Iomega Prestige HD / Can't Delete Folders From Network Drive
Feb 24, 2012
I have a Iomega Prestige hard drive of 2TB connected to my Linksys E3000 router.I have logged into the router with an admin account, yet I am unable to delete most files. When I try to delete something I get the following error.When I click "Try Again" the file seems to be gone, but it has actually just become invisible, it's still there.I've tried to use Take Ownership, but that just gives an error "Access denied"according to the router settings I should have read and write permissions.When I connect the drive directly to my PC there are no issues.
I have a 1Tb Iomega home media network drive. It normally connects via the network to all my machines (iMac osx, eee pc W7, ubuntu 10). But, something has happened, so now I can see the folders on the network drive but when I click on it (photos, videos etc), it says Windows cannot access \Iomega-0E10FDmovies
Error code: 0x80070043 The network name cannot be found
I have tried disabling the firewall in the router and the W7 eee pc, but nothing has worked.
I have the e4200 v2. I had a hard drive attached to the router. When I try to add files to folders on the drive, sometimes I can add files and sometimes I can't. It is a folder by folder basis. I can't seem to change any security setting that will let me add files to certain folders on the drive attached to the e4200 v2.
I had an Iomega 1TB External Hard Drive connected to my E4200 router. I had shares confgured and they were properly running on the network.
As of yesterday, this all stopped working. The router does not see the drive; it is as though it is not plugged in.
I rebooted the router and it still does not work. I've connected the hard drive directly to my PC to verify that it works there, and it does. The router is running Ver.1.0.03 (Build 14) of firmware (the latest).
I want to access server with different account names at times. After google search, I found that it is something related to "net use drive: /delete" but we usually access different drives so I wonder how to cancel all the drives and what is the exact command.
I moved to Comcast internet yesterday (from 3Mbps DSL), and the E4200 seems to be working well (although somewhere along the way it decided to delete all the files on the NAS drive...an issue for another day). On my laptops and wired PCs I'm now seeing 15-20Mbps down, and 4Mbps up. However, when I connect with my iPhone 3GS, I only see about 7.5Mbps down, and 4Mbps up using online speedtests. I have tried messing with the router settings and resetting all the network settings on the iPhone but nothing changes. I know my iPhone can handle more, because I get 15Mbps down when I visit family (they have a Netgear N300). I can only conclude that my E4200 is the cause.
I correct in understanding that when an external hd is connected to the e3000 via usb, that i can read and write to it, but i cannot delete files from the external drive? i have been trying to figure this out for a while and cannot delete files after i write them.
So I am on my second HDD with Iomega. I am thinking now that this is a router problem rather than a HDD problem. I have a 1TB Iomega home media network drive, eversince I bought my router and began using it I have been unable to use my HDD. It is hard wired to the router via RJ-45 cable and both units have been reset and powered up in about every order you can imagine. I have reset factory defaults on the router and made security changes to ensure there was nothing blocking that port. I am at wits end. I cannot connect to the HDD and the drive flashes yellow and blue indicating it cannot estabilsh or receive an IP address from the router.
I'm trying to set up an Iomega Home Media Network Cloud NAS and I'm having problems with opening ports 50500-50599. I have opened port 80 and 443 successfully and included the above port range above as well, but when I check it on www.yougetsignal.com the ports 50500-50599 are still closed. I even tried to split the range in two parts, and still no success. I have been in contact with my ISP and confirmed they do not block any ports in the 50500-50599 range and that the cable modem (a Motorola SBV5120) is operating in Bridge Mode.
I am a mac user, and whenever I try to open this following link: [URL] to log in my router, nothing happens. Firefox and/or Safari browse the link for a while, but then nothing happens. I am using a Zyxel prestige series 600.
I have bought a new laptop and added it to my home network , two pc's and two laptops all running win 7. I share all drives on all machines. I know this is not very professional but it works for me.From the new laptop I can see all the network and see all the different drive folders but can only access the user folder on any PC from the new laptop. Also I can see the drives on the new laptop but only access the new laptops user folder from any other PC. I have checked this through a LAN cable and wireless with no difference.As the other PC's can see each other as normal I can only think there's a problem with the set up in the new laptop. I also note when I first try and access any other pc from the new laptop I am asked a domain name and password , I can put anything in these boxes and get to see the network but as I said above only access the user folders. I do have password access turned of.
i created a new wireless network by going to network instrastructure and right clicking on pk5000z ap and configure. then set up a network pop up asking for 8 digit pin from the router label i typed the pin in. now that i made a new network the new network shows up instead of my old network.i cant connet to my old network even if i type it in manually. ive tried to delete the new network in manage wireless networks. but it still shows up.
