Invalid Ip Configuration Every 1 Hour?
Mar 1, 2011i already tried resetting my ip but im still loosing connection every 1 hour :(
View 4 Replies
ADVERTISEMENT
Invalid Network Configuration?
Apr 7, 2011i am getting the message invalid network configuration why does this come
View 3 Replies View RelatedWireless Network Connection With Invalid IP Configuration
Sep 1, 2012Sometimes the router has too many devices connected to it and the other people living with me don't understand this so they keep their iPhones, iPads, laptops, et cetera connected via WiFi even though I tell them to turn off the WiFi setting when they're not using it. So it kicks me off constantly, not sure why, but I don't mind too much. Basically when I'm "connected" but not really connected I remotely reset the router so I don't have to walk upstairs all the time.
I've reset it without troubles before. But did it tonight and now it's completely screwed up. I run a windows diagnostics test and it comes up with: "Wireless network connection doesn't have a valid IP configuration."
[URL] Here's my ipconfig /all
Code: Microsoft Windows [Version 6.1.7600]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code]....
Cisco Security :: NAC 4.8.1 Invalid Switch Configuration-OOB Error
May 18, 2011i just deployed Cisco NAC version 4.8.1 Virtual Gateway OOB on a LAN envieronment and on a WLAN envieronment, it works fine for some users , they can authenticate via the agent or web page, and then they are redirected to the access vlan, But for some other users in LAN and WLAN , when they try to authenticate via agent or web page the following error appears:
Invalid switch configuration-OOB Error:OOB client "mac/ip" not found.
I tried to find some pattern for the users but it dont match any pattern.
Cisco AAA/Identity/Nac :: NAC 4.9 Invalid Switch Configuration OOB Error
Dec 10, 2012I am having the Cisco NAC enviroment (Software Version is 4.9.1) and OOB VG.
We are getting the below and attached Error while deploying on some machines.
"Invalid switch configuration-OOB Error:OOB client "mac/ip" not found."
Some users on same switches are working fine but some are not....
What would be the possibilities and any work around? other than keeping the port shudown for long time means that atleast 10 - 20 secs or more or a PC restart. Customer is not feeling comfortable with the current situation.
Can't Connected To Wireless Or With DSL - Get An Error Message Saying Invalid Ip Adress Configuration?
Jan 19, 2011computer was working fine a few days ago, all of the sudden not able to get online anymore at all,recieve error message 651 with dsl connection, and when trying to connect to wireless get an error message saying invalid ip adress configuration,
ipconfig/all reveals:
C:Usersygydfre>ipconfig/all
Windows IP Configuration
Host Name . . . . . . . . . . . . : bygydfre-PC[code]......
Acer Aspire - Local Area Connection Invalid Ip Configuration?
Aug 11, 2012I have 2 laptops- both Acer Aspire. I'm trying to share a wireless internet connection on laptop #1 with laptop #2 via a crossover cable. Internet sharing is turned on with laptop#1. both laptops are set to obtain ip automatically. Laptop #2 will connect to #1 with the cable, but the connection shows "Unidentified network No Internet Access. Diagnostics reports "Local area connection invalid ip config. "
View 2 Replies View RelatedAcer Aspire One 722 Notebook - Wireless Network Connection With Invalid IP Configuration
Aug 20, 2012I bought a brand new acer aspire one 722 notebook and it works fine except I can't connect to the internet. After I run the diagnostics I get the following problem detected: "Wireless network connection doesn't have a valid ip configuration."
View 5 Replies View RelatedTP-Link 3G/3.75G Router :: TL-MR3420 - Unable To Open Configuration / Invalid Password
Jan 27, 2013Region : Others
Model : TL-MR3420
Hardware Version : V2
Firmware Version : 2.1
ISP : PTCL
trying to connect to router configuration (after several factory resets) at 192.168.0.1 but each time screen displays invalid username / password,doesnot even display username / password window,using admin as username and password,just cannot log on to configuration setup
Cisco Security :: 3310 - NAC Profiler - NetWatch Invalid Configuration File
Jul 18, 2010I'm trying to configure the NAC Profiler with a 3310 CAS Collector. In the "Edit Collector" menú, it shows all the modules as "Running", except for the NetWatch module which shows a state "Invalid configuration file (missingInternalAddress)".
I configured the eth3 interface of the CAS as a monitor interface in the Profiler (see attached image), and I tested that the SPANed traffic actually reaches that interface from the access switch. I'm using software version 3.1.0_24 in both the Profiler and the Collector.
Internet Drops Off After One Hour
May 24, 2011My internet connction gets disconnected with in 1 hour . local area connection shows packets reciev and sent are in millions in 10 minuts . do i have a virus ?? or becouse of bytes sent and resived so much my internet gets disconnected. after disabling and reanabling my local area connection i can again use my net for some time.
