Accessing Network Folders?
May 22, 2011
Q1/ I have 2 WinXP laptops on the network. One is WinXP Pro and one is WinXP HomeIn My Network Places of WinXP Home, it can see the WinXP Pro. In WinXP Pro, I have to do a search of the WinXP Home computer in order to detect its existence. WhyQ2/ In both systems, when I tried to access the other computer, a popup screen asked for password. I keyed in the proper password, but I cannot access the computer on the network. I repeatedly keying in the password but had the same result. I turned off the firewall on both systems. Same problem existed. On both systems, "File and Printer Sharing" are enabled in the Firewall exception. And on both systems, I can ping the other system without any problem
View 4 Replies
ADVERTISEMENT
Mar 8, 2012
I have a Windows Home Server v.1 I set it up nearly a year ago, and everything runs fine.I have 3 different user accounts that are password protected.On my PC, i have been running Windows 7 and using the server as my My Documents folder.I recently installed Windows 8 Consumer Preview on an old Hard Drive, and i can't seem to access any folder on the server that isn't already given public permission. Whenever i try to access my User folder i get an access denied message, but no prompt to enter a password so i can use it.
View 3 Replies
View Related
Jan 11, 2013
i have a question about accessing shared folders over the WAN-Port of an DIR-615. For your information: both sides of the network (LAN and WAN) are under my control.
On the WAN-side of the network we have a fileserver with shared files. We can ping the server and reach it and the Websites on this server are also reachable from the LAN-side. But if we try to access to the shared folders the request doesn't reach the server. If we change the router there are no more problems and anything works without problems. The Router has default-settings except the network-settings so it works in our network. Does this router block outgoing traffic on ports 135-139 and/or 445? And when yes is there any way to disable this? I can't find it.
View 4 Replies
View Related
Aug 30, 2011
I have bought a new laptop and added it to my home network , two pc's and two laptops all running win 7. I share all drives on all machines. I know this is not very professional but it works for me.From the new laptop I can see all the network and see all the different drive folders but can only access the user folder on any PC from the new laptop. Also I can see the drives on the new laptop but only access the new laptops user folder from any other PC. I have checked this through a LAN cable and wireless with no difference.As the other PC's can see each other as normal I can only think there's a problem with the set up in the new laptop. I also note when I first try and access any other pc from the new laptop I am asked a domain name and password , I can put anything in these boxes and get to see the network but as I said above only access the user folders. I do have password access turned of.
View 7 Replies
View Related
Mar 14, 2013
I am able to ping and remote dial into my Main PC from laptop, but I am not able to access its folders from my laptop. I can access the network folders on my laptop from my Main PC, so I am confused. I have performed the ipconfig release and renew and flush the DNS and still no success.
View 3 Replies
View Related
Jun 20, 2012
I am unable to connect to my desktop's shared folders, and get the message "network path not found" when attempting to go into the desktop. The desktop is connected to the router wirelessly, a pace 2wire gateway, and wirelessly on the laptop. I can see it in the list of devices connected to the gateway, as well as the network folder. I am unable to ping my desktop from the laptop, but i can do so the other way around (desktop can ping my laptop). This is despite turning off windows firewall on the desktop. This started happening right when i got the SP2 upgrade for the desktop, it's a vista system.
[code]...
View 14 Replies
View Related
Feb 24, 2012
I have a Iomega Prestige hard drive of 2TB connected to my Linksys E3000 router.I have logged into the router with an admin account, yet I am unable to delete most files. When I try to delete something I get the following error.When I click "Try Again" the file seems to be gone, but it has actually just become invisible, it's still there.I've tried to use Take Ownership, but that just gives an error "Access denied"according to the router settings I should have read and write permissions.When I connect the drive directly to my PC there are no issues.
View 4 Replies
View Related
Dec 10, 2011
Have a network set up but it only works on the printer and public folders. Want the network to give me full access to all computers. Desktops and laptop run Win 7. Am familiar with computers. Was an electronics tech, NOT a computer tech, for 15 years and have upgraded / built several computers for family and friends for more than 10 years.
My guess is it would be a lot easier to put what I want to share in a public folder but there is only my wife and me. Guests log onto a "guest" account on the router and do not think they would have access to any folders, public or private, no matter how the network is set up on the main account but not sure.
Don't remember specs exactly but all computers are less than 2 years old. Built desktops with AMD dual core and 6 GB ram. Laptop has Intel Centrino dual core with 4 GB ram. Router is Cisco Linksys E2000. Can get more specific specs if needed. Desktops are wired, laptop is wireless.
View 1 Replies
View Related
Mar 4, 2011
I have a small office (7) people and I don't have Active Directory setup. I'm wondering what is the best/easiest way to setup a place on a network server for the team to connect and put files that will then be backed up. With Active Directory this used to be a snap but I don't have much experience outside that realm. Here is how I'd like it to work:1) I login to server as admin, create the individual folders that users can map to. Example: Software Downloads, Jason, Robert, Billy, Carol2) I'd like to be able to set the security on the folders to say that everyone can view certain one but Jason can't view Roberts folder etc.
