I have 2 computers connected in a LAN. I want to access the other computer through the main one.I do have shared folders (homegroup), but I would like to know how I can get complete access to the other computer via command prompt maybe?
View 4 RepliesI have a DGL-4500 D-Link router as a base. And a DAP 1522 Ethernet Bridge I use to connect 3 devices and another router I am looking to host a media Server for the house(on the bridge).
View 5 Replies View RelatedI am wondering if all routers that have a USB port to which network storage can be attached, support the functionality to enable that storage to be accessed from outside the network. If this is true how (in a conceptual sense) can the router be configured to do this and what are the security implications?
View 2 Replies View RelatedI am connecting the router to a corporate network that assigns "real" IP to it (DHCP). Then I have 3 computers connecting to this router (local IP 192.168.1.2-4).Assuming I want to access a network drive named "ADrive" (on the same corporate LAN) from any of those 3 PCs, how do I do it? ("\ADrive" does not work, neither does replacing the network drive name with its IP, cannot ping either - it's like I'm on a totally separate network).
View 3 Replies View RelatedQ1/ I have 2 WinXP laptops on the network. One is WinXP Pro and one is WinXP HomeIn My Network Places of WinXP Home, it can see the WinXP Pro. In WinXP Pro, I have to do a search of the WinXP Home computer in order to detect its existence. WhyQ2/ In both systems, when I tried to access the other computer, a popup screen asked for password. I keyed in the proper password, but I cannot access the computer on the network. I repeatedly keying in the password but had the same result. I turned off the firewall on both systems. Same problem existed. On both systems, "File and Printer Sharing" are enabled in the Firewall exception. And on both systems, I can ping the other system without any problem
View 4 Replies View RelatedSetup as follows:
Cisco ASA 5510
Inside 172.17.101.249
outside 5.5.5.2
DMZ 192.168.100.1
I have an internal server 172.16.1.202 that is PAT to 5.5.5.103 to allow RDP connections. - This works fine from the internet.I have now been asked to allow our guest wireless (192.168.100.0/24 - DMZ) to access this same external connection.We have 2 cisco controllers, with the guest controller "anchored" in the DMZ.I cannot get this to work.Both the DMZ and inside NAT their internet connections to 5.5.5.2.
how to prevent one network fro accessing another network by iptable
View 1 Replies View Relatedhave a home network and access it thru an ATT wireless router. I also have a wireless printer but unable to access it vis the network. I ran ipconfig. I can see ip address for the router, ie, the Ethernet adapter wireless network connections: IP add, Submask, Default, DHCP Class Id. I also see 'Media State....Media Disconnected' Could this affect not having access to the wireless printer?
View 3 Replies View RelatedHow do I block a particular IP from accessing my network entirely? I have a hacker with a known IP I want to shut out. I tried creating a DENY inbound filter (with just that IP as the range) but that didn't seem to work. that hacker kept being able to attempt logins.
View 7 Replies View RelatedIf possible I would like to have access to my external hard drive from outside of my network.While in the network my laptop connects to the Hard Drive using the shareport. If I take the laptop with me then I would also have to take the External Drive with me.
View 6 Replies View RelatedI can not access Windows Live Messenger, it will not connect. I can visithotmail.com but not delete or send any e-mails. It says Hotmail is not responding.I can also not access Windows Update. When I search for updates it comes back with error 80072EE2. I also have problems accessing secure websites where I need to pay for something, e-Bay, paypal, make payments off Credit Cards etc.However I can access all websites on my iPhone over the same Wi-Fi. I took the same laptop to 2 other addresses and it works fine at both and able to access all webpages etc!I am running Windows 7 and have tried IE, Safari and Firefox, all with same problems. I am with o2 home broadband and have been with them for years with no problems. I have replaced the router, and have another new router on the way, but am expecting the same problems!
View 1 Replies View RelatedI'm trying to setup a server with two nics, one of which is connected to the network, and the other connected to a NAS via crossover. I've never done anything with subnetting, but I was thinking I could just set the main nic to 192.168.10.20 with a subnet of 255.255.255.0 and the other to 192.168.10.250 with a subnet of 255.255.255.240 and the nas nic set to 192.168.10.251
Am I thinking through this right, or is there a better way to do this?
i have an unknown pc accessing my home network. How do I delete/remove this pc
View 1 Replies View RelatedIs there any way to access the router's configuration pages (192.168.0.1) via the Guest wireless network when routing between the zones is disabled?