View 1 Replies View RelatedHave To Reset Wifi Box Every Hour?
Apr 12, 2011I have a modem and connected to the modem is my wifi box. I have 9 computers using the wifiWhat happens is the internet connection just drops for ALL the computers at the same time even though ALL the computers signal strength is excellentI have to reset the wifi box and then all the computers are back onlineThis can happen 2 or 3 times an hour or sometimes I can go 2 hours or so
View 1 Replies View RelatedInternet Stops After 10 Mins To An Hour?
Sep 16, 2011My internet stops approx in 10 min fo start of pc to an hour at times.Am not able to connect to router too.I have a wireless router and the PC is connected with a wire.The internet is not at fault as I can use the router @ laptop.Was on windows 7 Ultimate and all was working finer till 2 days ago. I thought May be I shoudl do a reinstall and installed my old and trusted win xp.Still its here. The win xp is completely updated and up to mark. I cannot even connect to the router 192 address when the internet stops.I have already changed dns to open dns. I remember that in windows 7 it used to show some dns /ip error , when I woudl trouble shoot at times and thus using open dns on router. Nothing working, and am going mad[CODE]
View 14 Replies View RelatedInternet Drops Out Every Half An Hour?
Sep 7, 2011My internet's falling out every half an hour, I'm having this problem for a long time and I'm getting really annoyed by it. It's always out for an average of 3 seconds. The reason this is annoying is because I'm a gamer and these dropouts cause me getting kicked for being unable to connect and such.
View 5 Replies View RelatedD-Link DIR-655 :: Loses 1 Hour And Forgets DST
Jun 19, 2011My Dir-655 sometimes seems to forget it is now DST. Just now the routers time was 8:07 but the real clock time was 9:07. This is the 3rd time this has happened and when it does it messes up access controls. If it can't keep the right time the access controls for me are useless. Clicking save settings gets the time set back to what it should be. How can I stop this nonsense.
View 11 Replies View RelatedAll Servers Under VLAN Disconnects Every Sixth Hour?
Aug 2, 2012we noticed that every six hours, our all servers in a VLAN disconnects/disappears from the network for a time of 10-20 secs and it comes online immediately. It impacts the performance of the application for a moment.
We use CISCO router com Switch and Checkpoint firewall to access those servers. The issue is not every six hour, it is every sixth hour from its previous instance. Eg) if it 9 am in the morning then it happens somewhere around 3:01 pm in the afternoon and again 9:02 pm in the night.
There is no DHCP allocation or server in our environment. All ip address used are static.
specially, what could be set to action every six hour ?
Internet Crashes For A Few Seconds At The Same Time Every Hour?
Nov 5, 2011I've noticed this in the last few days, but my internet seems to crash at the exact same time (29 past the hour) every hour. We've recently had a new modem in, and was working fine. I recently had a mass clearout of a lot of things in my PC (got rid of 500 gigs), so I'm wondering whether I may have deleted something which has caused this.
View 4 Replies View RelatedWifi Always Disconnects After 1 Hour Of Connection To Hotspot
Mar 1, 2013Have a problem with Wi-Fi, and going to work on this computer over the weekend. So before I get my hands on it, hoping to get some suggestions on how to get it done. The time for a fix will be limited. Wi-Fi always disconnects after about 1 hour of connection to a Wi-Fi hotspot under Windows 7 via Bootcamp.These Wi-Fi drops happen in every hotspot (fast food, hotel, other free Wi-Fi) so far.Works without drops when connected to same Wi-Fi hotspots in Mac OSX 10.x.Even works in Windows 7 when using own, separate Verizon 4G mobile hotspot, model MIFI 4510L. But again not when connected to the hotel hotspots/routers.Loses Wi-Fi connection after about an hour when on regular Wi-Fi (via router/hotspot). Happens on different Wi-Fi networks in different places -- same problem.Checked online and saw lots of people having Wi-Fi disconnection problems in Windows 7 on Mac Books (Pro and Air). Also saw people having lots of disconnection problems with just Windows 7 (without a Mac).
What makes Verizon 4G hotspot so different from other hotspots? Is it protocols? Different encryption? Something else?Obviously I can't change the settings on the routers (as they are the establishment's and are different in every place). I can only change something locally on the laptop itself.I have very limited amount of time to apply any fixes I can think of. About 1 hour; 1 and a half max. I know that it's not best for trying to troubleshoot it, but that's all I have this week to work on it. In a few weeks I might have more time to spend with it. Laptop may have Hide My Ass Pro VPN proxy installed. Can't verify at the moment. OSX has it for sure. Windows side -- not positive. But switching it off will be the first thing I'll try. What steps to try to undertake and in which order. Any way to monitor the connection live and see what caused the disconnect? Say a live or recorded log of network card and router communication? Reinstall drivers? Any better drivers available for it? The Wireless card is called Airport officially. But if remember correctly it is: Broadcom BCM43xx.