View 1 Replies
View Related
Mar 23, 2012
Sometimes I need to login to server shared folder with different username and password than saved one in "manage network password" or "windows credentials" (windows 7). At that time, I have to delete the previous one in "managed network password", then open the shared folder with new username, again save the old once once it is done.Is there anyway I can just open with different usernames without deleting the saved one? Different users have different privileges in server. Similarly, how to delete temporarily network cached passwords without restarting? I tried net user * /delete but it doesn't work?
View 3 Replies
View Related
May 15, 2012
I have two computers on a wired network, for simplicity I'll call them computer "A" and computer "B".Computer "A" is running Windows Vista Home Premium SP2, and computer "B" is running Windows XP Home Edition SP3.I can no longer get folders from "B" (XP) to open on "A", I say no longer because I used to be able to get them to open.The folders from "B" appear on the wired network okay when viewed on "A" but when I try to open them I get the message as in the enclosed attachment.I have tried switching off the Firewalls on both computers but that has not worked.
View 5 Replies
View Related
Apr 22, 2012
I have the e4200 v2. I had a hard drive attached to the router. When I try to add files to folders on the drive, sometimes I can add files and sometimes I can't. It is a folder by folder basis. I can't seem to change any security setting that will let me add files to certain folders on the drive attached to the e4200 v2.
View 6 Replies
View Related
Mar 9, 2011
I am wondering if all routers that have a USB port to which network storage can be attached, support the functionality to enable that storage to be accessed from outside the network. If this is true how (in a conceptual sense) can the router be configured to do this and what are the security implications?
View 2 Replies
View Related
Jun 17, 2011
I am connecting the router to a corporate network that assigns "real" IP to it (DHCP). Then I have 3 computers connecting to this router (local IP 192.168.1.2-4).Assuming I want to access a network drive named "ADrive" (on the same corporate LAN) from any of those 3 PCs, how do I do it? ("\ADrive" does not work, neither does replacing the network drive name with its IP, cannot ping either - it's like I'm on a totally separate network).
View 3 Replies
View Related
Jun 1, 2011
I have 2 computers connected in a LAN. I want to access the other computer through the main one.I do have shared folders (homegroup), but I would like to know how I can get complete access to the other computer via command prompt maybe?
View 4 Replies
View Related
Aug 3, 2011
Setup as follows:
Cisco ASA 5510
Inside 172.17.101.249
outside 5.5.5.2
DMZ 192.168.100.1
I have an internal server 172.16.1.202 that is PAT to 5.5.5.103 to allow RDP connections. - This works fine from the internet.I have now been asked to allow our guest wireless (192.168.100.0/24 - DMZ) to access this same external connection.We have 2 cisco controllers, with the guest controller "anchored" in the DMZ.I cannot get this to work.Both the DMZ and inside NAT their internet connections to 5.5.5.2.
View 4 Replies
View Related
Nov 29, 2012
how to prevent one network fro accessing another network by iptable
View 1 Replies
View Related
Nov 16, 2011
have a home network and access it thru an ATT wireless router. I also have a wireless printer but unable to access it vis the network. I ran ipconfig. I can see ip address for the router, ie, the Ethernet adapter wireless network connections: IP add, Submask, Default, DHCP Class Id. I also see 'Media State....Media Disconnected' Could this affect not having access to the wireless printer?
View 3 Replies
View Related
May 30, 2011
How do I block a particular IP from accessing my network entirely? I have a hacker with a known IP I want to shut out. I tried creating a DENY inbound filter (with just that IP as the range) but that didn't seem to work. that hacker kept being able to attempt logins.
View 7 Replies
View Related
Aug 22, 2012
If possible I would like to have access to my external hard drive from outside of my network.While in the network my laptop connects to the Hard Drive using the shareport. If I take the laptop with me then I would also have to take the External Drive with me.
View 6 Replies
View Related
Mar 28, 2012
I can not access Windows Live Messenger, it will not connect. I can visithotmail.com but not delete or send any e-mails. It says Hotmail is not responding.I can also not access Windows Update. When I search for updates it comes back with error 80072EE2. I also have problems accessing secure websites where I need to pay for something, e-Bay, paypal, make payments off Credit Cards etc.However I can access all websites on my iPhone over the same Wi-Fi. I took the same laptop to 2 other addresses and it works fine at both and able to access all webpages etc!I am running Windows 7 and have tried IE, Safari and Firefox, all with same problems. I am with o2 home broadband and have been with them for years with no problems. I have replaced the router, and have another new router on the way, but am expecting the same problems!
View 1 Replies
View Related
Nov 24, 2011
I'm trying to setup a server with two nics, one of which is connected to the network, and the other connected to a NAS via crossover. I've never done anything with subnetting, but I was thinking I could just set the main nic to 192.168.10.20 with a subnet of 255.255.255.0 and the other to 192.168.10.250 with a subnet of 255.255.255.240 and the nas nic set to 192.168.10.251
Am I thinking through this right, or is there a better way to do this?
