Power cycling the camera fixes the problem for an hour or so but then its right back to not working again.
View 8 Replies View RelatedI have the DIR-655 rev B1 with 2.03NA firmware. After 7 days the system time falls back an hour. The timezone settings are correct and I have used both 0.us.pool.ntp.org and DLink's time servers.
View 6 Replies View RelatedMy computer is on a direct connection with a docsis 3 modem - with service provided by Comcast. I had no problems with the internet for about a month after signing up with Comcast at 6Mbps. Then out of no where the internet began to drop out whenever in use. When the computer is connected to the internet, and I am not actually using "bandwidth" the connection stays connected, all day with no blips. But when I try to access Youtube or some other site they demands bandwidth it drops out. Comcast has sent out 7-8 Techs to troubleshoot the issue to no avail. They have replaced the modem 3 times, the ethernet cable (is that the right word?) has been replaced, and Comcast cut holes into my walls to re-wire the entire building. I just had a guy leave from Comcast, and when he hooked up his laptop to this modem he had absolutely no problem. Then he hooked up a router, and we both used direct connect to get on the internet, and as long as his computer was connected the signal was strong with no blips. We removed his computer and the connection dropped within a few minutes. Comcast says they have verified the integrity of all their equipment, cables, splitters, main line, ect...I even tried backing up my machine and reformatting it and I still have the same issue. I've always been good about not getting virus or spyware. I have no idea why only my PC won't stay connected to the internet. Oh, also the Comcast tech hooked up a meter to the cable line and he says when the internet drops out on my end that the cable signal is still strong with no blips. When the modem goes out all the lights drop out and it has to re-identify, then it comes back up for a few minutes, only to spiral down and disconnect.
I live in an apartment, and I have a usb adapter that allows me to get on the internet wirelessly. The apartment I am at has a club house that offers free internet to people here who don't have it. If I plug in my adapter I can get a signal from the club house's wireless, and I can connect to that, and I have no problems at all on the apartments club house internet, only on my direct connect form my Comcast modem..
Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : BSNL India
I bought this device yesterday, I am using this device with BSNL's EVDO (cdma network).It detects my modem fine, and it connects fine, and I can browse.Exactly at 50th min(few seconds difference), my net gets disconnected.I have tried all modes, connect manually, automatically, on demand -- nothing solves the concern.Changed idle timeout to 0.The device when connected directly works fine for more than 12 hours.Updated firmware to the latest 3.14.2 Build 120817 Rel.55520n.Tried Resetting the Router to factory defaults and configured again.Tried all troubleshooting steps from FAQ as in change it to WEP security, connect manually, idle timeout setting.Most importantly, tried creating a BIN file using USB sniffer and used it, even then its the same issue.
I have just configured a new RV016. Everything works well for about an hour then it shuts off. Cycling the power will cause the system led to light breifly, but then it shuts off again. After 15 minutes unplugged, I am able to restart it and it will run fine for about an hour.
View 2 Replies View RelatedWe have two PIX515E ( 6.3), one is Primary( Active) and second one is Standby. after configuration of Secondary Firewall as Standby. getting problem.
1. Configuration part everything is fine
2.we have done failover text also .
Aster Some time , we are not able see Standby Firewall its going down .
I have a client that I recently replaced their GSS's for and last evening I cut them over to an HA pair of ACE 4700's. After about an hour, it looks like the GSS and ACE stopped communicating with each other. When this happened, they switched back over to the old CSS appliances and everything came back up fine. Apparently this happened the last time they tried to cutover to the ACE and they contacted TAC. TAC told them the issue happened because the GSS's they were running at the time were EOL. So now, with brand new GSS's, they are experiencing the same issue.
As of now, the ACE's are offline and I cannot get into them to see what the issue may be. We tested the sites out last night after the cutover and everything seemed fine. There was one minor problem that I resolved quickly, but that was it and then we left. The client started getting emails about an hour later about their main website being down. They do have the ACE logging to a syslog server, so we will look at that to see if there is anything relavent. I suggested that we bring up a test site to use through the GSS/ACE and see what happens. They have another CSS that they can run their sites through, so this option will work without taking down all of their other sites.