D-Link DCS-930L :: Web Interface Unresponsive After An Hour Or Two
Feb 1, 2011My DSC-930L's web interface becomes unresponsive about an hour or two after power cycling my camera. It still responds to pings, and it still sends images to FTP when it detects motion, but I can't log into it via web interface, mydlink, or the iphone app. Power cycling the camera fixes the problem for an hour or so but then its right back to not working again.
View 8 Replies View RelatedD-Link DIR-655 :: System Time Becomes An Hour Off After 7 Days
Oct 30, 2011I have the DIR-655 rev B1 with 2.03NA firmware. After 7 days the system time falls back an hour. The timezone settings are correct and I have used both 0.us.pool.ntp.org and DLink's time servers.
View 6 Replies View RelatedBroadband :: Linksys Router / Why Does Internet Cut Out Every Hour Or So For 5-7 Minutes
Mar 9, 2011my internet cuts out every hour or so for 5-7 minutes. i have a linksys router and a Motorola modem. i am connected through the router into my modem. It is very annoying cause in the middle of playing my video games, i loose connection and i loose a bunch of stuff.
View 14 Replies View RelatedLinksys Cable / DSL :: WAG160Nv2 Drops Connection Each Day At Same Hour?
Jun 8, 2012my WAG160Nv2 drops the connection each day at the same hour (4:20pm to 4:40pm aprox.)I think that is because my ISP don't give me a static IP address and the connection must dropped once a day. in my old router I could put the time for the drop. I don't find something similar in the WAG160Nv2.
View 2 Replies View RelatedTP-Link 3G/3.75G Router :: MR3020 Unplugs USB Modem Every 1 Hour
Nov 13, 2012Region : India
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : BSNL India
I bought this device yesterday, I am using this device with BSNL's EVDO (cdma network).It detects my modem fine, and it connects fine, and I can browse.Exactly at 50th min(few seconds difference), my net gets disconnected.I have tried all modes, connect manually, automatically, on demand -- nothing solves the concern.Changed idle timeout to 0.The device when connected directly works fine for more than 12 hours.Updated firmware to the latest 3.14.2 Build 120817 Rel.55520n.Tried Resetting the Router to factory defaults and configured again.Tried all troubleshooting steps from FAQ as in change it to WEP security, connect manually, idle timeout setting.Most importantly, tried creating a BIN file using USB sniffer and used it, even then its the same issue.
Cisco Routers :: RV016 Shuts Off After Running For An Hour
Feb 21, 2013I have just configured a new RV016. Everything works well for about an hour then it shuts off. Cycling the power will cause the system led to light breifly, but then it shuts off again. After 15 minutes unplugged, I am able to restart it and it will run fine for about an hour.
View 2 Replies View RelatedCisco Firewall :: Standby PIX515E Not Working After 1 Hour?
Jun 28, 2012We have two PIX515E ( 6.3), one is Primary( Active) and second one is Standby. after configuration of Secondary Firewall as Standby. getting problem.
1. Configuration part everything is fine
2.we have done failover text also .
Aster Some time , we are not able see Standby Firewall its going down .
Cisco Application :: 4700 GSS And ACE Stop Communicating After An Hour
Aug 20, 2012I have a client that I recently replaced their GSS's for and last evening I cut them over to an HA pair of ACE 4700's. After about an hour, it looks like the GSS and ACE stopped communicating with each other. When this happened, they switched back over to the old CSS appliances and everything came back up fine. Apparently this happened the last time they tried to cutover to the ACE and they contacted TAC. TAC told them the issue happened because the GSS's they were running at the time were EOL. So now, with brand new GSS's, they are experiencing the same issue.
As of now, the ACE's are offline and I cannot get into them to see what the issue may be. We tested the sites out last night after the cutover and everything seemed fine. There was one minor problem that I resolved quickly, but that was it and then we left. The client started getting emails about an hour later about their main website being down. They do have the ACE logging to a syslog server, so we will look at that to see if there is anything relavent. I suggested that we bring up a test site to use through the GSS/ACE and see what happens. They have another CSS that they can run their sites through, so this option will work without taking down all of their other sites.
Cisco Routers :: RV220W WAN Connection Drops Every Hour
Aug 24, 2011Lately (after upgrading to 1.0.2.1 and 1.0.2.4) I have been seeing these particular errors in my syslog server:
10.0.0.1 01/02/11 17:54:47 08/24/11 12:54:58 kernel Warning rv220w "KERNEL [Kernel] ERROR:endChantRecv: protocol PNAC returned !OK"
10.0.0.1 01/02/11 17:54:47 08/24/11 12:54:58 kernel Warning rv220w "KERNEL [Kernel]
[Code].....