View 6 Replies
View Related
Apr 7, 2012
i have an unknown pc accessing my home network. How do I delete/remove this pc
View 1 Replies
View Related
Feb 1, 2011
Is there any way to access the router's configuration pages (192.168.0.1) via the Guest wireless network when routing between the zones is disabled?
Here's the story:
I am using my landlords wireless internet, but I administer the router myself. The router is 'upstairs' and i am 'downstairs' and he has his computer plugged into it plus one wireless laptop. He knows nothing about computers and is vulnerable to downloading viruses (and other ****) and I don't want my computers to be on the same 'network' as his.
I had a brilliant idea that since I am 100% wireless, I can make a guest network, put all my computers on that network and disable routing between them. Now all of my computers (some connected through a wireless bridge) can not see his computers at all (perfect!). The only problem now is I can no longer access the router config pages at 192.168.0.1!
Is there any way I can segregate my computers from his and also access the router config? I've tried accessing the WAN IP for the remote admin pages from inside the NAT, but it still blocks it.
View 6 Replies
View Related
Sep 10, 2012
we have a router with voip phones but no wifi, so i installed a separate wifi router but its ip is 192 range while the LAN is 10.1.1x range, how can i set it up so wirelessley connected PC's have access the file share and internet?
View 5 Replies
View Related
Feb 23, 2011
i'm getting "general network error" while accessing application from server..
client machine: Windows 7
server machine: Windows 2008 server
Switch : 24 port unmanaged D-Link switch ..
network cable: CAT-5 cable.
View 1 Replies
View Related
Aug 7, 2011
I've got the below setup, have the wrt320 setup as a switch / wifi ap, i'm totally unable to access its management page from pc1 but am able to via pc 3, why is this, how can i get around this? Routing? Also am unable to access pc3's resources from pc1..When i enter the ip of the wrt320 it thinks about it and before it has come up with the user/password screen but it soon dissapears and firefox comes up with a "Unable to connect Firefox can't establish a connection to the server at 192.168.0.2." message.
View 1 Replies
View Related
Jul 15, 2012
Just upgraded my system. I am using D-Link 615 as access point hardwired LAN to LAN to ActiveTec MI424WR N capable Verizon Fios Wireless Modem/Router. The Fios Router is set up with WPA2 security. Intend on having three 615s as Access Points off of ActiveTec. Have a number of wireless devices accessing the network. Have followed instructions from manual to use 615 as Access Point, disabling UPnP and the DNCP Server function on the 615. My ActiveTec IP address is 192.168.1.1 and I changed the 615 to 192.168.1.50. I can type this IP address in my browser and get to the 615 set-up.
I have tried a couple different options in naming the SSID on the 615 set-up. If I name the SSID on the 615 the same as the ActiveTec router, when I go to Connect to a wireless signal where there is overlap, there are two signals that one can connect to, named the same SSID, the Fios is WPA2 secured and the 615 is not. Shouldn't these all be on one SSID? It seems that I have two different networks (different SSIDs) instead of one (rather than the 615 simply serving as an extension of the Fios router as a wired remote access point) with different security protocols (WPA2 and None). The SSID name almost seems meaningless. If I name the 615 SSID the same as the Fios router SSID or something different, I still have the option of selecting one SSID that is secure and one that isn't. If I try to connect to the SSID name associated with the 615 I can get on without providing a password.How do I make it so that one can walk around and go from one area to the next and seamlessly move to the best signal? I did read to select different sets of channels for each access point.
View 3 Replies
View Related
May 17, 2011
I recently upgraded from Linksys WRT54G to D-Link DIR-655 firmware version 2.0. All the features are working as advertised however i am having difficulties accessing UPnP services in my network. I have a Samsung 55" internet enabled TV connected to the router and also have few devices that can stream over UPnP to the TV. The option to enable the UPnP is enabled in the router configuration however its not finding devices in the network ... comparing that with Linksys ... all i had to do is enable the UPnP and all my devices discovered each other and started streaming without any issue. What do i need to do in D-Link to enable the UPnP devices ...
View 14 Replies
View Related
Oct 11, 2012
I have an issue with my mail server(SME Server) which is behind a Cisco ASA 5500(firewall) problem is that if one leaves my network they can receive but can not send email via my SMTP also internal people can only send if they use the IP address of the server rather than the domain [URL]
here is my layout
ISP - ASA 5510 - LAN (includes mailserver)
View 7 Replies
View Related
Jul 5, 2011
Got a problem accessing our webservers on the inside interface from other clients on the inside interface on our ASA 5505.As in, they type in url... in their browser, and it wont work.
However, if we use a PC on another outside network, it works just fine! [code]
View 2 Replies
View Related
Apr 24, 2013
I have a Cisco ASA 5505 with the base License. I want to split my network and add a new Internet Access, the first network in Orange works fine. My question is how can i access the file server from the second network (192.168.X.0 /24) ? The 3 switches are Cisco SF300-24P.
View 7 Replies
View Related
Jun 13, 2011
I'm the IT Manager for a Small Non-Profit Organization(facilitating build homes, giving education, health care for the poor).All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even if I'm outside the office.
View 5 Replies
View Related