Q1/ I have 2 WinXP laptops on the network. One is WinXP Pro and one is WinXP HomeIn My Network Places of WinXP Home, it can see the WinXP Pro. In WinXP Pro, I have to do a search of the WinXP Home computer in order to detect its existence. WhyQ2/ In both systems, when I tried to access the other computer, a popup screen asked for password. I keyed in the proper password, but I cannot access the computer on the network. I repeatedly keying in the password but had the same result. I turned off the firewall on both systems. Same problem existed. On both systems, "File and Printer Sharing" are enabled in the Firewall exception. And on both systems, I can ping the other system without any problem
I have a STORCENTER IX2-200 CLOUD EDITION in my office with 3 machines hooked up via the router. I cant seem to access users when I enable the security. If i disable security i can get in. This is happening on Windows XP and 7. I've tried Iomega support and it all has to be done via email which is annoying.If i enable security I get the following windows error: \iomegakate is not accessible. you miht not have permission to use this network resource. access is denied.all the machines are logged on as administrator. I did fix this problem although only for a few hours after speaking to Iomega. They advised to use the Net Use command and delete all connections. Ive forgotten what it was now as they remote accessed in.
I am able to ping and remote dial into my Main PC from laptop, but I am not able to access its folders from my laptop. I can access the network folders on my laptop from my Main PC, so I am confused. I have performed the ipconfig release and renew and flush the DNS and still no success.
I am unable to connect to my desktop's shared folders, and get the message "network path not found" when attempting to go into the desktop. The desktop is connected to the router wirelessly, a pace 2wire gateway, and wirelessly on the laptop. I can see it in the list of devices connected to the gateway, as well as the network folder. I am unable to ping my desktop from the laptop, but i can do so the other way around (desktop can ping my laptop). This is despite turning off windows firewall on the desktop. This started happening right when i got the SP2 upgrade for the desktop, it's a vista system.
Have a network set up but it only works on the printer and public folders. Want the network to give me full access to all computers. Desktops and laptop run Win 7. Am familiar with computers. Was an electronics tech, NOT a computer tech, for 15 years and have upgraded / built several computers for family and friends for more than 10 years.
My guess is it would be a lot easier to put what I want to share in a public folder but there is only my wife and me. Guests log onto a "guest" account on the router and do not think they would have access to any folders, public or private, no matter how the network is set up on the main account but not sure.
Don't remember specs exactly but all computers are less than 2 years old. Built desktops with AMD dual core and 6 GB ram. Laptop has Intel Centrino dual core with 4 GB ram. Router is Cisco Linksys E2000. Can get more specific specs if needed. Desktops are wired, laptop is wireless.
I have a small office (7) people and I don't have Active Directory setup. I'm wondering what is the best/easiest way to setup a place on a network server for the team to connect and put files that will then be backed up. With Active Directory this used to be a snap but I don't have much experience outside that realm. Here is how I'd like it to work:1) I login to server as admin, create the individual folders that users can map to. Example: Software Downloads, Jason, Robert, Billy, Carol2) I'd like to be able to set the security on the folders to say that everyone can view certain one but Jason can't view Roberts folder etc.
Sometimes I need to login to server shared folder with different username and password than saved one in "manage network password" or "windows credentials" (windows 7). At that time, I have to delete the previous one in "managed network password", then open the shared folder with new username, again save the old once once it is done.Is there anyway I can just open with different usernames without deleting the saved one? Different users have different privileges in server. Similarly, how to delete temporarily network cached passwords without restarting? I tried net user * /delete but it doesn't work?
I have two computers on a wired network, for simplicity I'll call them computer "A" and computer "B".Computer "A" is running Windows Vista Home Premium SP2, and computer "B" is running Windows XP Home Edition SP3.I can no longer get folders from "B" (XP) to open on "A", I say no longer because I used to be able to get them to open.The folders from "B" appear on the wired network okay when viewed on "A" but when I try to open them I get the message as in the enclosed attachment.I have tried switching off the Firewalls on both computers but that has not worked.
2x DCS-2121 camera.They both record to the same wireless hard disc via my router (airport extreme, with external HD attached. )but when both cameras are on at the same time, they seems to interfere with each other,and regularly delete (all) older recordings of both cameras. (apparently as they "think" the HD is full)
This does NOT happen when only one camera is on.I even tried to record at the lowest possible quality as not to take up too much bandwidth,but problem remains.