Cisco 871 WAN - Router Drops H323 Calls After 1 Hour
Jun 20, 2011I know the problem lies in the timeout for the default inspection rules. I cannot find where to change this.I have nat statements for 1 to 1 nat to my polycom and tandberg video devices. I have set the firewall for the ouside to in rules to inspect all. This allows the devices to communicate with public addresses, but the video calls drop after 1 hour. How do I change the settings so this does not happen. I have tried setting the rule to allow instead of inspect, but when I do this, I have no access at all. I just want to nat 1 to 1 and allow all traffic to the nated devices. I know this is not secure but it is the only way to allow h323 through to let the video conferencing devices work.
View 1 Replies View RelatedLinksys Wireless Router :: WRT54GH Disconnects About 10-12 Times Per Hour
Nov 20, 2010I just bought WRT54GH router. I have one PC (running Ubuntu) connected via Wireless.Every 5-10 minutes I get disconnected for a short period of time (about 10-30 seconds). During that period I am able to access router configuration page, but can't connect to the "outer" world... Surely it's not about my Internet provider, since connecting the PC directly to the Internet cable works fine with no "disconnections".
View 9 Replies View RelatedCisco Routers :: RV220W - Wireless Device Disconnected After 1 Hour
Feb 5, 2013i just setup an RV220W as my home router. Everything connected fine, etc. however, one of my wireless devices (it's a security camera) disconnects after 1 hour. I am able to reconnect the device if I either reboot it, reboot the RV220, or disable / re-enable the Port Forwarding rule I've established for it. Other wireless and wired devices do not have any issues. In the past, I had this same camera working for over two years over wireless while it was connected to a Linksys E2000 router. I enabled the logs on the RV220W last night, and the error message that I receive is: secureBit not set in GTK Msg2. I've got the same SSID on the RV220 that I had on the E2000, same port forwarding, same MAC address client list, etc. Like I said, none of my other wireless or wired devices disconnect at all, just this camera, which worked flawlessly until I switched routers.
View 4 Replies View RelatedCisco Wireless :: 7921 Phones Disconnect Ten Time An Hour
Jun 27, 2011One of my 7921 phones disconnect ten time an hour and during conversations. Sometimes, people who call on this phone are redirected to the answer message.This phone is connected through WIFI network and Cisco Callmanager 4.2 manage all phones (we have about 80 phones on the network). I thought it was a problem with the phone but I exchange with another one and it's exactely the same problem. The problem is just for a line in particular. All the 7921g phones in my company are configured from mac address in the call manager. This problem occured after a storm but I'm not really sure that it's related to.
View 2 Replies View RelatedCisco Routers :: RV-042G With Dual WAN Connections - No Internet After An Hour?
Dec 25, 2012I just upgraded from RV-042 to RV-042G on 24.Dec.
My previous connections are : (1st) 100Mbps ISP connection, (2nd) 200Mbps ISP connection (fibre to home)
Before upgrade, my RV-042 worked very stable.
After using Migration Tools by exporting RV-042 current config and converted to V3 configuration, the converted configuration was imported to RV-042G.
In beginning, RV-042G woks fine after imported converted configuration file. Unfortunately, after around 1 hour of use, my iPad (through an Apple Airport Extreme Station) and wired PC could not browse internet.
But, port-forward to 3 IP-cam still be able to access by my iPhon4 through Carrier 3G connections.
After a reboot of RV-042G, internet connection comes back. But, after an hour of use, the same issue happened again.
RV-042G makes me fluctuated. I will fallback to RV-042 from now on and wait for any further firmware improvement from Cisco/Linksys.
My previous RV-042 and current RV-042G config:-
* WAN1 : 100Mbps ISP connection
* WAN2 : 1Gbips ISP connection ( 200Mbps max throughput)
* LAN1 : connected to Apple Airport Extreme
* LAN2 : connected to Linksys 16-port FastEthernet switch
* LAN3 : idle
* LAN4 : connected to an Intel i7 PC
* Dual WAN link mode with bandwidth management, all internet connection from PC will stick on WAN2
Cisco Routers :: RV120w - FW 1.0.2.6 - Wireless Connection Drops Every Hour
Nov 26, 2012how can i solve this error:
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:40 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
Tue Nov 27 10:55:45 2012(CET) [rv120w][Kernel][KERNEL] ERROR:endChantRecv: protocol PNAC returned !OK
[code]....
i have a wireless device and every 1 hours the connection drops and i must reboot the device