Here's the story:
I am using my landlords wireless internet, but I administer the router myself. The router is 'upstairs' and i am 'downstairs' and he has his computer plugged into it plus one wireless laptop. He knows nothing about computers and is vulnerable to downloading viruses (and other ****) and I don't want my computers to be on the same 'network' as his.
I had a brilliant idea that since I am 100% wireless, I can make a guest network, put all my computers on that network and disable routing between them. Now all of my computers (some connected through a wireless bridge) can not see his computers at all (perfect!). The only problem now is I can no longer access the router config pages at 192.168.0.1!
Is there any way I can segregate my computers from his and also access the router config? I've tried accessing the WAN IP for the remote admin pages from inside the NAT, but it still blocks it.
we have a router with voip phones but no wifi, so i installed a separate wifi router but its ip is 192 range while the LAN is 10.1.1x range, how can i set it up so wirelessley connected PC's have access the file share and internet?
View 5 Replies View Relatedi'm getting "general network error" while accessing application from server..
client machine: Windows 7
server machine: Windows 2008 server
Switch : 24 port unmanaged D-Link switch ..
network cable: CAT-5 cable.
I've got the below setup, have the wrt320 setup as a switch / wifi ap, i'm totally unable to access its management page from pc1 but am able to via pc 3, why is this, how can i get around this? Routing? Also am unable to access pc3's resources from pc1..When i enter the ip of the wrt320 it thinks about it and before it has come up with the user/password screen but it soon dissapears and firefox comes up with a "Unable to connect Firefox can't establish a connection to the server at 192.168.0.2." message.
View 1 Replies View RelatedJust upgraded my system. I am using D-Link 615 as access point hardwired LAN to LAN to ActiveTec MI424WR N capable Verizon Fios Wireless Modem/Router. The Fios Router is set up with WPA2 security. Intend on having three 615s as Access Points off of ActiveTec. Have a number of wireless devices accessing the network. Have followed instructions from manual to use 615 as Access Point, disabling UPnP and the DNCP Server function on the 615. My ActiveTec IP address is 192.168.1.1 and I changed the 615 to 192.168.1.50. I can type this IP address in my browser and get to the 615 set-up.
I have tried a couple different options in naming the SSID on the 615 set-up. If I name the SSID on the 615 the same as the ActiveTec router, when I go to Connect to a wireless signal where there is overlap, there are two signals that one can connect to, named the same SSID, the Fios is WPA2 secured and the 615 is not. Shouldn't these all be on one SSID? It seems that I have two different networks (different SSIDs) instead of one (rather than the 615 simply serving as an extension of the Fios router as a wired remote access point) with different security protocols (WPA2 and None). The SSID name almost seems meaningless. If I name the 615 SSID the same as the Fios router SSID or something different, I still have the option of selecting one SSID that is secure and one that isn't. If I try to connect to the SSID name associated with the 615 I can get on without providing a password.How do I make it so that one can walk around and go from one area to the next and seamlessly move to the best signal? I did read to select different sets of channels for each access point.
I recently upgraded from Linksys WRT54G to D-Link DIR-655 firmware version 2.0. All the features are working as advertised however i am having difficulties accessing UPnP services in my network. I have a Samsung 55" internet enabled TV connected to the router and also have few devices that can stream over UPnP to the TV. The option to enable the UPnP is enabled in the router configuration however its not finding devices in the network ... comparing that with Linksys ... all i had to do is enable the UPnP and all my devices discovered each other and started streaming without any issue. What do i need to do in D-Link to enable the UPnP devices ...
View 14 Replies View RelatedI have an issue with my mail server(SME Server) which is behind a Cisco ASA 5500(firewall) problem is that if one leaves my network they can receive but can not send email via my SMTP also internal people can only send if they use the IP address of the server rather than the domain [URL]
here is my layout
ISP - ASA 5510 - LAN (includes mailserver)
Got a problem accessing our webservers on the inside interface from other clients on the inside interface on our ASA 5505.As in, they type in url... in their browser, and it wont work.