I have a windows 7 desktop with an SSD and regular mechanical hard drive where I keep my data. I also have a laptop with a small SSD as well. I wanted to keep the laptop free of non-critical data so I decided to setup a file share between my desktop (Windows 7 home prem) and my laptop (Windows 7 pro). I was able share the files and navigate to my desktop through my laptop. I successfully mapped the folder as a network drive and all was well. Then I rebooted and I was disconnected from it, it remembered that it was there but I needed to manually connect to it and I needed to provide my login credentials. There is no password just a username.
What is causing this and is there a way to get around this? Also is there a way to set a timeout because if my desktop is not on and I want to use my laptop, the boot times are much longer compared to when I don't have the mapped network drive on my laptop at all.
I'm trying to see if I can fix my friend's NAS which apparently has some pretty important data on it that wasn't saved anywhere else. They actually had the Geeksquad look at it and they've come to the same conclusion I have so far, but I figured I would ask the internet before I gave the thing back to them and said Geeksquad was right.
Anyways, they have this 5 drive RAIDed NAS which apparently just stopped showing up on their network. I borrowed it from them to see if I could figure it out. It turns on just fine and my router assigns it an IP address, but the IP address just takes me to a blank LaCie dashboard screen. It's weird because it's clearly running it's web server because it's just a gray background with an empty white box and "(c) LaCie 2010" at the bottom. No content at all.
Additionally, I tried installing the LaCie Network Assistant on my home computer and it says it cannot find any network disks. I've tried the "wake up a device" where I enter the mac address, but that doesn't do anything.
All the lights are solid blue on the front and over all the drives so it doesn't appear a drive has failed or something. Even so, that wouldn't really explain the blank dashboard right?
My WLSE 1030 hard drive failed and I have replaced it with a new drive but when I boot from the 2.15 recovery CD the disc boots and runs, within the console connection I get the error "ERROR: version information not found in flash" the disc is the ejected and the system reboots.How can I reload the system software.
I am connecting the router to a corporate network that assigns "real" IP to it (DHCP). Then I have 3 computers connecting to this router (local IP 192.168.1.2-4).Assuming I want to access a network drive named "ADrive" (on the same corporate LAN) from any of those 3 PCs, how do I do it? ("\ADrive" does not work, neither does replacing the network drive name with its IP, cannot ping either - it's like I'm on a totally separate network).
I'm currently in college, and do most things with my laptop, and I have wifi just about everywhere. It has a generous 500 GB of storage, but I'd like to store non-essential files on, an external hard drive. However, lugging around 3 TB of storage isn't exactly feasible, and with my experience with my current 1.5 TB portable drive, me running around everywhere with it bouncing in my bag is just going to abuse it until it stops functioning (which it has...)[URL]
We have a user that works from home and connects to our network through a VPN when she needs to access files on our server (mapped as a shared drive.)I created a new shared folder on that same server and she can't map a drive to it. It just continuously prompts for username/password.She is running Win 7 Pro, server is Server 2008. The server is on a domain, she is not. She already has a mapped drive to a different folder on the same server as well as to a folder on another server. We are trying to map using the IP address (\IPFolder) and have tried putting the username as IPUsername and just Username with no luck. Tried mapping with net use. Found some stuff online about changing some registry values - tried that. Change the network type from "Home" to "Work" and still no luck.
We have a network drive and it's ip is 192.168.1.3. We have created different users with different permissions for each folders. I have a problem in mapping the network drive in each computer. I can map each folder in them though.I access the drive using run command \192.168.1.3 and it displays all folders. I map the folder but don't know how to map the drive itself.
A program is installed on our server, and I run it on my pc by mapping a network drive to the server's hard drive.I'm sure you all know this procedure.Anyway, I can access the shared drive on the server from my pc, browse, create and delete files on the server, all fine.But, when I try to map the drive, it says:"Windows cannot find 'WEaXA.EXe'. Make sure you typed the name correctly, and then try again."And its only on my pc this happens, on all the other pcs its working fine. And from my pc I can map any other shared folder/drive.
One of my Laptop, I cannot see the Network Share Drive from My Network Place. I am using DNS320 Dlink. But I can ping and I can access web base go inside Network Share drive management. But when I try to ma \sharedrivenamefolder, "Error code 0x80070035 Network path was not found ". I already restart the network drive, router and this computer also cannot. Last time we using vbscript to set at startup and let it map automatically when window boot up every day. Other PC with XP all can access. I cannot upgrade vista to 7 because it's from remote site. But now why cannot I don't know what happen with Fuzzy Vista home.
I have a Windows XP SP3 PC and want to map a drive on it thorugh my wireless network The wireless network has a router (SpeedPort W 701V) that connects to internet, this wireless network is password secured (WPA personal) and open to any device that knows the password.