However, if we use a PC on another outside network, it works just fine! [code]
i'm connected to the internet through a shared internet connection through a switch,and also have 3 computers connected to the same switch,what i want to setup a local network between the 3 computers but separated from the internet network?
View 6 Replies View RelatedI have a Cisco ASA 5505 with the base License. I want to split my network and add a new Internet Access, the first network in Orange works fine. My question is how can i access the file server from the second network (192.168.X.0 /24) ? The 3 switches are Cisco SF300-24P.
View 7 Replies View RelatedI'm the IT Manager for a Small Non-Profit Organization(facilitating build homes, giving education, health care for the poor).All computers are connected to a network through a Linksys E1000 Wifi Router and I would like to access all computers remotely especially when I'm on my site visits or when I'm not in the office. Is there a way for me to join the network even if I'm outside the office.
View 5 Replies View RelatedI have an XP machine that is unable to see any other computer on the network. I disabled the firewall and I can ping any device on the network with no issue. I have set several other computers to the same workgroup which is mshome. Lastly I have read several other post and tried the ideas there including this one...Finally, let's do the stack repair.TCP/IP stack repair options for use with Windows XP with SP2.
Start, ]R[/B]un, CMD to open a command prompt:
In the command prompt window that opens, type type the following commands:
Note: Type only the text in bold for the following commands.
Reset TCP/IP stack to installation defaults, type: netsh int ip reset reset.log
Reset WINSOCK entries to installation defaults, type: netsh winsock reset catalog
Reboot the machine.That did not seem to work. As I am still in the same situation.
another note. This is the only XP on the network. Everyone else is Windows 7. Also on a side note, the reason I am doing this is to install a printer on this one and allow the other computers to print from it and seeing folders is good also.
Windows IP Configuration
Host Name . . . . . . . . . . . . : Upstairs
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown[code].....
I have a wireless router which works just fine. I can connect my laptop as well as my iPad to it. I also have a hard wire connection that goes to my computer which works just fine. how can I get my computer to see the other computers in the network? They just don't show up even though I have shared enabled. There is only one router, so I thought it might be automatic, but it doesn't seem to be.
View 2 Replies View RelatedI have two identical computers on the same home network (and a couple of others too). My problem is the even though they are connected to the same wireless router and can each see the internet and the printer that online they cannot see each other. When I ping one from the other I get no response though they both receive responses from the router. I can't transfer files etc. It works a while ago but can't seem to get them connected again.
View 9 Replies View RelatedI have a vista, an xp, and a win7 computer networked. The xp is very temperamnetal, in that it randomly is accessible and just as randomly disappears. i often get the message "Computer (name) is not assessible...." The trouble is most acute in trying to access the xp machine from the win7.
View 4 Replies View RelatedNeed the solution for aboove
View 19 Replies View RelatedI usually access my network computers by typing "\ipaddress" in run command. But sometimes this doesn't work so I have to type the computer name to access it. Similarly, sometimes i could not access with name but could access with ip.
View 7 Replies View RelatedI have a 2008 domain with win7 computers and winxp clients, i am able to see the win7 clients but not the winxp nor the servers in the network neighbourhood, ping works fineI can browse through a system on the network, but unable to have a broad view of the computers
View 1 Replies View Relatedhow to connect 20 computers in a network[/u][/i][/b]
View 1 Replies View RelatedMy home network was made up of a desktop running windows XP home (wired) and a desktop also running XP (wireless). I have recently added a desktop running Windows 7 (wireless) to the system. When I turn on the Windows 7 machine, it sees the other two machines and I use the files from them easily. But after the new machine has been on awhile, it does not see the other computers. (I can, however, still access the shared files on it (the Windows 7 machine) from the other desktop (haven't checked the laptop). If I power down the Windows 7 and then turn it back on, the other machines show up immediately. I've got them all named to the same workgroup and in the network settings in the control panel, I think that it is set to discover the network.
View 4 Replies View Related